17 Jul
2020
17 Jul
'20
3:30 a.m.
Hi Karsten.
Regarding Freeswitch, i have done the changes on the Freeswitch.
Regarding the xlog you mention, i am not sure what to do.
On Fri, Jul 17, 2020 at 9:49 AM Karsten Horsmann <khorsmann(a)gmail.com>
wrote:
Hi John,
On Kamailio side you can use xlog to print out log messages from config to
debug. That helps a lot to understand what is going on. You should
configure also syslog for Kamailio correctly.
Also the howto described changes on freeswitch side whare you can use
fs_cli to trace the call if you enable the correct debug level.
It seems for me that your call is not be answered by your freeswitch, but
that's guessing.
Cheers
Karsten
John Tuxies <atuxnull(a)gmail.com> schrieb am Fr., 17. Juli 2020, 07:41:
Thanks for the replies.
By following the command kamailio -c -f kamailio i managed to correct all
the mistakes and now i have Kamailio running with Siremis. Unfortunately i
am not able to place any call anywhere. No error is reported, but the call
hangs there. Even if i press end call, softphones get hanged for around 1
minute!
i do not receive 200OK. Here is the print screen of the call. 192.168.1.7
is one of the softphones and 192.168.1.213 is the Kamailio with Freeswitch
system.
[image: image.png]
I am attaching the kamailio.cfg
Not able to make calls between extensions.
On Thu, Jul 16, 2020 at 10:51 PM Karsten Horsmann <khorsmann(a)gmail.com>
wrote:
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Hi,
Between the howto version and today actual version of Kamailio are many
changes that can generate errors (due for example rename or new module
params in kamailio). So copy paste an howto works not out of the box (if
it's not exactly what the author used).
Start with the shipped default config, then try to adopt the logic step
by step with
kamailio -c -f /etc/kamailio/kamailio.cfg is a great place to check
Syntax fails.
And which Kamailio version you use is also a good way to to describe
your issue.
Cheers
Karsten
David Villasmil <david.villasmil.work(a)gmail.com> schrieb am Do., 16.
Juli 2020, 15:33:
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
What we need are the errors :)
On Thu, 16 Jul 2020 at 13:46, John Tuxies <atuxnull(a)gmail.com> wrote:
> Trying to setup Kamailio with Freeswitch in a Debian machine as in
> the
> http://kb.asipto.com/freeswitch:kamailio-3.3.x-freeswitch-1.2.x-sbc,
> but Kamailio fails to start and gives a ton of errors.
> Before of the alterations Kamailio and Siremis start correctly and i
> can easily create users through Siremis. After the changes to include
> Freeswitch's blocks, it fails to start. All run in the same machine with IP
> 192.168.1.213.
> I am attaching kamailio.cfg (named as test1.txt) if someone could spot
> the error, please. Also i am attaching the kamailio.cfg(Original1.txt) when
> it was working fine with Siremis.
>
>
>
> _______________________________________________
> Kamailio (SER) - Users Mailing List
> sr-users(a)lists.kamailio.org
> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>
--
Regards,
David Villasmil
email: david.villasmil.work(a)gmail.com
phone: +34669448337
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
