sr-users October 2021

sr-users@lists.kamailio.org

65 participants
59 discussions

upgrade kamailio 4.4.x-to-5.0.0 - PostgreSQL migrations

by Giovanni Tommasini - timenet srl

Hi Dears, I'm working on upgrading Kamailio from 4.4.6 to 5.4.0 in an installation where I use PostgreSQL I understand that I have to upgrade in steps by following these links: - http://www.kamailio.org/wiki/install/upgrade/4.4.x-to-5.0.0 - http://www.kamailio.org/wiki/install/upgrade/5.0.x-to-5.1.0 - https://www.kamailio.org/wiki/install/upgrade/5.1.x-to-5.2.0 - https://www.kamailio.org/wiki/install/upgrade/5.2.x-to-5.3.0 - https://www.kamailio.org/wiki/install/upgrade/5.3.x-to-5.4.0 in most of these links, in the section "Database", I find only the subsection "MySQL Database Structure", but I don't find the indications for DB migrations for PostgreSQL Database. Only here https://www.kamailio.org/wiki/install/upgrade/5.2.x-to-5.3.0 I found both the subsection "MySQL Database Structure" and "PostgreSQL Database Structure". What does this mean? - that I'm getting lost in a glass of water? - or that I don't have to make any changes to PostgreSQL? - or that the queries to be launched on PostgreSQL are the same as those for MySQL? I would discard this hypothesis - or that the wiki sections for PostgreSQL are missing? If this were the case, I could proceed with the update and then share the queries I launched to update the wiki. thanks a lot Giovanni Tommasini

3 years

Critical log when $mbu pseudovariable is accessed

by Alberto Izquierdo

Hi, I'm getting some CRITICAL logs when accessing the content of the $mbu pseudovariable in a "onsend_route" function. The log lines look like this: ``` CRITICAL core 35847:core/msg_translator.c:493 null send socket CRITICAL core 35847:core/msg_translator.c:893 FIXME: null send_sock CRITICAL core 35847:core/msg_translator.c:493 null send socket CRITICAL core 35847:core/msg_translator.c:493 null send socket CRITICAL core 35847:core/msg_translator.c:493 null send socket CRITICAL core 35847:core/msg_translator.c:493 null send socket CRITICAL core 35847:core/msg_translator.c:1479 FIXME: null bind_address CRITICAL core 35847:core/msg_translator.c:493 null send socket CRITICAL core 35847:core/msg_translator.c:493 null send socket CRITICAL core 35847:core/msg_translator.c:493 null send socket ``` I've checked the msg_translator.c source file and there are many of `LM_CRIT("FIXME: {message}\n");` calls, and I wonder if the "FIXME" tag relates to the location of the error: a Kamailio error or there is an issue in the user code. Could I have more information about the "FIXME" tag? Thanks in advance!

3 years

rtpengine module dependencies

by Juha Heinanen

rtpengine module README tells this about module dependencies: 3.1. Kamailio Modules The following modules must be loaded before this module: tm module - (optional) if you want to have rtpengine_manage() fully functional Looks like this is not correct. If Kamailio connects to rtpengine over websocket protocol, then there is dependency on lwsc module. I haven't checked if lwsc module works without tls module when wss is used. -- Juha

3 years

Kamailio Inbound proxy to Asterisk - ACL Filtering

by Mihai

Hello, I have an issue with filtering on the asterisk side, my requests are: UsersPhones(bria) -> Kamailio -> Asterisk -> Sip Trunk Out. The goal is to manage a new layer of protection ( IP filtering / Whitelisting ). When I try to compile a list of Whitelisted IP in sip.conf I get this error: NOTICE[205]: acl.c:748 ast_apply_acl: SIP contact ACL: Rejecting '145.72.23.45' due to a failure to pass ACL '(BASELINE)' WARNING[205]: chan_sip.c:17061 parse_register_contact: Domain '5.12.16.2:48669' disallowed by contact ACL (violating IP 145.72.23.45) WARNING[205]: chan_sip.c:17933 register_verify: Registration denied because of contact ACL The IP 145.72.23.45, is the proxy kamailio and if I added it to sip.conf it works, but so does every ip afterwards. I tried with contactpermit also with permit, the result is the same as long as I permit the proxy ip it works. Is there something that I can do on the asterisk side to activate this filtering Or there is something that I can do in Kamailio so it will forward the realip ? contactdeny=0.0.0.0/0.0.0.0 contactpermit=145.72.23.45/32 contactpermit=5.12.16.2/32 Thanks in advance,

3 years

Nagios NRPE Plugin for Kamailio 5.x

by Angelo Sipper

Hi, I would like to monitor kamailio via our nagios. Is there any working plugin available for nagios nrpe to monitor shared memory and some other config variables for kamailio 5.x that someone has used and could suggest? Kind regards, Angelo

3 years

update max_while_loops in config

by Juha Heinanen

It is possible to update value of max_while_loops dynamically in config file? For example, there could be a need to increase the max in some while loop, but after the loop is done, decrease it again for other loops. There exists an rpc command to do that, but I haven't found how to do it in config file. I tried @cfg_seti.core.max_while_loops = 200; but got syntax error. -- Juha

