- sr-users - kamailio.org

Need useful graphics ideas
by Karsten Horsmann 16 Mar '18

16 Mar '18

Hello List, I thought about some kind of Kamailio stats source (like registered users, calls active and some other things) to collect them into influx dB and draw them with grafana. How do you solved that? Timer based routes or statsd or whatever? Kind regards Karsten Horsmann

5 10

Lua script reload
by Igor Olhovskiy 16 Mar '18

16 Mar '18

Hi! I’m playing with new KEMI framework and trying to reload script without reloading Kamailio. Lua code is mostly one from example. ... modparam("app_lua", "load", "/etc/kamailio/lua/kamailio.lua") cfgengine "lua" ... So, I’m changing lua code and giving command kamctl rpc app_lua.reload But in the answer { "jsonrpc": "2.0", "error": { "code": -32000, "message": "Execution Error" }, "id": 11098 } In syslog there is a string /usr/sbin/kamailio[10939]: ERROR: app_lua [app_lua_api.c:399]: lua_sr_reload_script(): reload is not activated What is need to be done to activate reload? Regards, Igor

2 12

logging sip messages
by Karthik Srinivasan 15 Mar '18

15 Mar '18

Hello: I am trying to find a simple way to log each and every SIP message that Kamailio receives or Kamailio sends. In a nutshell, here is what i'm trying to accomplish: - log sip message received; log ip address and port of where message was received from - log sip message to be sent or sent; log ip address and port of destination. I am trying to achieve this in the context of my general log file that contains routing/event logic from the kamailio.cfg file. By this i mean i don't want to have to run an external program like tcpdump to capture the packets and log them. I have tried a few thing but haven't been able to capture all conditions. examples: i have included things like event_routes for [tm:local-response]; [sl:local-response]; [sl:filtered-ack], onreply_route... I can capture most replies and responses via those but am not able to capture a 200ok relayed response from Kamailio back to the originating UA for example. I can log incoming messages without problem. I have also tried to activate IO interrupt to route to event_route[NETWORK:MSG] but unfortunately i can't access the source/dest ip address/port info or other pseudo variables. So back to the original question: How does one log every SIP message that Kamailio gets? How does one log every SIP message that Kamailio sends? via the context of the routing/replies/event routes in kamailio.cfg. Thanks, Karthik

3 3

UAC Restore Mode
by Duarte Rocha 15 Mar '18

15 Mar '18

Greetings, I have a question about the UAC module and its restore mode. If i use the "auto" restore mode in the "restore_mode" parameter will the entire info be saved in the From Tag for restore? I'm asking because i will implement High Avaliability and need to know if in event of a failure and i switch to a kamailio in a different machine i will be able to do the To\From restore. Thanks in advance, Duarte Rocha

1 0

Kamailio Edge Proxy & Kamailio Core Sip Server behind NAT
by Ed 14 Mar '18

14 Mar '18

Hi all, I would like to thank you all for the work you are doing. Having a Kamailio Edge proxy (2 interfaces - 1 pvt, 1 public) & Kamailio Core Sip server behind NAT, is it necessary to set up rtpengine on both servers? Thanks, Ed

2 1

kamailio implamentation
by kossivi HOLONOU 14 Mar '18

14 Mar '18

Hello, I am developing a project on MSRP Kamailio with webRTC client for my end of training project, can you help me with documentation or configuration side kamailio and webRTC client to implement to get there? Thank you for your support BesT Regards,Kossivi HolonouBO VAS EngineerDakar-Sénégal

1 0

Dimensioning ds_hash_size value for dispatcher module
by Alvaro Araos 14 Mar '18

14 Mar '18

Hi, In the documentation of the dispatcher module it is said that in order to use the algorithm 10 (load balancing) the parameter ds_hash_size must be set, in the definition it is said that the value is in powers of 2, that is to say if it is set to 8, this is equal to 2 ^ 8 = 256 slots, but still I do not understand how to dimension this value for my needs. I do not know whether to put 8, 4, 9, etc. Saludos, ALVARO ARAOS MÉNDEZ Director de Tecnología en FONOIP +56 2 2947 9000 alvaro(a)fonoip.com | www.fonoip.com [1] Moisés Chacón 46, El Monte, RM Links: ------ [1] http://www.fonoip.com

