sr-users October 2021

sr-users@lists.kamailio.org

65 participants
60 discussions

Use constants in attrs column of the dispatcher module
by Markus Bönke 27 Oct '21

27 Oct '21

Hello all, I’ve a question regarding the dispatcher module. So far we use on every server a separate database table, where the attribute column is set to the local internal or external socket like "socket=udp:192.168.1.70:5060“ or socket=udp:80.239.xxx.xxx:5060. Is there a way to use constants here like socket=udp:IPADDR_INTERN:5060 or socket=udp:IPADDR_EXTERN:5060 which are replaced when the data is loaded from the DB? Thanks and regards Markus

3 4

No "child_destroy" export ?
by Chaigneau, Nicolas 26 Oct '21

26 Oct '21

Hello, I have a module, for which I need to perform some processing in the children processes when Kamailio is being stopped. I've looked at the "struct module_export", in which I see "mod_init", "child_init", "mod_destroy"... but no "child_destroy". :/ Is there a way to achieve this ? Thanks for your help. Regards, Nicolas. This message contains information that may be privileged or confidential and is the property of the Capgemini Group. It is intended only for the person to whom it is addressed. If you are not the intended recipient, you are not authorized to read, print, retain, copy, disseminate, distribute, or use this message or any part thereof. If you receive this message in error, please notify the sender immediately and delete all copies of this message.

2 1

Kamailio/Asterisk Realtime issues
by Hayden Ryan 26 Oct '21

26 Oct '21

Hi all, I have Kamailio and Asterisk set up in a realtime configuration, like this: https://kb.asipto.com/asterisk:realtime:kamailio-4.0.x-asterisk-11.3.0-astdb In my setup, Kamailio forwards all REGISTER requests to Asterisk, and Asterisk authenticates them. I have a single peer in sip.conf pointing towards the Kamailio server, as type=peer Each user in the Asterisk database is set to type=user, as when they are set to anything else (or blank), incoming calls from Kamailio to Asterisk display the name of the most recent extension to register. Is there something wrong with my setup here? What I am trying to do is to get MWI working. SUBSCRIBEs for MWI are forwarded to and handled by Asterisk correctly. Yet the MWI state on the handset is incorrect, as I believe it is sending the latest MWI update to the most recently registered extension. Any suggestions would be much appreciated. I assume I'm doing this the wrong way and shouldn't be forwarding any REGISTERs to Asterisk and should be handling authentication in Kamailio itself? But that seems incompatible with the realtime configuration guides I've seen. Thank you, Hayden

2 1

Please reivew the issue about diameter_request_async
by BOEINGNG 26 Oct '21

26 Oct '21

Hello! Please review the issue I mentioned here:https://github.com/kamailio/kamailio/issues/2900 <https://github.com/kamailio/kamailio/issues/2900> Could you provide some advice to me? Regrads HANG LI

1 0

Info: risk of failure by upgrading to MariaDB 10.3.31
by Daniel-Constantin Mierla 25 Oct '21

25 Oct '21

Hello, not strictly related to Kamailio, but I know a large number of its deployments run with MariaDB. Be aware of a (pretty high) risk of failure after upgrading MariaDB server to v10.3.31, which comes now on Debian 10 via the usual apt update+upgrade. I was hit on one the servers I upgraded recently, first one worked fine, the 2nd failed to start MariaDB service after upgrade - there is a bug report about it: * https://www.mail-archive.com/debian-bugs-dist@lists.debian.org/msg1823336.h… Downgrading MariaDB seems to be the right solution for now, specially if you didn't do a backup just before upgrade. Don't try other tricks without a fresh backup, data files can be damaged. If you have a fresh backup, there seems to be a solution by deleting database files to start with a clean set and then restore from backup with sql statements. FreeBSD has a similar bug report, so doesn't seem to be only Debian, could be other Linux distros as well. Even with fresh backups, plan for a longer maintenance time frame than usual. Cheers, Daniel -- Daniel-Constantin Mierla -- www.asipto.com www.twitter.com/miconda -- www.linkedin.com/in/miconda Kamailio Advanced Training - Online Nov 08-11, 2021 (Europe Timezone) - Nov 22-25, 2021 (America Timezone) * https://www.asipto.com/sw/kamailio-advanced-training-online/

1 0

T_req(pv) not accessible in dialog event route in v5.5.2
by Joel Serrano 23 Oct '21

