- sr-users - kamailio.org

AAR change subscription ID
by eyas barhouk 03 Jun '19

03 Jun '19

dear community, when i'm trying to deploy kamailio IMS with PCRF i get ims-qos AAR error due to Subscription id. in ims_qos module i found that i can change the subscription_id type and value as following: * subscription_id to hard code subscription ID for AAR. Used for some broken PCRFs. Leave blank to use default * subscription_id_type to hard code subscription ID type for AAR. Only applicable if subscription_id is set. Set to -1 to use default. This is as per RFC 4006: END_USER_E164 0, END_USER_IMSI 1, END_USER_SIP_URI 2, END_USER_NAI 3, END_USER_PRIVATE 4 but when i changed it there was no change on AAR Subscription-id AVP. any advise about how to set or change the subscription id dears ?? B.R Eyas

1 0

Releasing a new version for Siremis
by Daniel-Constantin Mierla 03 Jun '19

03 Jun '19

Hello, after quite a bit of time, we are considering to release a new version for Siremis - the web management interface for Kamailio. A lot of effort has been pushed to address the issues with PHPv7.x, which deprecated a lot of PHPv5.x API as well as made more strict rules in regards to classes and inheritances. At this stage it should be in good stage, but it would help if others can give it a ride to Siremis master branch: * https://github.com/asipto/siremis Installation guidelines: * https://kb.asipto.com/siremis:install51x:main Testing with both PHP v5 and v7 is appreciated in order to be sure things were not broken for old systems. Any issue found should be reported on github project issue tracker. If all goes fine, in soon we will make the release. Cheers, Daniel -- Daniel-Constantin Mierla -- www.asipto.com www.twitter.com/miconda -- www.linkedin.com/in/miconda

1 0

invalid payload location
by Kelvin Chua 31 May '19

31 May '19

is there a plan to create an sdp sanity functionality? ERROR: <core> [core/parser/sdp/sdp.c:212]: set_sdp_payload_attr(): Invalid payload location opensips has something similar sipmsg_validate() *'s'* - checks the integrity of the SDP body, if it exists Kelvin Chua

2 2

Table creation error when enabling ims_usrloc_scscf module.
by Ali Shirvani 30 May '19

30 May '19

Hi all, I installed kamailio v5.2.3 from source and IMS modules included. Then I tried to create required database and tables, I removed "dialog" from STANDARD_MODULES and added "ims_dialog ims_charging ims_usrloc_scscf ims_usrloc_pcscf presence" to the EXTRA_MODULES in kamctlrc file. When I issue `<kamailio_home>/sbin/kamctl create` I got following error: ERROR 1062 (23000) at line 39: Duplicate entry 'subscriber' for key 'table_name_idx' ERROR: Creating extra tables failed at ims_usrloc_scscf! Should I exclude an other module from STANDARD_MODUELS? Regards, Ali

2 1

turn on DEBUG level debugging for ICSCF module
by Trinh, Jenny 30 May '19

30 May '19

Hi, How do I turn on DEBUG level debugging for ICSCF module? Thanks Jenny

2 1

app_java.so: undefined symbol: JNI_CreateJavaVM please help
by Renato Gallo 30 May '19

30 May '19

gcj is not a requirement since 2018 [ https://www.codesd.com/item/undefined-symbol-jni-createjavavm-on-linux.html | https://www.codesd.com/item/undefined-symbol-jni-createjavavm-on-linux.html ] all details are in the bug ticket at the link: [ https://github.com/kamailio/kamailio/issues/1969 | https://github.com/kamailio/kamailio/issues/1969 ] please help Renato Gallo System Engineer sede legale e operativa: Via Privata Cefalonia, 14 - 20156 - Milano (MI) Tel. +39 02 - 87049490 Fax +39 02 - 48677349 Mobile. +39 342 - 6350524 Wi | FreeNumbers: https://freenumbers.way-interactive.com Wi | SMS: https://sms.way-interactive.com Wi | Voip: https://voip.way-interactive.com Asterweb: http://www.asterweb.org Le informazioni contenute in questo messaggio e negli eventuali allegati sono riservate e per uso esclusivo del destinatario. Persone diverse dallo stesso non possono copiare o distribuire il messaggio a terzi. Chiunque riceva questo messaggio per errore è pregato di distruggerlo e di informare immediatamente [ mailto:info@sigmaware.it | info@ ] asterweb.org