2 2

Kamailio With SMPP
by Amar Tinawi 14 Mar '18

14 Mar '18

Hello Is there a method to integrate kamailio to an smpp smsc ? Thanks

2 1

kamailio Rx_AAR qusetions
by Lv, Victor (NSB - CN/Qingdao) 14 Mar '18

14 Mar '18

Hi All, I am trying to send two Rx_AAR after Kamailio receive 200 OK with SDP: The first one for termination part is worked well, but in MT_aar_reply route block, it's not works. The one I marked with red color, is there anyone know how configure Kamailio to send two Rx_AAR after receive 200 OK SDP? Thanks a lot!! Victor +++++++++++++++++++++++++++++++++++++++++++++++++++++++ if (t_check_status("200")){ xlog("L_DBG", "IMS: Received 200 nside orig_initial_reply\n"); $var(aarret) = Rx_AAR("MT_aar_reply", "term","",2); xlog("L_DBG", "AAR return code is $var(aarret)\n"); } on MT_aar_reply block: route[MT_aar_reply] { #this is async so to know status we have to check the reply avp switch ($avp(s:aar_return_code)) { case 1: xlog("L_DBG", "Diameter: Term AAR success on media authorization\n"); break; default: xlog("L_ERR", "IMS: AAR failed Term\n"); xlog("L_ERR", "IMS: ttag: "+ "$avp(TTAG_CUSTOM_AVP)"); xlog("L_ERR", "IMS: ftag: "+ "$avp(FTAG_CUSTOM_AVP)"); xlog("L_ERR", "IMS: callid: "+ "$avp(CALLID_CUSTOM_AVP)"); #comment this if you want to allow even if Rx fails if(dlg_get("$avp(CALLID_CUSTOM_AVP)","$avp(FTAG_CUSTOM_AVP)","$avp(TTAG_CUSTOM_AVP)")){ dlg_terminate("all", "Sorry no QoS available"); exit; } $var(aarret) = Rx_AAR("MO_aar_reply", "term","",2); xlog("L_DBG", "AAR return code is $var(aarret)\n");

