sr-users November 2013

sr-users@lists.kamailio.org

100 participants
160 discussions

by Oliver Roth

Hi all Question about error handling with kamailio. We send call to carrier and get back error 404. In carrierfailureroute we catch up this error and send call to an internal freeswitch that plays a voiceprompt saying: "destination not available" In accounting this calls is collected like a "normal" call - cause the internal freeswitch did the connection. I would like to play the voiceprompt but get the error 404 and see the call in the missed calls acc table. With 486 (busy) it is simple because we do not need an rtp response ... just fast busy. How can we handle this for errors we need to play a voiceprompt? What we do in failure route: failure_route[MANAGE_FAILURE] { sip_trace(); setflag(22); if (t_grep_status("486")){ xlog("L_INFO", "Status 486 - busy"); t_reply("486", "Busy"); exit; } revert_uri(); route(NATMANAGE); if (t_is_canceled()) { exit; } xlog("L_INFO", "failure_route rd: $rd replCode: $T_reply_code trunk_in: $avp(s:trunk_in) Tree: $avp(s:tree), rU: $rU, todirection $avp(s:todirection) fu: $fu\n"); if(!cr_next_domain("$avp(s:cr_pref_carr)", "$avp(s:tree)", "$rU", "$avp(s:trunk_in)", "$T_reply_code", "$avp(s:tree)" )){ xlog("cr_next_domain failed"); exit; } if(!cr_route("$avp(s:cr_pref_carr)", "$avp(s:tree)", "$rU", "$rU", "call_id", "$avp(s:todirection)" )){ xlog("cr_route failed"); exit; } xlog("L_INFO", "failure_route rd: $rd replCode: $T_reply_code trunk_in: $avp(s:trunk_in) Tree: $avp(s:tree), rU: $rU, todirection $avp(s:todirection) fu: $fu \n"); $avp(s:trunk_out) = $avp(s:todirection); xlog(, "L_INFO", "RELAY - FailureRoute: Outbound sent via $avp(s:trunk_out) rU $rU -------------------------------------------------------- "); if (is_method("INVITE")) { setflag(FLT_ACC); # do accounting setflag(FLT_ACCMISSED); # oro 28.10.13 } route(ALTERHEADER); t_on_failure("MANAGE_FAILURE"); #append_branch(); if (!t_relay()) { xlog("failureroute t_relay failed"); exit; } }

