- sr-users - kamailio.org

[Serusers] Radius Authentification
by Frederic Turbelin 19 Mar '03

19 Mar '03

Hi, I tested auth_radius module with freeradius and it works perfecly But now i would like test it with Microsoft IAS. Is it possible ? Even if i had Attribute in Dictionary I have this error on IAS Event : A malformed request was received from client Sip. The data is the packet. Thank you for your help Yours faith fully

2 1

[Serusers] push to call button...
by lgfausak＠august.net 19 Mar '03

19 Mar '03

I know I can do this, but I can't figure out how. How can I put a button on my web site that says 'call me'. Given two SIP accounts, assuming they are registered, can I connect the two??? ---greg

3 3

[Serusers] ser crash
by Michael Haberler 19 Mar '03

19 Mar '03

is there an obvious reason while this packet segfaults ser? -Michael U 192.246.69.223:5060 -> 131.130.250.70:5060 INVITE sip:+436644213465@sip.nic.at:5060 SIP/2.0..Via: SIP/2.0/UDP 192.246.69.223:5060;branch=af698415c60f0a785d206 251979279f5.2..Via: SIP/2.0/UDP 81.223.16.198:8483..From: "19343"<sip:19343@192.246.69.223:5060>;tag=a7b8d18d-28d7- 4906-af7e-c6d107b0d9ce..To: <sip:1010011436644213465@192.246.69.223:5060>..Call-ID: 8d6f2c6c-3d22-41d5-a56a-7c4a396 8cb40@81.223.16.198..CSeq: 1 INVITE..Proxy-Authorization: Basic VovidaClassXSwitch..Record-Route: <sip:101001143664 4213465@192.246.69.223:5060;maddr=192.246.69.223>..Contact: <sip:81.223.16.198:8483>..User-Agent: Windows RTC/1.0.. Content-Type: application/sdp..Content-Length: 451....v=0..o=mah9 0 0 IN IP4 81.223.16.198..s=session..c=IN IP4 81. 223.16.198..b=CT:1000..t=0 0..m=audio 55350 RTP/AVP 97 111 112 6 0 8 4 5 3 101..a=rtpmap:97 red/8000..a=rtpmap:111 SIREN/16000..a=fmtp:111 bitrate=16000..a=rtpmap:112 G7221/16000..a=fmtp:112 bitrate=24000..a=rtpmap:6 DVI4/16000..a =rtpmap:0 PCMU/8000..a=rtpmap:8 PCMA/8000..a=rtpmap:4 G723/8000..a=rtpmap:5 DVI4/8000..a=rtpmap:3 GSM/8000..a=rtpma p:101 telephone-event/8000..a=fmtp:101 0-16.. .... 0(2517) ERROR: do_action: set*: uri too long Segmentation fault