4 8

kamailio does not start with db_mongdb and usrloc
by Stephane Focant 13 Mar '18

13 Mar '18

Hello, I have an issue when I try to use kamailio 5.1 with usrloc and db_mongdb modules. When I try to start kamailio, I get the following error: 0(22216) DEBUG: <core> [db.c:314]: db_do_init2(): connection 0x7f735b5c4100 not found in pool 0(22216) DEBUG: db_mongodb [mongodb_connection.c:55]: db_mongodb_new_connection(): connection open to: mongodb://10.0.12.149 ,10.0.12.150, 10.0.12.151/kamailio?replicaSet=sre_location&slaveOk=true&readPreference=primaryPreferred 0(22216) DEBUG: db_mongodb [mongodb_dbase.c:864]: db_mongodb_query(): query to collection [version] 0(22216) DEBUG: db_mongodb [mongodb_dbase.c:898]: db_mongodb_query(): query filter: { "table_name" : "location" } 0(22216) DEBUG: db_mongodb [mongodb_dbase.c:917]: db_mongodb_query(): columns filter: { "table_version" : 1 } 0(22216) DEBUG: <core> [db_res.c:120]: db_new_result(): allocate 56 bytes for result set at 0x7f735b5c4450 0(22216) DEBUG: db_mongodb [mongodb_dbase.c:746]: db_mongodb_store_result(): no result from mongodb 0(22216) DEBUG: <core> [db.c:404]: db_table_version(): no row for table location found 0(22216) ERROR: <core> [db.c:450]: db_check_table_version(): invalid version 0 for table location found, expected 9 (check table structure and table "version") 0(22216) ERROR: usrloc [dlist.c:659]: register_udomain(): error during table version check. 0(22216) DEBUG: <core> [db_pool.c:100]: pool_remove(): removing connection from the pool 0(22216) ERROR: registrar [registrar.c:651]: domain_fixup(): failed to register domain 0(22216) ERROR: <core> [core/route.c:1154]: fix_actions(): fixing failed (code=-1) at cfg:/usr/local/kamailio-5.1/etc/kamailio/kamailio.cfg:660 0(22216) ERROR: <core> [core/rvalue.c:3860]: fix_rval_expr(): failure in cfg at line: 660 col: 22 0(22216) ERROR: <core> [core/rvalue.c:3860]: fix_rval_expr(): failure in cfg at line: 660 col: 22 0(22216) ERROR: <core> [core/route.c:1154]: fix_actions(): fixing failed (code=-1) at cfg:/usr/local/kamailio-5.1/etc/kamailio/kamailio.cfg:663 ERROR: error -1 while trying to fix configuration 0(22216) DEBUG: tm [t_funcs.c:85]: tm_shutdown(): start 0(22216) DEBUG: tm [t_funcs.c:88]: tm_shutdown(): emptying hash table 0(22216) DEBUG: tm [t_funcs.c:90]: tm_shutdown(): removing semaphores 0(22216) DEBUG: tm [t_funcs.c:92]: tm_shutdown(): destroying tmcb lists 0(22216) DEBUG: tm [t_funcs.c:95]: tm_shutdown(): done 0(22216) INFO: <core> [core/sctp_core.c:53]: sctp_core_destroy(): SCTP API not initialized 0(22216) DEBUG: <core> [core/mem/shm.c:261]: shm_destroy_manager(): destroying memory manager: q_malloc 0(22216) DEBUG: <core> [core/mem/q_malloc.c:1165]: qm_shm_lock_destroy(): destroying the shared memory lock 0(22216) DEBUG: <core> [core/mem/pkg.c:91]: pkg_destroy_manager(): destroying memory manager: q_malloc In mongoDB, I have the collection "version" in the db kamailio, and the entries needed for usrloc (location and location_attrs): sre_location:PRIMARY> use kamailio switched to db kamailio sre_location:PRIMARY> db.getCollection("version").find() { "_id" : ObjectId("5a8ec43c601b262bef82a595"), "table_name" : "location", "table_version" : 9 } { "_id" : ObjectId("5a8edb72a3ec40427577b8d0"), "table_name" : "location_attrs", "table_version" : 1 } And logs in mongo show the following info when kamailio starts: 2018-02-22T17:13:02.604+0100 I NETWORK [conn90] received client metadata from 10.0.12.180:56320 conn: { driver: { name: "mongoc", version: "1.9.2" }, os: { type: "Linux", name: "CentOS", version: "6.9 (Final)", architecture: "x86_64" }, platform: "cfg=0x1563000 posix=200809 CC=GCC 4.4.7 20120313 (Red Hat 4.4.7-18) CFLAGS="" LDFLAGS=""" } 2018-02-22T17:13:02.604+0100 I COMMAND [conn90] command admin.$cmd command: isMaster { isMaster: 1, client: { driver: { name: "mongoc", version: "1.9.2" }, os: { type: "Linux", name: "CentOS", version: "6.9 (Final)", architecture: "x86_64" }, platform: "cfg=0x1563000 posix=200809 CC=GCC 4.4.7 20120313 (Red Hat 4.4.7-18) CFLAGS="" LDFLAGS=""" }, compression: [], $readPreference: { mode: "secondaryPreferred" }, $db: "admin" } numYields:0 reslen:716 locks:{} protocol:op_query 0ms 2018-02-22T17:13:02.604+0100 I COMMAND [conn90] command kamailio.$cmd command: find { find: "version", filter: { table_name: "location" }, table_version: 1, $db: "kamailio", $readPreference: { mode: "primaryPreferred" }, $clusterTime: { clusterTime: Timestamp(1519315979, 1), signature: { hash: BinData(0, 0000000000000000000000000000000000000000), keyId: 0 } } } numYields:0 reslen:531 locks:{} protocol:op_msg 0ms 2018-02-22T17:13:02.605+0100 I NETWORK [conn90] end connection 10.0.12.180:56320 (9 connections now open) I probably miss something: it is not clear to me why kamailio is not able to retrieve the value of table_version for the table_name location. Any idea would be very welcome ! I use mongo-c-driver 1.9.2 and mongodb 3.6 Thank you. Stephane

