3 Oct
2007
3 Oct
'07
2:14 a.m.
I just made another attempt by using your suggestion in the openser.cfg file, it started
successfully for a while, that means it has passed the dictionary.
But failed another issue with DIAMETER.
The configuration I used in openser.cfg is:
modparam("acc", "radius_extra", "Src-Leg=$avp(s:source_leg);
Dst-Leg=$avp(s:destination_leg)")
The error is:
acc:init_mytcp(): error connecting to the DIAMETER client
ERROR:acc:child_init:: TCP connection not established
ERROR:init_mod_child: Error while initializing module acc, rank -5
init_unixsock_server: Error in init_child
ERROR: Could not initialize unix domain socket server
In the log, I can see Openser is trying to connect 127.0.0:3000.
Thanks
Sam
----- Original Message ----
From: Live Great <livegreat007(a)yahoo.com>
To: Norman Brandinger <norm(a)goes.com>
Cc: users(a)openser.org
Sent: Wednesday, October 3, 2007 9:34:49 AM
Subject: Re: can't get code for the src-leg attribute
Hi Norman,
Thanks for the reply.
According to your suggestion, I have added the following lines in raddb/dicitionary:
ATTRIBUTE Src-Leg 1075 integer
ATTRIBUTE Dst-Leg 1076 integer
change in radiusclient-ng/dictionary:
ATTRIBUTE Src-Leg 1075 integer
ATTRIBUTE Dst-Leg 1076 integer
change in openser/openser.cfg:
#modparam("acc", "multi_leg_info",
"src_leg=$avp(i:901);dst_leg=$avp(i:902)")
modparam("acc", "multi_leg_info",
"Src-Leg=$avp(i:901);Dst-Leg=$avp(i:902)")
Note, I have commented out the original src_leg/dst_leg definition.
I don't know what is that i:901 and i:902 means, so I simply change the first letter
to upper case and change "_" to "-".
Restarted radiusd, and try to start openser then found the following error in the
/var/log/messages file:
ERROR:acc:extra2int: <Src-Leg> is not a number
When I started radiusd, there are info messages written to /var/log/radiusd.log
file:
Wed Oct 3 09:28:45 2007 : Info: Using deprecated naslist file. Support for this will go
away soon.
Wed Oct 3 09:28:45 2007 : Info: rlm_exec: Wait=yes but no output defined. Did you mean
output=none?
Wed Oct 3 09:28:45 2007 : Info: Ready to process requests.
Thanks
Sam
----- Original Message ----
From: Norman Brandinger <norm(a)goes.com>
To: Live Great <livegreat007(a)yahoo.com>
Cc: users(a)openser.org
Sent: Wednesday, October 3, 2007 3:26:40 AM
Subject: Re: can't get code for the Failed attribute
Hi Sam,
If you altered the dictionary entries, you MUST make sure that your
openser.cfg, has also been updated.
For example:
modparam("acc", "radius_extra", "Src-Leg=$avp(s:source_leg);
Dst-Leg=$avp(s:destination_leg)")
Note that Src-Leg and Dst-Leg
MUST be in the dictionary for BOTH
radiusclient-ng AND radiusd.
Regards,
Norm
Live Great wrote:
<livegreat007(a)yahoo.com>
[12x.x.x.x]:5060
core:rc.d # ps -auxww | grep radius
> > root 35230 0.0 0.3 5004 3256 ?? Ss 12:04AM 0:00.00
> > /usr/local/sbin/radiusd
> > core:rc.d # ps -auxww | grep mysql
> > mysql 75881 0.0 0.1 1732 1116 p1- I 20Sep07 0:00.02 /bin/sh
root 35237 0.0 0.1 1544 644 p2 RL+ 12:05AM 0:00.00 grep
directory
> > > > acc.c: In function `init_acc_rad':
> > > > acc.c:464: warning: assignment makes pointer from integer without
> > a cast
> > > > acc.c:475: error: `DICT_ATTR' undeclared (first use in
this
gmake[1]: Leaving directory
> > > `/usr/ports/net/openser/work/openser-1.2.2-tls/modules/acc'
> > > gmake: *** [modules] Error 2
> > > *** Error code 2
> > >
> > > Stop in /usr/ports/net/openser.
