1 Dec
2003
1 Dec
'03
4:05 p.m.
Have you tried to use DO= ip-address of ser-server instead of ati.com?
I use authentication so I add AUTH-USERNAME=38140299 and
AUTH-PASSWD=xxxxxxxx to the "create sip" command.
Here is one of my configs:
S SWITCH AGET=NORMAL
S SWITCH PORT=WAN IFLT=ON
S SWITCH PORT=LAN1 IFLT=ON
S SWITCH PORT=LAN2 IFLT=ON
S SWITCH PORT=LAN3 IFLT=ON
A VLAN=1 PORT=WAN FRAME=TAGGED
C VLAN=iptnett VID=5
A VLAN=5 PORT=VOIP
A VLAN=5 PORT=WAN FRAME=TAGGED
C VLAN=tvnett VID=10
A VLAN=10 PORT=LAN1,LAN3
A VLAN=10 PORT=WAN FRAME=TAGGED
SET IP INTERFACE=eth0 CONFIGURATION=DHCP
ENABLE TELNET
ENABLE NTP
SET NTP UTCOFFSET=1
ADD NTP SERVER=10.100.10.31 DEFAULT
SET PASSWORD=CIEEHOBB@HHILCHBNADNHA@NGL@B@HIF
ENABLE SIP
CREATE SIP PORT=0 PHNO=38140299 AUTH-USERNAME=38140299
AUTH-PASSWD=xxxxxxxx DO=ipt-server1.ivisjon.no LS=ipt-server1.ivisjon.no
PS=ipt-server1.ivisjon.no CAP=PCMU;PCMA TOS=5
SET PHONE PORT=0 DCALL=VOIP VAD=OFF
I have "ipt-server1.ivisjon.no" in my dns.
Tor.
andyv(a)sympatico.ca wrote:
The RG's are 213
Here are the *.cfg files
#1
SET IP INTERFACE=eth0 IPADDRESS=192.168.20.3 MASK=255.255.255.0
GATEWAY=192.168.20.1
SET LOADER SERVER=192.168.20.10
ENABLE SIP
CREATE SIP PORT=0
PHNO=1001 DO=ati.com LS=192.168.20.4 PS=192.168.20.4 CAP=PCMU;PCMA;G723 TOS=0
SET
PHONE PORT=0 DCALL=VOIP
#2
SET IP INTERFACE=eth0 IPADDRESS=192.168.20.2 MASK=255.255.255.0
GATEWAY=192.168.20.1
SET LOADER SERVER=192.168.20.4
SET DOMAIN=ati.com
ENABLE
SIP
CREATE SIP PORT=0 PHNO=1000 DO=ati.com LS=192.168.20.4 PS=192.168.20.4
CAP=PCMU;PCMA;G723 TOS=0
ENABLE TELNET
SET PHONE PORT=0 DCALL=VOIP
SET
PHONE PORT=1 DCALL=VOIP
---
[This E-mail was scanned for viruses by Declude Virus]
From: Tor Setane <tor.setane(a)ella.no>
Date: Mon, 01 Dec 2003 13:19:00 +0100
To: serusers(a)lists.iptel.org
Subject: [Serusers] Re: Residential Gateways
What kind of gateways are you using? 213 or 613?
I'm using both without any problems. Please post your rg config..
Tor.
---
[This E-mail was scanned for viruses by Declude Virus]
Date: Sun, 30 Nov 2003 19:59:37 -0500
From: "Andy Vander Woude" <andyv(a)sympatico.ca>
Subject: [Serusers] Residential Gateways
To: <serusers(a)lists.iptel.org>
Message-ID: <000001c3b7a6$68560d70$8adaacce@generator>
Content-Type: text/plain; charset="us-ascii"
Running Redhat V9 and have installed the SIP Express Router (ser)
packages. Have two Allied Telesyn Residential Gateways (192.168.20.2 and
192.168.20.3) and laptop (192.168.20.4) running ser connecting to a
managed switch IP address (192.168.20.1 (gateway))
The RG's are configured to access the Proxy server, & Domain server at
192.168.20.4 and the Gateway as 192.168.20.1 The Domain is called
ati.com.
When connected all together I get a dial tone on the phones, however
when I dial the # configured on the RG's I do not get a ring and they do
not register with the ser server. When I type in the "ser start" command
I see the alias entries as "127.0.0.1 localhost localdomain localhost"
and "192.168.20.4 localhost.ati.com localhost"
The entries in the ser.cfg relating to the localdomain have been changed
to ati.com
I have added the 192.168.20.4 to the hosts.cfg relating to the ati.com
domain.
Any idea as to why this configuration is not working. This is a lab
situation with no outside connections.
Thank you.
---
[This E-mail was scanned for viruses by Declude Virus]
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers