29 Jan
2013
29 Jan
'13
4:49 p.m.
Hello, i'm trying to set BLF on my snom 320 phone to get notification on
function key for certain extension as well registered against kamailio.
Any other info i can provide except the following one and as well i want to
exuse me, as i'm pretty noob to all this, and my question might be silly,
but after hours in front of google i found no solution :)
I always get that:
after pua_set_publish() **
3(7825) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg]
l=791 a=16 n=if
3(7825) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg]
l=780 a=41 n=isflagset
3(7825) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg]
l=799 a=16 n=if
3(7825) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg]
l=791 a=25 n=save
3(7825) ERROR: pua [send_publish.c:578]: New PUBLISH and no body found-
invalid request
3(7825) ERROR: pua_usrloc [ul_publish.c:326]: while sending publish
3(7825) ERROR: pua_usrloc [ul_publish.c:327]: TEST: type &
UL_CONTACT_UPDATE is 2, and error is -1
(^^^ This line was added by me into module as i saw related thread and the
patch solution, though it never meets condition and fails to insert from
there as well.)
3(7825) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg]
l=799 a=2 n=exit
my configs are :
in BLF i set
<sip:666@SERV_IP;user=phone>
in cfg i have
alias="SERV_IP"
listen=udp:SERV_IP
port=5060
loadmodule "db_mysql.so"
loadmodule "mi_fifo.so"
loadmodule "kex.so"
loadmodule "tm.so"
loadmodule "tmx.so"
loadmodule "sl.so"
loadmodule "rr.so"
loadmodule "pv.so"
loadmodule "maxfwd.so"
loadmodule "usrloc.so"
loadmodule "registrar.so"
loadmodule "textops.so"
loadmodule "siputils.so"
loadmodule "xlog.so"
loadmodule "sanity.so"
loadmodule "ctl.so"
loadmodule "cfg_rpc.so"
loadmodule "mi_rpc.so"
loadmodule "acc.so"
loadmodule "auth.so"
loadmodule "auth_db.so"
loadmodule "alias_db.so"
loadmodule "speeddial.so"
...
modparam("usrloc", "db_url", DBURL)
modparam("usrloc", "db_mode", 3)
modparam("usrloc", "use_domain", MULTIDOMAIN)
...
modparam("presence", "db_url", DBURL)
modparam("presence", "subs_db_mode" , 3 )
#modparam("presence", "publ_cache", 0)
modparam("presence", "expires_offset", 300)
modparam("presence", "max_expires", 3600)
#modparam("presence", "force_active", 1)
modparam("presence", "db_update_period", 10)
modparam("presence", "server_address", "sip:SERV_IP:5060")
modparam("presence_xml", "db_url", DBURL)
modparam("presence_xml", "force_active", 1)
#modparam("presence_dialoginfo", "force_single_dialog", 1)
modparam("pua", "db_url" ,DBURL )
modparam("pua", "db_mode", 2)
modparam("pua", "db_table", "pua")
#modparam("pua", "outbound_proxy", "sip:SERV_IP")
modparam("pua", "min_expires", 10)
modparam("pua", "default_expires", 3600)
modparam("pua", "update_period", 60)
modparam("pua_usrloc", "default_domain", "SERV_IP")
request_route {
if(method=="NOTIFY")
{
xlog(" pua_update_contact $rm from $fu (IP:$si:$sp) \n");
if(!pua_update_contact())
xlog("pua update failed \n");
}
# per request initial checks
route(REQINIT);
# NAT detection
route(NATDETECT);
# CANCEL processing
if (is_method("CANCEL"))
{
if (t_check_trans())
t_relay();
exit;
}
# handle requests within SIP dialogs
route(WITHINDLG);
### only initial requests (no To tag)
t_check_trans();
# authentication
route(AUTH);
route(SPEEDDIAL);
# record routing for dialog forming requests (in case they are routed)
# - remove preloaded route headers
remove_hf("Route");
if (is_method("INVITE|SUBSCRIBE"))
record_route();
# account only INVITEs
if (is_method("INVITE"))
{
setflag(FLT_ACC); # do accounting
}
# dispatch requests to foreign domains
route(SIPOUT);
### requests for my local domains
# handle presence related requests
route(PRESENCE);
# handle registrations
route(REGISTRAR);
if ($rU==$null)
{
# request with no Username in RURI
sl_send_reply("484","Address Incomplete");
exit;
}
# dispatch destinations to PSTN
route(PSTN);
route(DISPATCH);
# user location service
route(LOCATION);
route(RELAY);
