sr-users June 2022

sr-users@lists.kamailio.org

53 participants
61 discussions

SIP trunk challange
by Mihai 10 Jun '22

10 Jun '22

Hello ! I have this issue with the telco provider they give the sip trunk on a private conection with private ips, the problem is that i am trying to relocate the sip trunk in remote server and I've tried though basic networking/tunnels/vpn and no go; their sbc is dropping requests and rejects if they are more via headers, they force me to use that conection and the ip allocated. The challenge is how to this is in kamailio, basically i just want to transport the trunk (similiar to a reverse proxy for web) to its new destination and from there handle everything. Any hints on how to achieve this?

2 1

Kamailio vs FreeSWITCH as SBC
by Unai Rodriguez 09 Jun '22

09 Jun '22

Dear List, I’m looking at using Kamailio as SBC. This would replace our current FreeSWITCH-based SBCs. What are your thoughts on this move? Would there be any known reasons why Kamailio would be superior to FreeSWITCH as an SBC? Thank you so much Unai Rodriguez

3 3

t_drop_replies can't be used on a route?
by David Villasmil 09 Jun '22

09 Jun '22

Hello guys, I have a failure route which calls another route, and on this route I need to t_drop_replies(); But i'm getting: [core/cfg.y:3510]: yyerror_at(): parse error in config file /etc/kamailio/include/relay_routes.cfg, line 143, column 20: Command cannot be used in the block Any way to fix this without me having to use it in the failure_route? Regards, David Villasmil email: david.villasmil.work(a)gmail.com phone: +34669448337

1 0

remove header in async processing (e.g. by http_async_client)
by Henning Westerholt 09 Jun '22

09 Jun '22

Hello, I'd like to remove headers during async processing e.g. in a route called from http_async_client(..). The usual textops functions are not working here. Adding headers could be done using something like rtjson, but it do not offer a remove header function. I could of course loop the request locally, but this is not that "nice". Any other suggestions for this case? Or just the rtjson module needs some extensions? Thank you, Henning -- Henning Westerholt - https://skalatan.de/blog/ Kamailio services - https://gilawa.com<https://gilawa.com/>

1 1

Siremis startup helper service for systemd
by Joseph Goettgens 09 Jun '22

09 Jun '22

Hi, I had some difficulties getting Siremis 5.3 to run under Debian 11 Bullseye. It turned out that the problem was the creation of the Siremis socket: <UnixSockLocal name="unixsocklocal" address="/run/siremis/siremis_rpc.sock" timeout="3.0"/> There is a warning in siremisJRCommands.xml that points out that systemd has to be reconfigured as sockets in /tmp are no longer shared (PrivateTmp setting). By the same token, /run/siremis/siremis_rpc.sock cannot be created as the httpd server is not allowed to write to /run, i.e. it can neither create the socket nor the siremis directory. The permanent creation of the siremis directory with suitable access rights is also not possible, since /run is mounted as tmpfs in the default configuration. At least the directory has to be created at boot time, which can be done with a small helper service. This is working for me (siremis-helper.service): [Unit] Description=Siremis Helper Service After=network.target [Service] Type=oneshot ExecStartPre=/usr/bin/mkdir /var/run/siremis ExecStart=/usr/bin/chown www-data:www-data /var/run/siremis [Install] WantedBy=multi-user.target It is enabled the usual way with systemctl "systemctl start --now siremis-helper". Siremis now works with jsonrpc commands and the procedure would mean that installing Siremis on a newer Debian system would definitely require some attention. Does anyone have any objections to the above procedure?

1 0

Re-establishment of a closed TCP connection
by Vitalii Krutsitskyi 09 Jun '22

09 Jun '22

Hello General overview of the infrastructure: Client (Cisco Hardware) ---> AWS NLB ---> Kamailio Instances The client has a time limit for the opened TCP connections - 10 minutes. This is a hardcoded value that can't not be changed. Regardless of the traffic that flows through the connection, it is closed after 10 minutes. Problem: in case of long-running calls above 10 minutes it is not possible for Kamailio to send back SIP traffic back to the client using the original TCP connection. The client has been asked to either increase the time limit or send SIP reinvites - none of that is possible due to some client's infrastructure limitations. Question: is it possible to force Kamailio to open a new TCP connection and associate it with the call? Client has a 5060 port always opened which can accept incoming connections.