2 1

[Serusers] ��
by 235840＠dtccom.net 19 Mar '03

19 Mar '03

1 0

[Serusers] Presence Agent
by Ricardo Villa 18 Mar '03

18 Mar '03

Hi, I downloaded the latest CVS snapshot in order to test the PA module. Unfortunately when I start up SER I get this error: 0(19596) ERROR: load_module: could not open module </opt/bin/ser/lib/ser/modules/pa.so>: /opt/bin/ser/lib/ser/modules/pa.so: undefined symbol: default_expires Any idea what could be happening here. The entire output is: 0(19596) loading module /opt/bin/ser/lib/ser/modules/sl.so 0(19596) loading module /opt/bin/ser/lib/ser/modules/tm.so 0(19596) loading module /opt/bin/ser/lib/ser/modules/rr.so 0(19596) loading module /opt/bin/ser/lib/ser/modules/maxfwd.so 0(19596) loading module /opt/bin/ser/lib/ser/modules/usrloc.so 0(19596) loading module /opt/bin/ser/lib/ser/modules/registrar.so 0(19596) loading module /opt/bin/ser/lib/ser/modules/jabber.so 0(19596) loading module /opt/bin/ser/lib/ser/modules/pa.so 0(19596) ERROR: load_module: could not open module </opt/bin/ser/lib/ser/modules/pa.so>: /opt/bin/ser/lib/ser/modules/pa.so: undefined symbol: default_expires 0(19596) parse error (38,13-48): failed to load module 0(19596) find_param_export: found <db_mode> in module usrloc [/opt/bin/ser/lib/ser/modules/usrloc.so] 0(19596) find_export: found <mf_process_maxfwd_header> in module maxfwd_module [/opt/bin/ser/lib/ser/modules/maxfwd.so] 0(19596) find_export: found <sl_send_reply> in module sl_module [/opt/bin/ser/lib/ser/modules/sl.so] 0(19596) find_export: found <sl_send_reply> in module sl_module [/opt/bin/ser/lib/ser/modules/sl.so] 0(19596) find_export: found <save> in module registrar [/opt/bin/ser/lib/ser/modules/registrar.so] 0(19596) find_export: found <lookup> in module registrar [/opt/bin/ser/lib/ser/modules/registrar.so] 0(19596) find_export: found <sl_send_reply> in module sl_module [/opt/bin/ser/lib/ser/modules/sl.so] 0(19596) find_export: found <t_relay> in module tm [/opt/bin/ser/lib/ser/modules/tm.so] 0(19596) find_export: found <sl_reply_error> in module sl_module [/opt/bin/ser/lib/ser/modules/sl.so] ERROR: bad config file (1 errors) 0(19596) INFO: signal 15 received 0(19596) Memory status (pkg): 0(19596) qm_status (0x809e800): 0(19596) heap size= 1022872 0(19596) used= 0, used+overhead=25704, free=997168 0(19596) max used (+overhead)= 25704 0(19596) dumping all allocked. fragments: 0(19596) dumping free list stats : 0(19596) hash= 521. fragments no.: 1 0(19596) ----------------------------- Thanks, Ricardo

2 2

[Serusers] Re: hello
by Sebastien Pierre 18 Mar '03

18 Mar '03

On Fri, 14 Mar 2003 17:22:14 -0500 "Bo" <boman122(a)yahoo.com> wrote: > Hi Sebastien, > > I saw your post on SER mialing list regarding the SER logging and the mighty HelloWorld.cfg. Actually I met the same problem with yours. Whatever configuration options I changed, the only thing I could see in the /var/log/messages are as follows. > > Mar 14 17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF is initially 65535 > Mar 14 17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF is finally 262142 > Mar 14 17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF is initially 65535 > Mar 14 17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF is finally 262142 > Mar 14 17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF is initially 65535 > Mar 14 17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF is finally 262142 > Mar 14 17:56:49 dda ser[15316]: INFO: fifo process starting: 15316 > Mar 14 17:56:49 dda ser[15316]: SER: open_uac_fifo: fifo server up at /tmp/ser_fifo... > > Did you solve your problem finally? If yes, can you give me some hints? Yes! I simply start ser in mono-process mode, with `ser -E -f HelloWorld.cfg'. -- Sebastien

2 1

[Serusers] call forward on no answer
by Daniel Sullivan 18 Mar '03

18 Mar '03

Hello friends, Is it possible for SER to forward a call to another phone if the recipient does not answer? Thanks, Dan

4 4

[Serusers] Small bug in latest CVS snaphot: ul_mod.c
by srm＠cs.stir.ac.uk 18 Mar '03

18 Mar '03

Hi, I just got the latest snapshot from CVS, it all compiles fine but ser produces submit_query errors in the log. In particular it comments that field "user" is not found. It seems to work after I changed char* user_col = "user" in modules/usrloc/ul_mod.c to char* user_col = "username"; Stephan -- The University of Stirling is a university established in Scotland by charter at Stirling, FK9 4LA. Privileged/Confidential Information may be contained in this message. If you are not the addressee indicated in this message (or responsible for delivery of the message to such person), you may not disclose, copy or deliver this message to anyone and any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. In such case, you should destroy this message and kindly notify the sender by reply email. Please advise immediately if you or your employer do not consent to Internet email for messages of this kind. Opinions, conclusions and other information in this message that do not relate to the official business of the University of Stirling shall be understood as neither given nor endorsed by it.