}
route[RELAY] {
# enable additional event routes for forwarded requests
# - serial forking, RTP relaying handling, a.s.o.
if (is_method("INVITE|SUBSCRIBE")) {
t_on_branch("MANAGE_BRANCH");
t_on_reply("MANAGE_REPLY");
}
if (is_method("INVITE")) {
t_on_failure("MANAGE_FAILURE");
}
if (!t_relay()) {
sl_reply_error();
}
exit;
}
# Per SIP request initial checks
route[REQINIT] {
#!ifdef WITH_ANTIFLOOD
# flood dection from same IP and traffic ban for a while
# be sure you exclude checking trusted peers, such as pstn gateways
# - local host excluded (e.g., loop to self)
if(src_ip!=myself)
{
if($sht(ipban=>$si)!=$null)
{
# ip is already blocked
xdbg("request from blocked IP - $rm from $fu (IP:$si:$sp)\n");
exit;
}
if (!pike_check_req())
{
xlog("L_ALERT","ALERT: pike blocking $rm from $fu
(IP:$si:$sp)\n");
$sht(ipban=>$si) = 1;
exit;
}
}
#!endif
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
exit;
}
if(!sanity_check("1511", "7"))
{
xlog("Malformed SIP message from $si:$sp\n");
exit;
}
}
# Handle requests within SIP dialogs
route[WITHINDLG] {
if (has_totag()) {
# sequential request withing a dialog should
# take the path determined by record-routing
if (loose_route()) {
route(DLGURI);
if (is_method("BYE")) {
setflag(FLT_ACC); # do accounting ...
setflag(FLT_ACCFAILED); # ... even if the transaction fails
}
else if ( is_method("ACK") ) {
# ACK is forwarded statelessy
route(NATMANAGE);
}
else if ( is_method("NOTIFY") ) {
# Add Record-Route for in-dialog NOTIFY as per RFC 6665.
record_route();
}
route(RELAY);
} else {
if (is_method("SUBSCRIBE") && uri == myself) {
# in-dialog subscribe requests
route(PRESENCE);
exit;
}
if ( is_method("ACK") ) {
if ( t_check_trans() ) {
# no loose-route, but stateful ACK;
# must be an ACK after a 487
# or e.g. 404 from upstream server
t_relay();
exit;
} else {
# ACK without matching transaction ... ignore and
discard
exit;
}
}
sl_send_reply("404","Not here");
}
exit;
}
}
# Handle SIP registrations
route[REGISTRAR] {
if (is_method("REGISTER"))
{
xlog("pua_set_publish()\n");
if(!pua_set_publish())
xlog("set publish failed \n");
xlog(" after pua_set_publish()\n");
if(isflagset(FLT_NATS))
{
setbflag(FLB_NATB);
# uncomment next line to do SIP NAT pinging
## setbflag(FLB_NATSIPPING);
}
#pua_set_publish();
if (!save("location"))
{
sl_reply_error();
xlog("save location failed \n");
}
exit;
}
}
# USER location service
route[LOCATION] {
#!ifdef WITH_SPEEDIAL
if(uri=~"sip:[0-9]{2}@.*")
xlog("speeddials\n");
# search for short dialing - 2-digit extension
if($rU=~"^[0-9][0-9]$")
if(sd_lookup("speed_dial"))
route(SIPOUT);
#!endif
#!ifdef WITH_ALIASDB
# search in DB-based aliases
if(alias_db_lookup("dbaliases"))
route(SIPOUT);
#!endif
$avp(oexten) = $rU;
if (!lookup("location")) {
$var(rc) = $rc;
route(TOVOICEMAIL);
t_newtran();
switch ($var(rc)) {
case -1:
case -3:
send_reply("404", "Not Found");
exit;
case -2:
send_reply("405", "Method Not Allowed");
