root@ubuntutest:/kamailio# kamctl fifo which
500 command 'which' not available
do you have the kex module loaded?
Any fifo command that works for you?
Cheers,
Daniel
root@ubuntutest:/kamailio#
*From:* Daniel-Constantin Mierla [mailto:miconda@gmail.com]
*Sent:* Tuesday, January 26, 2010 2:55 PM
*To:* Denis Putyato
*Cc:* users(a)lists.kamailio.org
*Subject:* Re: [Kamailio-Users] LCR module in Kamailio 3.0
On 1/26/10 12:35 PM, Denis Putyato wrote:
I do not use lcr routing in config (only gw table is used).
ok
Not in kamailio 1.5 nor 3.0. I use carrierroute (in 1.5) and now
drouting (in 3.0).
By the way. Recently you helped me with drouting. Can I ask one more
question about this module?
When I try to do "kamctl fifo dr_reload" I receive "500 command
'dr_reload' not available".
do:
kamctl fifo which
Should list available MI commands, is dr_reload there?
Cheers,
Daniel
*From:* Daniel-Constantin Mierla [mailto:miconda@gmail.com]
*Sent:* Tuesday, January 26, 2010 12:43 PM
*To:* Denis Putyato
*Cc:* users(a)lists.kamailio.org <mailto:users@lists.kamailio.org>
*Subject:* Re: [Kamailio-Users] LCR module in Kamailio 3.0
On 1/26/10 10:38 AM, Denis Putyato wrote:
Daniel thank you. Now it's working
welcome! Be sure you understand the idea behind the instances. Not
being a user of lcr don't know exactly the internal architecture, so
as I understood from discussions on mailing lists, you can have more
lcr instance on same kamailio grouped under same value of lcr_id (many
gws and lcr rules with same lcr_id).
Cheers,
Daniel
*From:* Daniel-Constantin Mierla [mailto:miconda@gmail.com]
*Sent:* Tuesday, January 26, 2010 12:31 PM
*To:* Denis Putyato
*Cc:* users(a)lists.kamailio.org <mailto:users@lists.kamailio.org>
*Subject:* Re: [Kamailio-Users] LCR module in Kamailio 3.0
Hello,
On 1/26/10 7:33 AM, Denis Putyato wrote:
Hello everybody!
I have a such problem with LCR module
When I add a new gw in gw table via kamctl addgw or direct via mysql
command, never mind, after doing lcr reload, in memory loaded only gw
with lcr_id = 1.
All other gateways, with lcr_id > 1, not loaded into memory, so I
cannot use them.
(After lcr reload I do lcr dump and only gateways whis lcr_id = 1 can
be seen)
Thank you for any help.
P.S. lcr table, where lcr_id is present too, is empty. It does not
need for processing in my kamailio. Only gw table is used.
Kamailio 3.0 was installed from GIT.
maybe is related to lcr_count parameter:
http://kamailio.org/docs/modules/3.0.x/modules/lcr.html#id2495949
AFAIK, there were some changes in lcr by adding instances, which are
hold in lcr_id (gws to same instance have same id).
Cheers,
Daniel
--
Daniel-Constantin Mierla
*http://www.asipto.com/
--
Daniel-Constantin Mierla
*http://www.asipto.com/
_______________________________________________
Kamailio (OpenSER) - Users mailing list
Users(a)lists.kamailio.org <mailto:Users@lists.kamailio.org>
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
http://lists.openser-project.org/cgi-bin/mailman/listinfo/users
--
Daniel-Constantin Mierla
*http://www.asipto.com/
_______________________________________________
Kamailio (OpenSER) - Users mailing list
Users(a)lists.kamailio.org
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
http://lists.openser-project.org/cgi-bin/mailman/listinfo/users