2 1

[Serusers] Another software UA for Testing
by Erik Lagerway 18 Mar '03

18 Mar '03

XPhone is another SIP UA soft client [Windows PC and PocketPC/CE] that works well with SER. The Beta version is free and you can download it here: http://xphone.xten.net Cheers, Erik Lagerway

2 1

[Serusers] 503 service unavailable
by Bo 18 Mar '03

18 Mar '03

I am doing some tests between Cisco ATA186 and AS5300 by using SER as the proxy server. AS5300 sent back 503 (service unavailable). Anyone has any clue on this? Thanks

1 1

[Serusers] stun client/server
by jh＠lohi.eng.song.fi 18 Mar '03

18 Mar '03

we got from somewhere Alan Hawrylyshen's stun client/server implementation version 0.8.2, but doesn't appear to implement the latest stun draft draft-ietf-midcom-stun-05.txt, but some earlier version. does anyone know if there exists an open source stun client/server that would conform to the latest stun draft? -- juha

3 4

[Serusers] Elena_M sent you a Yahoo! Greeting
by replymsg＠greetings.yahoo.com 17 Mar '03

17 Mar '03

1 0

[Serusers] bug in tm module - 503 Service Unavailable
by Tirpák Miklós 17 Mar '03

17 Mar '03

Hi, I think there is a bug in the tm module of he CVS tree: timer.c line 283: if (SEND_BUFFER( r_buf )<=0) { SEND_BUFFER returns -1 on error, and 0 on success, so it should be if (SEND_BUFFER( r_buf )==-1) { SER always sends "503 Service Unavailable" respond after sending INVITE retransmissions in our test environment. Modifying timer.c solved this problem. I can attach my syslog or udp-log if necessary. -- --------------------------------------------------------------------------- Miklos Tirpak Computer and Automation Research Institute e-mail : mtirpak(a)sztaki.hu of the Hungarian Academy of Sciences phone : (361) 279-6011 H-1132. Budapest, Victor Hugo u 18-22 fax : (361) 279-6021

3 5

[Serusers] (no subject)
by Christoph 17 Mar '03

17 Mar '03

Hello! I am interested in the presence support that ser offers. Are there any documents for this topic or something else available? My interest in that topic grounds in the needs of information for the diploma thesis I am currently writing. Best Regards Christoph -- +++ GMX - Mail, Messaging & more http://www.gmx.net +++ Bitte lächeln! Fotogalerie online mit GMX ohne eigene Homepage!

3 2

[Serusers] �� 30�.�. �� 15�.�.��
by constellation＠tconl.com 17 Mar '03

17 Mar '03

1 0

[Serusers] Registration - 401 Unauthorized
by Anton Yurchenko 17 Mar '03

17 Mar '03

Hello, I`ve downloaded todays cvs and installed is, now, I am trying to register my SIP phone ( Snom 100 ), with it and authorize it. The phone sends a REGISTER and the ser sends it a 401 Unauthorized. ----------- 0.000000 172.20.0.199 -> 172.20.0.50 SIP Request: SUBSCRIBE sip:phila@phila.dg 0.002626 172.20.0.50 -> 172.20.0.199 SIP Status: 404 Not Found 0.038876 172.20.0.199 -> 172.20.0.50 SIP Request: REGISTER sip:phila.dg 0.042129 172.20.0.50 -> 172.20.0.199 SIP Status: 401 Unauthorized ------------- I`ve added the user to the mysql database and, am using the configuration included in the example ser.cfg ( I`ve uncommented the 4 lines). --------------------------- # Uncomment this if you want to use digest authentication if (!www_authorize("dg", "subscriber")) { www_challenge("dg", "0"); break; }; --------------------------- it seems that the www_challenge sends this message. How to fix this? And what is the SUBSCRIBE request? Thanks a lot, -- Anton Yurchenko<phila(a)dg.net.ua> Digital Generation

3 6

[Serusers] �� Trium Eclipse �� 129$
by constellation＠tconl.com 17 Mar '03

17 Mar '03

1 0

[Serusers] Asterisk as PSTN gateway
by Michael Haberler 16 Mar '03

16 Mar '03

did anybody try to use Asterisk (www.asterisk.org) as an PSTN gateway? Any experiences, <good or bad? -Michael

1 0

[Serusers] jabber? microsoft messenger
by lgfausak＠august.net 16 Mar '03

16 Mar '03

I've been testing a bunch of soft clients out and Microsoft Messenger seems to work very well. It has the notion of contacts that are online. I guess this is what the Jabber modules is for, right? Right now, for me to start a phone call with Messenger it is weird, I have to: 1) click on 'Start a Voice Conversation' 2) click on the 'Other' tab when the new window pops up. 3) Enter a long email address '4695461235(a)augustvoice.net' in the prompted box. ... Then my phone call starts. It would be much better if I could just pick from my list of contacts. Is the jabber configuration and deployment pretty easy? Does it play well with non-jabber clients? By the way, we have about 20 beta users registering with SER routing calls to and from the PSTN. It is working very well. ---greg Greg Fausak

