sr-users

sr-users@lists.kamailio.org

7 participants
37566 discussions

[Serusers] TECHNICAL BOARD - Nomination and voting is open!
by Greger V. Teigre 25 May '07

25 May '07

Everybody should by now have had plenty of time to provide feedback, input, and objections to the proposed rules for an iptel.org technical board. I have noted one correction to the original summary on April 28: adding semsdev(a)iptel.org as a nomination and voting list. I have taken this correction into the rules and established a permanent page describing the rules for a technical board. I conclude that we have reached a consensus as described here: http://www.iptel.org/technicalboard/rules According to the rules, we shall nominate one candidate from SEMS, two candidates with SER CVS write access, and two candidates from the wider SER community. Feel free to nominate and vote on up to five candidates in the same post. Raphael Coeffic has been nominated as SEMS representative and already started to receive votes. g-)

7 14

[Serusers] Call Forward Redirection By server(SER)
by Cyprian Clement 25 May '07

25 May '07

Hello Community, I have managed to setup my SER to do serial forking(CFU) by simply intercepting the incoming INVITE and generating a new INVITE to a user that is different from the one contained in the original invite. This means the user ID of the Request URI generated by the SER is different from that of the original/received RURI. I am currently working on the Call Forward (CFU, CFB, CFNA) scenarios. I would like to configure the SER in such a way that it generates the 302 message back to the caller and this 302 contains the contact of the third party that the caller needs to get in touch with. Basically, the caller should generate a new INVITE to this third party since the intended target has had his phone activated with the CF feature. I currently managed to get the SER do the serial forking(i.e. without sending back the 302) using the AVPops madule as instructed in the User Guide. Does the AVPops do the redirection too? if yes, then I will really appreciate to hear your helping info on how to achieve this. Many thanks in advance. Cyp. --------PS: if anything is unclear I can clarify. ___________________________________________________________ Yahoo! Answers - Got a question? Someone out there knows the answer. Try it now. http://uk.answers.yahoo.com/

1 0

Re: [Users] How to log the username of caller and callee to acc table?
by Bogdan-Andrei Iancu 25 May '07

25 May '07

Charles, glad to help - all the changes between the versions are documented on the web site. See: http://www.openser.org/dokuwiki/doku.php/install:1.1.x-to-1.2.x regards, bogdan Charles Wang wrote: > Dear Bogdan, > > Thank you for your important information. > It helps me to solve my problems. > I add four fields to DB and use db_extra to insert them. > > modparam("acc", "db_extra", "from_uri=$fu ; sip_from=$hdr(From) ; > to_uri=$tu ; sip_to=$hdr(To)") > > > > Best regards, > Charles > > 2007/5/18, Bogdan-Andrei Iancu <bogdan(a)voice-system.ro > <mailto:bogdan@voice-system.ro>>: > > Hi Charles, > > in openser 1.2 only a few mandatory info about the SIP transaction are > accounted. If you want something more, use the the extra accounting. > For, example, for db, to get the from uri, so: > > modparam("acc","db_extra","from_uri=$fu ; sip_from=$hdr(From)") > > Note, you need to create the new columns in the acc table. See > http://www.openser.org/docs/modules/1.2.x/acc.html#ACC-EXTRA-ID > > regards, > bogdan > > Charles Wang wrote: > > Hi all, > > > > I ever used SER and I know it will save the From information such as > > 101(a)192.168.11.200 <mailto:101@192.168.11.200> > <mailto:101@192.168.11.200 <mailto:101@192.168.11.200>> to > sip_from or from_uri > > in its acc table. > > But in my openser, I also setup the acc module. Where is my > caller info? > > > > I can find a lot of number such as "2806655523" in my from_tag. > > I wanna store the caller and callee info in my acc table when I > make > > an internal call or an external call. > > > > Can anybody kind to help me to solve it? or give me some tips > please. > > PS: I got this openser.cfg from http://www.sipwise.com/wizard > <http://www.sipwise.com/wizard>. > > > > Best regards, > > Charles > > > > > -- > > Best Regards > Charles

2 2

Re: [Users] Not able to add users
by Henning Westerholt 25 May '07

25 May '07

On Freitag, 25. Mai 2007, you wrote: > Hi Henning, > > I have added the mysql module into my configuration file. Can you please > tell me how to and where to look for log files, indicating any problems > with database connectivity > > Thanks, > Kiran. Hi, increase the debug level in your config, and look in your system logfile (/var/log/messages on debian, could differ on your system) for messages. Henning P.S: please CC to the list

