sr-users June 2022

sr-users@lists.kamailio.org

53 participants
61 discussions

Siremis JSONRPC problem on Bullseye
by Joseph Goettgens 12 Sep '22

12 Sep '22

I am not sure what I have to look for and I didn't change the initial config files (except for the 666 mode for kamailio_rpc.sock). As far as Kamailio is concerned the socket files files do exist: root@deb11srv1-kamailio:/var/www/siremis-5.3.x# ls -l /run/kamailio/ insgesamt 4 srw------- 1 kamailio kamailio 0 7. Jun 11:37 kamailio_ctl -rw-r--r-- 1 kamailio kamailio 5 7. Jun 11:37 kamailio.pid prw-rw---- 1 kamailio kamailio 0 7. Jun 11:37 kamailio_rpc.fifo srw-rw-rw- 1 kamailio kamailio 0 7. Jun 11:37 kamailio_rpc.sock When I look at siremis/log/ERR.log I repeatedly get: '06/07/2022','09:43:29','ERR','ErrorHandler','socket_bind(): unable to bind address [2]: No such file or directory','' This disappears when I put the local file socket in /tmp: <UnixSockLocal name="unixsocklocal" address="/tmp/siremis_rpc.sock" timeout="3.0"/> which was probably done this way in previous versions of Siremis (before systemd private tmp config). In this case I get no error messages, but still no answers (as expected). The next step seems to get UnixSockLocal right.

2 1

Kamailio behind NAT
by Алексей Якимкин 29 Jul '22

29 Jul '22

Hello, I have kamailio in local network behind NAT. Kamailio have one interface eth1 with ip 10.130.0.23 UserAgent - (internet) - (178.0.0.169)router_with_NAT - (LAN) - kamailio+rtpproxy - pbx I made two listeners: listen=udp:10.130.0.23:5070 #to pbx in lan (I don`t want to put via header with 178.0.0.169) listen=udp:10.130.0.23:5060 advertise 178.0.0.169:5060 #to internet (UserAgent need to get via header with 178.0.0.169 ) mhomed = 1 # I think It not useful for my case UserAgent send Register and Invite to 178.0.0.169:5060, Kamailio get it on udp:10.130.0.23:5060 Kamailio Relay it to udp:10.130.0.23:5070 My pbx get requests from udp:10.130.0.23:5070 with via header 10.130.0.23 Responses to UserAgent go from udp:10.130.0.23:5060 with via 178.0.0.169 In RELAY block: if ($Ru == «udp:10.130.0.23:5070») { #set_send_socket(«udp:10.130.0.23:5060»); $fs = «udp:10.130.0.23:5060»; #force_send_socket(«udp:10.130.0.23:5060»); } else { #set_send_socket(«udp:10.130.0.23:5070»); $fs = «udp:10.130.0.23:5070»; } #$fs = «udp:10.130.0.23:5070»; if (!t_relay()) { sl_reply_error(); } route[REGISTRAR] { if ($rd == "mydomain.ru" || $rd == "mydomain2.ru") { set_send_socket("udp:10.130.0.23:5070"); } } It works for requests from UserAgent to PBX. But INVITE from my pbx to UserAgent goes only through udp:10.130.0.23:5070 , Kamailio realy it to internet from udp:10.130.0.23:5070 I get error in syslog: (pv [pv_branch.c:62]: pv_get_branchx_helper(): error accessing branch [0]) I tried set_send_socket(«udp:10.130.0.23:5070»); and $fs = «udp:10.130.0.23:5070»; Why I can`t relay outgoing requests to internet through another socket? -- Best regards, Alex

