Re: [Serusers] SER + Asterisk Voice Mail, delay before redirect

Yes exactly. It's in the block failure_route[1].

I will try your solution the next week I think. Because I'm short in time.

If it's ok, the final idea is to put this value in a table like usr_timeout for example with different value for each username.

What kind of avp_db_load I could be do for this use ?

Thanks a lot !

Le jeudi 11 janvier 2007 à 11:07 +0100, Greger V. Teigre a écrit :

And this is in your failure route, right? do: rewritehostport() append_branch() avp_write("i:10"... t_relay() (or t_relay_to_udp if you really need to force udp) g-)

inge wrote:

...

Hi Greger,

I've two function t_reply_to_udp, use in two conditionnals block. If the flag is 24 and an other with 25. According to the comments it's about the Voicemail. $ The avp_write function is set after these t_reply_to_udp.

To illustrate :

if (isflagset(24)) { if (avp_db_load("$ruri/username","s:vm_uri/usr_vm")) { avp_pushto("$ruri","s:vm_uri"); resetflag(24); prefix("710"); rewritehostport("To_Asterisk"); # Voice Mail IP ADDRESS append_branch(); t_relay_to_udp("Asterisk IP","Asterisk Port"); xlog("..."); avp_write("i:5", "inv_timeout"); break;

Thanks for your support.

Le mercredi 10 janvier 2007 à 09:01 +0100, Greger V. Teigre a écrit :

...

Well, that's the way it is supposed to work. Are you sure the avp is set before you call t_relay? g-)

inge wrote:

...

Hi ram,

Thanks for your answer. I try to change it and it works.

This is the full parameters for tm in my config :

# ------------- tm parameters modparam("tm", "fr_timer", 20) modparam("tm", "wt_timer", 5) modparam("tm", "fr_inv_timer", 15) modparam("tm", "fr_inv_timer_avp", "inv_timeout")

Now, my question is, if I well understand, when I do an avp write on inv_timeout, this should overwrite the default value ? It doesn't seem to work. For example, in my route for voicemail handler I've an avp_write ("i:10", "inv_timeout");

But it's the default value of fr_inv_timer that match (ie. 15 sec).

Thanks for your support.

Le lundi 08 janvier 2007 à 22:44 +0530, ram a écrit :

...

On 1/8/07, inge inge@legos.fr wrote: Hi all,

    I work on an existing configuration of SER. I'm not able to
    find the
    parameter wich define the time in seconds before SER redirect
    call to 
    Asterisk Voice Mail.

    In fact, I want to change this timing to put it in SER DB with
    a
    usr_preferences table like.

    Someone have an idea about the kind of line which could be
    define it ?

    Thanks for your help.

modparam("tm", "fr_timer", 10) modparam("tm", "fr_inv_timer", 35) modparam("tm", "wt_timer", 1)

should do the job.

ram

---

Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

---

Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers