Hello guys,
Is there any way to reload the address table in the cfg? I always need to
use "kamctl address reload"...
Regards,
David Villasmil
email: david.villasmil.work(a)gmail.com
phone: +34669448337
Hello,
Using Kamailio 5.1.6 for load balancing & failover,
I noticed that from time to time, and very rarely, the dispatcher module
stops dispatching to the Asterisk servers.
I have to execute a "kamcmd dispatcher reload" for it to (re)start working.
This is my dispatcher.list :
1 sip:10.19.XXX.YYY:5060 0 1 duid=sipgw01;maxload=100
1 sip:10.19.XXX.YYY:5060 0 2 duid=sipgw02;maxload=100
1 sip:10.19.XXX.YYY:5060 0 3 duid=sipgw03;maxload=100
1 sip:10.19.XXX.YYY:5060 0 4 duid=sipgw04;maxload=100
This is my dispatch routes:
# Dispatch requests
route[DISPATCH] {
if(!ds_select_dst("1", "10","4"))
{
xlog("L_INFO","no destination selected from dispatcher
list!");
send_reply("404", "No destination");
exit;
}
xlog("L_INFO","going to <$ru> via <$du>\n");
t_on_failure("RTF_DISPATCH");
route(RELAY);
exit;
}
# Sample failure route
failure_route[RTF_DISPATCH] {
if (t_is_canceled()) {
exit;
}
xlog("L_INFO", "Media server $du failed to answer, selecting other
one!");
# next DST - only for 500 or local timeout
if ( t_check_status("500") || (t_branch_timeout() &&
!t_branch_replied()) )
{
#mark the destination Inactive and Probing
ds_mark_dst("ip");
if(ds_next_dst())
{
t_on_failure("RTF_DISPATCH");
route(RELAY);
exit;
}
}
}
I suspect that the ds_mark_dst("ip") command in RTF_DISPACTH is the cause.
Is there any think I can improve on this? Or any know bug with the
dispatcher in Kamailio 5.1.6 version?
Thanks in advance,
*Sérgio Charrua*
Hi,
sorry for quite stupid and newbie questions, but I am out of ideas.
1. On one of my Debian 10 servers I am unable to stop logging kamailio
messages to /var/log/syslog. It is funny, because I have 3 more servers
where it works but on this one, it doesnt and no matter what I try it
still keeps sending logs to syslog (and to the file configured).
My related configs:
/etc/kamailio/kamailio.cfg
log_stderror=no
log_facility=LOG_LOCAL7
/etc/rsyslog.conf
local6.* /var/log/kamailio/cdr.log
local7.* /var/log/kamailio/kamailio.log
/etc/rsyslog.d/kamailio.conf
if $programname contains 'kamailio' then /var/log/kamailio/kamailio.log
& stop
/etc/systemd/system/multi-user.target.wants/kamailio.service
SyslogIdentifier=kamailio
2. It is probably related to 1. I am unable to get the CDRs logged to
anything else but /var/log/syslog. I tried database (nothing) and
setting cdr_facility and again nothing. It just keeps sending everything
to /var/log/syslog.
Related configs:
modparam("acc", "cdr_enable", 1)
modparam("acc", "cdrs_table", "acc_cdrs")
modparam("acc", "cdr_facility", "LOG_LOCAL6")
Example output in syslog file:
Sep 30 09:21:41 sip2 /usr/sbin/kamailio[1151]: NOTICE: {2 21 INVITE
ZPZI7Hqytw} acc [acc.c:279]: acc_log_request(): ACC: call missed:
timestamp=1601450501;method=INVITE;from_tag=1GH5hGQxN;to_tag=QwcYFet;call_id=ZPZI7Hqytw;code=486;reason=Busy
here;src_user=XXXXXXXXX;
Is there something trivial I am missing?
Thank you. Regards, Jan
Hello,
I try to perform a registration caching in order to have a short interval registration on phone <> Kamailio (5 minutes) and a longest interval on the leg Kamailio <> registrar(1h).
I’m not so sure about the best way to proceed, does one of you have a working sample or some hints about the way to have it working ?
Thanks in advance ,
David
Hello everyone,
Please, see this:
https://github.com/fredposner/scripts/blob/master/kamailio/kamailio-tls_srt….
I am researching to understand how this TLS-bridge configuration works
and have a main question about how passwords are handled in this
scenario. If the PBX in the equation requires password authentication,
when SIP clients connect to the Kamailio bridge with that username and
password, does Kamailio pass through the username and password to the PBX?
Many thanks,
Conrad
Hello,
I'm trying to periodically get all registered contacts from the Kamailio
memory in the json format.
JSONRPCS module have 3 different types of transport to get this data. I
just wonder what will be the safest transport for the Kamailio to get all
this data? Because all this data it's not so important, I want to gather it
without affecting the main process or with the minimal effect on the
Kamailio SIP Processing module.
1. The HTTP transport - very useful, working async, but because it depends
on the xhttp module - which works synchronously I'm afraid that for big
data with contacts this type of transport can affect the kamailio
performance.
2. FIFO - this transport also is very fast, working locally - but it's
synchronous, I'm not sure how it will affect Kamailio SIP Processing when
the local database will have few millions of users registered.
3. DGRAM - also seems to be very fast, working locally or remotely through
the UDP protocol, but again it's synchronous and I'm not sure that this
transport is returning any output for the request, I tried - but didn't get
back anything, while for changing something it worked fine. Maybe it was a
misconfiguration in my config file.
What would be your recommendation for this case?
Thank you.
Hello guys,
I'm receiving a Proxy-Authenticate header with a special parameter, call if
"myparam", something like:
Proxy-Authenticate: Digest realm="sip.mydomain.com", nonce="...",
algorithm=MD5, qop="auth", opaque="XXXX/YYYY"
I can get the parameter like so:
$var(myparam) = @proxy_authorization["sip.mydomain.com"].myparam;
And this is great!
But i need to replace part of the parameter "myparam"m and I can't figure
out how to do it...
Can anyone help me with this?
Thanks!,
David Villasmil
email: david.villasmil.work(a)gmail.com
phone: +34669448337
Hi all.
We want to manage users via dbaliases so that one subscriber can have
multiple aliases. We have an internal username in the subscriber table. We
authenticate with the internal username, the call goes through with the
internal username. Is there anyway to specify:
1. Caller-ID to be the actual email_address (added to subscriber table),
2. Authenticate with dbaliases?
Any other thoughts please? Appreciate the help.
Best wishes.
Hey,
I just upgrade to Kamailio 5.4 and i see that now sqlops has a limitation
of 32 results containers which is not enough for my proxy.
Is it possible that this limitation can be configured via module parameters?
In the meanwhile i've changed the value in sql_api.c but i would like to
have my source code as close as the original as possible.
Best Regards,
Duarte Rocha
Hi,
I am a newbie to sipclient Linphone. I know this issue is not related with
kamailio.Yet If anybody have tried it before , kindly provide me with some
links or procedures to be followed for call registration and connectivity
with kamailio since in my case, request is going but response is not coming
back resulting in timeout issue.
This happens only in linphone.If i do the samething in PJSIP/zoiper, call
registration and call establishment happens perfectly fine.
Kindly help.
Thanks,
Pavithra