2 1

[Serusers] Cisco 2600 SIP dial peers
by Emil 16 Mar '03

16 Mar '03

Hi all, Just a question before I embark on my next SER venture. I now have a couple of Cisco 7960 phones sitting behind fw's and using transverse NAT and SER auth (The Auth working thanks to JAN) @ different homes. All these homes are connected to the internet via ADSL and use DDNS, my SER server sits on the Internet and have a fixed IP and DNS entry. This config works really well. The next step is to add a Cisco 2600 router to the config and hook 4 FXO ports up to our PABX @ work. I only want authenticated users on SER to be able to forward requests to the router, I can tell the router only to accept connections that originated on the SER server. Is this possible on SER. Kind regards, Emil

2 2

Re: [Serusers] SER log
by Bo 16 Mar '03

16 Mar '03

OOh, you are absolutely right. I forgot to put the quote marks on the domain name! Thanks ----- Original Message ----- From: Emil To: Bo Sent: Sunday, March 16, 2003 10:15 AM Subject: Re: [Serusers] SER log Hi Bo, Try this uri=~"xxx.com" or usr=~"xxx\.com Let me know. s E ----- Original Message ----- From: Bo To: Emil Sent: Sunday, March 16, 2003 5:10 PM Subject: Re: [Serusers] SER log Hi Emil, I re-installed the ser-0.8.10-2.i386.rpm on Redhat 8.0. This time with the default /usr/local/etc/ser.cfg, SER could start without any problem. But when I just changed 'if (uri==mydomain)' to 'if(uri==xxx.com)', it showed 'ERROR: bad config file (11 errors)'. Is there anything wrong? Thanks Bo ----- Original Message ----- From: Emil To: Bo Sent: Saturday, March 15, 2003 1:32 AM Subject: Re: [Serusers] SER log Hi Bo, Am running it on RedHat 8.0 and installed it from the rpm, no problem. E ----- Original Message ----- From: Bo To: serusers(a)lists.iptel.org Sent: Saturday, March 15, 2003 1:44 AM Subject: Re: [Serusers] SER log Thanks Emil. Yes, after I comment the PSTN gateway part, it worked. Lots of error messages came out during the bootup of the server. I doubt there must be something wrong with the re-compilation. I tried the precomiled version (rpm package) on Redhat linux 8.0 first. But the server couldn't bootup (it showed 'Terminated' when booting). Has anyone ever compiled SER on Redhat 8.0? Regards Bo ----- Original Message ----- From: Emil To: Bo Sent: Friday, March 14, 2003 6:23 PM Subject: Re: [Serusers] SER log Hi Bo, Just change the if uri== back to myself for testing. Have you tried the precompiled version? When I start the service (service ser start) on no fork and debug 9 the service should look like it is hanging, oops and change log_stderror=no to yes. Tail /var/log/message again and let me know. E ----- Original Message ----- From: Bo To: serusers(a)lists.iptel.org Sent: Saturday, March 15, 2003 1:14 AM Subject: Re: [Serusers] SER log Hi Emil, Thanks for your infor. I tried and it still didn't work. Now I doubt if the /etc/ser/ser.cfg (see the following) takes effect or not. I changed the settings and if I ran the server by command ' # ser ', no problem. But if I ran it like ' # ser -f ser.cfg ', then it told me ERROR: bad config file (11 errors) Actually I didn't change too much on the default ser.cfg. Pls indicate. _________________________________________________________________________________ # # $Id: ser.cfg,v 1.12 2002/10/21 02:40:06 jiri Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=9 # debug level (cmd line: -dddddddddd) fork=no log_stderror=no # (cmd line: -E) check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database #loadmodule "//usr/lib/ser/modules/mysql.so" loadmodule "//usr/lib/ser/modules/sl.so" loadmodule "//usr/lib/ser/modules/tm.so" loadmodule "//usr/lib/ser/modules/rr.so" loadmodule "//usr/lib/ser/modules/maxfwd.so" loadmodule "//usr/lib/ser/modules/usrloc.so" loadmodule "//usr/lib/ser/modules/registrar.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! #loadmodule "//usr/lib/ser/modules/auth.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line #modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # #modparam("auth", "secret", "alsdkhglaksdhfkloiwr") #modparam("auth", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth", "password_column", "password") # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwars==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (len_gt( max_len )) { sl_send_reply("513", "Message too big"); break; }; # Do strict routing if pre-loaded route headers present rewriteFromRoute(); # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==sip.mycompany.com) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication # if (!www_authorize("iptel.org", "subscriber")) { # www_challenge("iptel.org", "0"); # break; # }; save("location"); break; }; # attempt handoff to PSTN if (uri=~"^sip:[0-9]*@sip.mycompany.com") { log(4, "Forwarding to PSTN\n"); forward(X.X.X.X,5060); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now if (!t_relay()) { sl_reply_error(); }; } _____________________________________________________________________________ ----- Original Message ----- From: Emil To: Bo Sent: Friday, March 14, 2003 5:43 PM Subject: Re: [Serusers] SER log Hi Bo, Jan just helped me with a similar problem. Debug level = 9 and fork t= no. Tail /var/log messages and you will get plenty of info. Emil ----- Original Message ----- From: Bo To: serusers(a)lists.iptel.org Sent: Saturday, March 15, 2003 12:35 AM Subject: [Serusers] SER log Hi, Does anyone have any clue on the following problem? I recompiled and installed SER in Redhat Linux 8.0. Unfortunately I tried all the possible options (debug level) in the ser.cfg, but the only messages I could see in the /var/log/messsages are as follows. Mar 14 17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF is initially 65535 Mar 14 17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF is finally 262142 Mar 14 17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF is initially 65535 Mar 14 17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF is finally 262142 Mar 14 17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF is initially 65535 Mar 14 17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF is finally 262142 Mar 14 17:56:49 dda ser[15316]: INFO: fifo process starting: 15316 Mar 14 17:56:49 dda ser[15316]: SER: open_uac_fifo: fifo server up at /tmp/ser_fifo... What should I do to see the detailed debugs? Thanks, Bo

