sr-users

sr-users@lists.kamailio.org

42 participants
37455 discussions

[Users] mi_xmlrpc - versions of dependancies for - libxml, libxmlrpc-c3, libxmlrpc-c3-dev
by Steven Halerman 17 Jan '07

17 Jan '07

I have been trying to make mi_xmlrpc (from cvs head). I am running Fedora Core 3 - gcc version 3.4.4 I get the following error: xr_server.c:37:26: xmlrpc_abyss.h: No such file or directory mi_xmlrpc.c:44:26: xmlrpc_abyss.h: No such file or directory In file included from /usr/local/include/xmlrpc-c/base.h:9, from /usr/local/include/xmlrpc.h:1, from mi_xmlrpc.h:35, from mi_xmlrpc.c:38: /usr/local/include/xmlrpc-c/util.h:20:56: xmlrpc-c/c_util.h: No such file or dir ectory In file included from /usr/local/include/xmlrpc-c/base.h:9, from /usr/local/include/xmlrpc.h:1, from mi_xmlrpc.h:35, from mi_xmlrpc.c:38: /usr/local/include/xmlrpc-c/util.h:150: error: syntax error before "GNU_PRINTF_A TTR" /usr/local/include/xmlrpc-c/util.h:158: error: syntax error before "GNU_PRINTF_A TTR" mi_xmlrpc.c:44:26: xmlrpc_abyss.h: No such file or directory mi_xmlrpc.c: In function `mod_child_init': mi_xmlrpc.c:156: warning: implicit declaration of function `xmlrpc_server_abyss_ init_registry' mi_xmlrpc.c:166: error: `xmlrpc_server_abyss_rpc2_handler' undeclared (first use in this function) mi_xmlrpc.c:166: error: (Each undeclared identifier is reported only once mi_xmlrpc.c:166: error: for each function it appears in.) mi_xmlrpc.c:172: error: `xmlrpc_server_abyss_default_handler' undeclared (first use in this function) make[1]: *** [mi_xmlrpc.o] Error 1 what versions of libxml libxmlrpc-c3 libxmlrpc-c3-dev did you use to successfully compile? Thanks in advance Steven ____________________________________________________________________________________ Cheap talk? Check out Yahoo! Messenger's low PC-to-Phone call rates. http://voice.yahoo.com

2 1

[Serusers] inv_timeout from DB
by inge 17 Jan '07

17 Jan '07

Hi all, I learn about it in the archive, but I don't really get the good way. If I put in a usr_preferences table like, a value like i:40, how can I learn it and write into the inv_timeout ? I'm not very far of the good result, but this is the point where I block. Thanks for your support.

1 1

[Serusers] Ser 0.10.x CVS and MySQL module
by Daniel Corbe 17 Jan '07

17 Jan '07

For some reason the mysql module for ser compiled cleanly but SER refuses to load it. IE # ser -c 0(28131) ERROR: load_module: could not open module </usr/local/lib/ser/modules/mysql.so>: Cannot load specified object 0(28131) parse error (55,13-14): failed to load module ERROR: bad config file (1 errors) It does exist, is installed and was compile from the same sources as the SER core. I'm not sure what I'm doing wrong. Thanks. -Daniel

3 6

[Users] RTP without proxying, Linksys 3102
by Bill Neely 16 Jan '07

16 Jan '07

Has anyone come up with a method for getting a NATED Linksys 3102 to talk to another NATED UA? I see that it has something to do with the 3102 being a symmetric NAT device. I have tried setting fix_nated_register and force_rport, but this doesn't do it (still no RTP going back and forth). I know we could fix this by setting up a proxy server, but we have bandwidth reasons for not wanting to do this. Can provide openser.cfg if anyone would like to look at it. -- 702-874-3833 1-866-553-3833

2 2

[Users] SER Accounting
by Arun Kumar 16 Jan '07

16 Jan '07

Hi, My ser and asterisk are working fine and able to send calls each other. When my ser sends call to my asterisk, my asterisk ask for pin to place call but as soon as it ask for pin ser starts accouting (ack). Is there any why that my accounting starts only when it connects to actual number that I want to dial. thanks arun

3 5

[Users] SER wrong accounting
by Arun Kumar 16 Jan '07

16 Jan '07

Hi, I've configured my ser to send calls to my asterisk server and doing well. When call reaches to my asterisk server, asterisk will ask for pin to place a call. Here is my question: When I place it sends invite to my asterisk and accounting will store this invite time and when asterisk ask for pin (ack) my ser stores this as ack time and when I disconnect the call (bye) it will store the bye time. But my call is not connected to my actual number. Is there any why that accounting only start when actual call get connect. thanks arun

3 3

[Serusers] MetaSwitch
by Bill Hissong 16 Jan '07

16 Jan '07

Anyone have SER talking to MetaSwitch? I am looking for pointers on the MetaSwitch as well as SER. I have them talking, just not nicely. Bill