> > > *** Error code 1
> > >
> > > Is there any way I can compile openser with freeradius support?
> > >
> > > Thanks
> > > SW
> > >
> ------------------------------------------------------------------------
> > >
> > >
> ------------------------------------------------------------------------
> > >
> > > _______________________________________________
> > > Devel mailing list
Hi,
In your example, do you meant openser will trainsform Src-Leg to
src_leg and Dst-Leg to dst_leg?
After I followed your suggestion and changed the definition to,
ATTRIBUTE Src-Leg 1075 string
ATTRIBUTE Dst-Leg 1076 string
I get an error:
ERROR: acc: can't get code for the src_leg attribute
I have a feeling that it is case sensitive, and openser is looking for
src_leg instead Src-Leg.
Thanks
Sam.
----- Original Message ----
From: Norman Brandinger <norm(a)goes.com>
To: Live Great <livegreat007(a)yahoo.com>
Cc: users(a)openser.org
Sent: Tuesday, October 2, 2007 9:42:15 PM
Subject: Re: can't get code for the Failed attribute
Hello Sam,
The definition you used:
ATTRIBUTE src_leg 0 string
Probably isn't valid because "0" is more than likely already being
used. Notice that the various ATTRIBUTE numbers are all unique and just
increment. So use the next higher number that is available. If the
last ATTRIBUTE was 240 then your definition might look like:
ATTRIBUTE src_leg 241 string
You might also want to consider the general naming convention that is
used. The above example would then look as follows:
ATTRIBUTE Src-Leg 241 string
Note, when you get around to inserting this data into a database, the
column name will probably not be allowed to have a dash (unless the
column name is quoted)..
Regards,
Norm
Live Great wrote:
> It
looks like it doesn't look up the dictionary files in
> /usr/local/share/freeradius/ directory.
> But src_leg and dst_leg are not defined in the share directory.
>
> Sam.
>
>
> ----- Original Message ----
> From: Live Great <livegreat007(a)yahoo.com>
> To: Norman Brandinger <norm(a)goes.com>
> Cc: users(a)openser.org
> Sent: Tuesday, October 2, 2007 10:17:47 AM
> Subject: Re: can't get code for the Failed attribute
>
> Hi Norman,
>
> Thank you for the reply.
> With the definition of "ATTRIBUTE src_leg 0 string", I got an error
> "src_leg is not a number".
> After changed it to the following definition,
>
ATTRIBUTE Acct-Status-Type 40 integer
> ATTRIBUTE Service-Type 6
integer
> ATTRIBUTE Event-Timestamp 55 integer
> ATTRIBUTE Acct-Session-Id 44 string
> ATTRIBUTE src_leg 1 integer
> ATTRIBUTE dst_leg 1 integer
>
VALUE Acct-Status-Type Start 1
> VALUE Acct-Status-Type Stop
2
> VALUE Acct-Status-Type Failed 0
> VALUE Service-Type
Sip-Session 15
>
> I still got this error:
> ERROR:acc:extra2int: <src_leg> is not a number
>
> Thanks
> Sam
> ----- Original Message ----
> From: Norman Brandinger <norm(a)goes.com>
> To: Live Great <livegreat007(a)yahoo.com>
> Cc: users(a)openser.org
> Sent: Tuesday, October 2, 2007 9:43:41 AM
> Subject: Re: can't get code for the Failed attribute
>
> Hi Sam,
>
> In /usr/local/share/freeradius/dictionary.rfc2866 there exists the
> following entry:
>
> VALUE
Acct-Status-Type Failed 15
I'm not an expert in this area, but it appears that "Failed" is sort of
predefined. You probably should NOT use "Failed", instead create a
unique attribute such as "failed-reason". This is of course assuming
the rest of your definitions are good.
Please do not cross-post configuration questions of this type to the
developers mailing list.
Regards,
Norm
Live Great wrote:
> Hi,
>
> After added the following Attributes in the radiusclient-ng/dictionary
> file:
> ATTRIBUTE src_leg 0 string
> > ATTRIBUTE dst_leg 0 string
> > ATTRIBUTE Failed 0 string
> >
> > I got the following error:
> > ERROR: acc: can't get code for the Failed attribute value
> >
> > How to define a proper attribute in the dictionary file?