3 6

ACC CDR accounting
by Oleg Podguyko 27 Jul '22

27 Jul '22

HI I’m trying to get CDR function. I would like to have one CDR for whole call at the syslog. I use: …… loadmodule "db_text.so" loadmodule "dialog.so" loadmodule "acc.so" …….. # -----Dialog module ----- modparam("dialog", "db_mode", 0) # -----ACCounting module ----- modparam("acc", "early_media", 0) modparam("acc", "report_cancels", 1) modparam("acc", "log_facility", "LOG_LOCAL1") modparam("acc", "detect_direction", 0) modparam("acc", "log_level", ACC_LOG_LEVEL) modparam("acc", "log_flag", FLAG_ACC_LOG) modparam("acc", "log_missed_flag", FLAG_ACC_LOG_MISSED) modparam("acc", "failed_transaction_flag", FLAG_ACC_LOG_FAILED) modparam("acc", "log_extra", "ip_src=$si;ip_dst=$avp(ip_dst);sip_from=$fU;sip_to=$tU;ruri_user=$rU;spx_rs=$avp(spx_http_rs)") ## TODO modparam("acc", "cdr_enable", 1) modparam("acc", "cdr_enable_log", 1) modparam("acc", "cdr_facility", "LOG_LOCAL1") request_route { if (is_method("INVITE")) { setflag(FLAG_ACC_LOG); setflag(FLAG_ACC_LOG_MISSED); setflag(FLAG_ACC_LOG_FAILED); } At the kamailio.log I see only transaction for INVITE, but I wait for some CDR for all dialog. Whats wrong in my config? -- -- Олег Подгуйко

3 9

Releasing v5.6.1
by Daniel-Constantin Mierla 14 Jul '22

14 Jul '22

Hello, I am considering to release Kamailio v5.6.1 (out of branch 5.6) on Wednesday, July 6, 2022 -- in about 1 week and a half from now. If anyone is aware of issues not yet on the bug tracker, report them there asap in order to have a better chance to be fixed. Cheers, Daniel -- Daniel-Constantin Mierla -- www.asipto.com www.twitter.com/miconda -- www.linkedin.com/in/miconda Kamailio Advanced Training - Online: June 20-23, 2022 * https://www.asipto.com/sw/kamailio-advanced-training-online/

5 6

(Off-topic) Vienna, meeting
by Henning Westerholt 09 Jul '22

09 Jul '22

(Off-topic) Hello, In about two weeks I will be a few days in Vienna (12h - 14th July). If you want to meet for a drink to chat about Kamailio and other topics, just contact me off-list. Thanks, and regards, Henning

1 1

Kamailio 5.5 STIR SHAKEN private key buffer size error
by Maharaja Azhagiah 05 Jul '22

05 Jul '22

Hi, I am trying STIR/SHAKEN using libstirshaken in Kamailio 5.5. I used a self signed certificate as this is just a test in the local docker environment. However, when I try to add identity with private key (stirshaken_add_identity_with_key), I get "[error_code: 447] Buffer for key from file /tmp/cert/private.pem too short (2000 <= 3247)" I have tried using 2048 and 4096 size root@5907e44bd056:/tmp/cert# openssl rsa -in private.pem -text -noout | grep "Private-Key" RSA Private-Key: (4096 bit, 2 primes) Could you tell me what is wrong with the certificate? Kamailio version: root@5907e44bd056:/usr/local/kamailio/etc/kamailio# kamailio -v version: kamailio 5.5.4 (x86_64/linux) 469465 Error: 0(404) ERROR: {1 30587 INVITE NzIhM1-2YABveZZ1mPvs3m3tw8K7meSq} stirshaken [stirshaken_mod.c:761]: ki_stirshaken_add_identity_with_key(): Failed to load private key 0(404) DEBUG: {1 30587 INVITE NzIhM1-2YABveZZ1mPvs3m3tw8K7meSq} stirshaken [stirshaken_mod.c:117]: stirshaken_print_error_details(): failure details: 0(404) DEBUG: {1 30587 INVITE NzIhM1-2YABveZZ1mPvs3m3tw8K7meSq} stirshaken [stirshaken_mod.c:118]: stirshaken_print_error_details(): failure reason is: src/stir_shaken_ssl.c:2112: [error_code: 447] Buffer for key from file /tmp/cert/private.pem too short (2000 <= 3247) 0(404) DEBUG: {1 30587 INVITE NzIhM1-2YABveZZ1mPvs3m3tw8K7meSq} stirshaken [stirshaken_mod.c:119]: stirshaken_print_error_details(): failure error code is: 447 0(404) ERROR: {1 30587 INVITE NzIhM1-2YABveZZ1mPvs3m3tw8K7meSq} <script>: Failed Regards *Maharaja Azhagiah*

