sr-users May 2019

sr-users@lists.kamailio.org

84 participants
100 discussions

$snd(proto) mapping?
by Andrew Chen 21 May '19

21 May '19

Hey guys, Is there a numeric mapping for $snd(proto)? Thanks -- Andy Chen Sr. Telephony Lead Engineer achen@ <achen(a)thinkingphones.com>fuze.com -- *Confidentiality Notice: The information contained in this e-mail and any attachments may be confidential. If you are not an intended recipient, you are hereby notified that any dissemination, distribution or copying of this e-mail is strictly prohibited. If you have received this e-mail in error, please notify the sender and permanently delete the e-mail and any attachments immediately. You should not retain, copy or use this e-mail or any attachment for any purpose, nor disclose all or any part of the contents to any other person. Thank you.*

2 1

How to get started (configuring an interconnection)
by Benoit Panizzon 21 May '19

21 May '19

Dear Kamailio Users I might need a bit help with starting. We are a TSP and at the moment we use a commercial carrier grade voice switch, which is very VERY inflexible and where bugs we find either don't get fixed, or only with a large delay. As everywhere else we embrace opensource and enjoy the possibility to quickly fix bugs ourselves (we have a software development department) we are evaluating Kamailio. Basically, if we have a centralized SIP routing engine, which can record CDRS for Billing and do some Number Translations (lookup on external service or database) for (location based emergency numbers, call forwarding services, ported numbers, call spam blacklisting) we could do way more than our actual $$$ carrier switch is capable of. Kamailio sounds like perfect for this task. First step: Get a machine up and running with Kamailio and Siremis, done, that was easy. Next: Connect his SIP wise via what I would call a 'SIP carrier interconnecton', ip based authenticated trunk between our carrier switch and Kamailio so we can route some number ranges from our carrier switch to Kamailio and then continue to test with subscribers, subscriber trunks and all else we need on Kamailio. I'm quite fluent in Asterisk (our Voicemail and Announcement Services are based on Asterisk) and SIP and have come across many different PBX, but after reading parts of the documentation, and trying myself to understand how Kamailio talks to other SIP endpoints I am a bit at a loss. I would have expected that I would configure our carrier switch as 'remote SIP gateway' or whatever it would be called. But I start fearing, Kamilio works completely differently. So I might need a bit of pointing the right direction to get started. I did try with the 'CarrierRoute Management' or 'Dispatcher' functions, but I only find very little documentation on this. So how do I get started? How do I, for starters, tell Kamailio what the Hostname or IP of my Carrier switch is and how do I set a 'default' call route to this? Kind regards -Benoît Panizzon- -- I m p r o W a r e A G - Leiter Commerce Kunden ______________________________________________________ Zurlindenstrasse 29 Tel +41 61 826 93 00 CH-4133 Pratteln Fax +41 61 826 93 01 Schweiz Web http://www.imp.ch ______________________________________________________

2 1

Storing an integer value into AVP from REDIS string
by Stephen Bucklin 21 May '19

21 May '19

Hi, Any quick thoughts. I am using a REDIS "GET" to retrieve a JSON obj as a string from REDIS and then the JANSSON get value to extract a key value from the string and pop it into an AVP ($avp(val)) and wish to ensure the value is an integer in the AVP. New to this, be kind :-) Steve

4 6

How to define IP Trunk in kamailio
by Mary Honey 21 May '19

21 May '19

Hello everyone, I install and setup an IMS Network by kamailio-5.2.2 . I have p-cscf, i-cscf and s-cscf in three different systems . my Hss is Fokus. Registration and call between subscribers of network work successfully . now I want to define IP Trunk in my network which can pass external calls through my IMS network. I don't know how to define IP Trunk and changes in which element(pcscf, icscf or scscf) should be done.