1 0

Fwd: Stack smash error when using auth_ephemeral with KEMI
by Grant Bagdasarian 30 May '19

30 May '19

Hi Daniel, See pastebin url below for the backtrace. https://pastebin.com/tTUUk4YH Hopefully I did it the right way. Please let me know if you need anything else. FYI, Kamailio is running inside of a docker container. version: kamailio 5.2.1 (x86_64/linux) flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144 MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: unknown compiled with gcc 6.3.0 I can easily replicate this, but to be sure I've saved the core file locally on my machine. Regards, Grant On Thu, May 2, 2019 at 10:05 AM Daniel-Constantin Mierla <miconda(a)gmail.com> wrote: > > Hello, > > can you get a core file for this case? > > Set `ulimit -c unlimited` before starting Kamailio as root and run again. > > Once you have the core file, get the backtrace with gdb. > > Cheers, > Daniel > > On 01.05.19 20:26, Grant Bagdasarian wrote: > > Hello, > > > > I was trying out the auth_ephemeral module inside the xhttp > > event_route in Python KEMI, and discovered a possible bug. > > > > https://pastebin.com/4Ghumfis > > > > The following will result in the stack smash error. Whenever I leave > > out the unixtimestamp the > > module will complain about not being able to convert to an int, which > > make sense, but doesn't lead to a stack smash error and a complete > > crash of Kamailio. > > > > KSR.auth_ephemeral.autheph_authenticate("1576734089:grant", "1234"). > > > > According to the documentation this module can only be used in > > REQUEST_ROUTE, but I found a presentation online which also used this > > module and that particular function in event_route, which is what I > > need for WebSocket authentication. > > > > Hope this helps. Please let me know if you need more information. > > > > Regards, > > > > Grant > > > > _______________________________________________ > > Kamailio (SER) - Users Mailing List > > sr-users(a)lists.kamailio.org > > https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users > > -- > Daniel-Constantin Mierla -- www.asipto.com > www.twitter.com/miconda -- www.linkedin.com/in/miconda > Kamailio World Conference - May 6-8, 2019 -- www.kamailioworld.com >

2 10

Kamailio Load Balancing
by Gaurav Bmotra 30 May '19

30 May '19

HI i am using kamailio 5.1.2 With Ubuntu 18.04.2 LTS and using Freeswitch as Media server and kamailio as Register server i wan to implement load balance on this plz help thank you Gaurav -- *Regards:* Gaurav Kumar

3 7

usrloc extra attributes and db_mode=0
by Patrick Wakano 29 May '19

29 May '19

Hello list, Hope you all doing well! I am trying to use the extra attributes (xavp_contact) of the usrloc module to save some additional info about the user. I am setting the value before the save() and doing a call to registered() (not lookup()) before trying to access these extra attributes. This works fine with db_mode=3 but does not work in case of db_mode=0. Does anyone knows if it should also work with mode 0? I was expecting it to work but a call to kamcmd ul.dump show nothing related..... I don't want to use the DB for the location purposes because I prefer to have multiple servers using the dmq_usrloc (that works like a charm!) and it conflicts with DB persistence of the location table (when the DMQ replication happens, all servers (sharing the same DB) try to save the same user info in the location table) Thank you, Kind regards, Patrick Wakano

2 6

Statistics help
by Duarte Rocha 29 May '19

29 May '19

Greetings, I'm doing some monitoring of my Kamailio in order to quickly identify system failures and overloads. In order to do that i have scripts that read the output of "kamcmd sl.stats" and identify the rising of "500_replies", "5xx_replies" and "6xx_replies". However, i have rate limiting on my Kamailio, which generates "503" replies when limit is reached, which generates an unnecessary alarm. Is there a way to get more specific stats about the repleis generated by Kamailio? If that isn't possible, will i be safe only monitoring "500" and "6xx" replies? In my experience, when the server has reached a processing or memory limit, the reply is always 500, but i'm not really sure about this. Thank you for your help. Best Regards, Duarte Rocha