3 6

Run PCSCF without IPSec
by Weiqi Yao 30 Jun '22

30 Jun '22

Hello Community, We are running Kamailio with 3 instances as PCSCF/ICSCF/SCSCF, and we don't want IPsec to be used in between PCSCF and UE and we confirmed the initial Register UE send do not have the Security-Client header. However, seems the IPsec is enabled by default in current PCSCF cfg, we tried to comment WITH_IPSEC as well as couple ipsec_forward function out in the cfg, but when the 401 Challenging message send to PCSCF and PCSCF failed to forward it to UE due to (Create ipsec failed) reason. So I want to reach out and see if anyone have experience not using IPsec with currently Kamailio PCSCF? Any clue or comment will be appreciated! BR, Weiqi

1 0

Makefile.rules:191: recipe for target 'tlsa.so' failed
by Abdoul Osséni 30 Jun '22

30 Jun '22

Hello, Cannot compile tlsa module. I get the following error message: LD (gcc) [M tlsa.so] tlsa.so /usr/bin/ld: /usr/lib/gcc/x86_64-linux-gnu/4.9/../../../x86_64-linux-gnu/libssl.a(ssl_lib.o): relocation R_X86_64_32 against `.rodata.str1.1' can not be used when making a shared object; recompile with -fPIC /usr/lib/gcc/x86_64-linux-gnu/4.9/../../../x86_64-linux-gnu/libssl.a: error adding symbols: Bad value collect2: error: ld returned 1 exit status ../../Makefile.rules:191: recipe for target 'tlsa.so' failed make[2]: *** [tlsa.so] Error 1 Makefile:511: recipe for target 'modules' failed make[1]: *** [modules] Error 1 make[1]: Leaving directory '/usr/local/src/kamailio-5.6/kamailio/src' Makefile:34: recipe for target 'all' failed make: *** [all] Error 2 Please find below some information about my environment system: root@sbc:/usr/local/src/kamailio-5.6/kamailio# cat /etc/debian_version 8.6 root@sbc:/usr/local/src/kamailio-5.6/kamailio# openssl version OpenSSL 3.0.4 21 Jun 2022 (Library: OpenSSL 3.0.4 21 Jun 2022) Regards Abdoul

2 1

Install Kamailio in captive network
by Rahul mm 30 Jun '22

30 Jun '22

Hello guys, Ab initio, I'm loving Kamailio and the endless horizons it opens-up. Is there any document somewhere to get Kamailio installed in a captive network that runs w/o internet? I know this seems bizarre but in the mining industry most of the locations do not have internet facilities but they still want to use VoIP. I do not have the privilege to pull a blade system and put it on the internet to install Kamailio, FS etc. Any suggestions? -- Warm Regds. MathuRahul

4 5

Forward reply in onreply_route
by Carsten Bock 29 Jun '22

29 Jun '22

Hi, Question: Is there a way to forward a reply from the reply route and do other stuff afterward? We are currently doing operations on a 183 reply and it would be useful if we could forward the reply before continuing to process other stuff. High-Level example: *route { t_on_reply("REPLY"); t_relay();}onreply_route[REPLY] { // Forward the reply to the Caller t_relay(); // Does not work, as t_relay is only allowed in request and failure-routes // Do other fancy stuff, e.g. a DB Update or anything else}* Any ideas? Thanks, Carsten -- Carsten Bock I CTO & Founder ng-voice GmbH Trostbrücke 1 I 20457 Hamburg I Germany T +49 179 2021244 I www.ng-voice.com Registry Office at Local Court Hamburg, HRB 120189 Managing Directors: Dr. David Bachmann, Carsten Bock

6 5

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users June 2022