sr-users September 2016

sr-users@lists.kamailio.org

87 participants
127 discussions

jansson_get path to access a JSON reponse containing an array

by Jonathan Hunter

Hi guys, Sorry for the question but Its not clear to me using json_path and the jansson module how to get the contents of a response containing an array. Please see the returned response below that I am getting on kamailio; {"status":"success","destination"[{"msisdn":"4412345566","route":"Carrier1"}],"maxduration":"60","source":"447777777","message_id":"c41c1823aafb80f44620f4cdc6802c0d"} I can access any of the fields status,destination,maxduration,source,message_id fine, however you will notice with destination it has an array (as multiple destinations with other queries could return more than one choice). So currently when I do jansson_get_field("$http_rb", "destination", "$var(mapdestination)"); I get; [{"msisdn":"447107110194","route":"carrier1"}] How do I get into the contents of the array in the first place so I can return the msisdn value itself, and the route? This is not a problem if its not an array, however if the result is contained within [] how do I indicate the path? I have tried destination[0], destination.msisdn with no luck, and Im sure I am missing something so any advice would be great. Thanks Jon

7 years, 7 months

Planning the release of Kamailio v4.4.3

by Daniel-Constantin Mierla

Hello, now that the summer in the northern hemisphere is gone and many of us returned at the work, I am considering to release a new version of Kamailio out of the latest stable branch 4.4. The plan is to have it out next week, either on Wednesday Sep 14 or Thursday, the following day. If the are issues not reported on the bug tracker from github project, it is better to open one item. Do it also if you reported something on sr-users or sr-dev in the past two months and it is not actual discussion about it, likely it was forgotten or not noticed during the holidays and digesting the archive is going to take a while. Cheers, Daniel -- Daniel-Constantin Mierla http://www.asipto.com - http://www.kamailio.org http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda

7 years, 7 months

Kamailio as Proxy with public and private interface

by gmele

Hello, we are building a new SIP service composed by a 2 SIP Proxies and 2 SIP Registrars. There is only one proxy active (controlled by keepalived). To secure our SIP infra, we have decided to publish a TLS public interface on the proxy side. The SIP registrar will not be reachable from the outside, so we have added a provate interface on the SIP proxy and another one on the SIP registrar (192.168.1.x). In brief: SIP Proxy, 2 I/F, 213.xxx.xxx.xxx (TLS public) and 192.168.1.x (UDP private) SIP Registrar, 1 I/F, 192.168.1.x (UDP private). Is this architecture possible with kamailio? We tried to implement this, but it seems that all requests incoming from the public IP address are correctly routed to the SIP registrar, but with the public IP instead of the private one, resulting in the impossibility to send the SIP requests to the registrar. Should we add a VIA toute in the SIP message before forwarding it to the SIP registrar? How can this be done? Thx for your help Giovanni -- View this message in context: http://sip-router.1086192.n5.nabble.com/Kamailio-as-Proxy-with-public-and-p… Sent from the Users mailing list archive at Nabble.com.

7 years, 7 months

Issues on getting Notify Body data and parse it

by José Seabra

Hello there, I'm facing some issues trying to get the attributes from notify Body that contains information that i need for my calls . First i save the $rb into $var then i try to replace the characters #012 that seems to be the separator of all attributes in the body, i have tried it using s.select, s.strip, s.replace but without any success in all of them. The body msg is something like this: Calling-Name-Status: available#012Calling-Name: "teste XX" < sip:XXXXXXXXX@domain.com>#012Presentation-Indicator: allowed Anyone have any idea how can I get the value of each attribute: e.g: Calling-Name-Status: available Calling-Name: "teste XX" <sip:XXXXXXXXX@domain.com> Presentation-Indicator: allowed Best Regards -- José

7 years, 7 months

Dump running config out of Kamailio into a file

by Jesus Tovar

Hi, I currently have a situation with my Kamailio servers sitting in production, the folder containing all configuration files at /etc/kamailio was deleted from the server and there is not backup. Is there a possibility to show or dump the current running configuration into a file so I could restore the configuration file from it. If it happens these servers get restarted then we are going to be in real trouble. Thanks for your help Kind regards, Albert T. Jesus Tovar | Senior Network Engineer | The Summit Group jtovar(a)thesummitgroup.com.au thesummitgroup.com.au 1300 049 749 Level 1, 39 Railway Road, Blackburn VIC 3130 The Summit Group

