sr-users

sr-users@lists.kamailio.org

1 participants
37563 discussions

[Serusers] Configure SER to allow external SIP Calling
by Arun Kumar 26 May '07

26 May '07

HI I want to configure my SER (public ip) to allow call from external SIP users that is other than my sip domain. what I've to write in my ser.cfg if some one has code sample please send me. thanks arun

1 0

[Users] XCAP Lite 1.0.2 released
by Adrian Georgescu 26 May '07

26 May '07

Change log xcap-lite (1.0.2) unstable; urgency=low * Added requireRefreshWatchers flag per XCAP application * Added Persistent publication of data (RFC 4827) * Updated documentation The software can be downloaded from: http://download.dns-hosting.info/XCAP/xcap-lite-1.0.2.tar.gz Regards, Adrian

1 0

[Users] How to change To and From URI in SIP message ?
by mika.saari＠wipsl.com 26 May '07

26 May '07

Hi, I have to try changing the To and From URI like below: At the moment: To: sip:test1@test.com;tag=..... To be like: To: "test1"<sip:test1@test.com>;tag=... What would be the easiest way for doing this for presence NOTIFY SIP message ? Or if this can not be done with configuration system, then from where in the code the SIP message header is generated ? Thanks a lot, -Mika

3 2

[Users] presence module and retransmissions
by Klaus Darilion 25 May '07

25 May '07

Hi! Does presence module handles PUBLISH/SUBSCRIBE stateful or stateless? Thus, how should retransmission be handled. Will they be detected by presence module or is it possible to wrap the handle_publish inside t_newtran()? regards klaus

6 35

[Users] Presence module, NOTIFY, Max-Forward
by mika.saari＠wipsl.com 25 May '07

25 May '07

Hi, I noticed that this was already asked in mailing-list, but couldn't find any response, so thought to ask what is the opinion about this. Seems that all SIP stacks can not handle the NOTIFY message without Max-Forward. What kind of by pass options could be done for this, and is this problem something which will be checked in the future ? Thank you for any information, -Mika

2 1

[Users] Handling refer method with a device which does not support it
by Sergio Gutierrez 25 May '07

25 May '07

Hi everybody. We are trying to integrate a telephony platform based on Openser 1.2.0, with a Class-4 third party softswitch which does not support REFER method. Provider asks to us to change this method within Openser to INVITE method, so that the softswitch does not have to handle REFER but INVITE messages- Does somebody have any idea how to do that? We still think that solution is weird and difficult (and tricky), but, might be we are wrong. Thanks in advance for your help and attention. Sergio Gutiérrez EPM Telecomunicaciones S.A. E.S.P. Medellín Colombia-

3 4

[Serusers] SER-2.0.0, how to get list of registered UAs?
by Maxim Sobolev 25 May '07

25 May '07

Hi, In 0.9.x we have had the command "serctl ul show". The serctl tool seems to be non-functional in 2.0.0, could somehow explain how one is supposed to get list of in-memory contacts from the usrloc module in 2.0.0? In general it would be nice to have some "migration guide" started in WiKi so that people could share information like this. Personally I've spend quite lot of time migrating my 0.9.6 config to 2.0.0 and have quite few tips to share. Thanks for any hints! -Maxim

4 5

[Serusers] TECHNICAL BOARD - Nomination and voting is open!
by Greger V. Teigre 25 May '07

25 May '07

Everybody should by now have had plenty of time to provide feedback, input, and objections to the proposed rules for an iptel.org technical board. I have noted one correction to the original summary on April 28: adding semsdev(a)iptel.org as a nomination and voting list. I have taken this correction into the rules and established a permanent page describing the rules for a technical board. I conclude that we have reached a consensus as described here: http://www.iptel.org/technicalboard/rules According to the rules, we shall nominate one candidate from SEMS, two candidates with SER CVS write access, and two candidates from the wider SER community. Feel free to nominate and vote on up to five candidates in the same post. Raphael Coeffic has been nominated as SEMS representative and already started to receive votes. g-)

7 14

[Serusers] Call Forward Redirection By server(SER)
by Cyprian Clement 25 May '07

25 May '07

Hello Community, I have managed to setup my SER to do serial forking(CFU) by simply intercepting the incoming INVITE and generating a new INVITE to a user that is different from the one contained in the original invite. This means the user ID of the Request URI generated by the SER is different from that of the original/received RURI. I am currently working on the Call Forward (CFU, CFB, CFNA) scenarios. I would like to configure the SER in such a way that it generates the 302 message back to the caller and this 302 contains the contact of the third party that the caller needs to get in touch with. Basically, the caller should generate a new INVITE to this third party since the intended target has had his phone activated with the CF feature. I currently managed to get the SER do the serial forking(i.e. without sending back the 302) using the AVPops madule as instructed in the User Guide. Does the AVPops do the redirection too? if yes, then I will really appreciate to hear your helping info on how to achieve this. Many thanks in advance. Cyp. --------PS: if anything is unclear I can clarify. ___________________________________________________________ Yahoo! Answers - Got a question? Someone out there knows the answer. Try it now. http://uk.answers.yahoo.com/

1 0

Re: [Users] How to log the username of caller and callee to acc table?
by Bogdan-Andrei Iancu 25 May '07

25 May '07

Charles, glad to help - all the changes between the versions are documented on the web site. See: http://www.openser.org/dokuwiki/doku.php/install:1.1.x-to-1.2.x regards, bogdan Charles Wang wrote: > Dear Bogdan, > > Thank you for your important information. > It helps me to solve my problems. > I add four fields to DB and use db_extra to insert them. > > modparam("acc", "db_extra", "from_uri=$fu ; sip_from=$hdr(From) ; > to_uri=$tu ; sip_to=$hdr(To)") > > > > Best regards, > Charles > > 2007/5/18, Bogdan-Andrei Iancu <bogdan(a)voice-system.ro > <mailto:bogdan@voice-system.ro>>: > > Hi Charles, > > in openser 1.2 only a few mandatory info about the SIP transaction are > accounted. If you want something more, use the the extra accounting. > For, example, for db, to get the from uri, so: > > modparam("acc","db_extra","from_uri=$fu ; sip_from=$hdr(From)") > > Note, you need to create the new columns in the acc table. See > http://www.openser.org/docs/modules/1.2.x/acc.html#ACC-EXTRA-ID > > regards, > bogdan > > Charles Wang wrote: > > Hi all, > > > > I ever used SER and I know it will save the From information such as > > 101(a)192.168.11.200 <mailto:101@192.168.11.200> > <mailto:101@192.168.11.200 <mailto:101@192.168.11.200>> to > sip_from or from_uri > > in its acc table. > > But in my openser, I also setup the acc module. Where is my > caller info? > > > > I can find a lot of number such as "2806655523" in my from_tag. > > I wanna store the caller and callee info in my acc table when I > make > > an internal call or an external call. > > > > Can anybody kind to help me to solve it? or give me some tips > please. > > PS: I got this openser.cfg from http://www.sipwise.com/wizard > <http://www.sipwise.com/wizard>. > > > > Best regards, > > Charles > > > > > -- > > Best Regards > Charles

2 2

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users