3 2

Re: [Users] failure_route problem
by Klaus Darilion 25 May '07

25 May '07

openser uses syslog logging. The destination of the logs is distribution dependent. E.g. debian based -->/var/log/syslog, redhat based --> /var/log/messages. Read http://openser.org/dokuwiki/doku.php/tutorials:debug-syslog-messages for details about to configure logging. regards klaus ps: please cc the list Yago Bargalló wrote: > Sorry, but I've tried to use xlog but I don't know where logs are printed. In which file does logs saved?? > > Thanks...!! > > > -----Mensaje original----- > De: Klaus Darilion [mailto:klaus.mailinglists@pernau.at] > Enviado el: jueves, 24 de mayo de 2007 14:42 > Para: Yago Bargalló > CC: users(a)openser.org > Asunto: Re: [Users] failure_route problem > > Add xlog statements to your config and watch syslog. This is how you can > trace if the failure route is executed. Further you can set debug=4 to > see debug messages of openser. > > Further watch the SIP traffic using ngrep and dump it here > > regards > klaus > > > > > Yago Bargalló wrote: >> Hello, >> >> First of all thaks to Kraus for his quick reply on my last question. However I can't do openser work fine. >> >> I'm trying to use failure_route as follows, can anybody tell me which could be the problem?? >> >> >> >> (...) >> >> modparam("tm", "fr_inv_timer" , 10) >> >> >> >> # timer for response to a request >> >> modparam("tm","fr_timer", 4) >> >> >> >> >> >> # ------------------------- request routing logic ------------------- >> >> >> >> # main routing logic >> >> >> >> route{ >> >> (...) >> >> if (uri==myself) { >> >> (...) >> >> # Redirecciono cap a l'asterisk si marquen una extensió que comença per 3 >> >> >> >> if(uri=~"sip:2[0-9]+@" && method=="INVITE") { >> >> t_on_failure("1"); >> >> } >> >> (...) >> >> route(1); >> >> } >> >> >> >> >> >> route[1] { >> >> # send it out now; use stateful forwarding as it works reliably >> >> # even for UDP2TCP >> >> if (!t_relay()) { >> >> sl_reply_error(); >> >> }; >> >> exit; >> >> } >> >> >> >> failure_route[1]{ >> >> rewritehostport("172.16.51.160"); #asterisk >> >> rewriteuser("2002"); >> >> append_branch(); >> >> t_relay(); >> >> exit; >> >> } >> >> >> >> >> >> With this openser.cfg the call is cancelled after fr_inv_timer and failure_route[1] doesn't work but, however, if I do this: >> >> >> >> route{ >> >> (...) >> >> if (uri==myself) { >> >> (...) >> >> # Redirecciono cap a l'asterisk si marquen una extensió que comença per 3 >> >> >> >> if(uri=~"sip:2[0-9]+@" && method=="INVITE") { >> >> à rewritehostport("172.16.51.160"); #asterisk >> >> à rewriteuser("2002"); >> >> t_relay(); >> >> exit; >> >> } >> >> (...) >> >> route(1); >> >> } >> >> >> >> If I use this the call is redirected to my asterisk but using the failure_route as my first openser.cfg it does't work. >> >> >> >> Which is my problem?? >> >> >> >> Thanks.... >> >> >> >> >> >> >> >> >> >> >> ------------------------------------------------------------------------ >> >> _______________________________________________ >> Users mailing list >> Users(a)openser.org >> http://openser.org/cgi-bin/mailman/listinfo/users > >

1 0

RE: [Users] Interaction Presence Agent - Presence User Agent
by Schumann Sebastian 25 May '07