3 2

ipops dns_query not working using Kemi
by Thomas de Rooij | CM.com 09 Jun '22

09 Jun '22

Hi all, We are trying to do a DNS query using Kemi: KSR.ipops.dns_query(domain, "xyz") The result is always -3. This is returned here: https://github.com/kamailio/kamailio/blob/5.5.4/src/modules/ipops/ipops_pv.… It seems weird to me that the error code is returned because the same non-Kemi code works just fine. Could it be related to this issue: https://github.com/kamailio/kamailio/issues/2052 Thanks. Kind regards, Thomas

3 2

remove headers with less than 5 characters with textops
by Patrick Karton 07 Jun '22

07 Jun '22

Hello im trying to textops module to remove headers with name length less than 5 characters with regular expression but it seems impossible or the module does not handle $ char remove_hf_re("^.{1,5}$")

3 3

Siremis JSONRPC problem on Bullseye
by Joseph Goettgens 07 Jun '22

07 Jun '22

Hi, I seem to have a problem setting up Siremis 5.3 on a Debian 11 box using the Kamailio 5.6.0 release (installed from repo). When I enter something like core.uptime into the JSONRPC Command Panel, I get a "System Internal Error" alert. The Apache error log then says: [Mon Jun 06 10:48:41.459377 2022] [php7:notice] [pid 22322] [client 192.168.xxx.xxx:45030] socket bind failed: No such file or directory, referer: http://deb11srv1-kamailio/siremis/sipadmin/jrcmds The path siremis/sipadmin/jrcmds obviously does not seem to exist and I assume that one needs some internal adjustments for some paths. As far as the socket is concerned, siremis/modules/sipadmin/service/siremisJRCommands.xml has the definition: UnixSockRemote name="unixsockremote" address="/var/run/kamailio/kamailio_rpc.sock" timeout="3.0"/> and the corresponding definition in /etc/kamailio/kamailio.cfg is: modparam("jsonrpcs", "dgram_socket", "/var/run/kamailio/kamailio_rpc.sock") modparam("jsonrpcs", "dgram_mode", 0666) which looks fine to me. I also checked for the existence of the socket and its access rights. Any suggestions?

2 1

t_cancel_callid - doesn't insert Reason header, if called from branch 0
by Pavel Veselovsky 07 Jun '22

07 Jun '22

Hallo all, I defined branch_failure routing block via t_on_branch_failure() In the branch_failure route, in case of "408 Request timeout" I am sending CANCEL with reason "t_cancel_callid("$ci", "$cs", "22", "408")". If the t_cancel_callid("$ci", "$cs", "22", "408") is called in branch_failure for branch idx 0, the CANCEL is sent, but Reason header is missing there. Why? (I expect that t_cancel_callid() should insert Reason header regardless of branch it is called from) If the t_cancel_callid is called in branch idx !=0, the CANCEL contains Reason header with cause as expected. Thanks for clarification of this behavior, Pavel. P.S. code snipset: event_route[tm:branch-failure:primary] { if ($T(reply_code) == "408") { if ($avp(branch_idx) == $T_branch_idx) { if (t_cancel_callid("$ci", "$cs", "22", "408")) { xlog("L_INFO", "CANCEL sent ci:$ci, cs:$cs 408"); } else { xlog("L_INFO", "CANCEL not sent ... ci:$ci, cs:$cs 408"); } $var(_palotmp_) = "sip:" + $avp(replaced_cfnry_target_number) + "@" + $dd + ":" + $dp + ";user=phone"; append_branch($var(_palotmp_),"1.0"); t_relay(); return; } } }

3 3

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users June 2022