[SR-Users] How to check, if call is already handled by rtpengine module?

Hi Running Kamailio Registrar Node + rtpengine without dialog module, only TRX module. Situation: Some customer are in ranges to which RTP can directly be routed, some are not. So rtpengine shall be engaged only when backhauling of the rtp stream is required. On a message from a CPE, this is done by checking $si and on a message to the CPE by checking $(ulc(aor=>addr)[$T_branch_idx]{uri.host}); On a BYE, rtpengine_delete() is called no matter if RTP was backhauled or not. If rtpengine does not find the call to delete, no harm happens. But now I struggle with Session Refresh Re-Invites TO the CPE as they are routed very early on and do not pass the whole location lookup stuff, therefore I have no access to the aor=>addr to determine if the destination needs backhauling or not. So the obvious solution which came to my mind is to call rtpengine_query() and see if it is finding the call and if so, call rtpengine_manage() to keep backhauling traffic on the Re-Invites refrreshing the session. Unfortunately, I found no way to check if rtpengine_query finds the call. Did I miss something? -- Mit freundlichen Grüssen -Benoît Panizzon- @ HomeOffice und normal erreichbar -- I m p r o W a r e A G - Leiter Commerce Kunden ______________________________________________________ Zurlindenstrasse 29 Tel +41 61 826 93 00 CH-4133 Pratteln Fax +41 61 826 93 01 Schweiz Web http://www.imp.ch ______________________________________________________