sr-users December 2019

sr-users@lists.kamailio.org

63 participants
77 discussions

rtjson and uac_auth not updating to/from headers

by Ben Merrills

Hi, I am using rtjson module to do some call routing, as part of that I've added an additional section to the document to include authentication information. I am using the uac_auth function from within failure_route to send authentication on to the uri. This works fine... however. When the initial invite is sent, the To/From headers are updated as per the rtjson document. This isn't the case however when the uac_auth function re-sends the invite with the digest header. The original to/from are being sent. I am using the dialog module restore_mode = auto restore_dlg = 1 I assume there is something I need to call, but none of the RTJSON functions seem to be available within failure_route. Any pointers as to where I am going wrong would be greatly appreciated. Thanks in advance. Ben failure_route[TRUNKAUTH] { if (t_is_canceled()) { exit; } if(t_check_status("401|407")) { $avp(auser) = $avp(s:authUser); $avp(apass) = $avp(s:authPass); uac_auth(); t_relay(); exit; } }

4 years, 4 months

Changing name of the 'versions' table

by Ben Kaufman

Is it possible to use a table other than 'version' a the version table? i.e. if I'm in a shared DB, and there's an existing table named 'version' with completely different schema, is there a way I can create a table like 'kamailio_version' with the correct schema and data and use it instead? -- Ben Kaufman STATEMENT OF CONFIDENTIALITY: The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain confidential or privileged information. If you are not the intended recipient, or the person responsible for delivering the e-mail to the intended recipient, be advised you have received this message in error and that any use, dissemination, forwarding, printing, or copying is strictly prohibited. Please notify AltiGen Communications immediately at either (888)258-4436 or via email to administrator(a)altigen.com, and destroy all copies of this message and any attachments.

4 years, 4 months

Calculate call duration

by Duarte Rocha

Greetings, How sould a call duration be calculated? Let's say the call creation on Kamailio as a proxy has those steps : 1 - Invite is received 2 - Provisional responses 3 - 200 OK is received 4 - ACK to 200 OK is received 5 - BYE is received 6 - 200 OK to BYE is received Should the duration begin to count on step 3 (200-Ok Received) or 4 (ACK received) ? Should it end on the step 5 or 6? ACC module tells me that start time for CDR can either be on dialog creation or confirmation - https://www.kamailio.org/docs/modules/5.2.x/modules/acc.html#acc.p.cdr_star… - What is the dialog creation ? Is it when the INVITE is received ? - According to DIALOG module, a confirmed dialog can be "Waiting for ACK" or "Active Call". Which one is used by acc module? Best Regards,

4 years, 4 months

Merry Christmas and Happy Holidays!

by Daniel-Constantin Mierla

Another year getting to its end, the season holidays are ahead, therefore it is no better time than now to express my thanks and greetings to all the friends, developers, supporting companies and community members that made 2019 an outstanding year for Kamailio project. Enjoy the holidays! Merry Christmas! Daniel * Santa is flying Kamailio! * -- Daniel-Constantin Mierla -- www.asipto.com www.twitter.com/miconda -- www.linkedin.com/in/miconda Kamailio World Conference - April 27-29, 2020, in Berlin -- www.kamailioworld.com

4 years, 4 months

topos: how to hide one side only

by Dmitri Savolainen

Hi all. I have Kamailio with 2 addr: kamailio_external_ip - for client interconnect kamailio_internal_ip - for local media server interconnect Like this: client - kamailio_external_ip - kamailio_internal_ip - media_server "topos" module hide sip headers for both "client" and "media_server" side. Is it true: with topos i can't hide headers only for the "client" side and show them for the "media_server"? I want full header set visible for the "media_server", but only kamailio_external_ip visible for the "client". -- Savolainen Dmitri