3 14

permissions.allow in conjunction with trusted table
by Ben Hood 12 Mar '18

12 Mar '18

Hi, I'd like to trust HTTP requests from internal subnets and use the trusted table to manage permissions from external networks. Is there a way to configure permissions.allow to trust everything on a local subnet and use the DB table for everything else? Does the permissions module even work in that way (i.e. to use two sources of trust)? If so, what is the permissions.allow syntax to trust a CIDR? Or is it better to split the trust up based on listening ports (i.e. define the route blocks so that requests to the port listening for internal traffic is not subject to the trusted table)? I guess I could also add the trusted internal subnet to the trusted table, but this would be mixing application level stuff with devops stuff. TIA, Ben

2 2

Tracking NAT Helper keepalives
by Mark Boyce 12 Mar '18

12 Mar '18

Hi All Is there any way to extract round trip lime state from keepalives? I have a customer who’d like to duplicate the qualify feature of Asterisk. ie latency / distance of endpoint from server. Can’t see any way to hook in from the docs. Thanks Mark

2 1

SBC rejects SIP INVITE from Kamailio+topos
by José Lopes 12 Mar '18

12 Mar '18

Hello, I am using Kamailio working as edge proxy with topos module active. Kamailio is proxing requests from Freeswitch's to the SBC Metaswitch. The Freeswitch sends SIP REGISTER requests and it is ok (Contact: < sip:1003@172.29.210.164:5070>). When Freeswitch sends SIP INVITE quest, it receives a reply with Forbiden (Contact: <sip:btpsh-5aa0219a-2a32-2@172.29.210.164:5070>). You can check the sip trace at https://pastebin.com/raw/JZUNgYx5 I analysed this issue on SBC Metaswitch and it requires that the INVITE and REGISTER have the same Contact Header. I know that this is not required from SIP RFC, but that it is SBC default security policy. There is any way to configure Kamailio using topos to have the same Contact Header on INVITE and REGISTER? Best regards, José Lopes

2 1

Dialog Terminator
by Leonardo Assunção 12 Mar '18

12 Mar '18

Greetings, Does Kamailio has a method or variable that indicates who cancelled,rejected or terminated a call and, therefore ended the dialog? Currently i'm looking for the sources of BYE's, CANCEL and replies greater than 300 to first INVITE, but i would safer if such a method existed. Thanks in advance