exit;
}
}
# when routing via usrloc, log the missed calls also
if (is_method("INVITE"))
{
setflag(FLT_ACCMISSED);
}
}
# Presence server route
route[PRESENCE] {
if(!is_method("PUBLISH|SUBSCRIBE"))
return;
# search for short dialing - 2-digit extension
if($rU=~"^[0-9][0-9]$")
sd_lookup("speed_dial");
route(SPEEDDIAL);
xlog("PUBLISH|SUBSCRIBE");
sl_send_reply("100","trying");
if (!t_newtran())
{
sl_reply_error();
exit;
};
append_to_reply("Contact: <sip:82.80.18.100:5060>\r\n");
if(is_method("PUBLISH"))
{
xlog("handle publish here\n");
handle_publish();
t_release();
}
else
if( is_method("SUBSCRIBE"))
{
handle subscribe here \n");
handle_subscribe();
t_release();
}
exit;
}
# Authentication route
route[AUTH] {
#!ifdef WITH_AUTH
#!ifdef WITH_IPAUTH
if((!is_method("REGISTER")) && allow_source_address())
{
# source IP allowed
return;
}
#!endif
if (is_method("REGISTER") || from_uri==myself)
{
# authenticate requests
if (!auth_check("$fd", "subscriber", "1")) {
auth_challenge("$fd", "0");
exit;
}
# user authenticated - remove auth header
if(!is_method("REGISTER|PUBLISH"))
consume_credentials();
}
# if caller is not local subscriber, then check if it calls
# a local destination, otherwise deny, not an open relay here
if (from_uri!=myself && uri!=myself)
{
sl_send_reply("403","Not relaying");
exit;
}
#!endif
return;
}
# Caller NAT detection route
route[NATDETECT] {
#!ifdef WITH_NAT
force_rport();
if (nat_uac_test("19")) {
if (is_method("REGISTER")) {
fix_nated_register();
} else {
add_contact_alias();
}
setflag(FLT_NATS);
}
#!endif
return;
}
# RTPProxy control
route[NATMANAGE] {
#!ifdef WITH_NAT
if (is_request()) {
if(has_totag()) {
if(check_route_param("nat=yes")) {
setbflag(FLB_NATB);
}
}
}
if (!(isflagset(FLT_NATS) || isbflagset(FLB_NATB)))
return;
rtpproxy_manage();
if (is_request()) {
if (!has_totag()) {
add_rr_param(";nat=yes");
}
}
if (is_reply()) {
if(isbflagset(FLB_NATB)) {
add_contact_alias();
}
}
#!endif
return;
}
# URI update for dialog requests
route[DLGURI] {
#!ifdef WITH_NAT
if(!isdsturiset()) {
handle_ruri_alias();
}
#!endif
return;
}
# Routing to foreign domains
route[SIPOUT] {
if (!uri==myself)
{
append_hf("P-hint: outbound\r\n");
route(RELAY);
}
}
# PSTN GW routing
route[PSTN] {
.......
return;
}
# XMLRPC routing
route[XMLRPC] {
....
}
#!endif
# route to voicemail server
route[TOVOICEMAIL] {
......
return;
}
# manage outgoing branches
branch_route[MANAGE_BRANCH] {
xdbg("new branch [$T_branch_idx] to $ru\n");
route(NATMANAGE);
}
# manage incoming replies
onreply_route[MANAGE_REPLY] {
xdbg("incoming reply\n");
if(status=~"[12][0-9][0-9]")
route(NATMANAGE);
}
# manage failure routing cases
failure_route[MANAGE_FAILURE] {
route(NATMANAGE);
if (t_is_canceled()) {
exit;
}
#!ifdef WITH_BLOCK3XX
# block call redirect based on 3xx replies.
if (t_check_status("3[0-9][0-9]")) {
t_reply("404","Not found");
exit;
}
#!endif
}
route[SPEEDDIAL] {
.....
return;
}
....