23 Oct '21

Hello, I'm in the process of updating some servers that are running Kam v5.1.4 to v5.5.2. After the upgrade I've noticed that I've lost some custom metrics that we have defined via config-script. Snippet of the relevant config: event_route[dialog:start] { # Gather metrics regarding source IP xlog("L_WARN", "[DLG] - Checking country for ($si | $T_req($si)) - START\n"); if (geoip2_match("$T_req($si)", "src")) { # Country found ... } xlog("L_WARN", "[DLG] - Checking country for ($si | $T_req($si)) - END\n"); } NOTE: xlog lines added for debugging, they normally are not there. In version 5.1.4 in the logs I see: Oct 21 15:55:47 13cn3 sbc[22606]: WARNING: <script>: [DLG] - Checking country for (A.B.C.D | 186.185.186.7) - START Oct 21 15:55:47 13cn3 sbc[22606]: WARNING: <script>: [DLG] - Checking country for (A.B.C.D | 186.185.186.7) - END The same config, on v5.5.2 is returning: Oct 21 15:57:08 sbc0504 sbc[22606]: WARNING: <script>: [DLG] - Checking country for (A.B.C.D | <null>) - START Oct 21 15:57:08 sbc0504 sbc[22606]: WARNING: <script>: [DLG] - Checking country for (A.B.C.D | <null>) - END After enabling debug logs I see: WARNING: <script>: [DLG] - Checking country for (198.1.55.124 | <null>) - START *DEBUG: tmx [t_var.c:309]: pv_get_t_var_req(): used in unsupported route block - type 64*DEBUG: geoip2 [geoip2_pv.c:488]: geoip2_update_pv(): attempt to match: <null> DEBUG: geoip2 [geoip2_pv.c:491]: geoip2_update_pv(): no match for: <null> Did something change in the tmx module that could affect $T_req(pv) being accessible in the dialog:start event_route? Any alternatives to get the source IP of the request (not the reply) in the dialog:start event_route? Let me know if you prefer that I open a ticket for this in GH. Thanks, Joel.

2 3

"EXTERN.h: No such file or directory" error when compiling Kamailio 5.5 on Centos 7
by AL RSM 22 Oct '21

22 Oct '21

Hi, While trying to install Kamailio 5.5 on Centos 7 I am getting the following error. Perl is already installed. I verified "EXTERN.h" does not exist on the VM. # make include_modules="tm app_perl" cfg # make prefix=/ all .... .... Can't locate ExtUtils/Embed.pm in @INC (@INC contains: /usr/local/lib64/perl5 /usr/local/share/perl5 /usr/lib64/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib64/perl5 /usr/share/perl5 .). BEGIN failed--compilation aborted. Can't locate ExtUtils/Embed.pm in @INC (@INC contains: /usr/local/lib64/perl5 /usr/local/share/perl5 /usr/lib64/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib64/perl5 /usr/share/perl5 .). BEGIN failed--compilation aborted. CC (gcc) [M app_perl.so] perlfunc.o In file included from perlfunc.c:40:0: app_perl_mod.h:37:20: fatal error: EXTERN.h: No such file or directory #include <EXTERN.h> ^ compilation terminated. make[2]: *** [perlfunc.o] Error 1 make[1]: *** [modules] Error 1 make[1]: Leaving directory `/usr/src/kamailio/src' Your help would be much appreciated. Thanks, AL

2 1

tls connections
by Richard Robson 20 Oct '21

20 Oct '21

I'm trying in vain to get a tls connection to a carrier. ~Without too much detail we are exchanging certificates and they are saying we are triggering a reset of the connection because we are requesting to chage the tcp window size. there are requiring us to have a window size of 65535. there we are sending a smaller window size. as far as I understand this should be OK. I have tried to force out linux install to set the window size to 65535 but we are still sing the smallerwindow in the tcp packet. Is there any settings in Kamailio that could force the window size? we are using Kamailio 5.4.2 Thanks in advance Richard

2 2

Catching websocket / TCP errors
by Marrold 20 Oct '21

20 Oct '21

Hi, We're currently implementing WebRTC (SIP over a websocket) on our Kamailio proxies and we're experiencing a minor issue after a restart. We write all USRLOC entries to a shared database to implement HA. These are then loaded on a restart, which leaves us with entries with TCP connections that no longer exist. When a call attempt is made the proxy can't find the connection ID and immediately rejects the call with a "500 No error (2/SL)" - Oct 5 15:38:24 proxy-01 /sbin/kamailio[32087]: WARNING: <core> [core/msg_translator.c:2861]: via_builder(): TCP/TLS connection (id: 0) for WebSocket could not be found Oct 5 15:38:24 proxy-01 /sbin/kamailio[32087]: ERROR: <core> [core/msg_translator.c:2038]: build_req_buf_from_sip_req(): could not create Via header Oct 5 15:38:24 proxy-01 /sbin/kamailio[32087]: ERROR: tm [t_fwd.c:479]: prepare_new_uac(): could not build request Oct 5 15:38:24 proxy-01 /sbin/kamailio[32087]: ERROR: tm [t_fwd.c:1759]: t_forward_nonack(): failure to add branches Oct 5 15:38:24 proxy-01 /sbin/kamailio[32087]: ERROR: sl [sl_funcs.c:414]: sl_reply_error(): stateless error reply used: No error (2/SL) How can we catch this error to avoid terminating the call prematurely? Or should we flush these TCP connections on start up? Thanks Matthew

2 5

Use constants in attrs column of the dispatcher module
by Markus Bönke 19 Oct '21

19 Oct '21

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users October 2021