2 1

Presence not notifying?
by Mark Boyce 11 Mar '18

11 Mar '18

Hi All Got a presence problem with what should be a very simple config. Would much appreciate someone having a look at the following and seeing if I’ve missed something obvious :-) Thanks Mark I’ve gone right back to basics and using the example at http://kb.asipto.com/kamailio:presence:k43-blf <http://kb.asipto.com/kamailio:presence:k43-blf> Changes to that example are; - Kamailio 5.1.2 - RTPEngine - NAT Enabled - JSON RPC replacing mi_rpc - HA1 Passwords Setup is; Three phone 20,21,22 all on site behind a NAT (10.1.3.x local IP) at 1.2.3.4 External IP. Phone 21 has BLF Subscriptions on 20 and 22 Domain is set as “mykamailio.com” Kamailio is an Ubuntu server “In the cloud” on 5.6.7.8 (Assuming I have got my domain & ip rewrites correct on the cut’n’paste) What’s Happening; All three phones register 21 Issues SUBSCRIBE:Dialog for 20 and 22. Which get 202 Accepted back after a 407 Proxy Auth SUBSCRIBE sip:22@mykamailio.com:5060 SIP/2.0 Via: SIP/2.0/UDP 10.1.3.84:5065;rport;branch=z9hG4bK3894730624 From: "21@SBC-2" <sip:21@mykamailio.com>;tag=1678729960 To: <sip:22@mykamailio.com> Call-ID: 1544456221(a)10.1.3.84 CSeq: 1 SUBSCRIBE Contact: <sip:21@10.1.3.84:5065> Accept: application/dialog-info+xml Max-Forwards: 70 User-Agent: Yealink SIP-T26P 6.73.0.50 Expires: 1800 Event: dialog Content-Length: 0 I can see these arrive in active_watchers table; *************************** 2. row *************************** id: 2 presentity_uri: sip:20@mykamailio.com watcher_username: 21 watcher_domain: mykamailio.com to_user: 20 to_domain: mykamailio.com event: dialog event_id: to_tag: a6c744f901d779619c580c9ef48ab5e9-2651 from_tag: 1809677495 callid: 2674059037(a)10.1.3.84 local_cseq: 0 remote_cseq: 2 contact: sip:21@10.1.3.84:5065;alias=1.2.3.4~5065~1 record_route: expires: 1520711354 status: 1 reason: version: 0 socket_info: udp:5.6.7.8:5060 local_contact: sip:5.6.7.8:5060 from_user: 21 from_domain: mykamailio.com updated: -1 updated_winfo: -1 flags: 0 user_agent: Yealink SIP-T26P 6.73.0.50 If I make a call from 20 to 22 it works as expected but no notify is sent. For completeness the changes I’ve made to the kamailio.cfg file are; # diff kamailio.cfg_presence_example kamailio.cfg 6a7 > #!define WITH_NAT 119c120 < #!define DBURL "mysql://kamailio:kamailiorw@localhost/kamailio" --- > #!define DBURL "mysql://kamailiorw:password@localhost/test_kamailio" 169a171 > alias="mykamailio.com" 221c223 < mpath="/usr/local/lib/kamailio/modules/" --- > mpath="/usr/lib/x86_64-linux-gnu/kamailio/modules/" 228c230 < loadmodule "mi_fifo.so" --- > loadmodule "jsonrpcs.so" 245d246 < loadmodule "mi_rpc.so" 279c280 < loadmodule "rtpproxy.so" --- > loadmodule "rtpengine.so" 304,307d304 < # ----- mi_fifo params ----- < modparam("mi_fifo", "fifo_name", "/tmp/kamailio_fifo") < < 375,376c372,374 < modparam("auth_db", "calculate_ha1", yes) < modparam("auth_db", "password_column", "password") --- > modparam("auth_db", "calculate_ha1", no) > modparam("auth_db", "password_column", "ha1") > modparam("auth_db", "password_column_2", "ha1b") 414c412 < modparam("presence", "server_address", "sip:192.168.178.54:5060" ) --- > modparam("presence", "server_address”, "sip:5.6.7.8:5060") 454c452 < modparam("rtpproxy", "rtpproxy_sock", "udp:127.0.0.1:7722") --- > modparam("rtpengine", "rtpengine_sock", "udp:127.0.0.1:2223") 835c833 < rtpproxy_manage("co"); --- > rtpengine_manage("co”);

2 5

Re: [SR-Users] From URI == Myself
by Fred Posner 09 Mar '18

09 Mar '18

If you're not listening or identifying that IP and specific port as an alias, then yes, this is expected. One reason why would be to run another program on that port. Fred Posner direct: +1 (224) 334-FRED (3733) > On Mar 9, 2018, at 6:52 AM, Nicolas Breuer <Nicolas.Breuer(a)belcenter.biz> wrote: > > --_000_VI1PR0402MB359898CF4C2CDFCD4EBA5DA189DE0VI1PR0402MB3598_ > Content-Type: text/plain; charset="us-ascii" > Content-Transfer-Encoding: quoted-printable > > Hello the List, > > I saw a strange behavior on the last Kamailio v4. > > The Kamailio is binding on port 5060. > > If (from_uri=3D=3Dmyself){ > ...... > } > > > * When the From uri in the INVITE is <xxxx@myalias:5070> > * When the myalias is an alias > No issue the IF routine is executed. > * When the myalias is the ip address of the server > The IF Routine is = > NOT executed because there is a mismatch in the port (5060 >< 5070) > > > Is it the expected behavior ? > > Thanks > > > > > > > --_000_VI1PR0402MB359898CF4C2CDFCD4EBA5DA189DE0VI1PR0402MB3598_ > Content-Type: text/html; charset="us-ascii" > Con