4 years, 4 months

Getting error in auth modules- Installing Kamalio 5.2

by Mahesh Kumar

Hi Team, Getting error in auth modules during Kamalio 5.2 installation and doing SIP routing, anyone know this why i am getting below error..?? Please support..!! Error Snapshot ======================================== (2807) ERROR: <core> [core/cfg.y:3370]: yyparse(): cfg. parser: failed to find command www_authorize (params 2) 0(2807) CRITICAL: <core> [core/cfg.y:3510]: yyerror_at(): parse error in config file /etc/kamailio/kamailio.cfg, line 1081, column 48: unknown command, missing loadmodule? 0(2807) ERROR: <core> [core/cfg.y:3370]: yyparse(): cfg. parser: failed to find command www_challenge (params 2) 0(2807) CRITICAL: <core> [core/cfg.y:3510]: yyerror_at(): parse error in config file /etc/kamailio/kamailio.cfg, line 1082, column 29: unknown command, missing loadmodule? 0(2807) ERROR: <core> [core/cfg.y:3370]: yyparse(): cfg. parser: failed to find command consume_credentials (params 0) 0(2807) CRITICAL: <core> [core/cfg.y:3510]: yyerror_at(): parse error in config file /etc/kamailio/kamailio.cfg, line 1086, column 22: unknown command, missing loadmodule? 0(2807) ERROR: <core> [core/cfg.y:3370]: yyparse(): cfg. parser: failed to find command proxy_authorize (params 2) 0(2807) CRITICAL: <core> [core/cfg.y:3510]: yyerror_at(): parse error in config file /etc/kamailio/kamailio.cfg, line 1097, column 41: unknown command, missing loadmodule? 0(2807) ERROR: <core> [core/cfg.y:3370]: yyparse(): cfg. parser: failed to find command proxy_challenge (params 2) 0(2807) CRITICAL: <core> [core/cfg.y:3510]: yyerror_at(): parse error in config file /etc/kamailio/kamailio.cfg, line 1098, column 31: unknown command, missing loadmodule? 0(2807) ERROR: <core> [core/cfg.y:3370]: yyparse(): cfg. parser: failed to find command consume_credentials (params 0) 0(2807) CRITICAL: <core> [core/cfg.y:3510]: yyerror_at(): parse error in config file /etc/kamailio/kamailio.cfg, line 1102, column 22: unknown command, missing loadmodule? ======================================== Commands in Kamalio.cfg =================================================== route[2] { # ----------------------------------------------------------------- # REGISTER Message Handler # ---------------------------------------------------------------- if (!www_authorize("192.168.1.67","subscriber")) { www_challenge("$td","0"); break; }; consume_credentials(); if (!save("location")) { sl_reply_error(); }; } route[3] { # ----------------------------------------------------------------- # INVITE Message Handler # ----------------------------------------------------------------- if (!proxy_authorize("$fd","subscriber")) { proxy_challenge("$fd","0"); break; }; consume_credentials(); # Forward to SDIN S3 rewritehostport("uk.sdin.bt.net:5060"); forward(uk.sdin.bt.net,5060); break; } route[4] { # ----------------------------------------------------------------- # CANCEL or ACK Message Handler # ----------------------------------------------------------------- # Forward to SDIN S3 rewritehostport("uk.sdin.bt.net:5060"); forward(uk.sdin.bt.net,5060); break; } ========================================================

4 years, 4 months

Kamailio at 36c3, Happy holidays

by Henning Westerholt

Hello, I will be at the 36c3 [1] congress in Leipzig. So, if you are also there and want to chat about Kamailio or other RTC topics, please contact me. I wish you all Merry Christmas and a Happy New Year! Henning [1] https://events.ccc.de/congress/2019/wiki/index.php/Main_Page -- Henning Westerholt - https://skalatan.de/blog/ Kamailio services - https://gilawa.com<https://gilawa.com/>

