[SR-Users] dispatcher confusion

Hi! Every time I use the dispatcher(k) module I am confused again. Sometimes it seems that "probing" is a dedicated state, sometimes it seems that "probing" is done also in "active" state, but never in "inactive" state. IMO "probing" should only be a flag which indicates if OPTIONS should sent or not. If probing is successful, then the state should be "active". If probing is unsuccessful, then the state should be "inactive". Current behavior is very strange (ds_probing_mode(0)): --> startup state: A --> no probing kamctl fifo ds_set_state i 1 sip:.... --> state: I --> no probing kamctl fifo ds_set_state a 1 sip:.... --> state: A --> no probing calling 3 times ds_mark_dst("p") --> state: P --> probing (and dst is still loaded as last value into the dst_avp, why?) kamctl fifo ds_set_state i 1 sip:.... --> state: I --> still probing kamctl fifo ds_set_state a 1 sip:.... --> state: P (???) --> probing Thus, "ds_set_state a ..." does not set active, but probing if it was probing before. Strange. And as "inactive" does not stop probing when dst was in probing mode, the destination becomes automatically "active" if the probing succeeds. And why is a destination in probing mode loaded into the dst_avp? Very weird. Is there a reason for this behavior? Thanks Klaus