sr-users

sr-users@lists.kamailio.org

15 participants
37066 discussions

[Serusers] problems getting started with ser/serweb

by Stephan Reiff-Marganiec

Hi, I have installed ser and was amazed how easy it was to install (we have previously experimented with sipd, which finally runs ...). I have run through the archives and also looked at all the documentation, but some things still don't work. I use kphone 2.11 as client, but have tried sipc on a solaris box to the same extend. I am running kphone and ser 0.8.10 on redhat 8. MySQL is 3.23.52. I have set the domain/realm things to cs.stir.ac.uk and restarted ser. I have then set up a user using "serctl add srm test srm(a)cs.stir.ac.uk". Now, on serweb in user_interface/index I cannot login with this user. In kphone, I cannot register (it works ok on the columbia server): ----kphone says------------------------------------------ SipTransaction: Retransmit 1 (4000) SipClient: Sending: 15:09:37.098 -------------------------------- REGISTER sip:cs.stir.ac.uk SIP/2.0 Via: SIP/2.0/UDP 139.153.254.196:5062 CSeq: 488 REGISTER To: "Stephan" <sip:srm@cs.stir.ac.uk> Expires: 900 From: "Stephan" <sip:srm@cs.stir.ac.uk> Call-ID: 1902284369(a)139.153.254.196 Content-Length: 0 User-Agent: KPhone/2.11 Event: registration Allow-Events: presence Contact: "root" <sip:root@139.153.254.196:5062;transport=udp>;methods="INVITE, MESSAGE, INFO, SUBSCRIBE, OPTIONS, BYE, CANCEL, NOTIFY, ACK" SipClient: Receiving message... SipClient: Received: 15:09:39.724 --------------------------------- SIP/2.0 478 Unresolveable destination (478/TM) Via: SIP/2.0/UDP 139.153.254.196:5062 CSeq: 488 REGISTER To: "Stephan" <sip:srm@cs.stir.ac.uk>;tag=0a96755a1d32d0360b3e454593e5079b-9b73 From: "Stephan" <sip:srm@cs.stir.ac.uk> Call-ID: 1902284369(a)139.153.254.196 Server: Sip EXpress router (0.8.10 (i386/linux)) Content-Length: 0 Warning: 392 139.153.254.196:5060 "Noisy feedback tells: pid=5138 req_src_ip=139.153.254.196 in_uri=sip:cs.stir.ac.uk out_uri=sip:cs.stir.ac.uk via_cnt==1" --- end kphone ----------------------------------------------------- ser does answer, the Replied locally counter in serctl moni reflects this ok. what is wrong? do you need any other files? In case you need more detail, where exactly is the server log?? by the way, I have tried this with auth turned on and off in ser.cfg. and without persistence. always the same ... thanks S -- Dr Stephan Reiff-Marganiec Research Fellow Department of Computing Science; University of Stirling email: srm(a)cs.stir.ac.uk tel: 01786 46 7448 -- The University of Stirling is a university established in Scotland by charter at Stirling, FK9 4LA. Privileged/Confidential Information may be contained in this message. If you are not the addressee indicated in this message (or responsible for delivery of the message to such person), you may not disclose, copy or deliver this message to anyone and any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. In such case, you should destroy this message and kindly notify the sender by reply email. Please advise immediately if you or your employer do not consent to Internet email for messages of this kind. Opinions, conclusions and other information in this message that do not relate to the official business of the University of Stirling shall be understood as neither given nor endorsed by it.

21 years, 3 months

[Serusers] authentication problems

by sunil

hi all, i've downloaded the ser package from you and it is working fine with msn. but as u said i tried for authentication... it is not working properly... i've done - a.uncommented the lines required for authentication... b.changed iptel.org to localhost in www_* (2 places) c.created mysql tables d.did'nt made any changes in mysql tables e.tried to authenticate using admin/heslo and signinname as admin@<myipaddress> f.restarted SER :( again asking for username/pass pl. give ur comments thanks in advance.. best regards sunil __________________________________________________ Do you Yahoo!? Yahoo! Mail Plus - Powerful. Affordable. Sign up now. http://mailplus.yahoo.com

21 years, 3 months

[Serusers] SER on masqueraded/NAT connection

by Craig Graham

I have a Linux box at home acting as a masquerading/NAT gateway for a few Windows PCs, and have installed SER on there in order to use MS Messenger to talk to people outside. SER appears to be working in that I can get Messenger up on two PCs, connect to SER and set up a voice connection between the two PCs. However, I cannot connect to people offsite. Relevant IPChains entries are target prot opt source destination ports ACCEPT udp ----l- anywhere anywhere any -> 5060 ACCEPT udp ------ anywhere anywhere any -> 7070:7080 I have made no changes to the default SIP configuration; it is working as installed by the rpm package ser-0.8.10-1.i386.rpm. A browse through the mailing list archive and through the admin guide doesn't show anything obvious. No errors are reported to /etc/messages or /etc/syslog and serctl moni does not show anything that looks relevant. Does anyone have any suggestions? -- Dr. Craig Graham, Software Engineer Advanced Analysis and Integration Limited, UK. http://www.aail.co.uk/

