sr-users April 2013

sr-users@lists.kamailio.org

94 participants
132 discussions

var vs avp...
by Victor V. Kustov 30 Apr '13

30 Apr '13

Hi! whats difference $var() and $avp()? -- SY, Victor JID: coyote(a)bks.tv JID: coyote(a)bryansktel.ru I use FREE operation system: 3.8.4-calculate GNU/Linux

7 24

riud access from route block
by Juha Heinanen 30 Apr '13

30 Apr '13

when i call t_relay() on a tcp contact, branch route is executed. in that branch route i call t_on_branch_failure. now if the tcp connection to the contact is broken, for example, due to uas crash, the branch failure route is never executed and thus i cannot get access to $T_reply_ruid. there is $branch(name) pv that gives access to other branched, but not the "main branch". is there any way to get access to ruid of the main branch when t_relay() fails when called from route block? for example, if there is only one contact (the $ru one), which results in t_relay() failure, is there a way to find out the ruid of this contact? -- juha

1 1

kamailio 3.1.4
by Ryan d'Eon 30 Apr '13

30 Apr '13

Hello, I'm trying to support a kamailio install, and they are having a crashing issue. I'm not looking for detailed help on the problem, I just noticed one thing I'd like to check up on here: kamailio 3.1.4 (the version they are running) isn't available for download anymore, though quite a few other old versions are. Are there known bugs? Meaning, should I be worried about this, and go back with the recommendation to upgrade? If so, which is the ideal upgrade path? 3.1.5? 3.1.6? Thanks for any help. Ryan

2 1

!!! about private emails
by Daniel-Constantin Mierla 29 Apr '13

29 Apr '13

Hello, I would like to remind that, at least in my case, writing emails directly without cc-ing the mailing list is not recommended. The rule is also suggested in the mailing lists presentation page: - http://www.kamailio.org/w/mailing-lists/ Unless I asked explicitly for a private email with some specific details, the message will not be noticed and therefore not replied. I use this email address for many public mailing lists and it is intended only for that usage, I am reacting based on the filters I created, unmatched messages getting the lowest priority. There are several common sense as well as technical reasons. Here are some along with other suggestions to improve the likeliness of getting an answer: - we are not answering questions on mailing lists to help only one person, but also other people that may have similar issues in the future -- they can find the answers in the archive with a search engine - the amount of unexpected messages is very high -- it is practically a zero chance to get to the folder with messages that didn't match any filter (thus your message is not going to be replied) - whenever I find time, the first emails I answer are those coming on mailing lists. There are many there as well, people are traveling or having other personal or business projects, so sometime is good to send a reminder if a question does not get an answer - starting with negative approach or no technical content, like you are going to use something else or this application is missing what so ever tutorial giving the solution you need or simply asking for full config of complex requirements, is not helping, making people ignore your messages. Start with what you tried and where you got stuck. Everything you get is for free, nobody here owe you anything. Therefore, if anyone sent me a private message asking about kamailio or continuing a discussion started on mailing lists, then the messages have to be resent on mailing list if one wants an answer. A quick look in my unfiltered folder revealed hundreds of messages during the past year, soon many will be deleted anyhow. Note that you can always mask sensitive data (e.g., replace passwords, IP addresses) before sending logs or config file. Cheers, Daniel -- Daniel-Constantin Mierla - http://www.asipto.com http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda Kamailio Advanced Training, San Francisco, USA - June 24016, 2013 * http://asipto.com/u/katu *

2 1

Rewrite RURI
by Grant Bagdasarian 29 Apr '13

29 Apr '13

Hello, Is it possible to have Kamailio rewrite the Request URI of the INVITE message but sent the INVITE to another address first? For example - Kamailio (10.0.0.1) receives an INVITE - Kamailio rewrites the RURI to 10.0.0.3 - Kamailio sends the INVITE to 10.0.0.2 - The application at 10.0.0.2 sends the INVITE to 10.0.0.3 Regards, Grant

5 5

Re: [SR-Users] Fwd:
by Charles Chance 29 Apr '13

29 Apr '13

Hi, Sincere apologies, not sure how this happened - please ignore, it was not me who sent it :/ Regards, Charles On 2 April 2013 08:21, Charles Chance <charles.chance(a)sipcentric.com> wrote: > http://www.toyosoken.co.jp/ivtduw.php > > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users(a)lists.sip-router.org > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > -- *Charles Chance* Managing Director t. 0121 285 4400 m. 07932 063 891 -- www.sipcentric.com Follow us on twitter @sipcentric <http://twitter.com/sipcentric> Sipcentric Ltd. Company registered in England & Wales no. 7365592. Registered office: Unit 10 iBIC, Birmingham Science Park, Holt Court South, Birmingham B7 4EJ.

1 0

Fwd:
by Charles Chance 29 Apr '13

29 Apr '13

http://www.toyosoken.co.jp/ivtduw.php

1 0

siptrace source ip causes martians
by Thilo Bangert 29 Apr '13

29 Apr '13

Hi, i have a kamailio instance, which is connected to two subnets (A and B) and exchanges sip messages between them. I have setup the siptrace module to send hep tracing messages of all sip messages to a host in subnet B. This works really well for sip messages arriving on the IP of subnet B - for those arriving on subnet A however it doesnt work. The hep messages have the interface address of subnet A set as source address. Since the machine receiving the HEP messages also is connected to both subnet A and B, these messages are (correctly) rejected as martians and never reach the sipcapture module on that host. this is on kamailio 3.3.4. Is there a way to force the source IP of outgoing HEP messages in the siptrace module? thanks kind regards Thilo

2 4

kamaillio as SBC
by Vu Ngo thanh 29 Apr '13

29 Apr '13

I am interested in testing Kamaillio acting as an SBC. The SBC as Outbound proxy server, the IPPhone can register to SIP Server via SBC and make a call via SBC. the topology is bellow The IP Phone A, The IP Phone B --------- register ------- FreeSwitch (SBC-Outbound Proxy) -------- SIP Server Could you please help me how to install and configure FreeSwitch as SBC-Outbound Proxy ? Thanks so much

3 2

Montoring/Reporting Solution - Commercial/Open Source
by Ali Jawad 26 Apr '13

26 Apr '13

Hi I am in need of a solution that does provide me with advanced graphing and report for Kamailio, I.e. ASR/ACD over day/month/destination etc. with tresholds and alerts. Does anyone know about a solution that is compatible with Kamailio and does this ? Thanks

4 5

← Newer
1
2
3
4
5
6
7
...
14
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users April 2013