1 0

From URI == Myself
by Nicolas Breuer 09 Mar '18

09 Mar '18

Hello the List, I saw a strange behavior on the last Kamailio v4. The Kamailio is binding on port 5060. If (from_uri==myself){ ...... } * When the From uri in the INVITE is <xxxx@myalias:5070> * When the myalias is an alias > No issue the IF routine is executed. * When the myalias is the ip address of the server > The IF Routine is NOT executed because there is a mismatch in the port (5060 >< 5070) Is it the expected behavior ? Thanks

1 0

ways to track all messages of a dialog
by Fabian Borot 09 Mar '18

09 Mar '18

I need to track all messages (SIP Requests, SIP Responses) for some SIP dialogs. Let's say I need to log something specific on each state for calls initiated from a certain IP (initial request, temporary replies, rejection with a negative response, call was accepted with 200, termination with BYE, termination with CANCEL etc. ). I am thinking on using flags but I am not sure after reading the tutorial on flags (http://www.kamailio.org/dokuwiki/doku.php/tutorials:openser-flag-operations) if that is going to work properly. The doc says: "They provide a very easy and fast way of keeping states during processing a request or during a transaction". I am afraid that the ACK if the call is accepted and the BYE won't be tracked properly because they are not part of the initial transaction. Also the doc does not mention if the flag is preserved among branches spawned during the processing of the call. The idea is for example: request_route { if (is_method("INVITE")){ if ($si == "192.168.168.100"){ #condition that would set the flag, INVITE came from "my_IP" #flag/mark dialog setflag(1); #log call from "my_IP" was received } route("INCOMING); } If(loose_route() ){ if (is_method("ACK")){ if(isflagset(1)){ #log ACK related to "my_IP" was received } } if (is_method("CANCEL")){ if(isflagset(1)){ #log CANCEL related to "my_IP" was received } } if (is_method("BYE")){ if(isflagset(1)){ #log BYE related to "my_IP" was received } } } } Then : route["INCOMING"] { # do some processing # do some processing t_onreply("INCOMING"); t_on_failure("INCOMING"); t_relay(); } onreply_route[INCOMING] { #do some processing if(isflagset(1)){ #log a reply related to "my_IP" was received } } failure_route[INCOMING] { #do some processing if(isflagset(1)){ #log a negative reply related to "my_IP" was received } } Will the flags work on this case ? My 2nd approach is to use a htable and use the call_id for my calls as the key. The on each route section (reply, failure_reply, ACK processing etc.) find the $ci on the htable and if it is there do the appropriate action. But I need to delete the key:value once the call ends or leave it autoexpire with a expire value bigger than the max_call_duration_time that we have in our system.

3 6

sql_pvquery free result
by Ben Hood 09 Mar '18

09 Mar '18

Hi, Does sql_pvquery() clean up after itself? The other query APIs return a result handle that you clean up with sql_result_free(), but sql_pvquery() doesn’t appear to return any handle, so is it self-collecting? Cheers, Ben

2 2

Why does all the examples on configuring Kamailio install PostgreSQL
by Wilkins, Steve 09 Mar '18

09 Mar '18

Hello All, I have noticed that almost all, if not all examples of installing Kamailio install the PostgreSQL libraries. If one is using MySQL, is there a need for this? Is there something in Kamailio that requires these PostgreSQL libraries to be installed? Thank you

4 3

Resend Authenticate REGISTER to two or more Asterisk PBX
by Social Boh 08 Mar '18

08 Mar '18

Hello, I'd like know which is the best way to resend a Authenticate REGISTER to two or more Asterisk. Repeating rewritehostport and forward commands for the number of Asterisk Servers, there is a problem with the Via Header; Kamailio add one with his IP for each forward. I try to remove the first Via before send the REGISTER to the second Asterisk without success. Any hint or tip? Thank you Regards -- --- I'm SoCIaL, MayBe