7 years, 7 months

Radius Authentication for kamailio-4.4.2

by Chan Kwang Mien

Hi, I have installed Kamailio-4.4.2 and radiusclient-ng-0.5.6 for Radius Authentication to a Free Radius Server. I have used the steps in http://www.kamailio.org/docs/openser-radius-1.0.x.html to enable Radius Authentication for Kamailio-4.4.2. However, when I restart kamailio and my SIP phone register to Kamailio, Kamailio did not Radius Authenticate to Free Radius Server. Can anyone advise me on other document for Radius Authentication for Kamailio ? Thanks. Regards, Kwang Mien

7 years, 7 months

pua_dialoginfo: Tags only in "early" state PUBLISH

by Stefan Kohlhauser

Hello everyone! I've been playing around with the pua_dialoginfo. I noticed that the From- and To-Tags are only included in the PUBLISH's dialog-info of the "early" state. This is also true if include_tags of pua_dialoginfo is explicitly set to '1'. The reason for this behaviour is probably that in pua_dialoginfo.c in the function __dialog_sendpublish() the call to dialog_publish_multi() only happens with the tag parameters set for the "early" state. For all other dialog states the tag parameters are statically set to '0'. Even though the local- and from-tags are optional I tend to regard this as a bug. I would have expected for the tags to be included in the dialog-info for all states when include_tags is set. Or is there a reason for this behaviour? Best regards Stefan

7 years, 7 months

Kamailio RFC/3GPP standards

by Owais Ahmad

Hello, I can only see the 3GPP specification mentioned in ims_qos module. Please have the other IMS modules also updated with the respective 3gpp versions. Thanks, Owais

7 years, 7 months

Re: [SR-Users] Kamailio - Multiple NAT

by Gholamreza Sabery

The best way to see what is happening is to capture some packets on the Kamailio system on which calls happen and see if any IP address or port number issues exist in body of SIP messages or not. You can simple use Wireshark to see what is going on. Regards On Mon, Sep 12, 2016 at 4:58 PM, Marino Mileti <marino.mileti(a)alice.it> wrote: > Hi guys, > > > > i'm going in trouble with multinat scenario and Kamailio J > > > > I've this scenario... > > > > Two kamailio boxes with the same configuration (KAM_A and KAM_B). Each box > has a WIFI in AP_MODE with the same address (but different SSID obviously) > 192.168.254.1. Finally there are 2 clients...CLIENT_1 connected to wifi > with KAM_A, and CLIENT_2 connected using wifi with KAM_B. Each box has an > instance of RTPEngine configured. > > KAM_A & KAM_B are also connected using wired connection with other clients > in order to allow that a calls to KAM_B (or KAM_A) generate a forking > scenario and all clients connected starts to RINGS (wired & wireless client) > > > > The mobile client connected on KAM_A makes a call to KAM_B... the forking > scenario starts and all clients on KAM_B starts to ring. > > If any wired client pick up the call everything works fine. If a wireless > client pick up the call...no media L > > > > Is it possible? Should I've to instruct RTPENGINE in any particular mode? > > > > > > *Marino Maria Mileti* > > *marino.mileti(a)alice.it <marino.mileti(a)alice.it>* > > > > *[image: cid:006a01cb6b0e$67eecdae$_CDOSYS2.0]**Reduce your energy > consumption and keep polar bears on ice!* > > > > > ------------------------------ > [image: Avast logo] > <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campai…> > > Questa e-mail è stata controllata per individuare virus con Avast > antivirus. > www.avast.com > <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campai…> > > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users(a)lists.sip-router.org > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > >

7 years, 7 months

Kamailio - Multiple NAT

by Marino Mileti

Hi guys, i'm going in trouble with multinat scenario and Kamailio J I've this scenario... Two kamailio boxes with the same configuration (KAM_A and KAM_B). Each box has a WIFI in AP_MODE with the same address (but different SSID obviously) 192.168.254.1. Finally there are 2 clients...CLIENT_1 connected to wifi with KAM_A, and CLIENT_2 connected using wifi with KAM_B. Each box has an instance of RTPEngine configured. KAM_A & KAM_B are also connected using wired connection with other clients in order to allow that a calls to KAM_B (or KAM_A) generate a forking scenario and all clients connected starts to RINGS (wired & wireless client) The mobile client connected on KAM_A makes a call to KAM_B... the forking scenario starts and all clients on KAM_B starts to ring. If any wired client pick up the call everything works fine. If a wireless client pick up the call...no media L Is it possible? Should I've to instruct RTPENGINE in any particular mode? Marino Maria Mileti <mailto:marino.mileti@alice.it> marino.mileti(a)alice.it cid:006a01cb6b0e$67eecdae$_CDOSYS2.0Reduce your energy consumption and keep polar bears on ice! --- Questa e-mail è stata controllata per individuare virus con Avast antivirus. https://www.avast.com/antivirus

7 years, 7 months

← Newer
1
...
7
8
9
10
11
12
13
Older →

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users September 2016