- sr-users - kamailio.org

[Serusers] I've added you as a friend on Facebook...
by Nicolas Finetin 05 Oct '07

05 Oct '07

I've requested to add you as a friend on Facebook. You can use Facebook to see the profiles of the people around you, share photos, and connect with friends. Thanks, Nicolas Here's the link: http://www.facebook.com/p.php?i=534261434&k=55MZQ4T3QYTBZELIWJYZ&r&v=2 ___________________ This e-mail may contain promotional materials. If you do not wish to receive future commercial mailings from Facebook, please click on the link below. Facebook's offices are located at 156 University Ave., Palo Alto, CA 94301. http://www.facebook.com/o.php?u=557896866&k=679489

1 0

[OpenSER-Users] carrierroute config examples
by Daryl G. Jurbala 05 Oct '07

05 Oct '07

The module docs are a bit light for someone who doesn't have much OpenSER experience (like myself). Does anyone have a working config example, including sample DB data? Thanks, Daryl

4 4

[Users] AVP management
by Ovidiu Sas 05 Oct '07

05 Oct '07

Hi all, There are modules that are using default values for AVPs. What will happen if another module is reusing the same AVP? Or if the AVP is redefined inside the script? Is this completely orthogonal? Should I worry about this while using AVPs? Regards, Ovidiu Sas

4 6

[OpenSER-Users] Error when connect to Oracle via ODBC.
by Tung Tran 05 Oct '07

05 Oct '07

2 9

[OpenSER-Users] New db_berkeley module
by Will Quan 05 Oct '07

05 Oct '07

All, A new DB module has been submitted to the trunk that incorporates the Berkeley DB into Openser. This module depends on Berkeley DB, which is a high-performance embedded DB kernel. The Berkeley DB offers a couple of architectures: 1. Concurrent Data Store (CDS) 2. Transaction Data Store This module uses the CDS model. One of the main differences between these architectures is DB recovery and robustness (Please refer to the Berkeley DB for full details). In a nutshell, the onus of recovery is on the application (e.g. openser). This modules contains a recovery program utils/db_berkeley/bdb_recover that can be used to recover DB files. Like other DB modules, the DB must be created before Openser can be started. The standard openserdbctl script can be used to create the DB once the Berkeley DB is installed. The module is experimental, and has been tested primarily with registration. **Important** Berkeley DB v4.6.19 contains a bug that will most certainly result in deadlock. There is a patch available for Berkeley DB 4.6.19, and the fix is to be sourced in the next release of 4.6. Special thanks to the authors of dbtext and postgesql modules: dbtext - Daniel-Constantin Mierla postgres - Greg Fausak, Andy Fullford, Norman Brandinger Also thanks to Henning Westerholt for reviewing the code . Regards, William Quan Cisco Systems

1 0

AW: [OpenSER-Users] MSILO: dump stored messages
by Cesar Troncoso 04 Oct '07

04 Oct '07

Hi, thanks for reply my email. I made the following test: I sent five different messages: one two three four five and I traced the SIP traffic passing through the server. They were stored in the DB in the correct sequence. So far so good. Now comes the problem, I saw the IM going out from my SIP Server and the sequence was wrong: three five two four one And exactly in that way appeared the IM in my client when the user went online. In my opinion the IM were not properly sent when they went out from OpenSER Cheers, Cesar -----Ursprüngliche Nachricht----- Von: Daniel-Constantin Mierla [mailto:daniel@voice-system.ro] Gesendet: Donnerstag, 04. Oktober 2007 13:28 An: Cesar Troncoso Cc: users(a)openser.org Betreff: Re: [OpenSER-Users] MSILO: dump stored messages Hello, they should be sent in order of receiving -- however I will double check. Because they are sent in a very short time frame, maybe the get in a different order to the user, because of network transmission. Can you watch the sip traffic sent by proxy? Cheers, Daniel On 10/04/07 13:39, Cesar Troncoso wrote: > > Hello, > > > > I have a problem by using the MSILO Module. The messages stored in the > DB (table SILO) are not sent in the right sequence. Therefore when the > user goes online again and receives the messages previously stored in > the DB, he is not able to understand them. Any Ideas or suggestions > how to deal this problem? > > > > Thanks, > > > > Cesar > > > > ------------------------------------------------------------------------ > > _______________________________________________ > Users mailing list > Users(a)openser.org > http://openser.org/cgi-bin/mailman/listinfo/users >

