Re: [SR-Users] Debugging and syslog

That was it, I was hoping it was something simple, frustrating I over looked it. Thanks for pointing it out, it is very much appreciated! -Dan From: sr-users-bounces(a)lists.sip-router.org [mailto:sr-users-bounces@lists.sip-router.org] On Behalf Of Daniel-Constantin Mierla Sent: Tuesday, March 26, 2013 5:16 AM To: Kamailio (SER) - Users Mailing List Subject: Re: [SR-Users] Debugging and syslog Hello, you seem to have in your config: #!define WITH_DEBUG which enables: log_stderror=yes meaning that log messages are printed to the terminal, not to syslog. Set: log_stderror=no Cheers, Daniel On 3/25/13 4:30 PM, Daniel W. Graham wrote: I don't have a syslog user, but I have tried changing ownership to the kamailio user. I have changed ownership and permissions several times and nothing seems to do the trick. From: sr-users-bounces@lists.sip-router.org<mailto:sr-users-bounces@lists.sip-router.org> [mailto:sr-users-bounces@lists.sip-router.org] On Behalf Of Barry Flanagan Sent: Monday, March 25, 2013 10:59 AM To: Kamailio (SER) - Users Mailing List Subject: Re: [SR-Users] Debugging and syslog On 21 March 2013 20:12, Daniel W. Graham <dan@cmsinter.net<mailto:dan@cmsinter.net>> wrote: I still cannot get any log messages to appear in my log, this makes it very hard to troubleshoot issues. Does anyone have any idea what the issue could be? Perhaps change the ownership of kamailio.log to the syslog user? Hope this helps -Barry CentOS 6 Doesn't matter if I use default syslog facility and write messages to /var/log/messages or my custom file: local0.* -/var/log/kamailio.log #!define WITH_DEBUG #!ifdef WITH_DEBUG debug=4 log_stderror=yes #!else debug=2 log_stderror=no #!endif memdbg=5 memlog=5 log_facility=LOG_LOCAL0 ------------------------ xlog("L_INFO", "call $fu to $tu for $du - Exceeds quota, call rejected [$avp(s:calls)/$avp(s:call-quota)]\n"); Thanks -Dan From: sr-users-bounces@lists.sip-router.org<mailto:sr-users-bounces@lists.sip-router.org> [mailto:sr-users-bounces@lists.sip-router.org<mailto:sr-users-bounces@lists.sip-router.org>] On Behalf Of Daniel W. Graham Sent: Tuesday, November 27, 2012 8:58 PM To: SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) - Users Mailing List Subject: Re: [SR-Users] Debugging and syslog Running CentOS 6 but I did try something similar with a separate file with no luck. If I use the default syslog.conf file and send messages to default log file, I still get nothing. From: sr-users-bounces@lists.sip-router.org<mailto:sr-users-bounces@lists.sip-router.org> [mailto:sr-users-bounces@lists.sip-router.org]<mailto:[mailto:sr-users-bounces@lists.sip-router.org]> On Behalf Of Konstantin M. Sent: Monday, November 26, 2012 10:25 PM To: SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) - Users Mailing List Subject: Re: [SR-Users] Debugging and syslog If you're running Debian - try out my solution: 1) Edit /etc/rsyslog.d/50-default.conf (or /etc/rsyslog.conf, whatever are located default values for *.*) and change from: auth,authpriv.* /var/log/auth.log *.*;auth,authpriv.none -/var/log/syslog to: auth,authpriv.* /var/log/auth.log *.*;auth,authpriv.none,\ local0.none -/var/log/syslog (just add local0.none) 2) Create new file: /etc/rsyslog.d/kamailio.conf: local0.* -/var/log/kamailio/kamailio.log 3) Create log directory: # mkdir /var/log/kamailio/ 4) Create log file: # touch /var/log/kamailio/kamailio.log 5) Restart rsyslog: # invoke-rc.d rsyslog restart I have the following configuration of logging: #!ifdef WITH_DEBUG debug=4 log_stderror=yes #!else debug=2 log_stderror=no #!endif memdbg=5 memlog=5 log_facility=LOG_LOCAL0 2012/11/27 Daniel W. Graham <dan@cmsinter.net<mailto:dan@cmsinter.net>> Thanks for the reply - I have done that with no luck. -----Original Message----- From: sr-users-bounces@lists.sip-router.org<mailto:sr-users-bounces@lists.sip-router.org> [mailto:sr-users-bounces@lists.sip-router.org<mailto:sr-users-bounces@lists.sip-router.org>] On Behalf Of Iwan Budi Kusnanto Sent: Monday, November 26, 2012 10:10 PM To: SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) - Users Mailing List Subject: Re: [SR-Users] Debugging and syslog touch the log file? restart rsyslog? On Tue, Nov 27, 2012 at 3:38 AM, Daniel W. Graham <dan@cmsinter.net<mailto:dan@cmsinter.net>> wrote: -- Iwan Budi Kusnanto _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org<mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org<mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org<mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org<mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users -- Daniel-Constantin Mierla - http://www.asipto.com http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda Kamailio World Conference, April 16-17, 2013, Berlin - http://conference.kamailio.com -