2 1

Push proxy and load balancer for asterisk?
by Gerrit Jacobsen 29 May '19

29 May '19

Good morning, I want to realise a push notification proxy to signal incoming calls from asterisk to softphones. Is Kamailio the preferred solution for this? I looked also at Flexisip and Asterisk scripts and was told by a seasoned professional that Kamailio is the preferable solution as its scalable. True? I would be glad if someone could share his experiences. Also can one Kamailio instance be used as an asterisk load balancer and also push notification proxy ? I have been a heavy openser user a long time ago. I used first openser as my core routing engine but then switched to yate. Please excuse my rather broad questions. From my experience with Openser the devil is in the detail. So any hints on where this setup may cause problems would be great. Thanks a lot for your input. Gerry

3 2

Kamailio Lord Balance
by Gaurav Bmotra 29 May '19

29 May '19

hi i m using kamailio 5.1 with Ubuntu 18.04.2 LTS and freeswitch as Media server -- *Regards:* Gaurav Kumar

4 4

RFC: split out old sr api from app_lua
by Daniel-Constantin Mierla 29 May '19

29 May '19

Hello, I am considering to split the app_lua module in order to move the older style API available under Lua 'sr' module in a dedicated module (like app_lua_sr). Later this module can be obsoleted and removed, once we know that everything there is covered by KEMI KSR Lua module. In this way, we make it more clear that KSR is the preferred API to use as well have the app_lua smaller, for those using only KSR and not needing 'sr' API. Therefore I am starting the discussion to see if anyone has something against or other suggestions. I cc-ed sr-dev to make developers aware, but I think the best place for discussion is sr-users, being related to how Kamailio is used, therefore reply only to sr-users. Cheers, Daniel -- Daniel-Constantin Mierla -- www.asipto.com www.twitter.com/miconda -- www.linkedin.com/in/miconda

2 2

RTPEngine / Transcoding question
by Carsten Bock 29 May '19

29 May '19

Hi, I want to implement selective transcoding, e.g. avoiding Transcoding between a HD codec (G722) and a non HD Codec (G711). In case the caller does offer HD codecs, this is fine, e.g. if(sdp_with_codecs_by_name("G722,OPUS")) { rtpengine_offer("codec-transcode=OPUS codec-transcode=G722 codec-transcode=PCMA"); } else { rtpengine_manage("codec-transcode=PCMA"); } Now I have the issue, if the callee only sends me G711, I don't want to offer G722 or Opus to the caller. However, rtpengine_answer() does not seem to accept "codec-strip=G722 codec-strip=OPUS", e.g.: onreply_route() { if(!sdp_with_codecs_by_name("G722,OPUS")) { rtpengine_ manage("codec-strip=OPUS codec-strip=G722"); } } As a result, the SDP always contains the transcoding options, e.g. G722 and OPUS. I always end up in transcoding G722 to G711, which is meaningless in that case. Any ideas on how to solve that? (above examples very simplified) Thanks, Carsten -- Carsten Bock I Managing Director ng-voice GmbH Millerntorplatz 1 I 20359 Hamburg I Germany www.ng-voice.com Mobile +49 (0)179-20 21 244 I Direct +49 (0)40-52 47 593-40 I Fax +49 (0)40-52 47 593-99 Sitz der Gesellschaft: Hamburg Registergericht: Amtsgericht Hamburg, HRB 120189 Geschäftsführer: Carsten Bock, Dr. David Bachmann Ust-ID: DE279344284 Hier finden Sie unsere handelsrechtlichen Pflichtangaben: http://www.ng-voice.com/imprint/

2 5

RTPEngine: rtpengine_manage(), Subsequent requests, Transcoding
by Carsten Bock 29 May '19