2 3

Rewrite contact header
by R, Rajkumar (Raj) 21 May '19

21 May '19

Hello, We are using alias routing from NATHelper module and I've a case where the alias part 'alias=ip~port~transport' needs to be removed from the contact header in 2xx message. There's contact header reference "$ct" pseudo variable but it is read only. Is there any approach available to achieve this as I haven't found anything in the forum archive search so far. thanks, raj

2 2

Unable to CDRs on "Busy Here 486" from remote side and save start and end time on successful call in table
by Shahid Mehmood 21 May '19

21 May '19

Hello, i want to save the status each call into the database. but failed to 1. record CDRs for "Busy Here 486/ service unavailable 503 " from remote side in database. 2. on successful call unable to record total time of call in database. Version of Kamailio Is *version: kamailio 4.4.7 (x86_64/linux) 35d8abflags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RESADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MBpoll method support: poll, epoll_lt, epoll_et, sigio_rt, select.id: 35d8ab* *Also Attached Config File* *Thanks*

1 0

kamailio Early IMS security
by eyas barhouk 20 May '19

20 May '19

hello community Does kamailio support Early IMS security authentication schema to be able to integrate with Huawei HSS ?? and if it's does how to configure it? B.R Eyas

1 0

Plans for next major release - v5.3.0
by Daniel-Constantin Mierla 20 May '19

20 May '19

Hello, a while ago, during the last IRC devel meeting, it was proposed to either do the next major release (5.3.0) before the usual summer holidays or leave it for autumn. Given that time is approaching, we have to decide. If it is going to happen before the summer holidays, probably we should freeze the development in 2-3 weeks, then do 3-4 weeks of testing and release during the first part of July. It would be a shorter development cycle, so I do not expect much needs for testing. Only a few new modules and plenty of work to consolidate and enhance the existing code. Any preference for one of the two options? Cheers, Daniel -- Daniel-Constantin Mierla -- www.asipto.com www.twitter.com/miconda -- www.linkedin.com/in/miconda

3 2

Kamailio usrloc mode 3 using mongodb
by José Seabra 20 May '19

20 May '19

Hello there, I'm testing usrloc module with mongodb and i have a couple of questions to do. What i would like to know/have confirmation is if the fields that are specified in the following link https://kamailio.org/docs/db-tables/kamailio-db-5.2.x.html#gen-db-location-… can be used to create indexes in mongodb? I'm noticing that when a register is updated/deleted or expires kamailio prints the following INFO logs: *db_mongodb [mongodb_dbase.c:526]: db_mongodb_get_columns(): unhandled data type column (methods) type id (10), use DB1_STRING as default* *db_mongodb [mongodb_dbase.c:526]: db_mongodb_get_columns(): unhandled data type column (instance) type id (10), use DB1_STRING as default* These fields (*methods and **instance*) are stored in mongodb document with a null string, e.g: *{* * "_id" : ObjectId("5cdc775a6472740055289a11"),* * "username" : "x1000",* * "contact" : "sip:x1000@192.168.1.1:5674;transport=UDP",* * "expires" : ISODate("2019-05-15T20:33:26Z"),* * "q" : -1,* * "callid" : "sipp-ci2-edge-sip-proxy1-20190515203220-1-21(a)172.31.2.61 <sipp-ci2-edge-sip-proxy1-20190515203220-1-21(a)172.31.2.61>",* * "cseq" : 2,* * "flags" : 0,* * "cflags" : 0,* * "user_agent" : "sipp",* * "received" : "sip:191.30.10.23:8888 <http://191.30.10.23:8888>",* * "path" : "<sip:172.31.2.61:5060;received=sip:191.30.10.23:8888;lr>",* * "socket" : "udp:172.31.2.11:5060 <http://172.31.2.11:5060>",* * "methods" : null,* * "last_modified" : ISODate("2019-05-15T20:32:26Z"),* * "ruid" : "uloc-15-5cdc7756-55-1",* * "instance" : null,* * "reg_id" : 0,* * "server_id" : 21,* * "connection_id" : -1,* * "keepalive" : 0,* * "partition" : 0* *}* Should i be concerned about that log msg? how can i avoid it? Thanks Regards -- Cumprimentos José Seabra

2 5

BYE relays Digest and others in Proxy-Authorization header
by Sergiu Pojoga 19 May '19

19 May '19

Hi ppl, Noticed BYE requests relayed from caller to callee have the *Proxy-Authorization* header including *Digest*, *nonce* and *response*. Is that by SIP definition or am I doing something wrong? My concern is the callee gets to see caller's authentication credentials. Thanks.

4 6

← Newer
1
2
3
4
5
6
7
8
9
10
Older →

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users May 2019