2 1

Re: Re: [Serusers] SER log
by Bo 16 Mar '03

16 Mar '03

Hi Mathi, Thanks for your suggestion. I re-installed the ser-0.8.10-2.i386.rpm on Redhat 8.0. This time with the default /usr/local/etc/ser/ser.cfg (lib is under /usr/local/lib/ser/modules), SER could start without any problem. But when I just changed 'if (uri==mydomain)' to 'if(uri==xxx.com)', it showed 'ERROR: bad config file (11 errors)'. Is there anything wrong? Regards ----- Original Message ----- From: "sipdev" <sipdev(a)xten.com> To: "Bo" <boman122(a)yahoo.com> Cc: "mark(a)xten.com" <erik(a)xten.com> Sent: Saturday, March 15, 2003 10:55 AM Subject: RE: Re: [Serusers] SER log > Hi Bo, > we compiled the SER(8.10 linuxi386 ) in redhat linux 8.0. > we placed the ser folder in desktop and tried to run that. > It gave errors when i.e unable to find ser.cfg.Then we copied the ser.cfg and the lib folder to the home directory i.e > /usr/local.... > > Now ser is working fine. > please try this. > > Regards, > Mathi > > > > Original Message ----------------------- > Thanks Emil. > > Yes, after I comment the PSTN gateway part, it worked. Lots of error messages came out during the bootup of the server. I doubt there must be something wrong with the re-compilation. > > I tried the precomiled version (rpm package) on Redhat linux 8.0 first. But the server couldn't bootup (it showed 'Terminated' when booting). Has anyone ever compiled SER on Redhat 8.0? > > Regards > Bo > ----- Original Message ----- > From: Emil > To: Bo > Sent: Friday, March 14, 2003 6:23 PM > Subject: Re: [Serusers] SER log > > > Hi Bo, > > Just change the if uri== back to myself for testing. > > Have you tried the precompiled version? > > When I start the service (service ser start) on no fork and debug 9 the service should look like it is hanging, oops and change log_stderror=no to yes. > > Tail /var/log/message again and let me know. > > E > ----- Original Message ----- > From: Bo > To: serusers(a)lists.iptel.org > Sent: Saturday, March 15, 2003 1:14 AM > Subject: Re: [Serusers] SER log > > > Hi Emil, > > Thanks for your infor. > > I tried and it still didn't work. Now I doubt if the /etc/ser/ser.cfg (see the following) takes effect or not. I changed the settings and if I ran the server by command ' # ser ', no problem. But if I ran it like ' # ser -f ser.cfg ', then it told me > ERROR: bad config file (11 errors) > Actually I didn't change too much on the default ser.cfg. > > Pls indicate. > ____________________________________________________________________________ _____ > # > # $Id: ser.cfg,v 1.12 2002/10/21 02:40:06 jiri Exp $ > # > # simple quick-start config script > # > > # ----------- global configuration parameters ------------------------ > > debug=9 # debug level (cmd line: -dddddddddd) > fork=no > log_stderror=no # (cmd line: -E) > check_via=no # (cmd. line: -v) > dns=no # (cmd. line: -r) > rev_dns=no # (cmd. line: -R) > port=5060 > children=4 > fifo="/tmp/ser_fifo" > > # ------------------ module loading ---------------------------------- > > # Uncomment this if you want to use SQL database > #loadmodule "//usr/lib/ser/modules/mysql.so" > > loadmodule "//usr/lib/ser/modules/sl.so" > loadmodule "//usr/lib/ser/modules/tm.so" > loadmodule "//usr/lib/ser/modules/rr.so" > loadmodule "//usr/lib/ser/modules/maxfwd.so" > loadmodule "//usr/lib/ser/modules/usrloc.so" > loadmodule "//usr/lib/ser/modules/registrar.so" > > # Uncomment this if you want digest authentication > # mysql.so must be