Hi John,

On Kamailio side you can use xlog to print out log messages from config to debug. That helps a lot to understand what is going on. You should configure also syslog for Kamailio correctly. 

Also the howto described changes on freeswitch side whare you can use fs_cli to trace the call if you enable the correct debug level. 

It seems for me that your call is not be answered by your freeswitch, but that's guessing. 

Cheers 

Karsten 

John Tuxies <atuxnull@gmail.com> schrieb am Fr., 17. Juli 2020, 07:41:

Thanks for the replies.

By following the command kamailio -c -f kamailio i managed to correct all the mistakes and now i have Kamailio running with Siremis. Unfortunately i am not able to place any call anywhere. No error is reported, but the call hangs there. Even if i press end call, softphones get hanged for around 1 minute!

i do not receive 200OK. Here is the print screen of the call. 192.168.1.7 is one of the softphones and 192.168.1.213 is the Kamailio with Freeswitch system.

I am attaching the kamailio.cfg

Not able to make calls between extensions.

On Thu, Jul 16, 2020 at 10:51 PM Karsten Horsmann <khorsmann@gmail.com> wrote:

Hi,

Between the howto version and today actual version of Kamailio are many changes that can generate errors (due for example rename or new module params in kamailio). So copy paste an howto works not out of the box (if it's not exactly what the author used). 

Start with the shipped default config, then try to adopt the logic step by step with 

kamailio -c -f /etc/kamailio/kamailio.cfg is a great place to check Syntax fails. 

And which Kamailio version you use is also a good way to to describe your issue. 

Cheers 

Karsten 

David Villasmil <david.villasmil.work@gmail.com> schrieb am Do., 16. Juli 2020, 15:33:

What we need are the errors :)

On Thu, 16 Jul 2020 at 13:46, John Tuxies <atuxnull@gmail.com> wrote:

Trying to setup Kamailio with Freeswitch in a Debian machine as in the  http://kb.asipto.com/freeswitch:kamailio-3.3.x-freeswitch-1.2.x-sbc, but Kamailio fails to start and gives a ton of errors.

Before of the alterations Kamailio and Siremis start correctly and i can easily create users through Siremis. After the changes to include Freeswitch's blocks, it fails to start. All run in the same machine with IP 192.168.1.213.

I am attaching kamailio.cfg (named as test1.txt) if someone could spot the error, please. Also i am attaching the kamailio.cfg(Original1.txt) when it was working fine with Siremis.

_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

--

Regards,

David Villasmil

email: david.villasmil.work@gmail.com

phone: +34669448337

_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users