sr-users October 2020

sr-users@lists.kamailio.org

66 participants
85 discussions

To Header Manipulation
by Sam Ware 15 Oct '20

15 Oct '20

Wondering if this is intended behavior. We have a customer doing some craziness with the TO header. They are including their tech prefix in the TO header as well as the RURI. It doesn't cause any issue in our systems but apparently it does with one of our vendors. In an effect to prevent the issue, we thought we would check if the tech prefix was added on the TO header and remove it. Initially, I tried this by changing the $tU variable. $avp(tp_len) = $(avp(techprefix){s.len}) + 1; # Get the Length of the Tech Prefix and add 1 for the # or * $tU = $(tU{s.strip, $avp(tp_len)}); The result ended up with the duplication of the DNIS: sut <sip:911999# 1812555111118125551111@172.16.3.45:5060> Where 911999# was the tech prefix and 18125551111 is the DNIS which was still an issue for the vendor. Through additional reading, I found the suggestion to use the uac_replace_to function in the UAC module which I implemented as follows: $avp(new_to_hdr_uri) = $(tu{re.subst,/sip:(.*[\*#])(.*)/sip:\2/}); uac_replace_to("$avp(new_to_hdr_uri)"); This resulted in the original TO header username to be appended at the end of the uri: sut <sip:18125551111@172.16.3.45:5060911999#18125551111> Wondering if I am doing something wrong or this is the way these functions are designed to protect the TO header contents for Dialog matching. -- Sam D Ware

2 1

Error in RTP engine setup
by Pavithra Mohanraja 15 Oct '20

15 Oct '20

Hi, I tried to setup rtpengine to make my sip clients communicate through proxy following https://open5gs.org/open5gs/docs/tutorial/02-VoLTE-setup/ I started sip communication since the service was running and saw that the RTP packets go to exposed rtp interface instead of other sip client. But i don't receive packets from the other end. When analyzed I noticed the rtp-engine daemon gives a few errors. *modprobe: FATAL: Module xt_RTPENGINE not found in directory /lib/modules/4.15.0-118-generic* *iptables: No chain/target/match by that name.ip6tables: No chain/target/match by that name. * Starting RTP/media proxy ngcp-rtpengine-daemon [1602690253.130392] ERR: FAILED TO CREATE KERNEL TABLE 0 (No such file or directory), KERNEL FORWARDING DISABLED* *(Note: *uname -r gives 4.15.0-118-generic and /lib/modules/ has only 4.15.0-115-generic*)* Please help me with this issue. Thanks in Advance. Regards, Pavithra

2 2

Re: [SR-Users] Regd : SIP Configuration in Kamailio
by Henning Westerholt 14 Oct '20

14 Oct '20

Hello, please keep the list in CC. I can see Kamailio in your log: Oct 14 11:21:59 nickar /usr/sbin/kamailio[24567]: INFO: <core> [main.c:842]: sig_usr(): signal 15 received Oct 14 11:21:59 nickar systemd[1]: Stopping Kamailio (OpenSER) - the Open Source SIP Server... Oct 14 11:21:59 nickar /usr/sbin/kamailio[24568]: INFO: <core> [main.c:842]: sig_usr(): signal 15 received About tracing/debugging, one good option is sngrep. Cheers, Henning -- Henning Westerholt – https://skalatan.de/blog/ Kamailio services – https://gilawa.com<https://gilawa.com/> From: Santanu B <santanu.br(a)gmail.com> Sent: Wednesday, October 14, 2020 1:41 PM To: Henning Westerholt <hw(a)skalatan.de> Subject: Re: [SR-Users] Regd : SIP Configuration in Kamailio Hi, My syslog file is enclosed for your reference. Thanks, Santanu On Wed, Oct 14, 2020 at 1:07 PM Henning Westerholt <hw(a)skalatan.de<mailto:hw@skalatan.de>> wrote: Hello, have a look to /var/log/messages or /var/log/syslog, depending on the distribution. Kamailio might be logged there. Cheers, Henning -- Henning Westerholt – https://skalatan.de/blog/ Kamailio services – https://gilawa.com<https://gilawa.com/> From: sr-users <sr-users-bounces(a)lists.kamailio.org<mailto:sr-users-bounces@lists.kamailio.org>> On Behalf Of Santanu B Sent: Wednesday, October 14, 2020 7:09 AM To: Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org<mailto:sr-users@lists.kamailio.org>> Subject: Re: [SR-Users] Regd : SIP Configuration in Kamailio Dear David, In /var/log folder I am unable to see any kamailio log. Only syslog file is available. Please help me to find the Kamailio log. Also please guide me to find out the trace also as I am very new to SIP Server. Thanks a lot. Regards, Santanu On Tue, Oct 13, 2020 at 4:05 PM David Villasmil <david.villasmil.work(a)gmail.com<mailto:david.villasmil.work@gmail.com>> wrote: Hello, You will need to provide more information. What happens? What errors do you see in kamailio’s log? A trace would also be nice. On Tue, 13 Oct 2020 at 06:24, Santanu B <santanu.br(a)gmail.com<mailto:santanu.br@gmail.com>> wrote: Hi, We are using Jitsi Meet for Video Conference Service. We want our SIP endpoint to join in the conference room in Jitsi. For that i am trying to configure Kamailio SIP Server in our environment. I have installed the Server and my endpoints are registered in my SIP server. Both endpoints are able to connect to each other. But I am unable to configure the SIP endpoints to join in the Meet Conference Room. Please guide me to configure. Thanks and regards, Santanu _______________________________________________ Kamailio (SER) - Users Mailing List sr-users(a)lists.kamailio.org<mailto:sr-users@lists.kamailio.org> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users -- Regards, David Villasmil email: david.villasmil.work(a)gmail.com<mailto:david.villasmil.work@gmail.com> phone: +34669448337 _______________________________________________ Kamailio (SER) - Users Mailing List sr-users(a)lists.kamailio.org<mailto:sr-users@lists.kamailio.org> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