29 May '19

Hi, quick question: If understood it correctly in the past (and it worked for me quite well this way), I can simply call rtpengine_manage() for subsequent requests without adding any additional information (e.g. used interfaces, RTP/SRTP translation or anything like that), as this information is stored in the internal hash table of the RTPEngine module during call setup and initial offer/answer. However, this does not seem to apply to the transcoding options. When I just call "rtpengine_manage()" for a Re-INVITE of a transcoded call (in my case AMR-WB to G722), the transcoding options are no longer applied. The forwarded offer does not get the transcoded codecs added (e.g. in my case G722 is not added to the list of AMR/AMR-WB from the phone). Did I misunderstand something or is it a bug? My RTPEngine is still on 7.2, but I will double check with more recent versions today or tomorrow. However, I also found no commit messages relating to this. Thanks, Carsten -- Carsten Bock I Managing Director ng-voice GmbH Millerntorplatz 1 I 20359 Hamburg I Germany www.ng-voice.com Mobile +49 (0)179-20 21 244 I Direct +49 (0)40-52 47 593-40 I Fax +49 (0)40-52 47 593-99 Sitz der Gesellschaft: Hamburg Registergericht: Amtsgericht Hamburg, HRB 120189 Geschäftsführer: Carsten Bock, Dr. David Bachmann Ust-ID: DE279344284 Hier finden Sie unsere handelsrechtlichen Pflichtangaben: http://www.ng-voice.com/imprint/

3 2

Call Routing at IMS
by Iman Mohammadi 29 May '19

29 May '19

Hi Everyone When P-CSCF receives INVITE from client it sends INVITE to S-CSCF then S-CSCF without any look up(checking the user is registered or not)sends INVITE to I-CSCF then I-CSCF sends LIR and receives LIA and sends INVITE to same S-CSCF (in case of one S-CSCF exists).My Question is here why without any look up S-CSCF sends INVITE to I-CSCF??this procedure affects system performance and increases call set up time

2 1

WebRTC bad message (offset: 22)
by Ilie Soltanici 28 May '19

28 May '19

Hello, Can someone help me to discard those messages from kamailio log files? ERROR: <core> [core/parser/parse_fline.c:262]: parse_first_line(): parse_first_line: bad message (offset: 22) ERROR: <core> [core/parser/msg_parser.c:681]: parse_msg(): ERROR: parse_msg: message=<HTTP/1.1 101 Switching Protocols#015#012Sia: SIP/2.0/TLS 212.2.161.34:60477#015#012Sec-WebSocket-Protocol: sip#015#012Upgrade: websocket#015#012Connection: upgrade#015#012Sec-WebSocket-Accept: VeiXbJClWneIrIyYgM5v3XKYHLA=#015#012Server: WebRTC GW#015#012Content-Length: 0#015#012#015#012> As I understand this is just an HTTP response to the first request, and shouldn't go through config file execution, but I don't understand why it is getting through it. Thank you

1 0

kamailio webrtc 183 early media.
by Zhan Bazarov 28 May '19

28 May '19

Hello! I have setup kamailio+rtpengine+asterisk.. And I have issue with early media for WEBrtc endpoints... As I understood right, for this case I need to use rel100(PRACK) for sending early media... But I didn't find any example for solve this issue... Can you help me with it? It would be greatly appreciated!

1 0

mem leak on 5.1.2?
by Andrew Chen 27 May '19

27 May '19

Hey guys, Need some help with possible run away memory issue on my 5.1.2 Kamailio. I noticed I'm getting this memory error from kam logs: May 24 13:47:52 ashintgtpsg51 /usr/sbin/kamailio[1857]: WARNING: http_client [functions.c:298]: curL_query_url(): Curl library out of memory (url:https://<some url>) my -m on kamailio startup is currently set to 64 but there is only 1 call going through. In our check_mk, I noticed the memory usage is ramping up: [image: image.png] What's the cause of this? -- Andy Chen Sr. Telephony Lead Engineer achen@ <achen(a)thinkingphones.com>fuze.com -- *Confidentiality Notice: The information contained in this e-mail and any attachments may be confidential. If you are not an intended recipient, you are hereby notified that any dissemination, distribution or copying of this e-mail is strictly prohibited. If you have received this e-mail in error, please notify the sender and permanently delete the e-mail and any attachments immediately. You should not retain, copy or use this e-mail or any attachment for any purpose, nor disclose all or any part of the contents to any other person. Thank you.*

