Re: [Serusers] SER Crash

use_domain This settings solved my problem Andrei. Thanks very much. If you could make a seperate page just for parameter setting for every module it will be very great andrei. If you need my help I can do that for you. I followed the suggestion given by Jiri for multiple domains as below, I think he missed the param for the registrar module which took my head off. fragments: # -- multi-domain modparam("domain", "db_mode", 1) modparam("usrloc|group", "use_domain", 1)modparam("registrar","use_domain",1) ... if (!is_from_local()) { # check against domain-module table .... /* outbound */ break; }; # our domains ... if (!www_authorize("", "subscriber")) { # challenge if none or invalid credentials www_challenge("", "0"); break; }; Thanks a lot. Kannaiyan ----- Original Message ----- From: "Andrei Pelinescu-Onciul" <pelinescu-onciul(a)fokus.fraunhofer.de> To: "Kannaiyan Natesan" <nkans(a)lycos.co.uk> Cc: "Jiri Kuthan" <jiri(a)iptel.org>rg>; <serusers(a)lists.iptel.org> Sent: Thursday, November 27, 2003 8:49 AM Subject: Re: [Serusers] SER Crash > On Nov 27, 2003 at 01:18, Kannaiyan Natesan <nkans(a)lycos.co.uk> wrote: > > SER is only stable from few seconds to few minutes. > > Does it crash? > Do you get a coredump? > > Do you use a cvs head config with 0.8.12? use_domain > > If it still crashes: > > Try to start ser with debugging and loggind to stderr: > ser -dd -E -w. -f your.cfg 2>/tmp/log > (if you use a config not derived from the standard one, you might have > to add log_stderror=yes) > > Before starting ser, run "ulimit -c unlimited" and make sure ser is > allowed to dump core in the current dir (-w .). > If you get the core make a tar.gz with it + ser binaries and sources (if > you compiled it by yourself) and either put it on some web/ftp site or > send it to serhelp(a)lists.iptel.org. > > > Andrei >