> > Thanks
> > Sam
> >
> > ----- Original Message ----
> > From: Norman Brandinger <norm(a)goes.com>
> > To: Live Great > Cc:
devel(a)openser.org
> Sent: Monday, October 1, 2007 9:01:54 PM
> Subject: Re: [OpenSER-Devel] can't get code for the Sip-Response-Code
> attribute
>
> Good Morning,
>
> You need to make sure the dictionary settings are correct and exactly
> match what you have specified in OpenSER.
>
> The dictionaries are specified in radiusclient-ng and in radiusd (and
> mediaproxy if you use it)
>
> The error is telling you that "Sip-Response-Code" cannot be found
in any
> of the dictionaries you have specified.
>
> Regards,
> Norm
>
> Live Great wrote:
> > Hi,
> >
> I still can't this work, that's why
I posted in the development
forum.
> > >
> > > I have installed openser with *_ACC=ture uncommented in the
> acc/Makfile.
> > > But I can't start openser now.
> > > Here is the error when I executed /usr/local/etc/rc.d/openser start:
> > >
> > > core:rc.d # ./openser start
> > > Command Monit to start OpenSER...
> > > 'openser' start: /usr/local/etc/rc.d/openser
> > > 'openser' failed to start
> > > Starting Open SIP Router:
> > > Listening on
> > > udp: 127.0.0.1 [127.0.0.1]:5060
> > > udp: 12x.x.x..x Aliases:
udp: xxx.xxx..com.au:5060
udp: localhost.xxx.com.au:5060
udp: localhost:5060
In /var/log/messages:
ERROR: acc: can't get code for the Sip-Response-Code attribute
ERROR:acc:mod_init: failed to init radius
core:rc.d # ps -auxww | grep openser
root 35219 0.0 0.1 1520 728 p2 R+ 12:03AM 0:00.00 grep
openser > > /usr/local/bin/mysqld_safe
> > --defaults-extra-file=/usr/local/var/db/mysql/my.cnf --user=mysql
> > --datadir=/usr/local/var/db/mysql
> > --pid-file=/usr/local/var/db/mysql/core.xxx.com.au.pid
> > mysql 75924 0.0 2.7 49016 28336 p1- S 20Sep07 10:52.77
[mysqld]
> > > mysql
> >
> > Why I got thos acc errors when starting openser?
> >
> > Thanks
> > SW
> >
> >
> >
> > ----- Original Message ----
> > From: Norman Brandinger <norm(a)goes.com>
> > To: Live Great <livegreat007(a)yahoo.com>
> > Cc: FreeRadius users mailing list
> > <freeradius-users(a)lists.freeradius.org>rg>; users(a)openser.org
> > Sent: Friday, September 28, 2007 11:11:23 PM
> > Subject: Re: [OpenSER-Users] Failed to compile openser with
freeradius
>
support
> > Comment the FREERADIUS=1 in the openser/Makefile
> >
> > Make sure that in modules/acc/Makefile ENABLE_RADIUS_ACC=true is not
> > commented
> >
> > Regards,
> > Norm
> >
> >
> > Live Great wrote:
> > > HI,
> > >
> > > In FreeBSD 6.2, I got this error when I compiled openser with
> > > freeradius support.
> > >
> > > ../../radius.h:36:32: freeradius-client.h: No such file or function)
> > > acc.c:475: error: (Each undeclared identifier is reported only
once
> >
acc.c:475: error: for each function it appears in.)
> > acc.c:475: error: `da' undeclared (first use in this function)
> > acc.c:475: error: `DICT_VALUE' undeclared (first use in this
function)
> > acc.c:475: error: `dv' undeclared
(first use in this function)
> > acc.c: In function `acc_rad_request':
> > acc.c:509: error: `VALUE_PAIR' undeclared (first use in this
function)
>
acc.c:514: error: invalid lvalue in assignment
> acc.c:555: error: `OK_RC' undeclared (first use in this function)
> gmake[1]: *** [acc.o] Error 1
Devel(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/devel
6073
days inactive
6073
days old
0 comments
1 participants
participants (1)
-
Live Great