2 1

[OpenSER-Users] Re:Renaming the DB modules
by lu 04 Oct '07

04 Oct '07

HiBogdan, Ithink it is a great idea, personally i had a lot of problem identifying types of database before.and about the issues of VON materials it will be usefull for us who didnot attend to get the feel of what happened if you will develop the culture of uploading them at OpenSER site... Regards, Lu. On Thu, 2007-10-04 at 14:14 +0200, users-request(a)openser.org wrote: > Send Users mailing list submissions to > users(a)openser.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://openser.org/cgi-bin/mailman/listinfo/users > or, via email, send a message with subject or body 'help' to > users-request(a)openser.org > > You can reach the person managing the list at > users-owner(a)openser.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Users digest..." > > > Today's Topics: > > 1. Re: system variables : isbflagset (Daniel Grotti) > 2. Re: store AVPs with dialog module (Bogdan-Andrei Iancu) > 3. Re: system variables : isbflagset (Klaus Darilion) > 4. Re: OpenSER training and consultants in (Northern) Europe? > (Bogdan-Andrei Iancu) > 5. Re: system variables : isbflagset (Bogdan-Andrei Iancu) > 6. Re: OpenSER Admin Course at VoN Italy ---> documentation? > (Bogdan-Andrei Iancu) > 7. Renaming the DB modules (Bogdan-Andrei Iancu) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Thu, 04 Oct 2007 09:55:42 +0200 > From: Daniel Grotti <daniel.grotti(a)unibo.it> > Subject: Re: [OpenSER-Users] system variables : isbflagset > To: Marcello Lupo <mlist(a)itspecialist.it> > Cc: users(a)openser.org > Message-ID: <47049C7E.6070500(a)unibo.it> > Content-Type: text/plain; charset=UTF-8; format=flowed > > Thank for your answer. > But I'd like to know and read on std output the real value of bflag, not > that it's set. > I don't know if it's possible. > Ex.: > .... > .... > xlog("L_INFO", "the value of branch flag is [STRING]"); > if (method=="INVITE") > { setbflag(6); > xlog("L_INFO","the value of bflag is now [STRING]"); > }; > .... > .. > > so, which kind of [STRING] I have to put in? > Bye > daniel > > Marcello Lupo wrote: > > Hi Daniel, > > > > > > if(isbflagset(6)) { > > xlog("L_NOTICE","BFLAG 6 is SET"); > > } > > > > > > Bye, > > Marcello > > > > Daniel wrote: > >> Hi everybody, > >> > >> I'm using openser 1.2.2 and I'd like to know the result of some > >> expression used in my main route. > >> For exemple, How can I read the answer of "isbflagset (6)" expression > >> and write it on standard output with xlog ? > >> > >> thanks. > >> daniel > >> > >> Daniel > >> ________________________ > >> e-mail : d.grotti(a)gmail.com <mailto:d.grotti@gmail.com> > >> ------------------------------------------------------------------------ > >> > >> _______________________________________________ > >> Users mailing list > >> Users(a)openser.org > >> http://openser.org/cgi-bin/mailman/listinfo/users > > > > > > -- > ------------------------------ > Daniel Grotti > DEIS - Universit di Bologna > ------------------------------ > Via Venezia, 52 > 47023 Cesena (FC) - ITALY > ------------------------------ > email: daniel.grotti(a)unibo.it > ------------------------------ > > > > > > ------------------------------ > > Message: 2 > Date: Thu, 04 Oct 2007 12:22:23 +0300 > From: Bogdan-Andrei Iancu <bogdan(a)voice-system.ro> > Subject: Re: [OpenSER-Users] store AVPs with dialog module > To: Klaus Darilion <klaus.mailinglists(a)pernau.at> > Cc: users(a)openser.org > Message-ID: <4704B0CF.8070407(a)voice-system.ro> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > Hi Klaus, > > currently it is not possible, but I'm flirting with the idea... I plan > to start some work in this direction for 1.4. > > regards, > bogdan > > Klaus Darilion wrote: > > Hi! > > > > Currently, to have AVPs also in in-dialog transaction I store them in > > RR parameters. Would it be possible to store them inside the dialog > > module - from script and from within other modules? > > > > regards > > klaus > > > > _______________________________________________ > > Users mailing list > > Users(a)openser.org > > http://openser.org/cgi-bin/mailman/listinfo/users > > > > > > > ------------------------------ > > Message: 3 > Date: Thu, 04 Oct 2007 11:24:31 +0200 > From: Klaus Darilion <klaus.mailinglists(a)pernau.at> > Subject: Re: [OpenSER-Users] system variables : isbflagset > To: Daniel Grotti <daniel.grotti(a)unibo.it> > Cc: users(a)openser.org > Message-ID: <4704B14F.6000701(a)pernau.at> > Content-Type: text/plain; charset=UTF-8; format=flowed > > A flag is binary, thus it is set or unset - 0 or 1. > > all the flags are stored in a bitfield. You can dump the whole flags > using the pseudo variables: > > http://openser.org/dokuwiki/doku.php/pseudovariables:1.2.x > > $bf - reference to branch flags of branch 0 (RURI) - decimal output > $bF - reference to branch flags of branch 0 (RURI) - hexa output > $mf - reference to flags set for current SIP request > $mF -reference to flags set for current SIP request in hexa > $sf - reference to script flags - decimal output > $sF - reference to script flags - hexa output > > klaus > > Daniel Grotti schrieb: > > Thank for your answer. > > But I'd like to know and read on std output the real value of bflag, not > > that it's set. > > I don't know if it's possible. > > Ex.: > > .... > > .... > > xlog("L_INFO", "the value of branch flag is [STRING]"); > > if (method=="INVITE") > > { setbflag(6); > > xlog("L_INFO","the value of bflag is now [STRING]"); > > }; > > .... > > .. > > > > so, which kind of [STRING] I have to put in? > > Bye > > daniel > > > > Marcello Lupo wrote: > >> Hi Daniel, > >> > >> > >> if(isbflagset(6)) { > >> xlog("L_NOTICE","BFLAG 6 is SET"); > >> } > >> > >> > >> Bye, > >> Marcello > >> > >> Daniel wrote: > >>> Hi everybody, > >>> > >>> I'm using openser 1.2.2 and I'd like to know the result of some > >>> expression used in my main route. > >>> For exemple, How can I read the answer of "isbflagset (6)" expression > >>> and write it on standard output with xlog ? > >>> > >>> thanks. > >>> daniel > >>> > >>> Daniel > >>> ________________________ > >>> e-mail : d.grotti(a)gmail.com <mailto:d.grotti@gmail.com> > >>> ------------------------------------------------------------------------ > >>> > >>> _______________________________________________ > >>> Users mailing list > >>> Users(a)openser.org > >>> http://openser.org/cgi-bin/mailman/listinfo/users > >> > >> > > > > > > ------------------------------ > > Message: 4 > Date: Thu, 04 Oct 2007 12:24:43 +0300 > From: Bogdan-Andrei Iancu <bogdan(a)voice-system.ro> > Subject: Re: [OpenSER-Users] OpenSER training and consultants in > (Northern) Europe? > To: Roy Sigurd Karlsbakk <roy(a)karlsbakk.net> > Cc: OpenSER Users <users(a)openser.org> > Message-ID: <4704B15B.2000609(a)voice-system.ro> > Content-Type: text/plain; charset=windows-1252; format=flowed > > Hi Roy, > > Well.....currently only in English and if interested, Romanian ;)..... > > We are currently investigating to keep the course in different > locations, but no sure plans for the moment.... > All courses will be promptly posted on the web site and lists. > > regards, > bogdan > > Roy Sigurd Karlsbakk wrote: > > Hi all > > > > I became aware of the openser training in Milano some days late, so I > > wondered if there are others across Europe. Language: Scandinavian or > > English. > > > > I am also interested in getting in contact with OpenSER consultants in > > Scandinavia. > > > > Best reagards > > > > roy > > --- > > Roy Sigurd Karlsbakk > > roy(a)karlsbakk.net <mailto:roy@karlsbakk.net> > > Tlf: 98013356 > > --- > > Our enemies are innovative and resourceful, and so are we. They never > > stop thinking about new ways to harm our country and our people, and > > neither do we. - George W. Bush > > > > ------------------------------------------------------------------------ > > > > _______________________________________________ > > Users mailing list > > Users(a)openser.org > > http://openser.org/cgi-bin/mailman/listinfo/users > > > > > > > ------------------------------ > > Message: 5 > Date: Thu, 04 Oct 2007 12:30:29 +0300 > From: Bogdan-Andrei Iancu <bogdan(a)voice-system.ro> > Subject: Re: [OpenSER-Users] system variables : isbflagset > To: Klaus Darilion <klaus.mailinglists(a)pernau.at> > Cc: Daniel Grotti <daniel.grotti(a)unibo.it>, users(a)openser.org > Message-ID: <4704B2B5.2050104(a)voice-system.ro> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > Or using bitwise operations, you dump only the value of a single flag. > > regards, > bogdan > > Klaus Darilion wrote: > > A flag is binary, thus it is set or unset - 0 or 1. > > > > all the flags are stored in a bitfield. You can dump the whole flags > > using the pseudo variables: > > > > http://openser.org/dokuwiki/doku.php/pseudovariables:1.2.x > > > > $bf - reference to branch flags of branch 0 (RURI) - decimal output > > $bF - reference to branch flags of branch 0 (RURI) - hexa output > > $mf - reference to flags set for current SIP request > > $mF -reference to flags set for current SIP request in hexa > > $sf - reference to script flags - decimal output > > $sF - reference to script flags - hexa output > > > > klaus > > > > Daniel Grotti schrieb: > >> Thank for your answer. > >> But I'd like to know and read on std output the real value of bflag, > >> not that it's set. > >> I don't know if it's possible. > >> Ex.: > >> .... > >> .... > >> xlog("L_INFO", "the value of branch flag is [STRING]"); > >> if (method=="INVITE") > >> { setbflag(6); > >> xlog("L_INFO","the value of bflag is now [STRING]"); > >> }; > >> .... > >> .. > >> > >> so, which kind of [STRING] I have to put in? > >> Bye > >> daniel > >> > >> Marcello Lupo wrote: > >>> Hi Daniel, > >>> > >>> > >>> if(isbflagset(6)) { > >>> xlog("L_NOTICE","BFLAG 6 is SET"); > >>> } > >>> > >>> > >>> Bye, > >>> Marcello > >>> > >>> Daniel wrote: > >>>> Hi everybody, > >>>> > >>>> I'm using openser 1.2.2 and I'd like to know the result of some > >>>> expression used in my main route. > >>>> For exemple, How can I read the answer of "isbflagset (6)" > >>>> expression and write it on standard output with xlog ? > >>>> > >>>> thanks. > >>>> daniel > >>>> > >>>> Daniel > >>>> ________________________ > >>>> e-mail : d.grotti(a)gmail.com <mailto:d.grotti@gmail.com> > >>>> ------------------------------------------------------------------------ > >>>> > >>>> > >>>> _______________________________________________ > >>>> Users mailing list > >>>> Users(a)openser.org > >>>> http://openser.org/cgi-bin/mailman/listinfo/users > >>> > >>> > >> > > > > _______________________________________________ > > Users mailing list > > Users(a)openser.org > > http://openser.org/cgi-bin/mailman/listinfo/users > > > > > > > ------------------------------ > > Message: 6 > Date: Thu, 04 Oct 2007 12:33:05 +0300 > From: Bogdan-Andrei Iancu <bogdan(a)voice-system.ro> > Subject: Re: [OpenSER-Users] OpenSER Admin Course at VoN Italy ---> > documentation? > To: Matteo Campana <matteo.campana(a)klarya.it> > Cc: users(a)openser.org > Message-ID: <4704B351.8070905(a)voice-system.ro> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > Hi Matteo, > > The materials will be made available via the VoN document repository - > If this takes too long, probably they will be hosted on the openser site. > > Keep posted. > > regards, > bogdan > > Matteo Campana wrote: > > Hi OpenSer team and ML, > > can I find the slides and the examples of the Rome's conference > > somewhere in the internet ? :) > > > > Regards, > > Matteo. > > -- > > *Ing. Matteo Campana > > System Engineer > > > > Klarya s.r.l.* > > > > Sede Operativa: > > Via Agnini 47 - 41037 Mirandola (MO) > > > > Tel +39 0535 27325 > > > > Fax +39 0535 610050 > > > > Mob +39 320 4258536 > > > > Sede Legale: > > Via Salgari, 17 - 41100 Modena > > > > Tel +39 059 821332 Fax +39 059 821492 > > > > email: matteo.campana(a)klarya.it > > > > web: www.klarya.it > > > > > > * > > **Open Source IP Communications* > > __________________________________________________ > > ------------------------------------------------------------------------ > > > > _______________________________________________ > > Users mailing list > > Users(a)openser.org > > http://openser.org/cgi-bin/mailman/listinfo/users > > > > > > > ------------------------------ > > Message: 7 > Date: Thu, 04 Oct 2007 12:59:56 +0300 > From: Bogdan-Andrei Iancu <bogdan(a)voice-system.ro> > Subject: [OpenSER-Users] Renaming the DB modules > To: devel <devel(a)openser.org>, "users openser.org" <users(a)openser.org> > Message-ID: <4704B99C.300(a)voice-system.ro> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > Hi, > > during the reviewing process of the new DB module for Berkeley, I made > proposal to make a naming convention for all the modules implementing > the DB API. > > I suggest something similar as for the modules implementing the MI > interface, all having the "mi_" prefix. So, for the DB modules we should > use "db_" prefix: > db_berkeley > mysql -> db_mysql > postgres -> db_postgres > dbtext -> db_text > unixodbc -> db_unixodbc > flatstore -> db_flatstore > > > Does anybody see any drawback or problem if we rename the module before 1.3? > > Regards, > bogdan > > > > ------------------------------ > > _______________________________________________ > Users mailing list > Users(a)openser.org > http://openser.org/cgi-bin/mailman/listinfo/users > > > End of Users Digest, Vol 29, Issue 21 > *************************************

1 0

[OpenSER-Users] Renaming the DB modules
by Bogdan-Andrei Iancu 04 Oct '07

04 Oct '07

Hi, during the reviewing process of the new DB module for Berkeley, I made proposal to make a naming convention for all the modules implementing the DB API. I suggest something similar as for the modules implementing the MI interface, all having the "mi_" prefix. So, for the DB modules we should use "db_" prefix: db_berkeley mysql -> db_mysql postgres -> db_postgres dbtext -> db_text unixodbc -> db_unixodbc flatstore -> db_flatstore Does anybody see any drawback or problem if we rename the module before 1.3? Regards, bogdan

4 5

[Serusers] Does the Sip Server run on the CentOS platform was set up on Virtual Machine?
by tran tuan 04 Oct '07

04 Oct '07

I built a Sip Server with CentOS-V5 run on the Virtual Machine.I created 2 subscribers in Mysql server.I started Sip server and Mysql and then used Xlite to registered to Sip server. However, I couldn't registered to Sip server. (Xlite run on XP platform on Real PC).So, I have question: Does the Sip Server run on the CentOS platform was set up on Virtual Machine? --------------------------------- Fussy? Opinionated? Impossible to please? Perfect. Join Yahoo!'s user panel and lay it on us.

