sr-users

sr-users@lists.kamailio.org

20 participants
37471 discussions

[Kamailio-Users] FOSDEM2009 - first remarks/photos
by Daniel-Constantin Mierla 10 Feb '09

10 Feb '09

Hello, thanks to Alexandr Dubovikov, a selection of photos from FOSDEM2009 and Kamailio/SIP Router Meeting are now available at: http://www.kamailio.org/events/2009-FOSDEM/FOSDEM2009-Album/ Some movies should become available as well. As for the FOSDEM itself, there were a lot of sessions focusing on scalability for backends, mainly from MySQL track. There are some goodies that will help improving performance with 0-lines of code in the sip servers. I have been to XMPP interop, although they focused on Voice/Jingle, I tried the new purple module -- still some things to sort out and I will post a resume about this particular case and entire event. Cheers, Daniel -- Daniel-Constantin Mierla http://www.asipto.com

2 1

[Kamailio-Users] dialog enhancements #3
by Daniel-Constantin Mierla 09 Feb '09

09 Feb '09

Hello, the dialog module for upcoming release kamailio/openser 1.5.0 (http://www.kamailio.org/dokuwiki/doku.php/features:new-in-1.5.x) has the ability to execute a script route when a dialog timeouts. Just set the $dlg_ctx(timeout_route) before creating the dialog. route { ... $dlg_ctx(timeout_route) = 11; dlg_manage(); ... } route[11] { ... } Before the execution of timeout route the $dlg(...) psudo-variable is set to the expired dialog. One particular use case is to write full cdr, via sqlops and using $dlg(...) pseudo-variable. All functions that can be executed in a request route are safe here - there is a faked SIP message given as parameter. There are couple of other new properties that can be set before dialog creation: - send BYE at timeout - to make that happen you have to set: $dlg_ctx(timeout_bye) = 1; - set an integer that can be used as a bitmask flag checking later: $dlg_ctx(flags) = ...; Cheers, Daniel -- Daniel-Constantin Mierla http://www.asipto.com

1 0

[Kamailio-Users] errors installing on centos 5 64 bits
by Fabian Borot 06 Feb '09

06 Feb '09

Hello I am trying to install it on Centos 5 64 bits using this command: NICER=1 make prefix=/usr/local/kamailio-install-dir all and it fails with this message: make[1]: Entering directory `/usr/src/kamailio-1.4.3-notls/modules/db_mysql' Linking db_mysql.so /usr/bin/ld: skipping incompatible /usr/lib/libssl.so when searching for -lssl /usr/bin/ld: skipping incompatible /usr/lib/libssl.a when searching for -lssl /usr/bin/ld: cannot find -lssl collect2: ld returned 1 exit status make[1]: *** [db_mysql.so] Error 1 make[1]: Leaving directory `/usr/src/kamailio-1.4.3-notls/modules/db_mysql' make: *** [modules] Error 2 I think that somehow it is trying to use the lib for 32 bits or that my specific lib file is not what it should be or it is not on my system. I have the folders /usr/lib and usr/lib64 with its respective library files. Is this "libssl" related to openssl? I have these installed on my system already: [root@proxy1 lib64]# yum install openssl Setting up Install Process Parsing package install arguments Package openssl - 0.9.8b-10.el5_2.1.x86_64 is already installed. Package openssl - 0.9.8b-10.el5_2.1.i686 is already installed. Nothing to do [root@proxy1 lib64]# I also looked for "libssl" and this is what I see, it was only found in the folder for 32 bits libs if I am not mistaken. if that is the case how can i get the 64 bits equivalent? [root@proxy1 lib64]# find / -name "libssl.so" /usr/lib/libssl.so [root@proxy1 lib64]# thank you very much Fabian _________________________________________________________________ Windows Live™: E-mail. Chat. Share. Get more ways to connect. http://windowslive.com/online/hotmail?ocid=TXT_TAGLM_WL_HM_AE_Faster_022009

3 6

Re: [Kamailio-Users] nathelper module: function rtpproxy_stream2uac/uas
by Rash 06 Feb '09

06 Feb '09

Hi Daniel, thanks for the quick repsonse, you delivered the magic hint! Putting the count paramaeter into double quotes works. Thanks for your effort! Rash

2 1

[Kamailio-Users] nathelper module: function rtpproxy_stream2uac/uas
by Rash 06 Feb '09