3 years

Suspend INVITE between ip4 and ip6 users

by Péter Barabás

Hi, I try to modify the kamailio configuration to work between ipv4 and ipv6 clients. Clients are mobile sofphones, so they are mostly in background without registration. 1. When an INVITE arrives from IPV4 address, transaction is suspended and a push notification is sent to callee. 2. Callee gets push notification and registers to kamailio. 3. INVITE transaction continues. My kamailio config is based on this article: https://kb.asipto.com/kamailio:kamailio-mixed-ipv4-ipv6 using rtpengine. If clients are in foreground it works fine. But, when a client is in background, kamailio knows nothing about the callee’s IP address (ipv4 or ipv6). The problematic case is the call from IPV4 to IPV6. In this case the FLB_V4V6 flag is missing at continue, since in IPV4V6 route it cannot be set and the rtpengine tries the IPV4->IPV4 case. From the other side IPV6->IPV6. It is understandable, since FLB_V4V6 flag is missing in this case. My question is: where and when should I set this flag? Thanks. Peter

3 years

Missing line in line.count transformation

by Daniel Donoghue

I think I’ve found an edge case with the string transformations for line.count: In pv_trans.c, the following code does not appear to consider the last line if there are multiple lines and the last one is not terminated with \n. case TR_LINE_COUNT: n=0; for(i=0; i<val->rs.len; i++) if(val->rs.s[i]=='\n') n++; if(n==0 && val->rs.len>0) n = 1; val->flags = PV_TYPE_INT|PV_VAL_INT|PV_VAL_STR; val->ri = n; val->rs.s = int2str(val->ri, &val->rs.len); break; This means that my count is always one off unless I force a blank line at the end of my string. Also, this code does not cater for cases where there is a different line terminator, such as CR or CRLF as is the case when the string comes from a Mac or windows system, respectively; it might be useful to have a transformation for doing that as I’ve had to hack it using s.replace with hexadecimal escape codes (\r and \n do not work) in a variable. With every blessing, — Daniel Donoghue

3 years

Parsing Error in Timer Module of kamailio

by Surabhi Garg

Hi Team, Greetings! I am trying to use Timer Module of Kamailio to keep calling particular route at particular time interval. Here is the snippet of my config: loadmodule "timer.so" modparam("timer", "declare_timer", "MYTIMER=SHUTDOWN,5000,slow,enable"); route[SHUTDOWN] { xlog("system shutdown: $sht(graceful_shutdown=>shutdown)\n"); } But after restarting the Kamailio, I keep on getting parsing errors in every 5 sec and my route "SHUTDOWN" never get called. Which means timer is getting called in every 5 sec but not able to call the route. Could you please help me with this why these parsing errors coming? am I missing some arguments here? Kamailio Version: 5.5.X. Errors: Sep 23 15:29:31 N1VL-PA-SIP01 /usr/local/kamailio-5.5/sbin/kamailio[9907]: ERROR: <core> [core/parser/msg_parser.c:748]: parse_msg(): ERROR: parse_msg: message=<GET /timer HTTP/0.9#012#012> Sep 23 15:29:31 N1VL-PA-SIP01 /usr/local/kamailio-5.5/sbin/kamailio[9907]: ERROR: timer [timer.c:204]: timer_handler(): parse msg failed Sep 23 15:29:36 N1VL-PA-SIP01 /usr/local/kamailio-5.5/sbin/kamailio[9907]: ERROR: <core> [core/parser/msg_parser.c:748]: parse_msg(): ERROR: parse_msg: message=<GET /timer HTTP/0.9#012#012> Sep 23 15:29:36 N1VL-PA-SIP01 /usr/local/kamailio-5.5/sbin/kamailio[9907]: ERROR: timer [timer.c:204]: timer_handler(): parse msg failed Also, in place of timer module I tried using rtimer module as well which is also giving me similar results as per my requirement. But Could you please help me with the pros and cons of both the modules timer and rtimer. Any thoughts on this would be appreciated Surabhi Garg Mobile - 91 783 888 7523

3 years

[kamailio/kamailio] SIP Preconditions Settings?

by Luis Joel Borrego Soto

Hi Team, According with the RFC3312 (https://datatracker.ietf.org/doc/html/rfc3312) The SDP parameters are the following We define the following media level SDP attributes: current-status = "a=curr:" precondition-type SP status-type SP direction-tag desired-status = "a=des:" precondition-type SP strength-tag SP status-type SP direction-tag confirm-status = "a=conf:" precondition-type SP status-type SP direction-tag **precondition-type = "qos" | token strength-tag = ("mandatory" | "optional" | "none" = | "failure" | "unknown")** status-type = ("e2e" | "local" | "remote") direction-tag = ("none" | "send" | "recv" | "sendrecv") Which one should be the equivalent in the Kamailio?, is the a specific module? Br, Joel Borrego (joel.borrego)

3 years

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users October 2021