2 1

[OpenSER-Users] MSILO: dump stored messages
by Cesar Troncoso 04 Oct '07

04 Oct '07

Hello, I have a problem by using the MSILO Module. The messages stored in the DB (table SILO) are not sent in the right sequence. Therefore when the user goes online again and receives the messages previously stored in the DB, he is not able to understand them. Any Ideas or suggestions how to deal this problem? Thanks, Cesar

2 1

Re: [Serusers] Does the Sip Server run on the CentOS platform was set up on Virtual Machine?
by NEILL WILKINSON 04 Oct '07

04 Oct '07

I have a working version of OpenSER running on Xen guest on RedHat/Fedora 5. So in theory Centos 5 should work.... Neill....;o) ----- Original Message ---- From: tran tuan <tuan83vnn(a)yahoo.com> To: serusers(a)lists.iptel.org Sent: Thursday, 4 October, 2007 9:11:07 AM Subject: [Serusers] Does the Sip Server run on the CentOS platform was set up on Virtual Machine? I built a Sip Server with CentOS-V5 run on the Virtual Machine.I created 2 subscribers in Mysql server.I started Sip server and Mysql and then used Xlite to registered to Sip server. However, I couldn't registered to Sip server. (Xlite run on XP platform on Real PC).So, I have question: Does the Sip Server run on the CentOS platform was set up on Virtual Machine? Fussy? Opinionated? Impossible to please? Perfect. Join Yahoo!'s user panel and lay it on us.

1 0

[OpenSER-Users] OpenSER Admin Course at VoN Italy ---> documentation?
by Matteo Campana 04 Oct '07

04 Oct '07

Hi OpenSer team and ML, can I find the slides and the examples of the Rome's conference somewhere in the internet ? :) Regards, Matteo. -- *Ing. Matteo Campana System Engineer Klarya s.r.l.* Sede Operativa: Via Agnini 47 - 41037 Mirandola (MO) Tel +39 0535 27325 Fax +39 0535 610050 Mob +39 320 4258536 Sede Legale: Via Salgari, 17 - 41100 Modena Tel +39 059 821332 Fax +39 059 821492 email: matteo.campana(a)klarya.it web: www.klarya.it * **Open Source IP Communications* __________________________________________________

2 1

[OpenSER-Users] system variables : isbflagset
by Daniel 04 Oct '07

04 Oct '07

Hi everybody, I'm using openser 1.2.2 and I'd like to know the result of some expression used in my main route. For exemple, How can I read the answer of "isbflagset (6)" expression and write it on standard output with xlog ? thanks. daniel Daniel ________________________ e-mail : d.grotti(a)gmail.com

5 4

[OpenSER-Users] OpenSER training and consultants in (Northern) Europe?
by Roy Sigurd Karlsbakk 04 Oct '07

04 Oct '07

Hi all I became aware of the openser training in Milano some days late, so I wondered if there are others across Europe. Language: Scandinavian or English. I am also interested in getting in contact with OpenSER consultants in Scandinavia. Best reagards roy --- Roy Sigurd Karlsbakk roy(a)karlsbakk.net Tlf: 98013356 --- “Our enemies are innovative and resourceful, and so are we. They never stop thinking about new ways to harm our country and our people, and neither do we.” - George W. Bush

3 3

[OpenSER-Users] store AVPs with dialog module
by Klaus Darilion 04 Oct '07

04 Oct '07

Hi! Currently, to have AVPs also in in-dialog transaction I store them in RR parameters. Would it be possible to store them inside the dialog module - from script and from within other modules? regards klaus

2 1

[OpenSER-Users] How to test openser accounting capability?
by Live Great 04 Oct '07

04 Oct '07

Hi, I have setup openser with its accounting in freebsd 6.2, I am wondering how to test its accounting capability. I also have setup xlite users (2 xlite numbers), but I heard that we can't record accounting info in this way. Thanks Sam

2 1

[OpenSER-Users] SEMS 0.10.0 released
by Stefan Sayer 03 Oct '07

03 Oct '07

Hello, I am happy to announce the release of SEMS 0.10.0 (final). This release brings applications, improvements and features to simplify the creation of integrated VoIP services, many useful examples for application development, eases installation and fixes some issues related to stability. Check it out at http://www.iptel.org/sems . Thanks a lot all sponsors, contributors and users. From the changelog: - new module for exposing internal DI APIs via XMLRPC - new module for triggering calls via DI interface - new DI/XMLRPC controlled conference application, that can for example be used for conference rooms with web interface - CallWatcher and a more powerful dialout function simplifies interfacing to external applications - many examples for quick start of custom service development, for example new serviceline (auto-attendant) application - b2bua implementation with media relay - language awareness of conference application - DB support for conference and voicemail prompts, and announcements - PromptCollection simplifies usage of prompts in applications - b2bua support in py_sems embedded python interpreter - corrected RTP timeout detection - new api for custom logging modules, new in-memory ring buffer logging module - accept all possible payloads and payload switching on the fly (thanks to Maxim Sobolyev/sippysoft) - changing callgroups (media processing threads) in running sessions - support for setting sessions on hold - support for OpenSer 1.3 - substantially improved documentation - 'bundle' install method for easy installation - support for OpenWRT package build ... and many bugfixes SEMS - the media-S in the SLAMP. - apologies if you receive this email several times - -- Stefan Sayer VoIP Services stefan.sayer(a)iptego.de www.iptego.de iptego GmbH Am Borsigturm 40 13507 Berlin Germany Amtsgericht Charlottenburg, HRB 101010 Geschaeftsfuehrer: Alexander Hoffmann

3 5

[OpenSER-Users] Load Balance with 2 OpenSER
by ram 03 Oct '07

03 Oct '07

Hi For high availabilty iam doing with loadbalance with Round Robin could some one suggest what is the best method to do I have a domain xyz.com not static IP use will authenticate I have 2 openser Servers, with 1 Mysql, both teh server need to talk to one Mysql and user should be able to connect any server, depends on availability could some suggest me how can i do this. to have less downtime. or failover ram

2 2

[OpenSER-Users] openser+Asterisk-B2BUA-0.3 version --help required
by srinivas Antarvedi 03 Oct '07

03 Oct '07

Hello all, I thank you people who given me help to find out a solution to prepaid billng so as per one of the users suggestion i tried to install the patch of the b2bua with asterisk 1.4.2 and i want to test whether the radius server is communicating with asterisk or not the few doubts i have at present are 1)how to set radius attributes to radcheck table as i was unable to pass the digest credentials to the radius server 2)the default library file provided with the b2bua is sufficient to talk to the readius server or shall i need to include as we did with openser 3)what about this gateways information in the config file of b2bua help is required thanks in advance srinivas antarvedi i

1 0

Re: [OpenSER-Users] Re: can't get code for the src-leg attribute
by Live Great 03 Oct '07

