[OpenSER-Users] Only a single phone will register - sr-users

24 Apr 2008

Hello All,
I setup my Openser 1.3 and mysql. Authentication seems to work for only the
first phone that registers. I did a tcpdump from the server and the rest of
the phones get a 401 unauthorized. I can go into mysql and actually see the
correct username password in the database. I also double checked it on the
phones. Like I said... all three of the phones will register but only if
they are the first. Is it something obvious that I'm missing? Anyone else
run into this? If I do a "openserctl ul show" (with debug on) I get the
following output....

database engine 'MYSQL' loaded
Control engine 'FIFO' loaded
entering fifo_cmd ul_dump
Domain:: location table=512 records=1 max_slot=1
    AOR:: 1024
        Contact:: sip:1024@172.17.5.118:5060 Q=
            Expires:: 2657
            Callid:: d35614ae-9db18357-7bd13fe4(a)172.17.5.118
            Cseq:: 2
            User-agent:: PolycomSoundPointIP-SPIP_550-UA/3.0.0.0258
            State:: CS_NEW
            Flags:: 0
            Cflag:: 0
            Socket:: udp:198.236.66.129:5060
            Methods:: 8063
FIFO command was:
:ul_dump:openser_receiver_22488

Is the "max_sot=1" a concern? If so I am at a loss for where to change it.

Thanks for any help,
Dave

-- 
David Poirier