here is the scenario:
kamailio 4.0.4 running in bridge mode
eth0 : 10.17.0.202
eth1 : 100.200.30.40
a call comes in from ice enabled webrtc client (chrome) from public
internet,
kamailio processed the call, no audio.
if i replace kamailio with asterisk, audio ok.
upon investigating using wireshark, i found out that chrome sends a
"Binding Request" for the IP/port in ICE candidate. Kamailio/rtpproxy sends
back
Binding Success XOR-MAPPED-ADDRESS but the IP is the internal one
10.17.0.202:port
this is not right, the response should be the remote IP/port, not the local
IP/port
Kelvin Chua
That is to say, can I do?
$var(x) = 'P-Asserted-Identity';
xlog("L_INFO", "PAI: $hdr(var(x))\n");
What about remove_hf("$var(x)");
-- Alex
--
Alex Balashov - Principal
Evariste Systems LLC
235 E Ponce de Leon Ave
Suite 106
Decatur, GA 30030
United States
Tel: +1-678-954-0670
Web: http://www.evaristesys.com/, http://www.alexbalashov.com/
Hello List.
The last weekend our kamailio process crashed with this error :
Jun 24 06:55:08 pxh /usr/local/sbin/kamailio[10661]: : <core>
[pass_fd.c:293]: ERROR: receive_fd: EOF on 29
Jun 24 06:55:08 pxh /usr/local/sbin/kamailio[10542]: ALERT: <core>
[main.c:751]: child process 10601 exited by a signal 11
Jun 24 06:55:08 pxh /usr/local/sbin/kamailio[10542]: ALERT: <core>
[main.c:754]: core was generated
Jun 24 06:55:08 pxh /usr/local/sbin/kamailio[10542]: INFO: <core>
[main.c:766]: INFO: terminating due to SIGCHLD
Can someone tell me what seems to be the problem here?
We’re using :
version: kamailio 3.2.2 (x86_64/linux) 98ba92-dirty
flags: STATS: Off, USE_IPV6, USE_TCP, USE_TLS, TLS_HOOKS, USE_RAW_SOCKS,
DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC,
DBG_QM_MALLOC, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE,
USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES
ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16,
MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 4MB
poll method support: poll, epoll_lt, epoll_et, sigio_rt, select.
id: 98ba92 -dirty
compiled on 12:45:36 Feb 2 2012 with gcc 4.4.6
And this is the bt full from gdb
Core was generated by `/usr/local/sbin/kamailio -m 1024'.
Program terminated with signal 11, Segmentation fault.
#0 mi_profile_list (cmd_tree=<value optimized out>, param=<value optimized
out>) at dlg_profile.c:789
789 if ( mi_print_dlg( rpl,
ph->dlg, 0)!=0 )
Missing separate debuginfos, use: debuginfo-install
filesystem-2.4.30-2.1.el6.x86_64 glibc-2.12-1.25.el6_1.3.x86_64
keyutils-libs-1.4-1.el6.x86_64 krb5-libs-1.9-9.el6_1.2.x86_64
libcom_err-1.41.12-7.el6.x86_64 libselinux-2.0.94-5.el6.x86_64
mysql-libs-5.1.52-1.el6_0.1.x86_64 nss-softokn-freebl-3.12.7-1.1.el6.x86_64
openssl-1.0.0-20.el6_2.1.x86_64 pcre-7.8-3.1.el6.x86_64
zlib-1.2.3-26.el6.x86_64
(gdb) bt full
#0 mi_profile_list (cmd_tree=<value optimized out>, param=<value optimized
out>) at dlg_profile.c:789
node = <value optimized out>
rpl_tree = 0x20a6790
rpl = 0x20a67b0
profile = 0x7fe99a2dda00
ph = 0x0
profile_name = <value optimized out>
value = <value optimized out>
i = <value optimized out>
#1 0x00007fe9dce287b1 in run_mi_cmd (fifo_stream=<value optimized out>) at
../../lib/kmi/mi.h:77
No locals.
#2 mi_fifo_server (fifo_stream=<value optimized out>) at fifo_fnc.c:509
mi_cmd = 0x208f8f0
mi_rpl = <value optimized out>
hdl = 0x0
line_len = 41
file_sep = 0x2039017 ""
command = 0x7fe9dfdbdef9 "profile_list_dlgs"
file = 0x7fe9dfd98d78 "/tmp/openser_receiver_27809"
f = 0x2039018
reply_stream = 0x20b0980
#3 0x00007fe9dce2a640 in fifo_process (rank=<value optimized out>) at
mi_fifo.c:247
fifo_stream = 0x209a0b0
#4 0x00007fe9dce2a9de in mi_child_init (rank=0) at mi_fifo.c:211
pid = <value optimized out>
#5 0x00000000004dba41 in init_mod_child (m=0x7fe9dfc6ba10, rank=0) at
sr_module.c:886
No locals.
#6 0x00000000004db9c4 in init_mod_child (m=0x7fe9dfc6bd08, rank=0) at
sr_module.c:883
No locals.
#7 0x00000000004db9c4 in init_mod_child (m=0x7fe9dfc6c248, rank=0) at
sr_module.c:883
No locals.
#8 0x00000000004db9c4 in init_mod_child (m=0x7fe9dfc6c748, rank=0) at
sr_module.c:883
No locals.
#9 0x00000000004db9c4 in init_mod_child (m=0x7fe9dfc6d288, rank=0) at
sr_module.c:883
No locals.
#10 0x00000000004db9c4 in init_mod_child (m=0x7fe9dfc6d928, rank=0) at
sr_module.c:883
No locals.
#11 0x00000000004db9c4 in init_mod_child (m=0x7fe9dfc6dee0, rank=0) at
sr_module.c:883
No locals.