loaded ! > #loadmodule "//usr/lib/ser/modules/auth.so" > > # ----------------- setting module-specific parameters --------------- > > # -- usrloc params -- > > modparam("usrloc", "db_mode", 0) > > # Uncomment this if you want to use SQL database > # for persistent storage and comment the previous line > #modparam("usrloc", "db_mode", 2) > > # -- auth params -- > # Uncomment if you are using auth module > # > #modparam("auth", "secret", "alsdkhglaksdhfkloiwr") > #modparam("auth", "calculate_ha1", yes) > # > # If you set "calculate_ha1" parameter to yes (which true in this config), > # uncomment also the following parameter) > # > #modparam("auth", "password_column", "password") > > # ------------------------- request routing logic ------------------- > > # main routing logic > > route{ > > # initial sanity checks -- messages with > # max_forwars==0, or excessively long requests > if (!mf_process_maxfwd_header("10")) { > sl_send_reply("483","Too Many Hops"); > break; > }; > if (len_gt( max_len )) { > sl_send_reply("513", "Message too big"); > break; > }; > > # Do strict routing if pre-loaded route headers present > rewriteFromRoute(); > > # if the request is for other domain use UsrLoc > # (in case, it does not work, use the following command > # with proper names and addresses in it) > if (uri==sip.mycompany.com) { > > if (method=="REGISTER") { > > # Uncomment this if you want to use digest authentication > # if (!www_authorize("iptel.org", "subscriber")) { > # www_challenge("iptel.org", "0"); > # break; > # }; > > save("location"); > break; > }; > > # attempt handoff to PSTN > if (uri=~"^sip:[0-9]*@sip.mycompany.com") { > log(4, "Forwarding to PSTN\n"); > forward(X.X.X.X,5060); > break; > }; > > # native SIP destinations are handled using our USRLOC DB > if (!lookup("location")) { > sl_send_reply("404", "Not Found"); > break; > }; > }; > # forward to current uri now > if (!t_relay()) { > sl_reply_error(); > }; > > } > ____________________________________________________________________________ _ > > ----- Original Message ----- > From: Emil > To: Bo > Sent: Friday, March 14, 2003 5:43 PM > Subject: Re: [Serusers] SER log > > > Hi Bo, > > Jan just helped me with a similar problem. > > Debug level = 9 and fork t= no. > > Tail /var/log messages and you will get plenty of info. > > Emil > ----- Original Message ----- > From: Bo > To: serusers(a)lists.iptel.org > Sent: Saturday, March 15, 2003 12:35 AM > Subject: [Serusers] SER log > > > Hi, > > Does anyone have any clue on the following problem? > > I recompiled and installed SER in Redhat Linux 8.0. Unfortunately I tried all the possible options (debug level) in the ser.cfg, but the only messages I could see in the /var/log/messsages are as follows. > > Mar 14 17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF is initially 65535 > Mar 14 17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF is finally 262142 > Mar 14 17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF is initially 65535 > Mar 14 17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF is finally 262142 > Mar 14 17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF is initially 65535 > Mar 14 17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF is finally 262142 > Mar 14 17:56:49 dda ser[15316]: INFO: fifo process starting: 15316 > Mar 14 17:56:49 dda ser[15316]: SER: open_uac_fifo: fifo server up at /tmp/ser_fifo... > > What should I do to see the detailed debugs? > > Thanks, > > Bo