06 Feb '09

Hello, I'm using latest version of Kamailio (OpenSER) from daily snapshot, as i wanted to test the rtpproxy_stream2uac function of the nathelper module in order to make announcements with rtpproxy. Integration of Kamailio and RTPProxy was successfull and I added the following line to the kamailio.cfg: rtpproxy_stream2uas("/var/rtpproxy/prompts/music_on_hold", -1); as described in the nathelper documentation ( http://www.kamailio.org/docs/modules/devel/nathelper.html#rtpproxy_stream2x… ) After adding this line to the appropriate section (onreply_route in my case) kamctl refuses to start.: kamailio: CRITICAL:core:yyerror: parse error in config file, line 414, column 29-30: syntax error kamailio: CRITICAL:core:yyerror: parse error in config file, line 414, column 30-31: bad arguments where line 414 corresponds to the line shown above. I can't find the error as the line is copied from nathelper module. Playing around with the parameters, didn't lead to anything. It would be nice if anyone could help or tryout the example from nathelper documentation and feedback. Best regards Rash

2 1

[Kamailio-Users] dialog enhancements #2
by Daniel-Constantin Mierla 06 Feb '09

06 Feb '09

Hello, another addition to the dialog module is the new pseudo-variable class $dlg(...) http://www.kamailio.org/dokuwiki/doku.php/pseudovariables:devel#dlg_attr With it you can get access to all attributes of current processed dialog, e.g., caller and callee URI, start time, flags... A typical use case is to write full cdr when the BYE comes over - the dialog stores the start time and you can get the end time via $Ts. You can either write the acc record at dialog ending or update the start acc event written when INVITE was processed - you have access to the call-id, from tag and to tag in the right order and one shot of sql_query() will do it. Cheers, Daniel

3 2

[Kamailio-Users] location table
by joy yue 05 Feb '09

05 Feb '09

Hi, Is there a limitation on the number of rows in location table? In my rig, whatever number of users I use (>2million users), I notice the number of users in location table is 343707, which is far less than the number of users in my test. I thought previously that location table saves all the users in my test. Also when I use large number of users (>2million), openser pops up an error: ERROR: registrar:update_contacts: invalid cseq for aor <xxxx>. Has anyone saw this before? I am using openser1.3.2. Thanks, -Joy

3 12

[Serusers] Error loading "trusted" table (permissions.so)
by caio 05 Feb '09

05 Feb '09

Hello all, Does anyone knows about this "permission.so" module error when try to load "trusted" table (mysql)? If "trusted" table is empty, there is no error, but whan at least there is 1 record, the error appears. for example: mysql> select * from trusted; +---------------+-------+--------------+ | src_ip | proto | from_pattern | +---------------+-------+--------------+ | 10.124.35.253 | any | ^sip:.*$ | +---------------+-------+--------------+ and when I try lo restart ser: Jan 15 15:34:45 delcolimba /usr/local/sbin/ser[703]: [ID 966737 daemon.info] permissions - initializing Jan 15 15:34:45 delcolimba /usr/local/sbin/ser[703]: [ID 414293 daemon.warning] Default allow file (/usr/local/etc/ser/permissions.allow) not found => empty rule set Jan 15 15:34:45 delcolimba /usr/local/sbin/ser[703]: [ID 844440 daemon.warning] Default deny file (/usr/local/etc/ser/permissions.deny) not found => empty rule set Jan 15 15:34:45 delcolimba /usr/local/sbin/ser[703]: [ID 895822 daemon.error] ERROR: permissions: trusted_reload(): Database problem Jan 15 15:34:45 delcolimba /usr/local/sbin/ser[703]: [ID 650101 daemon.crit] init_trusted(): Reload of trusted table failed Jan 15 15:34:45 delcolimba /usr/local/sbin/ser[703]: [ID 345573 daemon.error] Error while initializing allow_trusted function Jan 15 15:34:45 delcolimba /usr/local/sbin/ser[703]: [ID 660978 daemon.error] init_mod(): Error while initializing module permissions or when executing serctl fifo cmd: root@delcolimba /usr/local # sbin/serctl fifo trusted_dump 200 OK root@delcolimba /usr/local # sbin/serctl fifo trusted_reload 400 Trusted table reload failed root@delcolimba /usr/local # tail /var/adm/messages Jan 15 15:45:37 delcolimba /usr/local/sbin/ser[717]: [ID 895822 daemon.error] ERROR: permissions: trusted_reload(): Database problem Jan 15 15:45:37 delcolimba /usr/local/sbin/ser[717]: [ID 450600 daemon.error] ERROR: fifo_server: command (trusted_reload) processing failed Thank you, Caio