03 Oct '07

After remeoved the support of DIAMETER mmodule from openser, tt works fine now. I have registered some numbers to it and will test it tonight with remote xlite users. BUT, what is DIAMETER? I read some post in voip forum, someone said it is far too outdated. I am wondering what it is, and what should be used to replace DIAMETER. Thanks for helping me along to solve the issues. Sam ----- Original Message ---- From: Christian Schlatter <cs(a)unc.edu> To: norm(a)goes.com Cc: Live Great <livegreat007(a)yahoo.com>; users(a)openser.org Sent: Wednesday, October 3, 2007 10:44:06 AM Subject: Re: [OpenSER-Users] Re: can't get code for the src-leg attribute Norman Brandinger wrote: > First, > > The three radius messages from the radius log are just INFO messages, > not error messages. This is a good thing. > > Try using the lowest possible unused number for the attributes. My > attributes are in the 240 range. Again, I haven't tested it but perhaps > radius has an upper limit of maybe 255 or maybe 1024. The upper limit is 255 because there is only one byte for RADIUS attribute types. http://www.iana.org/assignments/radius-types I'd suggest to either use 124-223 or 241-255 for things like src/dst-leg. /Christian > > Norm > > > > > Hi Norman, > > > > Thanks for the reply. > > According to your suggestion, I have added the following lines in > raddb/dicitionary: > > ATTRIBUTE Src-Leg 1075 integer > > > > ATTRIBUTE Dst-Leg 1076 integer > > > > > > change in radiusclient-ng/dictionary: > > ATTRIBUTE Src-Leg 1075 integer > > ATTRIBUTE Dst-Leg 1076 integer > > > > change in openser/openser.cfg: > > #modparam("acc", "multi_leg_info", > "src_leg=$avp(i:901);dst_leg=$avp(i:902)") > > modparam("acc", "multi_leg_info", > "Src-Leg=$avp(i:901);Dst-Leg=$avp(i:902)") > > > > Note, I have commented out the original src_leg/dst_leg definition. > > I don't know what is that i:901 and i:902 means, so I simply change > the first letter to upper > > case and change "_" to "-". > > > > Restarted radiusd, and try to start openser then found the following > error in the > > /var/log/messages file: > > ERROR:acc:extra2int: <Src-Leg> is not a number > > > > When I started radiusd, there are info messages written to > /var/log/radiusd.log file: > > Wed Oct 3 09:28:45 2007 : Info: Using deprecated naslist file. > Support for this will go away > > soon. > > Wed Oct 3 09:28:45 2007 : Info: rlm_exec: Wait=yes but no output > defined. Did you mean > > output=none? > > Wed Oct 3 09:28:45 2007 : Info: Ready to process requests. > > > > Thanks > > Sam > > > > ----- Original Message ---- > > > From: Norman Brandinger <norm(a)goes.com> > > To: Live Great <livegreat007(a)yahoo.com> > > Cc: users(a)openser.org > > Sent: Wednesday, October 3, 2007 3:26:40 AM > > Subject: Re: can't get code for the Failed attribute > > > > Hi Sam, > > > > If you altered the dictionary entries, you MUST make sure that your > > openser.cfg, has also been updated. > > > > For example: > > > > modparam("acc", "radius_extra", "Src-Leg=$avp(s:source_leg); > > Dst-Leg=$avp(s:destination_leg)") > > > > Note that Src-Leg and Dst-Leg MUST be in the dictionary for BOTH > > radiusclient-ng AND radiusd. > > > > Regards, > > Norm > > > > Live Great wrote: > >> Hi, > >> > >> In your example, do you meant openser will trainsform Src-Leg to > >> src_leg and Dst-Leg to dst_leg? > >> After I followed your suggestion and changed the definition to, > >> ATTRIBUTE Src-Leg 1075 string > >> ATTRIBUTE Dst-Leg 1076 string > >> > >> I get an error: > >> ERROR: acc: can't get code for the src_leg attribute > >> > >> I have a feeling that it is case sensitive, and openser is looking for > >> src_leg instead Src-Leg. > >> > >> Thanks > >> Sam. > >> > >> > >> ----- Original Message ---- > >> > From: Norman Brandinger <norm(a)goes.com> > >> To: Live Great <livegreat007(a)yahoo.com> > >> Cc: users(a)openser.org > >> Sent: Tuesday, October 2, 2007 9:42:15 PM > >> Subject: Re: can't get code for the Failed attribute > >> > >> Hello Sam, > >> > >> The definition you used: > >> > >> ATTRIBUTE src_leg 0 string > >> > >> Probably isn't valid because "0" is more than likely already being > >> used. Notice that the various ATTRIBUTE numbers are all unique and just > >> increment. So use the next higher number that is available. If the > >> last ATTRIBUTE was 240 then your definition might look like: > >> > >> ATTRIBUTE src_leg 241 string > >> > >> You might also want to consider the general naming convention that is > >> used. The above example would then look as follows: > >> > >> ATTRIBUTE Src-Leg 241 string > >> Note, when you get around to inserting this data into a database, the > >> column name will probably not be allowed to have a dash (unless the > >> column name is quoted). > >> > >> Regards, > >> Norm > >> > >> > >> Live Great wrote: > >> > It looks like it doesn't look up the dictionary files in > >> > /usr/local/share/freeradius/ directory. > >> > But src_leg and dst_leg are not defined in the share directory. > >> > > >> > Sam. > >> > > >> > > >> > ----- Original Message ---- > >> > > From: Live Great <livegreat007(a)yahoo.com> > >> > To: Norman Brandinger <norm(a)goes.com> > >> > Cc: users(a)openser.org > >> > Sent: Tuesday, October 2, 2007 10:17:47 AM > >> > Subject: Re: can't get code for the Failed attribute > >> > > >> > Hi Norman, > >> > > >> > Thank you for the reply. > >> > With the definition of "ATTRIBUTE src_leg 0 string", I got an error > >> > "src_leg is not a number". > >> > After changed it to the following definition, > >> > ATTRIBUTE Acct-Status-Type 40 integer > >> > ATTRIBUTE Service-Type 6 integer > >> > ATTRIBUTE Event-Timestamp 55 integer > >> > ATTRIBUTE Acct-Session-Id 44 string > >> > ATTRIBUTE src_leg 1 integer > >> > ATTRIBUTE dst_leg 1 integer > >> > VALUE Acct-Status-Type Start 1 > >> > VALUE Acct-Status-Type Stop 2 > >> > VALUE Acct-Status-Type Failed 0 > >> > VALUE Service-Type Sip-Session 15 > >> > > >> > I still got this error: > >> > ERROR:acc:extra2int: <src_leg> is not a number > >> > > >> > Thanks > >> > Sam > >> > ----- Original Message ---- > >> > > From: Norman Brandinger <norm(a)goes.com> > >> > To: Live Great <livegreat007(a)yahoo.com> > >> > Cc: users(a)openser.org > >> > Sent: Tuesday, October 2, 2007 9:43:41 AM > >> > Subject: Re: can't get code for the Failed attribute > >> > > >> > Hi Sam, > >> > > >> > In /usr/local/share/freeradius/dictionary.rfc2866 there exists the > >> > following entry: > >> > > >> > VALUE Acct-Status-Type Failed 15 > >> > > >> > I'm not an expert in this area, but it appears that "Failed" is > sort of > >> > predefined. You probably should NOT use "Failed", instead create a > >> > unique attribute such as "failed-reason". This is of course assuming > >> > the rest of your definitions are good. > >> > > >> > Please do not cross-post configuration questions of this type to the > >> > developers mailing list. > >> > > >> > Regards, > >> > Norm > >> > > >> > > >> > Live Great wrote: > >> > > Hi, > >> > > > >> > > After added the following Attributes in the > radiusclient-ng/dictionary > >> > > file: > >> > > ATTRIBUTE src_leg 0 string > >> > > ATTRIBUTE dst_leg 0 string > >> > > ATTRIBUTE Failed 0 string > >> > > > >> > > I got the following error: > >> > > ERROR: acc: can't get code for the Failed attribute value > >> > > > >> > > How to define a proper attribute in the dictionary file? > >> > > Thanks > >> > > Sam > >> > > > >> > > ----- Original Message ---- > >> > > > From: Norman Brandinger <norm(a)goes.com> > >> > > To: Live Great <livegreat007(a)yahoo.com> > >> > > Cc: devel(a)openser.org > >> > > Sent: Monday, October 1, 2007 9:01:54 PM > >> > > Subject: Re: [OpenSER-Devel] can't get code for the > Sip-Response-Code > >> > > attribute > >> > > > >> > > Good Morning, > >> > > > >> > > You need to make sure the dictionary settings are correct and > exactly > >> > > match what you have specified in OpenSER. > >> > > > >> > > The dictionaries are specified in radiusclient-ng and in radiusd > (and > >> > > mediaproxy if you use it) > >> > > > >> > > The error is telling you that "Sip-Response-Code" cannot be found > >> in any > >> > > of the dictionaries you have specified. > >> > > > >> > > Regards, > >> > > Norm > >> > > > >> > > Live Great wrote: > >> > > > Hi, > >> > > > > >> > > > I still can't this work, that's why I posted in the development > >> forum. > >> > > > > >> > > > I have installed openser with *_ACC=ture uncommented in the > >> > acc/Makfile.. > >> > > > But I can't start openser now. > >> > > > Here is the error when I executed /usr/local/etc/rc.d/openser > start: > >> > > > > >> > > > core:rc.d # ./openser start > >> > > > Command Monit to start OpenSER... > >> > > > 'openser' start: /usr/local/etc/rc.d/openser > >> > > > 'openser' failed to start > >> > > > Starting Open SIP Router: > >> > > > Listening on > >> > > > udp: 127.0.0.1 [127.0.0.1]:5060 > >> > > > udp: 12x..x.x..x [12x.x.x.x]:5060 > >> > > > Aliases: > >> > > > udp: xxx..xxx..com.au:5060 > >> > > > udp: localhost.xxx.com.au:5060 > >> > > > udp: localhost:5060 > >> > > > > >> > > > In /var/log/messages: > >> > > > ERROR: acc: can't get code for the Sip-Response-Code attribute > >> > > > ERROR:acc:mod_init: failed to init radius > >> > > > > >> > > > core:rc.d # ps -auxww | grep openser > >> > > > root 35219 0.0 0.1 1520 728 p2 R+ 12:03AM 0:00.00 grep > >> > > openser > >> > > > core:rc.d # ps -auxww | grep radius > >> > > > root 35230 0.0 0.3 5004 3256 ?? Ss 12:04AM 0:00.00 > >> > > > /usr/local/sbin/radiusd > >> > > > core:rc.d # ps -auxww | grep mysql > >> > > > mysql 75881 0.0 0.1 1732 1116 p1- I 20Sep07 0:00.02 > >> /bin/sh > >> > > > /usr/local/bin/mysqld_safe > >> > > > --defaults-extra-file=/usr/local/var/db/mysql/my.cnf --user=mysql > >> > > > --datadir=/usr/local/var/db/mysql > >> > > > --pid-file=/usr/local/var/db/mysql/core.xxx.com.au.pid > >> > > > mysql 75924 0.0 2.7 49016 28336 p1- S 20Sep07 10:52.77 > >> [mysqld] > >> > > > root 35237 0.0 0.1 1544 644 p2 RL+ 12:05AM 0:00.00 grep > >> > mysql > >> > > > > >> > > > Why I got thos acc errors when starting openser? > >> > > > > >> > > > Thanks > >> > > > SW > >> > > > > >> > > > > >> > > > > >> > > > ----- Original Message ---- > >> > > > > From: Norman Brandinger <norm(a)goes.com> > >> > > > To: Live Great <livegreat007(a)yahoo.com> > >> > > > Cc: FreeRadius users mailing list > >> > > > <freeradius-users(a)lists.freeradius.org>; users(a)openser.org > >> > > > Sent: Friday, September 28, 2007 11:11:23 PM > >> > > > Subject: Re: [OpenSER-Users] Failed to compile openser with > >> freeradius > >> > > > support > >> > > > > >> > > > Comment the FREERADIUS=1 in the openser/Makefile > >> > > > > >> > > > Make sure that in modules/acc/Makefile ENABLE_RADIUS_ACC=true > is not > >> > > > commented > >> > > > > >> > > > Regards, > >> > > > Norm > >> > > > > >> > > > > >> > > > Live Great wrote: > >> > > > > HI, > >> > > > > > >> > > > > In FreeBSD 6.2, I got this error when I compiled openser with > >> > > > > freeradius support. > >> > > > > > >> > > > > ../../radius.h:36:32: freeradius-client.h: No such file or > >> directory > >> > > > > acc.c: In function `init_acc_rad': > >> > > > > acc.c:464: warning: assignment makes pointer from integer > without > >> > > a cast > >> > > > > acc.c:475: error: `DICT_ATTR' undeclared (first use in this > >> > function) > >> > > > > acc.c:475: error: (Each undeclared identifier is reported only > >> once > >> > > > > acc.c:475: error: for each function it appears in.) > >> > > > > acc.c:475: error: `da' undeclared (first use in this function) > >> > > > > acc.c:475: error: `DICT_VALUE' undeclared (first use in this > >> > function) > >> > > > > acc.c:475: error: `dv' undeclared (first use in this function) > >> > > > > acc.c: In function `acc_rad_request': > >> > > > > acc.c:509: error: `VALUE_PAIR' undeclared (first use in this > >> > function) > >> > > > > acc.c:514: error: invalid lvalue in assignment > >> > > > > acc.c:555: error: `OK_RC' undeclared (first use in this > function) > >> > > > > gmake[1]: *** [acc.o] Error 1 > >> > > > > gmake[1]: Leaving directory > >> > > > > `/usr/ports/net/openser/work/openser-1.2.2-tls/modules/acc' > >> > > > > gmake: *** [modules] Error 2 > >> > > > > *** Error code 2 > >> > > > > > >> > > > > Stop in /usr/ports/net/openser. > >> > > > > *** Error code 1 > >> > > > > > >> > > > > Is there any way I can compile openser with freeradius support? > >> > > > > > >> > > > > Thanks > >> > > > > SW > >> > > > > > >> > > > >> > ------------------------------------------------------------------------ > >> > > > > >> > > > > >> > > ------------------------------------------------------------------------ > >> > > > > >> > > > _______________________________________________ > >> > > > Devel mailing list > >> > > > Devel(a)openser.org > >> > > > http://openser.org/cgi-bin/mailman/listinfo/devel > >> > > > > >> > > > >> > > > >> > > >> > > >> > > >> > >> > > > > > > > > > > > > > ------------------------------------------------------------------------ > > _______________________________________________ > Users mailing list > Users(a)openser.org > http://openser.org/cgi-bin/mailman/listinfo/users

