Hi Dave,
when you try to register the following phones, what reply you get (except 401) ? also, do you use the same user for all the phones or separate users ?
"max_slot" is just an info. It says what was the maximum records in the location table so far.
Regards, Bogdan
Dave Poirier wrote:
Hello All, I setup my Openser 1.3 and mysql. Authentication seems to work for only the first phone that registers. I did a tcpdump from the server and the rest of the phones get a 401 unauthorized. I can go into mysql and actually see the correct username password in the database. I also double checked it on the phones. Like I said... all three of the phones will register but only if they are the first. Is it something obvious that I'm missing? Anyone else run into this? If I do a "openserctl ul show" (with debug on) I get the following output....
database engine 'MYSQL' loaded Control engine 'FIFO' loaded entering fifo_cmd ul_dump Domain:: location table=512 records=1 max_slot=1 AOR:: 1024 Contact:: sip:1024@172.17.5.118:5060 http://sip:1024@172.17.5.118:5060 Q= Expires:: 2657 Callid:: d35614ae-9db18357-7bd13fe4@172.17.5.118 mailto:d35614ae-9db18357-7bd13fe4@172.17.5.118 Cseq:: 2 User-agent:: PolycomSoundPointIP-SPIP_550-UA/3.0.0.0258 State:: CS_NEW Flags:: 0 Cflag:: 0 Socket:: udp:198.236.66.129:5060 http://198.236.66.129:5060 Methods:: 8063 FIFO command was: :ul_dump:openser_receiver_22488
Is the "max_sot=1" a concern? If so I am at a loss for where to change it.
Thanks for any help, Dave
-- David Poirier
Users mailing list Users@lists.openser.org http://lists.openser.org/cgi-bin/mailman/listinfo/users