1 0

SRTP
by Andy Kama 14 Oct '20

14 Oct '20

Hi All, I have setup a tls connection to a sip provider and it works perfectly But they are requesting i send srtp i can find any documentation how i do it with rtpengine etc? any guidance would be appreciated

3 3

pstn_route add_route(): route name <IP> not defined error
by sai Sudheer 14 Oct '20

14 Oct '20

Hii,I am trying to use pstn_route module for the first time, and i want to route the invite to specific pstn server based on its prefix.I have loaded the module & setup the DB, and it's giving error saying route name (from DB) is not defined after adding the a prefix into DB table., and there were no errors when DB table is empty.Not sure how to defined it, or i dont know what did i miss. Please help. #### CONFIG ##########loadmodule "prefix_route.so"modparam("prefix_route", "db_url", "mysql://xxxxx:xxxxx@localhost/kamailioDB")modparam("prefix_route", "db_table", "new_prefix_route") #PSTN Routing table contains if (!prefix_route("+44")) { xlog("L_INFO", "+44 prefix didnt match with prefix_route DB\n"); } ########## DB####MariaDB [kamailio]> select * from new_prefix_route;Empty set (0.00 sec) MariaDB [kamailio]> exit;########## Kamailio looks good untill here, no errors.. # Now i have added a prefix into sql DBINSERT INTO new_prefix_route VALUES ("+44", "10.10.1.1:5060", "route for this prefix");###########Error log after adding a prefix into new_prefix_route table & restart of kamailio 0(5802) CRITICAL: prefix_route [prefix_route.c:72]: add_route(): route name '10.10.1.1:5060' is not defined 0(5802) NOTICE: prefix_route [prefix_route.c:170]: pr_db_load(): Total prefix routes loaded: 1 0(5802) ERROR: prefix_route [prefix_route.c:174]: pr_db_load(): error flushing tree 0(5802) CRITICAL: prefix_route [prefix_route.c:212]: mod_init(): db load failed I have tried a "name" instead of IP (though i dont know how to convert that "name" into a IP:Port), But i am still getting same error using "name" instead of IP:port @ route field in DB. Please help.

2 2

how to get a value from SIP INVITE Header
by sai sudheer 14 Oct '20

14 Oct '20

Hii Please help me to get the a value from SIP INVITE header reached to kamailio like INVITE sip:+341930203454@sub.domain.com;myid=+34@sub.domain.com SIP/2.0 and i want to save the myid value +34 into a variable, without the domain name. $var(uri) = $sel(ruri); xavp_params_explode("$(var(uri){s.unbracket})", "uri"); xlog("L_INFO", "$var(uri) Received converted to $xavp(uri=>myid[0])\n"); I tried above and it prints +34(a)sub.domain.com But i want to just save +34 into a variable to further check the prefix based routing from the database. 1) Could you please help how to get it or If there is any alternate/single line approach to get this value? 2) $var & $xavp are process-local variables, and they cant be shared with other calls? Right 3) What is the best module to route calls based their prefix ? pstn_route or dynamic routing or any suggestions? Please help, thanks in advance.

3 7

'302 Moved temporarily' contact parsing error
by David VILLAUME 14 Oct '20

14 Oct '20

Hello, I see parsing errors on 302 contact header that seems compliant to RFC : Contact:<sip:172.16.0.21:5060>;q=0.5,<sip:172.16.0.22:5060>;q=0.25 <core> [core/parser/parse_addr_spec.c:479]: parse_to_param(): invalid character ',' in status 27: [;q=0.5] Is there an error in my contact or is it truly a parsing error ? Regards, David

3 6

Wants to know kamailio supports IMS with SRVCC Handover or not
by Anwesh Babu 14 Oct '20

14 Oct '20

Hello Team, I am working for a telecom company and want to use Kamailio for my VoLTE testing. I had earlier used these tools for my VoLTE testing using a Polaris CNE. But i have a requirement to perform SRVCC Handover for CS/CS+PS. will Kamailio support the SRVCC Handover? If supported, can it be possible to share the details ? -- Best Regards, Anwesh Babu T

1 0

routing calls based on prefix
by Andy Kama 13 Oct '20

13 Oct '20

Hi All, What is the best way to approach this? example if a call comes into kamailio with a specific number it example to:123456789 it must go to the dispatcher module but if a call comes with any other number it must route to a uac or can you use uac with dispatcher? basically i want to route inbound calls to a dispatcher and calls from that dispatcher out a uac

2 2

Caseless regex
by Marat Gareev 13 Oct '20

13 Oct '20

Hello, Is it possible write more readable regular expression if ($tU =~ "(?i)^test$") { ... } instead of "^[tT][eE][sS][tT]$"? On the first option, I get the error: 0(47250) ERROR: <core> [core/rvalue.c:3038]: fix_match_rve(): Bad regular expression Regards, Marat

3 5

← Newer
1
2
3
4
5
6
7
8
9
Older →

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users October 2020