4 8

Getting the following error when sending INVITE request for calling
by Mohit Chawla 27 May '19

27 May '19

Hi , I am getting the following error in trying to send INVITE message from SIP client. {2 2 INVITE 4_Do2VIMWLR6Wf5ubiBxgg..} NOTICE: acc [acc.c:281]: acc_log_request(): ACC: transaction answered: timestamp=1558902843;method=INVITE;from_tag=69588468;to_tag=ebd29a60;call_id=4_Do2VIMWLR6Wf5ubiBxgg..;code=200;reason=OK;src_user=1016;src_domain=172.25.22.23;src_ip=172.25.22.40;dst_ouser=1015;dst_user=1015;dst_domain=172.25.22.40 May 27 02:04:03 epc-srv-03 /usr/sbin/kamailio[17238]: {2 2 INVITE 4_Do2VIMWLR6Wf5ubiBxgg..} ERROR: db_mysql [km_dbase.c:128]: db_mysql_submit_query(): driver error on query: Unknown column 'src_user' in 'field list' (1054) May 27 02:04:03 epc-srv-03 /usr/sbin/kamailio[17238]: {2 2 INVITE 4_Do2VIMWLR6Wf5ubiBxgg..} ERROR: <core> [db_query.c:243]: db_do_insert_cmd(): error while submitting query May 27 02:04:03 epc-srv-03 /usr/sbin/kamailio[17238]: {2 2 INVITE 4_Do2VIMWLR6Wf5ubiBxgg..} ERROR: acc [acc.c:477]: acc_db_request(): failed to insert into database May 27 02:04:10 epc-srv-03 /usr/sbin/kamailio[17229]: {2 3 BYE 4_Do2VIMWLR6Wf5ubiBxgg..} NOTICE: acc [acc.c:281]: acc_log_request(): ACC: transaction answered: *Can anyone help me understand the reason for this error.* *I am attaching the used kamailio.cfg file in this message.* *Thanks and Regards,* *Mohit* -- _Disclaimer: This email and any files transmitted along with it may contain Azcom confidential and proprietary information. If you are not the intended recipient, you are notified that disclosing, copying, distributing or taking any action based on the contents of the information contained herein is strictly prohibited. If you are not an intended recipient of this transmission and you received it in error, please inform the sender by reply e-mail and destroy this and all other copies of this transmission to which you have access. The sender of this email or Azcom does not accept liability for any errors or omissions in the contents of this message that may occur as a result._