25 May '07

Perfect! Thanks for quick answer, Anca! Sebastian -----Original Message----- From: Anca-Maria Vamanu [mailto:anca@voice-system.ro] Sent: Friday, May 25, 2007 11:14 AM To: Schumann Sebastian Cc: users(a)openser.org Subject: Re: [Users] Interaction Presence Agent - Presence User Agent Hello, There is already a means to do that but in the trunk version. You should just give the command with expires -1 and the pua module will refresh Publish until you give a command with expires 0. regards, Anca Schumann Sebastian wrote: > Dear all, > > > > I have a question for understanding: I have implemented one OpenSER as > Registrar and one OpenSER as Presence Agent plus XCAP Server 1.0.0. > This is all working so far with newest SVN Release (Big Thanks to > Ovidiu and Anca for the hint) of OpenSER. > > > > Now I want to deploy a Web-Front-End for user interaction with the > Presence Core, because not all clients used are SIMPLE capable. User > of non-capable devices should be able to just login and change their > presence state. They do not necessarily have to be registered at the > registrar, why PUA+ pua_usrloc on registrar side is no choice. > > > > I was thinking about another OpenSER deployed as PUA plus the pua_mi > module for a solution. It gets commands from Web-Frontend via PHP, > forwarded to the FIFO with pua_mi module. The problem I have now is > that the messages are sent just once. Means a user changes his > presence state, PUA sends a PUBLISH to PA but after the expiry the > user appears to be offline. > > > > Is there any possiblitiy to let the PUA send messages constantly, when > the user selects online - means all the time until offline is > selected? I was thinking about many possiblities (cronjob or > shellscript running all the time during online time and sending data > to FIFO) but they are more or less just work-arounds. > > > > Best regards > > Sebastian > > > > **Sebastian Schumann** > > Diploma Student Architecture and Design Department > > > > Slovak Telekom, a. s. > > T-Com, Operations Unit > > Production and Service Division > > Innovations and Enterprise Solution Subunit > > > > Address: Namestie Slobody 6, 817 62 Bratislava, Slovakia > > Office: Room 232, Jarabinkova 1, 821 09 Bratislava, Slovakia > > > > +421 910 643010 (mobile) > > > > sebastian.schumann(a)t-com.sk <mailto:sebastian.schumann@t-com.sk> > > http://www.t-com.sk > >----------------------------------------------------------------------- - > >_______________________________________________ >Users mailing list >Users(a)openser.org >http://openser.org/cgi-bin/mailman/listinfo/users > >

1 0

[Serusers] INFO: Overview page of nominations for technical board
by Greger V. Teigre 25 May '07

25 May '07

As requested, here is a page for tracking nominations and status for the technical board: http://www.iptel.org/nominations_and_voting_technical_board_2007

1 1

[Serusers] How set up proxy to process messages
by Nguyen Tuan 25 May '07

25 May '07

Hi everyone, I have problem with set up proxy to process message INVITE. I have 2 SIP users of different domain. How can I set up proxy for each domain to process message INVITE from one domain to another? Now when user 1 of domain A send INVITE message to user2 of domain B then message go to direct to server of domain B, do main route{} block of B and then send to user2. I need the INVITE message of user 1 the first go to proxy of domain A, process that message (do main route{} block) and then send that message to proxy of domain B, process it (do main route{})and then send to user 2. Thanks, Tuan.

2 1

[Serusers] ANNOUNCEMENT: New serdoc mailing list for documentation work
by Greger V. Teigre 25 May '07

25 May '07

Dear all, We have just created a new mailing list called serdoc(a)iptel.org. The list will be used for coordination, questions, doc patches, and discussions/input on any iptel.org documentation. The main ongoing efforts right now are: - Migration guide to 2.0 - Reference guide - SER - Getting Started and the configuration files - Improve module documentation Other documentation work also for other projects like sems, serweb, rtpproxy etc will be covered on this list. Developer or user, please consider subscribing to the list and contribute to an improved iptel.org documentation! http://lists.iptel.org/mailman/listinfo/serdoc Thanks, g-)

1 0

Re: [Serusers] behind 2 routers
by karl lu 24 May '07

24 May '07

Hi Ram, Thank you for your reply. Do you mean read the "NAT Traversal with Media proxy" section in get started document or search for "NAT Traversal with Media proxy" in our emial archive? Thanks, Karl ram <talk2ram(a)gmail.com> wrote: Hi look NAT Traversal with Media proxy ram On 5/22/07, root <taishan02(a)yahoo.com> wrote: Hi, I have a DSL router, which has only one port. To connect multiple computers I have another 4 ports router behind this DSL router. So SER is behind two routers. How can I configure these two routers so that I can use SER in this situation? Thanks, _______________________________________________ Serusers mailing list Serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users