1 0

[Users] openser+freeradius+mysql
by yuan zhao 16 Jan '07

16 Jan '07

Hi all, I use the document to build l the system with openser+freeradius+mysql( http://www.openser.org/docs/openser-radius-1.0.x.html), +---------+ +---------+ | PHONE 1 | <--SIP-- + +-------------------+ | STORAGE | +---------+ | SIP SERVER | +----+----+ #===> | (OpenSER) | | ........... | |-------------------| +-------+-------+ | | RADIUS CLIENT|<==AAA==> | RADIUS SERVER | +---------+ | | (radiusclient-ng) | | (FreeRADIUS) | | PHONE N |<--SIP--+ +-------------------+ +---------------+ +---------+ I have two linux PCs.the one install Openser and radius client ,and another install freeradius and DATABASE of mysql .But the document said the Openser also need mysql ,then I have a question, what is the function about the mysql of openser? Maybe it can place the users inforamtion of register,but for freeradius, what about the function ? Then I have another question,I install the system step by step with the document ,and the ua can register correctly,but a few minutes it will break down, the ua said it's time out ,can you give me some suggestion ?can I find other openesr+ freeradius documents except *openser-radius-1.0.x.html* . thaks.

2 1

[Users] Accessing data from reply route in failure route
by T.R. Missner 16 Jan '07

16 Jan '07

Hello, I have a need to pass info contained in a X-header within a 300 message to the failure-route or branch-route for inclusion in a new INVITE which results from the redirect. Is there a mechanism available that would allow me to do this? AVPs are not available in the reply route. Thanks, T.R.

3 2

[Users] NEW FEATURE: branch and script flags
by Bogdan-Andrei Iancu 16 Jan '07

16 Jan '07

Hi everybody, Following some discussions with Juha regarding some extension for the branch flags, we decided it is better to have a re-design of flags in openser to allow a better flexibility and extensibility without any consistency penalties. What we had so far: - message flags (or transaction flags) which are transaction persistent - pseudo-branch flags - a set of flags from the message flags were handled by TM as branch flags (saved per branch and not only per transaction). What we have now: - message flags (or transaction flags) will works as they do now, but the branch mask will be removed (rolling back as in 0.9.x versions). These flags are transaction persistent. - branch flags (NEW) are saved also in transaction, but per branch; also they will be saved in usrloc (per contact). A new set of functions were added for manipulating these flags from script. So, there flags will be registration persistent and branch persistent. - script flags (NEW) are no-message-related flags - they are only script persistent and you can strictly use them for scripting. Once you exit a top level route, they will be lost. These flags are useful and they offer an option to de-congest the message flags - many flags have no need to be saved as they just reflect some scripting status. What changes brings this: - NAT flag will become a branch flag all the time. - you can have custom flags to be saved into usrloc (via branch flags). - more flags in script (via script flags). Corresponding Functions: Message/transaction flags: setflag(flag_idx) resetflag(flag_idx) isflagset(flag_idx) Branch flags: setbflag/setbranchflag(branch_idx,flag_idx) resetbflag/resetbranchflag(branch_idx,flag_idx) isbflagset/isbranchflagset(branch_idx,flag_idx) or, the shorter format, working on the default (branch 0) flags: setbflag(flag_idx) resetbflag(flag_idx) isbflagset(flag_idx) Script flags: setsflag/setscriptflag(flag_idx) resetsflag/resetscriptflag(flag_idx) issflagset/isscriptflagset(flag_idx) Flags and Pseudo Variables Message/transaction flags $mf (decimal) , $mF (hexa) Branch flags $bf (decimal) , $bF (hexa) Script flags $sf (decimal) , $sF (hexa) Flags and routes: Message/transaction flags These flags will show up in all routes where messages related to the initial request are processed. So, they will be visible and changeable in onbranch, failure and onreply routes; the flags will be visible in all branch routes; if you change a flag in a branch route, the next branch routes will inherit the change. Branch flags There flags will show up in all routes where messages related to initial branch request are processed. So, in branch route you will see different sets of flags (as they are different branches); in onreply route yo will see the branch flags corresponding to the branch the reply belongs to; in failure route, the branch flags corresponding to the branch the winning reply belongs to will be visible. In request route, you can have multiple branches (as a result of a lookup(), enum query, append_branch(), etc) - the default branch is 0 (corresponding to the RURI); In reply routes there will be only one branch , the 0 one. In branch route the default branch is the current process branch (having index 0); In failure route, initialy there is only one branch (index 0), corresponding the the failed branch. Script flags There flags are available only in script and are reset after each top level route execution (routes internally triggered by OpenSER). They will be persistent per main route, onreply_route, branch_route, failure_route. Note they will be inherit in routes called from other routes. Example: nat flag handling .......... # 3 - the nat flag modparam("usrloc","nat_bflag",3) .......... route { .......... if (nat detected) setbflag(3); # set branch flag 3 for the branch 0 .......... if (is_method("REGISTER")) { # the branch flags (including 3) will be saved into location save("location"); exit; } else { # lookup will load the branch flag from location if (!lookup("location")) { sl_send_reply("404","Not Found"); exit; } t_on_branch("1") t_relay(); } } onbranch_route[1] { xlog("-------branch=$T_branch_idx, branch flags=$bF\n"); if (isbflagset(3)) { #current branch is marked as natted ......... } } if no parallel forking is done, you can get rid of the branch route and add instead of t_on_branch(): ........ if (isbflagset(3)) { #current branch is marked as natted ......... } ......... I will upload this description on the wiki page to be more accessible - in the mean while, any feedback (reports, better ideas, bugd) are welcome! Regards, Bogdan

4 6

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users