2 7

[Serusers] preload_udomain error
by caio 05 Feb '09

05 Feb '09

Hi all, Running ser0.9.7 on Solaris 10 (mysql 5.0.51 + serweb 0.9.6) Have this problem when I stop ser service, and then start it again (ser -E -D).. 0(0) preload_udomain: ERROR: bad callid record in table aliases 0(0) preload_udomain: ERROR: for username 579981, contact sip:579981@mydomain.com 0(0) preload_udomain: ERROR: skipping... And finally it dies with: 0(0) get_connection(): Connection not found in the pool Fallo de segmentaciÃ³n (core dumped) It happens with many records on aliases table and happens too with only one record: mysql> select * from aliases\G *************************** 1. row *************************** username: 579981 domain: 10.10.1.1 contact: sip:579981@mydomain.com received: NULL expires: 2009-02-05 11:45:21 q: 1.00 callid: The-Answer-To-The-Ultimate-Question-Of-Life-Universe-And-Everything cseq: 42 last_modified: 2009-02-05 11:45:46 replicate: 0 state: 0 flags: 128 user_agent: SIP Express Router FIFO 1 row in set (0.00 sec) SER start normally if I delete all the records on this table. But I need create the aliases again, and this is not the normal behaviour..I think. Here the description of aliases table: mysql> desc aliases; +---------------+---------------------+------+-----+---------------------+-------+ | Field | Type | Null | Key | Default | Extra | +---------------+---------------------+------+-----+---------------------+-------+ | username | varchar(64) | NO | PRI | | | | domain | varchar(128) | NO | PRI | | | | contact | varchar(255) | NO | PRI | | | | received | varchar(255) | YES | | NULL | | | expires | datetime | NO | | 2020-05-28 21:32:15 | | | q | float(10,2) | NO | | 1.00 | | | callid | varchar(255) | NO | | Default-Call-ID | | | cseq | int(11) | NO | | 42 | | | last_modified | timestamp | NO | | CURRENT_TIMESTAMP | | | replicate | int(10) unsigned | NO | | 0 | | | state | tinyint(1) unsigned | NO | | 0 | | | flags | int(11) | NO | | 0 | | | user_agent | varchar(50) | NO | | | | +---------------+---------------------+------+-----+---------------------+-------+ 13 rows in set (0.01 sec) Important: when "location" table keeps some records, ser doesn't start too: mysql> select * from location\G *************************** 1. row *************************** username: 579981 domain: mydomain.com contact: sip:579981@10.10.60.115:5060 received: NULL expires: 2009-02-05 11:46:16 q: -1.00 callid: 1f46c06d5e034425286f095b11cf4a1a(a)10.10.60.115 cseq: 6 last_modified: 2009-02-05 11:45:46 replicate: 0 state: 0 flags: 0 user_agent: CM5K-TA2S (807100.02) 1 row in set (0.00 sec) Here too I must to delete all the records to let SER start successfully. Does anyone knows about this issue? Regards, Claudio

1 1

[Serusers] configure SER and SEMS to work together
by Martin Lane 05 Feb '09

05 Feb '09

I am following the 'mini-Howto on how to configure SER and SEMS to work together' guide on iptel.org. So I have a separate directory for integrating the SER and SEMS functionality. For development purposes is there a switch to change the path were SER looks for the modules? As well control which version of SEMS is being used? I've installed Sip Express Media Server (1.1.0-rc1 (i386/linux)) as well as the version from the howto for testing. My basic problem is I currently get a version mismatch error: 0(9590) ERROR: module version mismatch for /usr/local/lib/ser/modules/sl.so; core: ser 0.9.6-sems (i386/linux); module: ser 0.9.6 (i386/linux) The appropriate modules are located in under my ser-sems test dir and I have not been successful in redirecting SER to look there. Also, I have modified ser.cfg and sems.cfg for my system but I did not find a default ser_sems.cfg. Is this file necessary and where is the default location? Thanks for any help or advice. mll

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users