sr-users August 2017

sr-users@lists.kamailio.org

89 participants
144 discussions

by Abdul Basit

Hi, I am trying to capture and distinguish two types of cancels generated by kamailio. 1- Cancel when Invite timeout 408 2- Cancel generated when call lands on multiple devices and any one of them answer the call. This type of cancel comes with (rfc3326) Reason: SIP;cause=200;text="Call completed elsewhere" How can I capture and isolate these proxy generated CANCEL events? -- regards, abdul basit

7 years, 4 months

Diaplan module

by Nelson Migliaro

Hello, I am trying to use the dialplan module but I am having this problem: First of all, I pull the "dpid" value from the two first digits of the dnis: $var(dialplan_vendor) = $(rU{s.substr,0,2}); Then if(!dp_translate("$var(dialplan_vendor)","$dlg_var(servicio)/$var(ani_dialplan)")) { xlog("L_NOTICE","Error al seleccionar el dialplan\n"); sl_send_reply("403", "Not allowed"); drop; } But when I test everything I get: ERROR: dialplan [dialplan.c:233]: dp_get_ivalue(): no AVP, XAVP or SCRIPTVAR found (error in scripts) I think the problem is related to variable $var(dialplan_vendor). It is set up as string due to the transformation and dialplan need a integer. If I set up the variable this way for testing: $var(dialplan_vendor) = 18, it works correctly. Question, how can I transform the sting into a integer? Thank you Nelson.

7 years, 4 months

Consistency: -1 sometimes true, sometimes false

by Sebastian Damm

Hi, we recently stumbled upon the following problem: We had something like this in our route: $var(ret) = allow_address("2"); if ($var(ret)) { do_something; } Turns out, this always evaluates to true, no matter whether the IP address really is in address group 2 or not. The values in $var(ret) are 1 or -1, depending on the outcome of allow_address(). However, if we write it this way if (allow_address("2")) { do_something; } the code inside is only executed if the IP address is in address group 2. Is this some kind of inconsistency? Should negative values in variables evaluate to true or false? Best Regards, Sebastian

7 years, 4 months

Feature request: USRLOC jsonrpc ul.add - set all entry fields

by Dmitry Sytchev

Hi Daniel! Looking into code it seems RPC functions of USRLOC don't allow setting all fields for USRLOC entry, for example, Received and Socket. It would be great if we can set these, because we need to have ability to transfer contacts from other server to Kamailio. I think at present this can be done sending specially crafted fake REGISTER packets or calling special route from HTTP with some tricks for saving contact and received, but as for me it would be great to set it from RPC because we already have ul.add method. It also would be cool if we can use named parameters in JSONRPC params: {} section with names corresponding to usrloc fields, like 'table', 'AOR', 'received' and so on. Maybe on specual key not to mix with current 'params'. Thanks for your great work! -- Best regards, Dmitry Sytchev, IT Engineer

7 years, 4 months

Feature request: USRLOC jsonrpc ul.add - set all entry fields

by Dmitry Sytchev

7 years, 4 months

Kamailio APP_LUA

by santosh gupta

Hi Robert, Hope you are doing good. You have helped me in the past. I need to set LCR via app_lua, getting rates and destination from mysql. Link which i am following is https://www.kamailio.org/wiki/embeddedapi/4.0.x/lua The issue is I am not able to get connect via sr commands for example sr.sqlops.query("connection", "query", "result") What should be exactly is "connection", "query", "result" Error I am getting in syslog is /usr/local/kamailio/etc/kamailio/kamailio.lua:1: attempt to index field 'sqlops' (a nil value) I am using kamailio 5.0.2 A little bit of headsup will help me. Thanks a lot again. -- Regards Santosh Gupta +91 9323043570 <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_cam…> Virus-free. www.avg.com <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_cam…> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

7 years, 4 months

Query in Dialplan module

by Logeshwaran G

Hi, I have one query in Dialplan module, my scenario is If I call 22291+++++++++ the first three digit should remove and the call place to 91+++++++. But i dont get the exact result, the first three digits are not removing. I have used the below rules: Lcr_rule table: ============ id: 5 lcr_id: 2 Prefix:22291 Request uri: NULL Stopper: 1 Enabled: 1 LCR_rule_target: ================== id:3 lcr_id:2 rule_id:5 gw:id:2 priority:1 weight:1 Dialplan table: ============= id:3 dpid:2 pr:1 match_op:1 match_exp: ^222[0-9]+$ subst_exp: ^222[0-9]+$ repl_exp:\1 Is it correct or not, Please guide me. Thanks & Kind Regards, Logeshwaran G

7 years, 4 months

Set up caller ID

by Nelson Migliaro

Hello, I have several Asterisk sending calls to a centralizad Kamailio. I would like this Kamailio to set up the caller id number of the calls. I am using the uac_replace_from function but I would like to pull the caller id from a database to set up the number based on the sip vendor the call is forwarded What would be the correct way to do that? I was thinking of: sql_query("ca", "select ddi from ddi_table where xxx= $rU limit 1", "ra"); $avp(dnis) = $dbr(ra=>[0,0]); sql_result_free("ra"); But I am afraid of causing a bottheneck on the database. As usual, thank you for the help. Regards, Nelson.-

7 years, 4 months

rtpproxy rtp timeout

by yu＠yu-boot.ru

Hello. What version of rtpproxy app should be used for this feature to work with Kami? How to use it correctly? -- Отправлено из myMail для Android

7 years, 4 months

snmpstats get calls that have ended in 5xx cause code

by Olli Attila

Hello, I have Kamailio 5.0 configured with snmpstats module. I can succesfully query for eg. the current num of dialogs on kamailio by issuing: snmpget -v 2c -c public localhost KAMAILIO-MIB::kamailioCurNumDialogs.0 KAMAILIO-MIB::kamailioCurNumDialogs.0 = Gauge32: 0 Is it possible to make query about calls that have ended with 5xx sip cause code on last 5min or 15min? I noticed that the following is available on the snmpstats module but it only holds a counter that keeps increasing until I restart kamailio process: snmpget -v 2c -c public localhost KAMAILIO-MIB::kamailioTotalNumFailedDialogSetups.0 Also I think the above includes all cause codes that are between 3xx-6xx. Cheers, --Olli

7 years, 4 months

← Newer
1
2
3
4
5
6
7
8
...
15
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users August 2017