2 2

[OpenSER-Users] Re: can't get code for the src-leg attribute
by Live Great 03 Oct '07

03 Oct '07

Hi Norman, Thanks for the reply. According to your suggestion, I have added the following lines in raddb/dicitionary: ATTRIBUTE Src-Leg 1075 integer ATTRIBUTE Dst-Leg 1076 integer change in radiusclient-ng/dictionary: ATTRIBUTE Src-Leg 1075 integer ATTRIBUTE Dst-Leg 1076 integer change in openser/openser.cfg: #modparam("acc", "multi_leg_info", "src_leg=$avp(i:901);dst_leg=$avp(i:902)") modparam("acc", "multi_leg_info", "Src-Leg=$avp(i:901);Dst-Leg=$avp(i:902)") Note, I have commented out the original src_leg/dst_leg definition. I don't know what is that i:901 and i:902 means, so I simply change the first letter to upper case and change "_" to "-". Restarted radiusd, and try to start openser then found the following error in the /var/log/messages file: ERROR:acc:extra2int: <Src-Leg> is not a number When I started radiusd, there are info messages written to /var/log/radiusd.log file: Wed Oct 3 09:28:45 2007 : Info: Using deprecated naslist file. Support for this will go away soon. Wed Oct 3 09:28:45 2007 : Info: rlm_exec: Wait=yes but no output defined. Did you mean output=none? Wed Oct 3 09:28:45 2007 : Info: Ready to process requests. Thanks Sam ----- Original Message ---- From: Norman Brandinger <norm(a)goes.com> To: Live Great <livegreat007(a)yahoo.com> Cc: users(a)openser.org Sent: Wednesday, October 3, 2007 3:26:40 AM Subject: Re: can't get code for the Failed attribute Hi Sam, If you altered the dictionary entries, you MUST make sure that your openser.cfg, has also been updated. For example: modparam("acc", "radius_extra", "Src-Leg=$avp(s:source_leg); Dst-Leg=$avp(s:destination_leg)") Note that Src-Leg and Dst-Leg MUST be in the dictionary for BOTH radiusclient-ng AND radiusd. Regards, Norm Live Great wrote: > Hi, > > In your example, do you meant openser will trainsform Src-Leg to > src_leg and Dst-Leg to dst_leg? > After I followed your suggestion and changed the definition to, > ATTRIBUTE Src-Leg 1075 string > ATTRIBUTE Dst-Leg 1076 string > > I get an error: > ERROR: acc: can't get code for the src_leg attribute > > I have a feeling that it is case sensitive, and openser is looking for > src_leg instead Src-Leg. > > Thanks > Sam. > > > ----- Original Message ---- > From: Norman Brandinger <norm(a)goes.com> > To: Live Great <livegreat007(a)yahoo.com> > Cc: users(a)openser.org > Sent: Tuesday, October 2, 2007 9:42:15 PM > Subject: Re: can't get code for the Failed attribute > > Hello Sam, > > The definition you used: > > ATTRIBUTE src_leg 0 string > > Probably isn't valid because "0" is more than likely already being > used. Notice that the various ATTRIBUTE numbers are all unique and just > increment. So use the next higher number that is available. If the > last ATTRIBUTE was 240 then your definition might look like: > > ATTRIBUTE src_leg 241 string > > You might also want to consider the general naming convention that is > used. The above example would then look as follows: > > ATTRIBUTE Src-Leg 241 string > Note, when you get around to inserting this data into a database, the > column name will probably not be allowed to have a dash (unless the > column name is quoted). > > Regards, > Norm > > > Live Great wrote: > > It looks like it doesn't look up the dictionary files in > > /usr/local/share/freeradius/ directory. > > But src_leg and dst_leg are not defined in the share directory. > > > > Sam. > > > > > > ----- Original Message ---- > > From: Live Great <livegreat007(a)yahoo.com> > > To: Norman Brandinger <norm(a)goes.com> > > Cc: users(a)openser.org > > Sent: Tuesday, October 2, 2007 10:17:47 AM > > Subject: Re: can't get code for the Failed attribute > > > > Hi Norman, > > > > Thank you for the reply. > > With the definition of "ATTRIBUTE src_leg 0 string", I got an error > > "src_leg is not a number". > > After changed it to the following definition, > > ATTRIBUTE Acct-Status-Type 40 integer > > ATTRIBUTE Service-Type 6 integer > > ATTRIBUTE Event-Timestamp 55 integer > > ATTRIBUTE Acct-Session-Id 44 string > > ATTRIBUTE src_leg 1 integer > > ATTRIBUTE dst_leg 1 integer > > VALUE Acct-Status-Type Start 1 > > VALUE Acct-Status-Type Stop 2 > > VALUE Acct-Status-Type Failed 0 > > VALUE Service-Type Sip-Session 15 > > > > I still got this error: > > ERROR:acc:extra2int: <src_leg> is not a number > > > > Thanks > > Sam > > ----- Original Message ---- > > From: Norman Brandinger <norm(a)goes.com> > > To: Live Great <livegreat007(a)yahoo.com> > > Cc: users(a)openser.org > > Sent: Tuesday, October 2, 2007 9:43:41 AM > > Subject: Re: can't get code for the Failed attribute > > > > Hi Sam, > > > > In /usr/local/share/freeradius/dictionary.rfc2866 there exists the > > following entry: > > > > VALUE Acct-Status-Type Failed 15 > > > > I'm not an expert in this area, but it appears that "Failed" is sort of > > predefined. You probably should NOT use "Failed", instead create a > > unique attribute such as "failed-reason". This is of course assuming > > the rest of your definitions are good. > > > > Please do not cross-post configuration questions of this type to the > > developers mailing list. > > > > Regards, > > Norm > > > > > > Live Great wrote: > > > Hi, > > > > > > After added the following Attributes in the radiusclient-ng/dictionary > > > file: > > > ATTRIBUTE src_leg 0 string > > > ATTRIBUTE dst_leg 0 string > > > ATTRIBUTE Failed 0 string > > > > > > I got the following error: > > > ERROR: acc: can't get code for the Failed attribute value > > > > > > How to define a proper attribute in the dictionary file? > > > Thanks > > > Sam > > > > > > ----- Original Message ---- > > > From: Norman Brandinger <norm(a)goes.com> > > > To: Live Great <livegreat007(a)yahoo.com> > > > Cc: devel(a)openser.org > > > Sent: Monday, October 1, 2007 9:01:54 PM > > > Subject: Re: [OpenSER-Devel] can't get code for the Sip-Response-Code > > > attribute > > > > > > Good Morning, > > > > > > You need to make sure the dictionary settings are correct and exactly > > > match what you have specified in OpenSER. > > > > > > The dictionaries are specified in radiusclient-ng and in radiusd (and > > > mediaproxy if you use it) > > > > > > The error is telling you that "Sip-Response-Code" cannot be found > in any > > > of the dictionaries you have specified. > > > > > > Regards, > > > Norm > > > > > > Live Great wrote: > > > > Hi, > > > > > > > > I still can't this work, that's why I posted in the development > forum. > > > > > > > > I have installed openser with *_ACC=ture uncommented in the > > acc/Makfile.. > > > > But I can't start openser now. > > > > Here is the error when I executed /usr/local/etc/rc.d/openser start: > > > > > > > > core:rc.d # ./openser start > > > > Command Monit to start OpenSER... > > > > 'openser' start: /usr/local/etc/rc.d/openser > > > > 'openser' failed to start > > > > Starting Open SIP Router: > > > > Listening on > > > > udp: 127.0.0.1 [127.0.0.1]:5060 > > > > udp: 12x..x.x..x [12x.x.x.x]:5060 > > > > Aliases: > > > > udp: xxx..xxx..com.au:5060 > > > > udp: localhost.xxx.com.au:5060 > > > > udp: localhost:5060 > > > > > > > > In /var/log/messages: > > > > ERROR: acc: can't get code for the Sip-Response-Code attribute > > > > ERROR:acc:mod_init: failed to init radius > > > > > > > > core:rc.d # ps -auxww | grep openser > > > > root 35219 0.0 0.1 1520 728 p2 R+ 12:03AM 0:00.00 grep > > > openser > > > > core:rc.d # ps -auxww | grep radius > > > > root 35230 0.0 0.3 5004 3256 ?? Ss 12:04AM 0:00.00 > > > > /usr/local/sbin/radiusd > > > > core:rc.d # ps -auxww | grep mysql > > > > mysql 75881 0.0 0.1 1732 1116 p1- I 20Sep07 0:00.02 > /bin/sh > > > > /usr/local/bin/mysqld_safe > > > > --defaults-extra-file=/usr/local/var/db/mysql/my.cnf --user=mysql > > > > --datadir=/usr/local/var/db/mysql > > > > --pid-file=/usr/local/var/db/mysql/core.xxx.com.au.pid > > > > mysql 75924 0.0 2.7 49016 28336 p1- S 20Sep07 10:52.77 > [mysqld] > > > > root 35237 0.0 0.1 1544 644 p2 RL+ 12:05AM 0:00.00 grep > > mysql > > > > > > > > Why I got thos acc errors when starting openser? > > > > > > > > Thanks > > > > SW > > > > > > > > > > > > > > > > ----- Original Message ---- > > > > From: Norman Brandinger <norm(a)goes.com> > > > > To: Live Great <livegreat007(a)yahoo.com> > > > > Cc: FreeRadius users mailing list > > > > <freeradius-users(a)lists.freeradius.org>; users(a)openser.org > > > > Sent: Friday, September 28, 2007 11:11:23 PM > > > > Subject: Re: [OpenSER-Users] Failed to compile openser with > freeradius > > > > support > > > > > > > > Comment the FREERADIUS=1 in the openser/Makefile > > > > > > > > Make sure that in modules/acc/Makefile ENABLE_RADIUS_ACC=true is not > > > > commented > > > > > > > > Regards, > > > > Norm > > > > > > > > > > > > Live Great wrote: > > > > > HI, > > > > > > > > > > In FreeBSD 6.2, I got this error when I compiled openser with > > > > > freeradius support. > > > > > > > > > > ../../radius.h:36:32: freeradius-client.h: No such file or > directory > > > > > acc.c: In function `init_acc_rad': > > > > > acc.c:464: warning: assignment makes pointer from integer without > > > a cast > > > > > acc.c:475: error: `DICT_ATTR' undeclared (first use in this > > function) > > > > > acc.c:475: error: (Each undeclared identifier is reported only > once > > > > > acc.c:475: error: for each function it appears in.) > > > > > acc.c:475: error: `da' undeclared (first use in this function) > > > > > acc.c:475: error: `DICT_VALUE' undeclared (first use in this > > function) > > > > > acc.c:475: error: `dv' undeclared (first use in this function) > > > > > acc.c: In function `acc_rad_request': > > > > > acc.c:509: error: `VALUE_PAIR' undeclared (first use in this > > function) > > > > > acc.c:514: error: invalid lvalue in assignment > > > > > acc.c:555: error: `OK_RC' undeclared (first use in this function) > > > > > gmake[1]: *** [acc.o] Error 1 > > > > > gmake[1]: Leaving directory > > > > > `/usr/ports/net/openser/work/openser-1.2.2-tls/modules/acc' > > > > > gmake: *** [modules] Error 2 > > > > > *** Error code 2 > > > > > > > > > > Stop in /usr/ports/net/openser. > > > > > *** Error code 1 > > > > > > > > > > Is there any way I can compile openser with freeradius support? > > > > > > > > > > Thanks > > > > > SW > > > > > > > > > ------------------------------------------------------------------------ > > > > > > > > > > ------------------------------------------------------------------------ > > > > > > > > _______________________________________________ > > > > Devel mailing list > > > > Devel(a)openser.org > > > > http://openser.org/cgi-bin/mailman/listinfo/devel > > > > > > > > > > > > > > > > > >