2 2

how to check if pseudo-variable contains a String
by Laurent Schweizer 08 Mar '18

08 Mar '18

Dear all, I have a question regarding pseudo-variable, how can I check if a pseudo-variable contains a specific string ? Like to check if $ct contains "transport=tcp". Thanks BR Laurent

1 0

Info: Meeting during FOSSASIA 2018
by Daniel-Constantin Mierla 08 Mar '18

08 Mar '18

Hello, soon I am going to travel to Singapore for FOSSASIA 2018 conference (March 22-25 - https://2018.fossasia.org/), giving a talk about Kamailio. Given that it is rather rare I travel to south-east Asia, I wonder if there are other people from Kamailio community attending FOSASSIA or happen to be in the city during the event. Maybe we can plan something like a small group meetup to greet, have a drink or so and chat about the project and real time communications. Write me if you can join such a meetup. It would be great to meet some kamailians around there! Cheers, Daniel -- Daniel-Constantin Mierla www.twitter.com/miconda -- www.linkedin.com/in/miconda Kamailio Advanced Training - April 16-18, 2018, Berlin - www.asipto.com Kamailio World Conference - May 14-16, 2018 - www.kamailioworld.com

1 0

Kamailio Memory Settings
by Duarte Rocha 08 Mar '18

08 Mar '18

Hey. I have some questions about memory settings. I can see the default values with "kamailio -I" and change the current values with "kamailio -M 12 -m 128". How do i see the active settings and how do i change the default value? I want to setup a proxy capable to handle 150CPS, 6k active calls, with Dispatcher, Database, Number Normalizations and other operations. What are good settings for CPU, RAM Memory, PKG_SIZE and SHM_SIZE? Thanks for the help, Best Regards, Duarte Rocha

2 1

Failed auth
by Aidar Kamalov 08 Mar '18

08 Mar '18

Hello! I have kamailio 5.0.5 and some cisco spa 50x phones. Sometime phone can't register to kamailio. REGISTER packets with right nonce,reponse, etc gets to kamailio but it response 401 Unauthorized with code -3 (user not found). After some attempts(or time, phone send register every 1200 seconds) or after reboot phone it register succesfully Feb 13 11:20:02 sipchel /usr/sbin/kamailio[110432]: NOTICE: <script>: AUTH: REGISTER [a470211a-b7d8faa5(a)172.16.3.1] Feb 13 11:20:02 sipchel /usr/sbin/kamailio[110432]: NOTICE: <script>: AUTH: REGISTER FAILED (code: -5) fd=voip.xxxx.org, adu=<null>, aa=<null>, ar=<null>, au=<null>, ad=<null>, aU=<null>, Au=33855(a)voip.xxxx.org [ a470211a-b7d8faa5(a)172.16.3.1] Feb 13 11:20:02 sipchel /usr/sbin/kamailio[110433]: NOTICE: <script>: AUTH: REGISTER [a470211a-b7d8faa5(a)172.16.3.1] Feb 13 11:20:02 sipchel /usr/sbin/kamailio[110433]: NOTICE: <script>: AUTH: REGISTER FAILED (code: -3) fd=voip.xxxx.org, adu=sip:voip.xxxx.org, aa=MD5, ar=voip.xxxx.org, au=33855, ad=, aU=33855, Au=33855(a)voip.xxxx.org [ a470211a-b7d8faa5(a)172.16.3.1] Feb 13 11:20:02 sipchel /usr/sbin/kamailio[110431]: NOTICE: <script>: AUTH: REGISTER [a470211a-b7d8faa5(a)172.16.3.1] Feb 13 11:20:02 sipchel /usr/sbin/kamailio[110431]: NOTICE: <script>: AUTH: REGISTER FAILED (code: -3) fd=voip.xxxx.org, adu=sip:voip.xxxx.org, aa=MD5, ar=voip.xxxx.org, au=33855, ad=, aU=33855, Au=33855(a)voip.xxxx.org [ a470211a-b7d8faa5(a)172.16.3.1] -- Aydar A. Kamalov

2 1

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users