4 years, 4 months

Not working : Using $cfg(line) to print line number

by mahesh b

Hi All, Below is the syntax am using to print the line number in kamailio configuration file. xlog("L_WARN","Hi Mahesh at line $cfg(line)\n"); Unfortunately , when i do this looks like kamailio is not starting, Any help please regarding what am i missing here. I tried Xlogl as well, which doesnt print the line number by default in my setup. This is the details i had read to understand config file attributes : $cfg(key) - Config File Attributes Attributes related to configuration file. The key can be: - line - return the current line in config - name - return the name of current config file - file - return the name of current config file - route - return the name of routing block Example: send_reply("404", "Not found at line $cfg(line)")

4 years, 4 months

rtpproxy_manage() doesn't recognize SDP when Content-Length is not present

by Leonid Fainshtein

Hi, According to RFC-3261 p.20.14, the Content-Length header field must be present only if a stream-base transport protocol (such as TCP) is used. Therefore, in the case of the UDP transport protocol, this field is optional. Unfortunately, the rtpproxy_manage() function in Kamailio v.5.2.5 doesn't recognize the SDP body when the Content-Length header field is not present: Dec 22 08:58:34 pbx kamailio[13456]: 4(13488) WARNING: {1 1 INVITE wrjxwyuke5ukvvwwxd00zwtu0ktfuzuf(a)10.18.5.64} sanity [sanity.c:585]: check_cl(): content length header missing in request Dec 22 08:58:34 pbx kamailio[13456]: 4(13488) INFO: {1 1 INVITE wrjxwyuke5ukvvwwxd00zwtu0ktfuzuf(a)10.18.5.64} <script>: rtproxy ei. $source:81.xxx.xxx.xxx, INVITE sip:098232787@xxx.xxx.xxx.xxx:5060;user=phone $ Dec 22 08:58:34 pbx kamailio[13456]: 4(13488) ERROR: {1 1 INVITE wrjxwyuke5ukvvwwxd00zwtu0ktfuzuf(a)10.18.5.64} rtpproxy [rtpproxy_funcs.c:182]: extract_body(): failed to get the content length in message Dec 22 08:58:34 pbx kamailio[13456]: 4(13488) ERROR: {1 1 INVITE wrjxwyuke5ukvvwwxd00zwtu0ktfuzuf(a)10.18.5.64} rtpproxy [rtpproxy.c:2271]: force_rtp_proxy(): can't extract body from the message Dec 22 08:58:34 pbx rtpproxy[1386]: DBUG:GLOBAL:get_command: received command "13498_4 LSEIc0,101 wrjxwyuke5ukvvwwxd00zwtu0ktfuzuf(a)10.18.5.64 10.70.227.183 13592 d5k0w3ft-CC-1116-OFC-253;1 as0bf73ed7;1" Dec 22 08:58:34 pbx rtpproxy[1386]: INFO:GLOBAL:handle_command: lookup request failed: session wrjxwyuke5ukvvwwxd00zwtu0ktfuzuf(a)10.18.5.64, tags d5k0w3ft-CC-1116-OFC-253;1/as0bf73ed7;1 not found Dec 22 08:58:34 pbx rtpproxy[1386]: DBUG:GLOBAL:rtpc_doreply: sending reply "0\n" Also, the textops' has_body() function always checks the “Content-Length” presence that is not 100% correct behavior. Just for your information, the problem was discovered in a system where Huawei SoftX3000 is used. It looks like the softswitch removes the “Content-Length” field in an attempt to decrease size of SIP message when it is too long. If the user disables some codecs in their SIP phone then SoftX3000 keeps the “Content-Length” untouched. Should I open a bug regarding this matter? Best regards, Leonid Fainshtein Xorcom Ltd

4 years, 4 months

Disabling weak SSL Cypher suites

by Arik Halperin

Hello, How can I disable: TLS_RSA_WITH_RC4_128_SHA (0x5) INSECURE128 TLS_RSA_WITH_RC4_128_MD5 (0x4) INSECURE128 What should I put in cypher_list in order to disable the above? I would also like support TLS 1.2 and TLS 1.3, but remove support for 1.0 and 1.1 Thanks, Arik Halperin

4 years, 4 months

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users December 2019