[SR-Users] [Fwd: [sr-dev] WebSocket Server support in Kamailio master]

-------- Forwarded Message -------- From: Peter Dunkley <peter.dunkley(a)crocodile-rcs.com> Reply-to: Development mailing list of the sip-router project <sr-dev(a)lists.sip-router.org> To: sr-dev(a)lists.sip-router.org Subject: [sr-dev] WebSocket Server support in Kamailio master Date: Sat, 7 Jul 2012 18:29:23 +0100 Hello, I have merged the pd/websocket branch into Kamailio master. This means that you can now connect SIP over WebSocket (draft-ibc-sipcore-sip-websocket-02) clients to Kamailio using the "ws://" and "wss://" protocols. Some customisation of the websocket module is possible through modparams, but for most users the defaults should be OK. The WebSocket module uses the xhttp and sl modules for the initial handshake, and (unless you have both a Kamailio installation and WebSocket SIP client supporting GRUU, Outbound[1], and Path[2]) nathelper for request routing and the core force_rport() function for response routing (a new nat_uac_test() has been added to detect whether a message has arrived on a WebSocket). There is an example kamailio.cfg in the websocket module directory. [1] Kamailio does not currently support Outbound [2] I have not updated the Path module for WebSockets I believe that, once Kamailio supports Outbound and WebSocket support is added to the Path module (and you have a SIP over WebSocket client that supports this), it will be possible to use the websocket module without the nathelper module and force_rport() and without needing to change the websocket module or Kamailio core code. If you want to use secure WebSockets (wss) as well as ordinary WebSockets just configure TLS and listen on an appropriate port. I have added WebSocket support to some modules, but there are definitely going to be others (modules/lcr, modules/sipcapture, modules_k/nat_traversal, modules_k/path, modules_k/seas, and modules_k/snmpstats, at least) that need updating too. WebSockets is an unusual transport, so I have put a few notes together for anyone who needs to use it in the code (including adding support to additional modules): - A WebSocket server cannot initiate a WebSocket connection. So a WebSocket connection (over TCP or TLS) is like a TCP/TLS connection coming from behind a NAT. This is why nathelper aliasing and force_rport() is used for the routing, and "set_..._no_connect()" is always used (it's set within the websocket module). - WebSocket (PROTO_WS) and secure WebSocket (PROTO_WSS) connections are just upgraded TCP and TLS connections, so there are no listening sockets for PROTO_WS and PROTO_WSS. This means that, when deciding on what transport is being used, you need to look at the proto set in the tcp_connection, receive_info, and/or dest_info structure for the message - looking at the socket_info structure (that the message has arrived on or will be sent on) will not give you the right answer. - Although WebSocket (PROTO_WS) and secure WebSocket (PROTO_WSS) are different internal protocols there is only one SIP transport type for both ";transport=ws" (WS and WSS are explicitly used in Via: headers though). This means that you can't tell whether the transport parameter in an R-URI, Route/Record-Route, or Contact-URI is for WebSockets or secure WebSockets. As long as the message makes it into the WebSocket module everything will be OK as that module sorts it all out, but it has led to slightly more complex checks being required in some of the code relating to record-routing to handle this - and it may have an effect on other modules too. Please give the new module a go and let me know about any issues you find, Peter -- Peter Dunkley Technical Director Crocodile RCS Ltd _______________________________________________ sr-dev mailing list sr-dev(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev -- Peter Dunkley Technical Director Crocodile RCS Ltd