sr-users September 2017

sr-users@lists.kamailio.org

86 participants
124 discussions

Kamailio SIP protocol over WSS
by Washington Costa 05 Sep '17

05 Sep '17

Hi, I solved my problem. I was missing load some modules and routers. I saw this file as example: https://gist.github.com/jesusprubio/4066845 but is important to know that every module the begin "mi" they aren't supporte on Kamailio 5.0. You will need replace for the module relative the version 5.0. Washington L da Costa Analista de Sistemas (82) 9 9823-4782

2 1

Question about fix_nated_contact.
by Володимир Іванець 04 Sep '17

04 Sep '17

Hello everyone, I have system setup where there are few Asterisk servers behind Kamailio that is behind the firewall. There is a problem with call initiation. When phone from outside sends INVITE to Kamailio, it then passes it to one of Asterisk servers. Asterisk server eventually replies to Kamailio with 200 OK. Contact header contains Asterisk's local IP address and port. Kamailio executes function *fix_nated_contact* before sending reply to the phone. However Contact header will still have Asterisk's local socket. *fix_nated_contact* is being executed with no doubt. I can see xlog output that I set before and after it. Can someone tell how exactly *fix_nated_contact* gets "*request's source address:port pair*" and if it can be printed to the log? Thank you!

1 0

Homer confusion ....
by Mark Boyce 04 Sep '17

04 Sep '17

Hi All Trying to get a basic version of homer working on Kamailio V5. So far I have sipcapture throwing everything in to a single mysql table. So first question; Should I be using sipcapture or siptrace? I’m not sure I can see the difference. Second question; On what I have working so far using sipcapture, I’m seeing the invites, subscribes, cancels, act’s all end up in the database. What I’m missing is any responses from Kamailio back to the handset (AUTh Challenges etc) modparam("sipcapture", "db_url", "mysql://sipcapture:secretpassword@localhost/homer_data") modparam("sipcapture", "capture_on", 1) modparam("sipcapture", "hep_capture_on", 1) modparam("sipcapture", "insert_retries", 5) modparam("sipcapture", "insert_retry_timeout", 10) plus a sprinkling of "sip_capture(); “ in the “xxx_route {“ blocks What am I missing? Mark

4 6

presence_xml mod_init(): Can't bind xcap_client
by Borislav Gergov 04 Sep '17

04 Sep '17

*Hi I have presence_xml parameter force_active set to 1 and still i get **error** presence_xml:mod_init: Can't bind xcap_client* *kamailio 5.1.0-dev6 (x86_64/linux) *

2 3

MWI forwarding between Kamailio and Freeswitch
by Wang, Wallace 04 Sep '17

04 Sep '17

Hello We're using Kamailio & freeswitch as my company voice system. So far, everything is good, except the MWI. I tried to find out how to forward MWI between Kamailio and Freeswitch, or let the Presence_MWI module can work with the freeswitch behind Kamailio. If it was possiable, could anyone give me an idea or some links or demo configure for this. I really appreciate your help. Best Regards Wallace Wang

2 1

uac +kamailio + dispatcher + asterisk
by Жан Базаров 04 Sep '17

04 Sep '17

Hello! provider trunks registration on kamailio UAC?! it's clear. but how does asterisk find out through which trunk the call should be made? I tried to set the header from asterisk dialplan. for example: if (is_method("INVITE")) { #record_route_preset("109.195.102.122"); route(DIRECTION); setflag(FLT_ACC); # do accounting } # ------ LOADBALANCE ROUTE ------------ # if(!ds_is_from_list()) { route(DISPATCH); } route[DISPATCH] { #round robin dispatching on gateways group '1' if(!ds_select_dst("1", "4")) { send_reply("404", "No destination"); exit; } xlog("L_DBG", "--- SCRIPT: going to <$ru> via <$du>\n"); t_on_failure("RTF_DISPATCH"); route(NATMANAGE); route(DRELAY); exit; } route[DIRECTION] { if ($hdr(x-trunk) != $null) { if (!is_method("BYE")){ $fu=""; t_on_failure("MANAGE_FAILURE"); $dlg_ctx(timeout_route) = "DIALOG_END"; $avp(i:10)=43200; $dlg_ctx(timeout_bye) = 0; sql_pvquery("ca", "select l_uuid, auth_username, auth_password, realm, l_domain, r_domain from uacreg where id='$hdr(x-trunk)'", "$avp(uuid), $avp(uname), $avp(passwd), $avp(realm), $avp(src_ipaddr), $avp(dst_ipaddr)"); t_on_failure("MANAGE_FAILURE"); $dlg_ctx(timeout_route) = "DIALOG_END"; $avp(i:10)=43200; $dlg_ctx(timeout_bye) = 0; $fu=""; uac_replace_from("sip:$avp(uname)@$avp(dst_ipaddr)"); $tu="sip:"+$tU+"@"+$avp(dst_ipaddr); $ru="sip:"+$tU+"@"+$avp(dst_ipaddr); remove_hf("Contact"); $var(contact)="sip:"+$avp(uname)+"@10.49.9.2:5060"; insert_hf("Contact: <$var(contact)>\r\n"); #insert_hf("Contact: "); msg_apply_changes(); fix_nated_register(); xlog("L_INFO","Contact header $var(contact) 111111111111111111111111111111111111111 is $ct {$ct}\n"); route(RELAY); } #### BYE } ### XTRUNK But in this configuration I do not come bye but when I register providers trunks on asterisk - problem with BYE not visible. but I can not register provider-trunks on all the asterisks, because incoming invite arrives at the link + address, and all the asteriscs ring. All my asterisk's behind nat