2 1

[Serusers] IETF
by Jiri Kuthan 15 Mar '03

15 Mar '03

Friends, I'll be in the upcoming IETF meeting from tommorrow to Friday. If there is any need to talk to me at higher bandwidth, just let me know -- I will do my best to allocate time for you. -Jiri -- Jiri Kuthan http://iptel.org/~jiri/

1 0

Re: [Serusers] SER log
by Bo 15 Mar '03

15 Mar '03

Thanks Emil. Yes, after I comment the PSTN gateway part, it worked. Lots of error messages came out during the bootup of the server. I doubt there must be something wrong with the re-compilation. I tried the precomiled version (rpm package) on Redhat linux 8.0 first. But the server couldn't bootup (it showed 'Terminated' when booting). Has anyone ever compiled SER on Redhat 8.0? Regards Bo ----- Original Message ----- From: Emil To: Bo Sent: Friday, March 14, 2003 6:23 PM Subject: Re: [Serusers] SER log Hi Bo, Just change the if uri== back to myself for testing. Have you tried the precompiled version? When I start the service (service ser start) on no fork and debug 9 the service should look like it is hanging, oops and change log_stderror=no to yes. Tail /var/log/message again and let me know. E ----- Original Message ----- From: Bo To: serusers(a)lists.iptel.org Sent: Saturday, March 15, 2003 1:14 AM Subject: Re: [Serusers] SER log Hi Emil, Thanks for your infor. I tried and it still didn't work. Now I doubt if the /etc/ser/ser.cfg (see the following) takes effect or not. I changed the settings and if I ran the server by command ' # ser ', no problem. But if I ran it like ' # ser -f ser.cfg ', then it told me ERROR: bad config file (11 errors) Actually I didn't change too much on the default ser.cfg. Pls indicate. _________________________________________________________________________________ # # $Id: ser.cfg,v 1.12 2002/10/21 02:40:06 jiri Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=9 # debug level (cmd line: -dddddddddd) fork=no log_stderror=no # (cmd line: -E) check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database #loadmodule "//usr/lib/ser/modules/mysql.so" loadmodule "//usr/lib/ser/modules/sl.so" loadmodule "//usr/lib/ser/modules/tm.so" loadmodule "//usr/lib/ser/modules/rr.so" loadmodule "//usr/lib/ser/modules/maxfwd.so" loadmodule "//usr/lib/ser/modules/usrloc.so" loadmodule "//usr/lib/ser/modules/registrar.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! #loadmodule "//usr/lib/ser/modules/auth.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line #modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # #modparam("auth", "secret", "alsdkhglaksdhfkloiwr") #modparam("auth", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth", "password_column", "password") # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwars==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (len_gt( max_len )) { sl_send_reply("513", "Message too big"); break; }; # Do strict routing if pre-loaded route headers present rewriteFromRoute(); # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==sip.mycompany.com) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication # if (!www_authorize("iptel.org", "subscriber")) { # www_challenge("iptel.org", "0"); # break; # }; save("location"); break; }; # attempt handoff to PSTN if (uri=~"^sip:[0-9]*@sip.mycompany.com") { log(4, "Forwarding to PSTN\n"); forward(X.X.X.X,5060); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now if (!t_relay()) { sl_reply_error(); }; } _____________________________________________________________________________ ----- Original Message ----- From: Emil To: Bo Sent: Friday, March 14, 2003 5:43 PM Subject: Re: [Serusers] SER log Hi Bo, Jan just helped me with a similar problem. Debug level = 9 and fork t= no. Tail /var/log messages and you will get plenty of info. Emil ----- Original Message ----- From: Bo To: serusers(a)lists.iptel.org Sent: Saturday, March 15, 2003 12:35 AM Subject: [Serusers] SER log Hi, Does anyone have any clue on the following problem? I recompiled and installed SER in Redhat Linux 8.0. Unfortunately I tried all the possible options (debug level) in the ser.cfg, but the only messages I could see in the /var/log/messsages are as follows. Mar 14 17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF is initially 65535 Mar 14 17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF is finally 262142 Mar 14 17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF is initially 65535 Mar 14 17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF is finally 262142 Mar 14 17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF is initially 65535 Mar 14 17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF is finally 262142 Mar 14 17:56:49 dda ser[15316]: INFO: fifo process starting: 15316 Mar 14 17:56:49 dda ser[15316]: SER: open_uac_fifo: fifo server up at /tmp/ser_fifo... What should I do to see the detailed debugs? Thanks, Bo