2 6

remove_hf() leaves junk in the headers?
by Oded Arbel 27 May '19

27 May '19

I'm trying to rewrite the `From` header in an invite going out to an external system (*), by calling remove_hf("From"); followed by append_hf("From: <some value>\r\n"); but the result is an invalid SIP message, because apparently after `remove_hf()` finishes, it leaves the content of $fU in place of the `From` header - just the raw text, without a header name or even a "\r\n" - and that eats the next header line and breaks the INVITE. Here is how the INVITE originally looks (without either `remove_hf()` or `append_hf()`): ---8<--- INVITE sip:972522353283@10.20.30.40:5060 SIP/2.0 Record-Route: <sip:10.90.80.70;lr;did=649.f0b> Via: SIP/2.0/UDP 10.90.80.70:5060;branch=z9hG4bK6188.ff5c4fd855bd2970fdf32d4807b114c2.0 Via: SIP/2.0/UDP 10.90.80.71:5066;received=10.90.80.71;branch=z9hG4bK581897a4;rport=5066 Max-Forwards: 69 From: <sip:972515340014@example.com:5066>;tag=as0bcee217 To: <sip:972522353283@10.20.30.40:5060> Contact: <sip:972515340014@10.90.80.71:5066> Call-ID: 722299dc15aad53d28172d433e8665f4@10.90.80.71:5066 CSeq: 102 INVITE User-Agent: Asterisk PBX 14.7.2 Date: Sun, 26 May 2019 14:42:52 GMT Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH, MESSAGE Supported: replaces X-CID: ad199638-4df3-4aef-81f1-1b50581032a7 Content-Type: application/sdp Content-Length: 280 v=0 o=root 817636675 817636675 IN IP4 10.50.60.70 s=Asterisk PBX 14.7.2 c=IN IP4 10.50.60.70 t=0 0 m=audio 39064 RTP/AVP 8 0 18 9 a=maxptime:60 a=rtpmap:8 PCMA/8000 a=rtpmap:0 PCMU/8000 a=rtpmap:18 G729/8000 a=rtpmap:9 G722/8000 a=sendrecv a=rtcp:39065 a=ptime:20 ---8<--- and here is another call with the same setup, with just `remove_hf("From");` being invoked (without calling `append_hf()` - this is just for reproduction): ---8<--- INVITE sip:972522353283@10.20.30.40:5060 SIP/2.0 Record-Route: <sip:10.90.80.70;lr;did=f45.91b1> Via: SIP/2.0/UDP 10.90.80.70:5060;branch=z9hG4bK024d.2690ebf7a809edca2208e6b2561ccf9e.0 Via: SIP/2.0/UDP 10.90.80.71:5066;received=10.90.80.71;branch=z9hG4bK79ae3073;rport=5066 Max-Forwards: 69 972515340014To: <sip:972522353283@10.20.30.40:5060> Contact: <sip:972515340014@10.90.80.71:5066> Call-ID: 7b20ba5a549f6f886c22985146765736@10.90.80.71:5066 CSeq: 102 INVITE User-Agent: Asterisk PBX 14.7.2 Date: Sun, 26 May 2019 14:44:20 GMT Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH, MESSAGE Supported: replaces X-CID: ffbb4ac1-3a0f-4dd6-9ce9-7ad24361081a Content-Type: application/sdp Content-Length: 280 v=0 o=root 509740923 509740923 IN IP4 10.50.60.70 s=Asterisk PBX 14.7.2 c=IN IP4 10.50.60.70 t=0 0 m=audio 39102 RTP/AVP 8 0 18 9 a=maxptime:60 a=rtpmap:8 PCMA/8000 a=rtpmap:0 PCMU/8000 a=rtpmap:18 G729/8000 a=rtpmap:9 G722/8000 a=sendrecv a=rtcp:39103 a=ptime:20 ---8<--- As you can see, the `From` header is indeed gone, but it left the $fU just before the `To` header. WTF? I'm running Kamailio 5.2.2 built locally. Notes: *) the problem I'm trying to solve is that I can't get my Asterisk installation to generate the `From` header I want, the reason is out of scope of this question, so I'm sending custom SIP headers over to Kamaiio and I want to rewrite the header in Kamailio to the "correct" value. -- Oded Arbel

6 8

PRE-PAY update timer
by Steve Bucklin 25 May '19

25 May '19

Hello all (again), I am looking at a 'good' method to start a call with "chunks" of time allocated. I wish the initial call to check a credit, and if credit is good, allow a small amount of time (say 30 seconds). I have enabled DIALOG and have looked at CNXCC, but am confused! When the initial 30 seconds runs out, I want to authorise another 30 seconds, etc, etc, etc. I have started to play and set a dialog timer that expires to a route, and then can 'return' allowing the call to continue - BUT was not able to reset the dialog timer to trip again after another 30 seconds. I tried to 'set_max_time' on cnxcc, but this did not seem to trip the event route upon timeout? Does anyone have a pointer to any examples? I also am unsure of how to update the timer and keep a call in play! Steve

5 4

No Private memory left using usrloc with db_redis in mode 3
by José Seabra 24 May '19