3 3

[OpenSER-Users] Re: can't get code for the src-leg attribute
by Live Great 03 Oct '07

03 Oct '07

I just made another attempt by using your suggestion in the openser.cfg file, it started successfully for a while, that means it has passed the dictionary. But failed another issue with DIAMETER. The configuration I used in openser.cfg is: modparam("acc", "radius_extra", "Src-Leg=$avp(s:source_leg); Dst-Leg=$avp(s:destination_leg)") The error is: acc:init_mytcp(): error connecting to the DIAMETER client ERROR:acc:child_init:: TCP connection not established ERROR:init_mod_child: Error while initializing module acc, rank -5 init_unixsock_server: Error in init_child ERROR: Could not initialize unix domain socket server In the log, I can see Openser is trying to connect 127.0.0:3000. Thanks Sam ----- Original Message ---- From: Live Great <livegreat007(a)yahoo.com> To: Norman Brandinger <norm(a)goes.com> Cc: users(a)openser.org Sent: Wednesday, October 3, 2007 9:34:49 AM Subject: Re: can't get code for the src-leg attribute Hi Norman, Thanks for the reply. According to your suggestion, I have added the following lines in raddb/dicitionary: ATTRIBUTE Src-Leg 1075 integer ATTRIBUTE Dst-Leg 1076 integer change in radiusclient-ng/dictionary: ATTRIBUTE Src-Leg 1075 integer ATTRIBUTE Dst-Leg 1076 integer change in openser/openser.cfg: #modparam("acc", "multi_leg_info", "src_leg=$avp(i:901);dst_leg=$avp(i:902)") modparam("acc", "multi_leg_info", "Src-Leg=$avp(i:901);Dst-Leg=$avp(i:902)") Note, I have commented out the original src_leg/dst_leg definition. I don't know what is that i:901 and i:902 means, so I simply change the first letter to upper case and change "_" to "-". Restarted radiusd, and try to start openser then found the following error in the /var/log/messages file: ERROR:acc:extra2int: <Src-Leg> is not a number When I started radiusd, there are info messages written to /var/log/radiusd.log file: Wed Oct 3 09:28:45 2007 : Info: Using deprecated naslist file. Support for this will go away soon. Wed Oct 3 09:28:45 2007 : Info: rlm_exec: Wait=yes but no output defined. Did you mean output=none? Wed Oct 3 09:28:45 2007 : Info: Ready to process requests. Thanks Sam ----- Original Message ---- From: Norman Brandinger <norm(a)goes.com> To: Live Great <livegreat007(a)yahoo.com> Cc: users(a)openser.org Sent: Wednesday, October 3, 2007 3:26:40 AM Subject: Re: can't get code for the Failed attribute Hi Sam, If you altered the dictionary entries, you MUST make sure that your openser.cfg, has also been updated. For example: modparam("acc", "radius_extra", "Src-Leg=$avp(s:source_leg); Dst-Leg=$avp(s:destination_leg)") Note that Src-Leg and Dst-Leg MUST be in the dictionary for BOTH radiusclient-ng AND radiusd. Regards, Norm Live Great wrote: > Hi, > > In your example, do you meant openser will trainsform Src-Leg to > src_leg and Dst-Leg to dst_leg? > After I followed your suggestion and changed the definition to, > ATTRIBUTE Src-Leg 1075 string > ATTRIBUTE Dst-Leg 1076 string > > I get an error: > ERROR: acc: can't get code for the src_leg attribute > > I have a feeling that it is case sensitive, and openser is looking for > src_leg instead Src-Leg. > > Thanks > Sam. > > > ----- Original Message ---- > From: Norman Brandinger <norm(a)goes.com> > To: Live Great <livegreat007(a)yahoo.com> > Cc: users(a)openser.org > Sent: Tuesday, October 2, 2007 9:42:15 PM > Subject: Re: can't get code for the Failed attribute > > Hello Sam, > > The definition you used: > > ATTRIBUTE src_leg 0 string > > Probably isn't valid because "0" is more than likely already being > used. Notice that the various ATTRIBUTE numbers are all unique and just > increment. So use the next higher number that is available. If the > last ATTRIBUTE was 240 then your definition might look like: > > ATTRIBUTE src_leg 241 string > > You might also want to consider the general naming convention that is > used. The above example would then look as follows: > > ATTRIBUTE Src-Leg 241 string > Note, when you get around to inserting this data into a database, the > column name will probably not be allowed to have a dash (unless the > column name is quoted).. > > Regards, > Norm > > > Live Great wrote: > > It looks like it doesn't look up the dictionary files in > > /usr/local/share/freeradius/ directory. > > But src_leg and dst_leg are not defined in the share directory. > > > > Sam. > > > > > > ----- Original Message ---- > > From: Live Great <livegreat007(a)yahoo.com> > > To: Norman Brandinger <norm(a)goes.com> > > Cc: users(a)openser.org > > Sent: Tuesday, October 2, 2007 10:17:47 AM > > Subject: Re: can't get code for the Failed attribute > > > > Hi Norman, > > > > Thank you for the reply. > > With the definition of "ATTRIBUTE src_leg 0 string", I got an error > > "src_leg is not a number". > > After changed it to the following definition, > > ATTRIBUTE Acct-Status-Type 40 integer > > ATTRIBUTE Service-Type 6 integer > > ATTRIBUTE Event-Timestamp 55 integer > > ATTRIBUTE Acct-Session-Id 44 string > > ATTRIBUTE src_leg 1 integer > > ATTRIBUTE dst_leg 1 integer > > VALUE Acct-Status-Type Start 1 > > VALUE Acct-Status-Type Stop 2 > > VALUE Acct-Status-Type Failed 0 > > VALUE Service-Type Sip-Session 15 > > > > I still got this error: > > ERROR:acc:extra2int: <src_leg> is not a number > > > > Thanks > > Sam > > ----- Original Message ---- > > From: Norman Brandinger <norm(a)goes.com> > > To: Live Great <livegreat007(a)yahoo.com> > > Cc: users(a)openser.org > > Sent: Tuesday, October 2, 2007 9:43:41 AM > > Subject: Re: can't get code for the Failed attribute > > > > Hi Sam, > > > > In /usr/local/share/freeradius/dictionary.rfc2866 there exists the > > following entry: > > > > VALUE Acct-Status-Type Failed 15 > > > > I'm not an expert in this area, but it appears that "Failed" is sort of > > predefined. You probably should NOT use "Failed", instead create a > > unique attribute such as "failed-reason". This is of course assuming > > the rest of your definitions are good. > > > > Please do not cross-post configuration questions of this type to the > > developers mailing list. > > > > Regards, > > Norm > > > > > > Live Great wrote: > > > Hi, > > > > > > After added the following Attributes in the radiusclient-ng/dictionary > > > file: > > > ATTRIBUTE src_leg 0 string > > > ATTRIBUTE dst_leg 0 string > > > ATTRIBUTE Failed 0 string > > > > > > I got the following error: > > > ERROR: acc: can't get code for the Failed attribute value > > > > > > How to define a proper attribute in the dictionary file? > > > Thanks > > > Sam > > > > > > ----- Original Message ---- > > > From: Norman Brandinger <norm(a)goes.com> > > > To: Live Great <livegreat007(a)yahoo.com> > > > Cc: devel(a)openser.org > > > Sent: Monday, October 1, 2007 9:01:54 PM > > > Subject: Re: [OpenSER-Devel] can't get code for the Sip-Response-Code > > > attribute > > > > > > Good Morning, > > > > > > You need to make sure the dictionary settings are correct and exactly > > > match what you have specified in OpenSER. > > > > > > The dictionaries are specified in radiusclient-ng and in radiusd (and > > > mediaproxy if you use it) > > > > > > The error is telling you that "Sip-Response-Code" cannot be found > in any > > > of the dictionaries you have specified. > > > > > > Regards, > > > Norm > > > > > > Live Great wrote: > > > > Hi, > > > > > > > > I still can't this work, that's why I posted in the development > forum. > > > > > > > > I have installed openser with *_ACC=ture uncommented in the > > acc/Makfile. > > > > But I can't start openser now. > > > > Here is the error when I executed /usr/local/etc/rc.d/openser start: > > > > > > > > core:rc.d # ./openser start > > > > Command Monit to start OpenSER... > > > > 'openser' start: /usr/local/etc/rc.d/openser > > > > 'openser' failed to start > > > > Starting Open SIP Router: > > > > Listening on > > > > udp: 127.0.0.1 [127.0.0.1]:5060 > > > > udp: 12x.x.x..x [12x.x.x.x]:5060 > > > > Aliases: > > > > udp: xxx.xxx..com.au:5060 > > > > udp: localhost.xxx.com.au:5060 > > > > udp: localhost:5060 > > > > > > > > In /var/log/messages: > > > > ERROR: acc: can't get code for the Sip-Response-Code attribute > > > > ERROR:acc:mod_init: failed to init radius > > > > > > > > core:rc.d # ps -auxww | grep openser > > > > root 35219 0.0 0.1 1520 728 p2 R+ 12:03AM 0:00.00 grep > > > openser > > > > core:rc.d # ps -auxww | grep radius > > > > root 35230 0.0 0.3 5004 3256 ?? Ss 12:04AM 0:00.00 > > > > /usr/local/sbin/radiusd > > > > core:rc.d # ps -auxww | grep mysql > > > > mysql 75881 0.0 0.1 1732 1116 p1- I 20Sep07 0:00.02 > /bin/sh > > > > /usr/local/bin/mysqld_safe > > > > --defaults-extra-file=/usr/local/var/db/mysql/my.cnf --user=mysql > > > > --datadir=/usr/local/var/db/mysql > > > > --pid-file=/usr/local/var/db/mysql/core.xxx.com.au.pid > > > > mysql 75924 0.0 2.7 49016 28336 p1- S 20Sep07 10:52.77 > [mysqld] > > > > root 35237 0.0 0.1 1544 644 p2 RL+ 12:05AM 0:00.00 grep > > mysql > > > > > > > > Why I got thos acc errors when starting openser? > > > > > > > > Thanks > > > > SW > > > > > > > > > > > > > > > > ----- Original Message ---- > > > > From: Norman Brandinger <norm(a)goes.com> > > > > To: Live Great <livegreat007(a)yahoo.com> > > > > Cc: FreeRadius users mailing list > > > > <freeradius-users(a)lists.freeradius.org>; users(a)openser.org > > > > Sent: Friday, September 28, 2007 11:11:23 PM > > > > Subject: Re: [OpenSER-Users] Failed to compile openser with > freeradius > > > > support > > > > > > > > Comment the FREERADIUS=1 in the openser/Makefile > > > > > > > > Make sure that in modules/acc/Makefile ENABLE_RADIUS_ACC=true is not > > > > commented > > > > > > > > Regards, > > > > Norm > > > > > > > > > > > > Live Great wrote: > > > > > HI, > > > > > > > > > > In FreeBSD 6.2, I got this error when I compiled openser with > > > > > freeradius support. > > > > > > > > > > ../../radius.h:36:32: freeradius-client.h: No such file or > directory > > > > > acc.c: In function `init_acc_rad': > > > > > acc.c:464: warning: assignment makes pointer from integer without > > > a cast > > > > > acc.c:475: error: `DICT_ATTR' undeclared (first use in this > > function) > > > > > acc.c:475: error: (Each undeclared identifier is reported only > once > > > > > acc.c:475: error: for each function it appears in.) > > > > > acc.c:475: error: `da' undeclared (first use in this function) > > > > > acc.c:475: error: `DICT_VALUE' undeclared (first use in this > > function) > > > > > acc.c:475: error: `dv' undeclared (first use in this function) > > > > > acc.c: In function `acc_rad_request': > > > > > acc.c:509: error: `VALUE_PAIR' undeclared (first use in this > > function) > > > > > acc.c:514: error: invalid lvalue in assignment > > > > > acc.c:555: error: `OK_RC' undeclared (first use in this function) > > > > > gmake[1]: *** [acc.o] Error 1 > > > > > gmake[1]: Leaving directory > > > > > `/usr/ports/net/openser/work/openser-1.2.2-tls/modules/acc' > > > > > gmake: *** [modules] Error 2 > > > > > *** Error code 2 > > > > > > > > > > Stop in /usr/ports/net/openser. > > > > > *** Error code 1 > > > > > > > > > > Is there any way I can compile openser with freeradius support? > > > > > > > > > > Thanks > > > > > SW > > > > > > > > > ------------------------------------------------------------------------ > > > > > > > > > > ------------------------------------------------------------------------ > > > > > > > > _______________________________________________ > > > > Devel mailing list > > > > Devel(a)openser.org > > > > http://openser.org/cgi-bin/mailman/listinfo/devel > > > > > > > > > > > > > > > > > >

1 0

[OpenSER-Users] serialize_branches seems to be not working
by Marcello Lupo 02 Oct '07

02 Oct '07

Hi to all, i'm using openser 1.2.2 no tls and i use exec_dset to get list of gateways in destination set to be serialized. After execution of exec_dset i get in output: sip:123456@10.10.10.1:5062;q=0.2 sip:123456@10.10.10.10:5060;q=0.1 $ds become : Contact: sip:123456@10.10.10.1:5062;q=0.2, sip:123456@10.10.10.10:5060;q=0.1 RURI become: sip:123456@10.10.10.1:5062;q=0.2 $bR become: sip:123456@10.10.10.10:5060;q=0.1 All seems to be fine but when i run serialize_branches() i get: DEBUG:serialize_branches: nothing to do - all same q! Any ideas on what i'm missing? May be something in the output of exec_dset?? I'm using the \n between lines in my custom LCR scripts to get gateways from DB. Thanks, Bye, Marcello

2 9

[OpenSER-Users] Re: can't get code for the Failed attribute
by Live Great 02 Oct '07

