Hi guys, Sorry for the noise! This works; jansson_get("destination[0].msisdn", Thanks Jon ------------------------------------------------------------------------ From: hunterj91(a)hotmail.com To: sr-users(a)lists.sip-router.org Date: Wed, 14 Sep 2016 08:41:41 +0000 Subject: [SR-Users] jansson_get path to access a JSON reponse containing an array Hi guys, Sorry for the question but Its not clear to me using json_path and the jansson module how to get the contents of a response containing an array. Please see the returned response below that I am getting on kamailio; {"status":"success","destination"[{"msisdn":"4412345566","route":"Carrier1"}],"maxduration":"60","source":"447777777","message_id":"c41c1823aafb80f44620f4cdc6802c0d"} I can access any of the fields status,destination,maxduration,source,message_id fine, however you will notice with destination it has an array (as multiple destinations with other queries could return more than one choice). So currently when I do jansson_get_field("$http_rb", "destination", "$var(mapdestination)"); I get; [{"msisdn":"447107110194","route":"carrier1"}] How do I get into the contents of the array in the first place so I can return the msisdn value itself, and the route? This is not a problem if its not an array, however if the result is contained within [] how do I indicate the path? I have tried destination[0], destination.msisdn with no luck, and Im sure I am missing something so any advice would be great. Thanks Jon _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users