21 years, 3 months

[Serusers] Moving SDP-related functions into core parser

by Maxim Sobolev

Folks, My nathelper module will need to tweak body of the messages, therefore it will be third module after im and sms that needs body-related functions. IMO it would probably make a lot of sense to move those functions into core parser, so that modules will not have to import im module just to use one or two utility functions. Please let me know what do you think. Thanks! -Maxim

21 years, 3 months

[Serusers] Access control on PSTN gateways

by Michael Graff

We have a group of people who run their own SIP servers (some are SER, some are not) and we are going to be sharing a PSTN gateway (Cisco box). I need to rewrite the identities for the users of our gateway into something that can be presented to the PSTN gateway for billing purposes. We don't want to do that mapping on the gateway itself, for various reasons. How do people handle this situation? Is it wise to put all functionality for user handling and incoming call handling and forwarding to another place in the same SER server? --Michael

21 years, 3 months

[Serusers] encryption on authorization

by Karsten Knüttel

Hi there, In a REGISTER case there is a HeaderField AUTHORIZATION. The usual encryption algorithm is "MD5". Is it possible to REGISTER without any encryption? Please give a statement if I understood everything right or correct me: Digest Username => not encrypted; realm =>not encrypted; URI =>not encrypted; Nonce => encrypted => is Password? Response => encrypted => what´s that? Thanks! P.S.: I sniffered the network traffic when I registerd,established a VoIP-Connection and ended my call. Etherreal, the snifferprogramm, does understand SIP and SDP so I could easy protocol and understand what was going on.

21 years, 3 months

[Serusers] Re: cpl

by Bogdan-Andrei IANCU

Joe_chen wrote: >hi,bogdan > Merry christmas! > Thank you for giving me the jcpl server last time. i have run the jcpl server with ser , but i want to extend or improve some functions,so i need the source code of jcpl server. Can you give me the jcpl server's source codes? if you can ,please send it to my mailbox. > First, sorry for the delay, but I was on vacation! Merry Christmas a A Happy New Year to you also! It's possible for us to send you the sources, but, as I already told you, this java version of the intrpreter will not be maintain or develop any more. We started a C version that will be ready maximum in 4 month - an interpreter as a modul of SER. If you still want the java sources ( under GPL), let me know, and I will send them! Regards, Bogdan PS: for the future, please CC all your emails to "serusers(a)lists.iptel.org"! >Thanks! > Regards,Joe_chen. > > > >

21 years, 3 months

[Serusers] problem with sms module

by Joe_chen

hi, i have compliled and loaded the sms module, then i linked my mobile phone (motorola v998) with my computer on com1 port. when i run ser in debug mode ,the output informations are: .. 0(1515) DEBUG:modem_process: openning modem 0(1515) INFO:initmodem: init modem Motorola on /dev/ttyS0. 0(1515) INFO:initmodem: Checking if Modem is registered to the network 0(1515) NOTICE:initmodem: Waiting 2 sec. before retrying 0(1515) NOTICE:initmodem: Waiting 2 sec. before retrying 0(1515) NOTICE:initmodem: Waiting 2 sec. before retrying 0(1515) NOTICE:initmodem: Waiting 2 sec. before retrying ... the trouble is just like my modem device(motorola v998) doesn't work with my computer. do i need install the modem device drivers ? but i can't find the drivers, and my ser server is running on linux OS,if there are drivers for linux ? the second problem is how i can send sms message to ser, is there another UA supported sending sms? thanks! reguards,Joe_chen

21 years, 3 months

[Serusers] Configuration for radius accounting

by Claudio Thorell dos Santos

Hello, I'm trying to set up radius accounting and has already compiled radius_acc.so, but I'm not shure how to configure it on ser.cfg. What parameters can I use? Is there any document or config example with radius accounting? Thanks and regards, Claudio

21 years, 3 months

[Serusers] How to add fields in INVITE SDP ?

by David.Rio＠alcatel.fr

Hello I am using SER in a test environment as a proxy server. I would like it to add additional fields in the SDP of an INVITE message for some test needs. (e.g. add 'a=sendonly'). Is it possible ? If not possible, do you think it would be difficult to add a function addSdp(<string>) that would append a given string to the SDP of the current message and alter the 'content_length' header field ? I do not see in the 'sip_msg' structure any pointer to the body part of the message ; only pointers to header fields. Thanks for you help -- David Rio Alcatel CIT - Rennes ASD France 33 2 99 87 47 18

21 years, 3 months

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users