02 Oct '07

Hi, In your example, do you meant openser will trainsform Src-Leg to src_leg and Dst-Leg to dst_leg? After I followed your suggestion and changed the definition to, ATTRIBUTE Src-Leg 1075 string ATTRIBUTE Dst-Leg 1076 string I get an error: ERROR: acc: can't get code for the src_leg attribute I have a feeling that it is case sensitive, and openser is looking for src_leg instead Src-Leg. Thanks Sam. ----- Original Message ---- From: Norman Brandinger <norm(a)goes.com> To: Live Great <livegreat007(a)yahoo.com> Cc: users(a)openser.org Sent: Tuesday, October 2, 2007 9:42:15 PM Subject: Re: can't get code for the Failed attribute Hello Sam, The definition you used: ATTRIBUTE src_leg 0 string Probably isn't valid because "0" is more than likely already being used. Notice that the various ATTRIBUTE numbers are all unique and just increment. So use the next higher number that is available. If the last ATTRIBUTE was 240 then your definition might look like: ATTRIBUTE src_leg 241 string You might also want to consider the general naming convention that is used. The above example would then look as follows: ATTRIBUTE Src-Leg 241 string Note, when you get around to inserting this data into a database, the column name will probably not be allowed to have a dash (unless the column name is quoted). Regards, Norm Live Great wrote: > It looks like it doesn't look up the dictionary files in > /usr/local/share/freeradius/ directory. > But src_leg and dst_leg are not defined in the share directory. > > Sam. > > > ----- Original Message ---- > From: Live Great <livegreat007(a)yahoo.com> > To: Norman Brandinger <norm(a)goes.com> > Cc: users(a)openser.org > Sent: Tuesday, October 2, 2007 10:17:47 AM > Subject: Re: can't get code for the Failed attribute > > Hi Norman, > > Thank you for the reply. > With the definition of "ATTRIBUTE src_leg 0 string", I got an error > "src_leg is not a number". > After changed it to the following definition, > ATTRIBUTE Acct-Status-Type 40 integer > ATTRIBUTE Service-Type 6 integer > ATTRIBUTE Event-Timestamp 55 integer > ATTRIBUTE Acct-Session-Id 44 string > ATTRIBUTE src_leg 1 integer > ATTRIBUTE dst_leg 1 integer > VALUE Acct-Status-Type Start 1 > VALUE Acct-Status-Type Stop 2 > VALUE Acct-Status-Type Failed 0 > VALUE Service-Type Sip-Session 15 > > I still got this error: > ERROR:acc:extra2int: <src_leg> is not a number > > Thanks > Sam > ----- Original Message ---- > From: Norman Brandinger <norm(a)goes.com> > To: Live Great <livegreat007(a)yahoo.com> > Cc: users(a)openser.org > Sent: Tuesday, October 2, 2007 9:43:41 AM > Subject: Re: can't get code for the Failed attribute > > Hi Sam, > > In /usr/local/share/freeradius/dictionary.rfc2866 there exists the > following entry: > > VALUE Acct-Status-Type Failed 15 > > I'm not an expert in this area, but it appears that "Failed" is sort of > predefined. You probably should NOT use "Failed", instead create a > unique attribute such as "failed-reason". This is of course assuming > the rest of your definitions are good. > > Please do not cross-post configuration questions of this type to the > developers mailing list. > > Regards, > Norm > > > Live Great wrote: > > Hi, > > > > After added the following Attributes in the radiusclient-ng/dictionary > > file: > > ATTRIBUTE src_leg 0 string > > ATTRIBUTE dst_leg 0 string > > ATTRIBUTE Failed 0 string > > > > I got the following error: > > ERROR: acc: can't get code for the Failed attribute value > > > > How to define a proper attribute in the dictionary file? > > Thanks > > Sam > > > > ----- Original Message ---- > > From: Norman Brandinger <norm(a)goes.com> > > To: Live Great <livegreat007(a)yahoo.com> > > Cc: devel(a)openser.org > > Sent: Monday, October 1, 2007 9:01:54 PM > > Subject: Re: [OpenSER-Devel] can't get code for the Sip-Response-Code > > attribute > > > > Good Morning, > > > > You need to make sure the dictionary settings are correct and exactly > > match what you have specified in OpenSER. > > > > The dictionaries are specified in radiusclient-ng and in radiusd (and > > mediaproxy if you use it) > > > > The error is telling you that "Sip-Response-Code" cannot be found in any > > of the dictionaries you have specified. > > > > Regards, > > Norm > > > > Live Great wrote: > > > Hi, > > > > > > I still can't this work, that's why I posted in the development forum. > > > > > > I have installed openser with *_ACC=ture uncommented in the > acc/Makfile. > > > But I can't start openser now. > > > Here is the error when I executed /usr/local/etc/rc.d/openser start: > > > > > > core:rc.d # ./openser start > > > Command Monit to start OpenSER... > > > 'openser' start: /usr/local/etc/rc.d/openser > > > 'openser' failed to start > > > Starting Open SIP Router: > > > Listening on > > > udp: 127.0.0.1 [127.0.0.1]:5060 > > > udp: 12x.x.x..x [12x.x.x.x]:5060 > > > Aliases: > > > udp: xxx.xxx..com.au:5060 > > > udp: localhost.xxx.com.au:5060 > > > udp: localhost:5060 > > > > > > In /var/log/messages: > > > ERROR: acc: can't get code for the Sip-Response-Code attribute > > > ERROR:acc:mod_init: failed to init radius > > > > > > core:rc.d # ps -auxww | grep openser > > > root 35219 0.0 0.1 1520 728 p2 R+ 12:03AM 0:00.00 grep > > openser > > > core:rc.d # ps -auxww | grep radius > > > root 35230 0.0 0.3 5004 3256 ?? Ss 12:04AM 0:00.00 > > > /usr/local/sbin/radiusd > > > core:rc.d # ps -auxww | grep mysql > > > mysql 75881 0.0 0.1 1732 1116 p1- I 20Sep07 0:00.02 /bin/sh > > > /usr/local/bin/mysqld_safe > > > --defaults-extra-file=/usr/local/var/db/mysql/my.cnf --user=mysql > > > --datadir=/usr/local/var/db/mysql > > > --pid-file=/usr/local/var/db/mysql/core.xxx.com.au.pid > > > mysql 75924 0.0 2.7 49016 28336 p1- S 20Sep07 10:52.77 [mysqld] > > > root 35237 0.0 0.1 1544 644 p2 RL+ 12:05AM 0:00.00 grep > mysql > > > > > > Why I got thos acc errors when starting openser? > > > > > > Thanks > > > SW > > > > > > > > > > > > ----- Original Message ---- > > > From: Norman Brandinger <norm(a)goes.com> > > > To: Live Great <livegreat007(a)yahoo.com> > > > Cc: FreeRadius users mailing list > > > <freeradius-users(a)lists.freeradius.org>; users(a)openser.org > > > Sent: Friday, September 28, 2007 11:11:23 PM > > > Subject: Re: [OpenSER-Users] Failed to compile openser with freeradius > > > support > > > > > > Comment the FREERADIUS=1 in the openser/Makefile > > > > > > Make sure that in modules/acc/Makefile ENABLE_RADIUS_ACC=true is not > > > commented > > > > > > Regards, > > > Norm > > > > > > > > > Live Great wrote: > > > > HI, > > > > > > > > In FreeBSD 6.2, I got this error when I compiled openser with > > > > freeradius support. > > > > > > > > ../../radius.h:36:32: freeradius-client.h: No such file or directory > > > > acc.c: In function `init_acc_rad': > > > > acc.c:464: warning: assignment makes pointer from integer without > > a cast > > > > acc.c:475: error: `DICT_ATTR' undeclared (first use in this > function) > > > > acc.c:475: error: (Each undeclared identifier is reported only once > > > > acc.c:475: error: for each function it appears in.) > > > > acc.c:475: error: `da' undeclared (first use in this function) > > > > acc.c:475: error: `DICT_VALUE' undeclared (first use in this > function) > > > > acc.c:475: error: `dv' undeclared (first use in this function) > > > > acc.c: In function `acc_rad_request': > > > > acc.c:509: error: `VALUE_PAIR' undeclared (first use in this > function) > > > > acc.c:514: error: invalid lvalue in assignment > > > > acc.c:555: error: `OK_RC' undeclared (first use in this function) > > > > gmake[1]: *** [acc.o] Error 1 > > > > gmake[1]: Leaving directory > > > > `/usr/ports/net/openser/work/openser-1.2.2-tls/modules/acc' > > > > gmake: *** [modules] Error 2 > > > > *** Error code 2 > > > > > > > > Stop in /usr/ports/net/openser. > > > > *** Error code 1 > > > > > > > > Is there any way I can compile openser with freeradius support? > > > > > > > > Thanks > > > > SW > > > > > > ------------------------------------------------------------------------ > > > > > > > ------------------------------------------------------------------------ > > > > > > _______________________________________________ > > > Devel mailing list > > > Devel(a)openser.org > > > http://openser.org/cgi-bin/mailman/listinfo/devel > > > > > > > > > >

2 1

Fw: [OpenSER-Users] Prepaid SIP
by Fredrik Lundmark 02 Oct '07

02 Oct '07

I forgot to cc the list /Fredrik ----- Original Message ----- From: Fredrik Lundmark To: srinivas Antarvedi Sent: Sunday, September 30, 2007 11:34 AM Subject: Re: [OpenSER-Users] Prepaid SIP I believe SEMS (http://ftp.iptel.org/pub/sems/doc/current/AppDocExample.html) together with CDRTool (http://cdrtool.ag-projects.com/) can be adjusted to your needs - any feedback from anyone out there that's done it? BR/// Fredrik ----- Original Message ----- From: srinivas Antarvedi To: users(a)openser.org Sent: Friday, September 28, 2007 12:27 PM Subject: [OpenSER-Users] Prepaid SIP Hello all, Actually i have a testing setup which facilitates to give accounting details to mysql db once call was end by any one of the uac. But if i want to have a prepaid solution like our mobiles i dont found any solution till now on open source some of my friend suggested to go for B2BUA from vovida.org does anybody using this ? is this real that this can work for prepaid stuff? if not just let me know otherwise i will waste my time in doing some research on something not useful if not what might be the other ways to get around the problem of prepaid billing i know we can do this using b2bua, can we go ahead with asterisk? waiting for valuable suggestions -- Srinivas Antarvedi -------------------------------------------------------------------------------- _______________________________________________ Users mailing list Users(a)openser.org http://openser.org/cgi-bin/mailman/listinfo/users

2 1

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users