24 May '19

Hello there, i have stored ~200 000 registrations contacts in redis database and when kamailio starts looking for expired contacts in redis then it starts giving these errors: WARNING: PR_LOG: 123: db_redis [redis_dbase.c:1099]: db_redis_perform_query(): performing full table scan on table 'location' while performing query WARNING: PR_LOG: 123: db_redis [redis_dbase.c:1102]: db_redis_perform_query(): scan key 0 is 'expires' *WARNING: PR_LOG: 123: db_redis [redis_dbase.c:1102]: db_redis_perform_query(): scan key 1 is 'expires'* *ERROR: PR_LOG: 123: <core> [core/mem/q_malloc.c:291]: qm_find_free(): qm_find_free(0x7ff80922b010, 3055920); Free fragment not found!* *ERROR: PR_LOG: 123: <core> [core/mem/q_malloc.c:425]: qm_malloc(): qm_malloc(0x7ff80922b010, 3055920) called from core: db_res.c: db_allocate_rows(183), module: core; Free fragment not found!* *ERROR: PR_LOG: 123: <core> [db_res.c:185]: db_allocate_rows(): no private memory left* *ERROR: PR_LOG: 123: db_redis [redis_dbase.c:1115]: db_redis_perform_query(): Failed to allocate memory for rows * I have configured the private memory to 128 MB but seems that isn't enough to handle with all these contacts. Is the only option here increase the private memory or there is any other kind of configuration(in redis or kamailio) that i can make to avoid this? Best Regards José Seabra -- Cumprimentos José Seabra

2 1

Re: [SR-Users] Kamailio IMS installation from pacakges
by Mohit Chawla 24 May '19

24 May '19

Hi, My name is Mohit Chawla working on LTE Network integration with Kamailio IMS server. We are facing issues in installation & Configuring of kamailio IMS on CentOS 7 due to no documentation is available on web (or at least I am not able to find one). Primarily I am interested in installing packages (not building from source code as of now) and use it for further testing. I can go with building the package from source if its more easier and quick. Can you guys help me share any document/wiki which is helpful for my cause ? I will be really grateful if someone can reply me by today. Thanks and Regards, Mohit From: Mohit Chawla [mailto:mohit.chawla@azcom.in] Sent: Wednesday, May 22, 2019 5:57 PM To: 'sr-users(a)lists.kamailio.org' Subject: Kamailio IMS installation from pacakges Hi, My name is Mohit Chawla working on LTE Network integration with Kamailio IMS server. We are facing issues in installation & Configuring of kamailio IMS on CentOS 7 due to no documentation is available on web (or at least I am not able to find one). Primarily I am interested in installing packages (not building from source code as of now) and use it for further testing. I can go with building the package from source if its more easier and quick. Can you guys help me share any document/wiki which is helpful for my cause ? I will be really grateful if someone can reply me by today. Thanks and Regards, Mohit -- _Disclaimer: This email and any files transmitted along with it may contain Azcom confidential and proprietary information. If you are not the intended recipient, you are notified that disclosing, copying, distributing or taking any action based on the contents of the information contained herein is strictly prohibited. If you are not an intended recipient of this transmission and you received it in error, please inform the sender by reply e-mail and destroy this and all other copies of this transmission to which you have access. The sender of this email or Azcom does not accept liability for any errors or omissions in the contents of this message that may occur as a result._

2 3

Use of kamailio as IMS server to integrate with LTE Core Network
by Mohit Chawla 24 May '19

24 May '19

Hi , We have successfully installed the kamailio IMS server on centOS 7 using the following link (http://www.kamailio.org/wiki/tutorials/ims/installation-howto) with appropriate changes for command in CentOS 7. We are currently trying to integrate the PCSCF module with LTE Core network , but I don't have any idea how to do this. Neither I am able to find any tutorials which I can use to understand how kamailio works. Can anyone share any reference document to help me understand the kamailio working in my use case. Thanks and Regards, Mohit -- _Disclaimer: This email and any files transmitted along with it may contain Azcom confidential and proprietary information. If you are not the intended recipient, you are notified that disclosing, copying, distributing or taking any action based on the contents of the information contained herein is strictly prohibited. If you are not an intended recipient of this transmission and you received it in error, please inform the sender by reply e-mail and destroy this and all other copies of this transmission to which you have access. The sender of this email or Azcom does not accept liability for any errors or omissions in the contents of this message that may occur as a result._

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users