2 1

Re: [Serusers] SER log
by Bo 14 Mar '03

14 Mar '03

Hi Emil, Thanks for your infor. I tried and it still didn't work. Now I doubt if the /etc/ser/ser.cfg (see the following) takes effect or not. I changed the settings and if I ran the server by command ' # ser ', no problem. But if I ran it like ' # ser -f ser.cfg ', then it told me ERROR: bad config file (11 errors) Actually I didn't change too much on the default ser.cfg. Pls indicate. _________________________________________________________________________________ # # $Id: ser.cfg,v 1.12 2002/10/21 02:40:06 jiri Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=9 # debug level (cmd line: -dddddddddd) fork=no log_stderror=no # (cmd line: -E) check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database #loadmodule "//usr/lib/ser/modules/mysql.so" loadmodule "//usr/lib/ser/modules/sl.so" loadmodule "//usr/lib/ser/modules/tm.so" loadmodule "//usr/lib/ser/modules/rr.so" loadmodule "//usr/lib/ser/modules/maxfwd.so" loadmodule "//usr/lib/ser/modules/usrloc.so" loadmodule "//usr/lib/ser/modules/registrar.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! #loadmodule "//usr/lib/ser/modules/auth.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line #modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # #modparam("auth", "secret", "alsdkhglaksdhfkloiwr") #modparam("auth", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth", "password_column", "password") # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwars==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (len_gt( max_len )) { sl_send_reply("513", "Message too big"); break; }; # Do strict routing if pre-loaded route headers present rewriteFromRoute(); # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==sip.mycompany.com) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication # if (!www_authorize("iptel.org", "subscriber")) { # www_challenge("iptel.org", "0"); # break; # }; save("location"); break; }; # attempt handoff to PSTN if (uri=~"^sip:[0-9]*@sip.mycompany.com") { log(4, "Forwarding to PSTN\n"); forward(X.X.X.X,5060); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now if (!t_relay()) { sl_reply_error(); }; } _____________________________________________________________________________ ----- Original Message ----- From: Emil To: Bo Sent: Friday, March 14, 2003 5:43 PM Subject: Re: [Serusers] SER log Hi Bo, Jan just helped me with a similar problem. Debug level = 9 and fork t= no. Tail /var/log messages and you will get plenty of info. Emil ----- Original Message ----- From: Bo To: serusers(a)lists.iptel.org Sent: Saturday, March 15, 2003 12:35 AM Subject: [Serusers] SER log Hi, Does anyone have any clue on the following problem? I recompiled and installed SER in Redhat Linux 8.0. Unfortunately I tried all the possible options (debug level) in the ser.cfg, but the only messages I could see in the /var/log/messsages are as follows. Mar 14 17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF is initially 65535 Mar 14 17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF is finally 262142 Mar 14 17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF is initially 65535 Mar 14 17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF is finally 262142 Mar 14 17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF is initially 65535 Mar 14 17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF is finally 262142 Mar 14 17:56:49 dda ser[15316]: INFO: fifo process starting: 15316 Mar 14 17:56:49 dda ser[15316]: SER: open_uac_fifo: fifo server up at /tmp/ser_fifo... What should I do to see the detailed debugs? Thanks, Bo

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users