#12 0x00000000004db9c4 in init_mod_child (m=0x7fe9dfc6e1f0, rank=0) at
sr_module.c:883
No locals.
#13 0x00000000004db9c4 in init_mod_child (m=0x7fe9dfc6e5d0, rank=0) at
sr_module.c:883
No locals.
#14 0x00000000004db9c4 in init_mod_child (m=0x7fe9dfc6e830, rank=0) at
sr_module.c:883
No locals.
#15 0x00000000004db9c4 in init_mod_child (m=0x7fe9dfc6ebd0, rank=0) at
sr_module.c:883
No locals.
#16 0x00000000004db9c4 in init_mod_child (m=0x7fe9dfc6f220, rank=0) at
sr_module.c:883
No locals.
#17 0x00000000004db9c4 in init_mod_child (m=0x7fe9dfc6f648, rank=0) at
sr_module.c:883
No locals.
#18 0x00000000004db9c4 in init_mod_child (m=0x7fe9dfc6fa60, rank=0) at
sr_module.c:883
No locals.
#19 0x00000000004db9c4 in init_mod_child (m=0x7fe9dfc6fe40, rank=0) at
sr_module.c:883
No locals.
#20 0x00000000004db9c4 in init_mod_child (m=0x7fe9dfc702c0, rank=0) at
sr_module.c:883
No locals.
#21 0x00000000004db9c4 in init_mod_child (m=0x7fe9dfc70ae8, rank=0) at
sr_module.c:883
No locals.
---Type <return> to continue, or q <return> to quit---
#22 0x00000000004db9c4 in init_mod_child (m=0x7fe9dfc70e18, rank=0) at
sr_module.c:883
No locals.
#23 0x00000000004db9c4 in init_mod_child (m=0x7fe9dfc71100, rank=0) at
sr_module.c:883
No locals.
#24 0x00000000004db9c4 in init_mod_child (m=0x7fe9dfc716c0, rank=0) at
sr_module.c:883
No locals.
#25 0x00000000004db9c4 in init_mod_child (m=0x7fe9dfc71df0, rank=0) at
sr_module.c:883
No locals.
#26 0x00000000004db9c4 in init_mod_child (m=0x7fe9dfc723c0, rank=0) at
sr_module.c:883
No locals.
#27 0x000000000046077d in main_loop () at main.c:1661
i = <value optimized out>
pid = <value optimized out>
si = 0x0
si_desc = "udp receiver child=15 sock=64.76.154.35:5060", '\000'
<repeats 20 times>, "\003", '\000' <repeats 15 times>,
"\030\325\a\232\351\177\000\000\001\000\000\000\002", '\000' <repeats 11
times>,
"\001\000\000\000\000\000\000\000\003\000\000\000\000\000\000\000)\000\000\000\000\000\000"
#28 0x0000000000461f13 in main (argc=<value optimized out>,
argv=0x7fff2f2b2848) at main.c:2475
cfg_stream = <value optimized out>
c = <value optimized out>
r = <value optimized out>
tmp = 0x7fff2f2b3f76 ""
tmp_len = 0
options = 0x5a3178
":f:cm:M:dVhEb:l:L:n:vrRDTN:W:w:t:u:g:P:G:SQ:O:a:A:"
ret = -1
seed = 1850310455
rfd = <value optimized out>
debug_save = <value optimized out>
debug_flag = <value optimized out>
dont_fork_cnt = <value optimized out>
n_lst = <value optimized out>
p = <value optimized out>
(gdb)
Regards,
Ricardo.-
Substituted by callerid mobile number - the higher the operator beats, and
other provider passes. How to write so that the directions to change the
phone number that is displayed with customers from 7452393 to 3493357505
Dear all,
I try to remove a line from an SDP with:
subst_body('/^a=fmtp:8 vad=no(.*)$//g');
unfortunately the "0a" of the end of line ( 0d0a ) is not removed, so the "$" remove only the 0d
any idea how to remove the last "0a"
Best regards
Laurent
Hi, please help me out with these questions:
Is it possible to configure kamailio to use different certificates, one per peer? Do we just add them to the same "calist.pem" file?
Is is possible to configure kamailio to accept a certificate from another device? I mean instead of Kamailio creating the certificate/key and give it to customer/provider. If that is the case, do we also add it to the "calist.pem" file as well?
If all the above is true, what happens when the certificates have different expiration dates?
thank you very much
Hi all,
can anyone comment on the lack of a debian package for the db_cassandra
module ??
I understand there may be reasons to not distribute the binary, but I was
really hoping to find a control file so I can build my own package. any
hints / pointers on the best way to achive this and the reasons behind it
would be great.
--
Sincerely
Jay
Hi ,
I need some help regarding kamailio 3.3 presence issue. Below I mentioned the scenario which I'm doing with kamailio3.3.
I simply install kamailio3.3 with configuration file(as per http://kb.asipto.com/kamailio:presence:k31-made-simple site) which I have attached with this mail.
I have started my kamailio on tcp as well as UDP because I want getting presence with xcap configuration and after configured jitsi when I open the jitsi client it makes the tcp connection with kamailio server and fetch users list from server by following request ( http://ip:port/ xcap-root/resource-lists/users/sip:manav@172.21.183.138/index) and jitsi client gives pop up message i.e http://ip:port/xcap-root/xcap-caps/global/index resource cannot be read . and when I see in wireshark traces it closes the tcp connection .
Can you help me this issue as I need some kind of resolution on high priority ?
Thanx in advance for your support.
Regards,
Manav
===============================================================================
Please refer to http://www.aricent.com/legal/email_disclaimer.html
for important disclosures regarding this electronic communication.
===============================================================================