2 1

jsonrpcs execution error
by David Villasmil 04 Sep '17

04 Sep '17

Hello guys, i configured jsonrpc on kamailio.cfg and RPCFIFOPATH on kamctlrc to the same file, seems to work for some commands, but not for others: root@ip-172-31-30-160:/home/admin# kamctl trusted show +----+--------------+-------+--------------+--------------+------+----------+ | id | src_ip | proto | from_pattern | ruri_pattern | tag | priority | +----+--------------+-------+--------------+--------------+------+----------+ | 1 | 1.2.3.4 | udp | | NULL | | 0 | | 2 | 5.4.3.2 | udp | | NULL | | 0 | +----+--------------+-------+--------------+--------------+------+----------+ root@ip-172-31-30-160:/home/admin# kamctl trusted dump { "jsonrpc": "2.0", "error": { "code": -32000, "message": "Execution Error" }, "id": 32022 } root@ip-172-31-30-160:/home/admin# kamctl trusted reload { "jsonrpc": "2.0", "error": { "code": -32000, "message": "Execution Error" }, "id": 32041 } Any help? Thanks! Regards, David Villasmil email: david.villasmil.work(a)gmail.com phone: +34669448337 ᐧ

2 2

Carrierroute, uac_*, failure_route.
by yu＠yu-boot.ru 04 Sep '17

04 Sep '17

Hello. Have a following task. Select carrier by carrierroute module from db, try to route (dial, relay, bridge - you name it) call there and if call is failed/rejected due to any reason, go to failure_route(?), perform carrierroute lookup again for another carrier and route call there. Main problem is that different carriers require different From/To format. And Kamailio don't allow to use uac* functions in failure_route. How to resolve this? Maybe entire routing method is wrong for my task? Any advice? -- sent from myMail for Android

3 3

Re: [SR-Users] [Freeswitch-users] Fwd: Call drops after 32 seconds with ACK Timeout
by Karsten Horsmann 02 Sep '17

02 Sep '17

Hi Mykyta, since you are plain sip without encryption you can see your sip-traffic on the wire, use sngrep on the kamailio box to figure out whats with the sip-dialogs - it helps a lot. https://github.com/irontec/sngrep and if its more an kamailio config problem, it would be better to stay at sr-users@. Or you can setup an webhomer for debugging. Kind Regards 2017-09-01 17:49 GMT+02:00 Sean Ingham <sean(a)missionlabs.co.uk>: > Once a call is answered FreeSWITCH sends a 200 OK SIP message to your > Kamailio loadbalancer. As per the SIP spec your kamailio box should respond > to a 200 OK with an ACK. The FS logs show that it never receives an ACK, > and it repeatedly tries sending the 200 OK with no response. After 30 > seconds without an ACK FS will assume the call has failed and hangup. > > Looking at your Kamailio SIP logs you can see the 200 OKs getting through > okay, and no attempt to send an ACK back to FS. I think this indicates an > issue with your kamailio.cfg rather than FreeSWITCH. > > > Sean > www.wirex-precision.co.uk > > On Fri, Sep 1, 2017 at 3:40 PM, Микита Нікітенко < > nikitanikitenko(a)gmail.com> wrote: > >> >> Hello! I have server at digital ocean with a floating ip address and I >> have routed sip traffic to this floating ip. At this server installed >> kamailio which balancing between freeswitch servers. I have a problem that >> call drops after 32 seconds with error ACK Timeout. Traffic comming throug >> the kamailio proxy. >> >> kamailio.cfg - https://pastebin.com/x0CL3TEZ >> kamailio sip messages log - https://pastebin.com/wyT3cBbD >> freeswitch logs with sip debug - https://pastebin.com/zPysfQkV >> >> I'm struggling for a week and have no idea how to fix it. >> Thank you very much. >> Mykyta Nikitenko >> >> >> >> -- Mit freundlichen Grüßen *Karsten Horsmann*

2 1

Call drops after 32 seconds with ACK Timeout
by Микита Нікітенко 01 Sep '17

01 Sep '17

Hello! I have server at digital ocean with a floating ip address and I have routed sip traffic to this floating ip. At this server installed kamailio which balancing between freeswitch servers. I have a problem that call drops after 32 seconds with error ACK Timeout. kamailio.cfg - https://pastebin.com/x0CL3TEZ kamailio sip messages log - https://pastebin.com/wyT3cBbD freeswitch logs with sip debug - https://pastebin.com/zPysfQkV I'm struggling for a week and have no idea how to fix it. Thank you very much. Mykyta Nikitenko

2 1

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users September 2017