10 years, 5 months

Re: [SR-Users] SEG FAULT dialog

by Kelvin Chua

I can reproduce it consistently. I am doing serial forking into a non-existent host, when the caller gets impatient, it cancels the call and send another invite. this happens after that. full backtrace: #0 qm_detach_free (frag=0x7fb2b552e2b0, qm=<optimized out>) at mem/q_malloc.c:269 prev = 0x7fb2b5192058 next = 0x0 #1 qm_malloc (qm=0x7fb2b5192000, size=16) at mem/q_malloc.c:386 f = 0x7fb2b552e2b0 hash = -1256644520 #2 0x00007fb2b44f7e93 in set_dlg_variable_unsafe () from /usr/local/lib64/kamailio/modules/dialog.so No symbol table info available. #3 0x00007fb2b44fa3aa in pv_set_dlg_variable () from /usr/local/lib64/kamailio/modules/dialog.so No symbol table info available. #4 0x000000000047be59 in lval_pvar_assign (rv=0x7fb2bf8348f8, lv=0x7fb2bf834750, msg=0x7fb2bf8c7a00, h=<optimized out>) at lvalue.c:353 r_avp = <optimized out> ret = 1 destroy_pval = 1 pvar = 0x7fb2bf834758 pval = {rs = { s = 0x92750b "+1xx882xx111(a)2xx.xx1.3x.2xSIP/2.0\r\nRecord-Route: <sip:6x.x1.4.195;lr=on;ftag=gK085a1dec>\r\nRecord-Route: <sip:6X.2X1.8.8X;lr=on;ftag=gK085a1dec>\r\nAccept: application/sdp\r\nAllow: INVITE,ACK,CANCEL,BYE"..., len = 12}, ri = 0, flags = 4} avp_val = {n = 0, s = {s = 0x0, len = 0}, re = 0x0} v = <optimized out> #5 lval_assign (h=<optimized out>, msg=0x7fb2bf8c7a00, lv=0x7fb2bf834750, rve=0x7fb2bf8348f0) at lvalue.c:401 rv = 0x7fb2bf8348f8 ret = 0 __FUNCTION__ = "lval_assign" #6 0x000000000041cf14 in do_action (h=0x7fffe1b8f710, a=0x7fb2bf8332b0, msg=0x7fb2bf8c7a00) at action.c:1453 ret = -5 v = <optimized out> dst = {send_sock = 0x7fb2bdb0f080, to = {s = {sa_family = 0, sa_data = "\000\000\000\000\000\000\200-\210\000\000\000\000"}, sin = {sin_family = 0, sin_port = 0, sin_addr = {s_addr = 0}, sin_zero = "\200-\210\000\000\000\000"}, sin6 = {sin6_family = 0, sin6_port = 0, sin6_flowinfo = 0, sin6_addr = {__in6_u = { __u6_addr8 = "\200-\210\000\000\000\000\000\016\000\000\000\000\000\000", __u6_addr16 = {11648, 136, 0, 0, 14, 0, 0, 0}, __u6_addr32 = {8924544, 0, 14, 0}}}, sin6_scope_id = 13}}, id = 0, proto = 58 ':', send_flags = {f = 180 '\264', blst_imask = 138 '\212'}} tmp = <optimized out> new_uri = <optimized out> end = <optimized out> crt = <optimized out> cmd = <optimized out> len = <optimized out> user = <optimized out> uri = {user = {s = 0x7fffe1b8eef0 "/", len = 0}, passwd = { s = 0x3000000010 <Address 0x3000000010 out of bounds>, len = -507973920}, host = { s = 0x7fffe1b8ee20 "", len = 17022112}, port = {s = 0x7fb2bffbd720 "", len = 8208}, params = { s = 0x2010 <Address 0x2010 out of bounds>, len = 17030320}, sip_params = { s = 0x2010 <Address 0x2010 out of bounds>, len = -1077387804}, headers = { s = 0x7fb2bffbdfb0 "0z\001\001", len = -507974144}, port_no = 55072, proto = 49147, type = 32690, flags = 17022128, transport = {s = 0x95 <Address 0x95 out of bounds>, len = -1241200896}, ttl = { s = 0x3734000000a0 <Address 0x3734000000a0 out of bounds>, len = -1081931184}, user_param = {s = 0x0, len = 0}, maddr = {s = 0x63371f "", len = -1}, method = {s = 0x7fb2b519cb30 "\220\240H\265\262\177", len = 4310469}, lr = {s = 0x3000000018 <Address 0x3000000018 out of bounds>, len = -507973440}, r2 = { s = 0x7fffe1b8f000 "\210u\223", len = 8187}, gr = {s = 0x2 <Address 0x2 out of bounds>, len = 1}, transport_val = {s = 0x1 <Address 0x1 out of bounds>, len = 0}, ttl_val = { s = 0xffffffffffffffa0 <Address 0xffffffffffffffa0 out of bounds>, len = 17022112}, user_param_val = { s = 0x7fb2bffbd720 "", len = -507974064}, maddr_val = {s = 0x7fb2bf8c7a00 "\016", len = -1081931184}, method_val = {s = 0x2010 <Address 0x2010 out of bounds>, len = -507971824}, lr_val = {s = 0x0, len = -507971824}, r2_val = {s = 0x7fffe1b8f580 "\001", len = -1}, gr_val = { s = 0x7fb2b519cb30 "\220\240H\265\262\177", len = 4346308}} next_hop = {user = {s = 0x0, len = 1}, passwd = {s = 0x7fffe1b8f710 "\002", len = 1237187532}, host = { s = 0x7fffe1b8f710 "\002", len = -507972224}, port = { s = 0xffffffff <Address 0xffffffff out of bounds>, len = -1256600784}, params = { s = 0x3542f9ae92fdfbcc <Address 0x3542f9ae92fdfbcc out of bounds>, len = -589431860}, sip_params = { s = 0x0, len = 17022128}, headers = {s = 0x15 <Address 0x15 out of bounds>, len = 1}, port_no = 0, proto = 0, type = ERROR_URI_T, flags = 4294967200, transport = {s = 0x7fffe1b8efe8 "l\345N", len = -1076936721}, ttl = {s = 0x1 <Address 0x1 out of bounds>, len = -1114716768}, user_param = { s = 0x1c0000002f <Address 0x1c0000002f out of bounds>, len = 7}, maddr = { s = 0x710000000a <Address 0x710000000a out of bounds>, len = 2}, method = {s = 0x0, len = -18000}, lr = {s = 0x1017a30 "EST", len = 6323844}, r2 = {s = 0x7fb2bd8ed356 "tm [t_lookup.c:716]: ", len = -507972224}, gr = {s = 0x7fffe1b8f710 "\002", len = 5148368}, transport_val = {s = 0x0, len = 0}, ttl_val = {s = 0x7fb2bf8c7a00 "\016", len = -507973348}, user_param_val = { s = 0x103bcb0 "<135>Nov 19 07:28:47 /usr/local/sbin/kamailio[15556]: DEBUG: dialog [dlg_hash.c:602]: dlg_lookup(): dialog id=7094 found on entry 2049\n", len = 0}, maddr_val = { s = 0x103bcb0 "<135>Nov 19 07:28:47 /usr/local/sbin/kamailio[15556]: DEBUG: dialog [dlg_hash.c:602]: dlg_lookup(): dialog id=7094 found on entry 2049\n", len = -1115163744}, method_val = { s = 0x99 <Address 0x99 out of bounds>, len = 1384864127}, lr_val = {s = 0x882d80 "", len = -1081312768}, r2_val = {s = 0x7fb2bdb0f080 "\016", len = 8924544}, gr_val = { s = 0xffffffff <Address 0xffffffff out of bounds>, len = -1081930768}} u = <optimized out> port = <optimized out> dst_host = <optimized out> i = <optimized out> flags = <optimized out> avp = <optimized out> st = {flags = 3213654528, id = 32690, name = {n = -507971824, s = {s = 0x7fffe1b8f710 "\002", len = -507972224}, re = 0x7fffe1b8f710}, avp = 0x4ee56c} sct = <optimized out> sjt = <optimized out> rve = <optimized out> mct = <optimized out> rv = <optimized out> rv1 = <optimized out> c1 = {cache_type = 3213020352, val_type = 32690, c = {avp_val = {n = 0, s = { s = 0x7fb200000000 <Address 0x7fb200000000 out of bounds>, len = -1081312768}, re = 0x7fb200000000}, pval = {rs = {s = 0x7fb200000000 <Address 0x7fb200000000 out of bounds>, len = -1081312768}, ri = -1124131338, flags = 32690}}, i2s = "\377\377\377\377\060", '\000' <repeats 16 times>} s = {s = 0x7fffe1b8f0d8 "\260\062\203\277\262\177", len = -507973632} srevp = {0x937588, 0x7fb2bfc4f1fc} mod_f_params = {{type = NOSUBTYPE, u = {number = 0, string = 0x0, str = {s = 0x0, len = 0}, data = 0x0, attr = 0x0, select = 0x0}}, {type = NOSUBTYPE, u = {number = 0, string = 0x0, str = {s = 0x0, len = 0}, data = 0x0, attr = 0x0, select = 0x0}}, {type = NOSUBTYPE, u = {number = 0, string = 0x0, str = {s = 0x0, len = 0}, data = 0x0, attr = 0x0, select = 0x0}}, {type = NOSUBTYPE, u = {number = 0, string = 0x0, str = {s = 0x0, len = 0}, data = 0x0, attr = 0x0, select = 0x0}}, { type = NOSUBTYPE, u = {number = 0, string = 0x0, str = {s = 0x0, len = 0}, data = 0x0, attr = 0x0, select = 0x0}}, {type = NOSUBTYPE, u = {number = 0, string = 0x0, str = {s = 0x0, len = 0}, data = 0x0, attr = 0x0, select = 0x0}}, {type = NOSUBTYPE, u = {number = 0, string = 0x0, str = { s = 0x0, len = 0}, data = 0x0, attr = 0x0, select = 0x0}}, {type = NOSUBTYPE, u = {number = 0, string = 0x0, str = {s = 0x0, len = 0}, data = 0x0, attr = 0x0, select = 0x0}}} __FUNCTION__ = "do_action" #7 0x000000000041c5c5 in run_actions (h=0x7fffe1b8f710, a=0x7fb2bf8313a0, msg=0x7fb2bf8c7a00) at action.c:1573 t = <optimized out> ret = <optimized out> mod = <optimized out> ms = 0 __FUNCTION__ = "run_actions" #8 0x000000000041d92e in do_action (h=0x7fffe1b8f710, a=0x7fb2bf8396d0, msg=0x7fb2bf8c7a00) at action.c:1065 ret = 1 v = 1 dst = {send_sock = 0x0, to = {s = {sa_family = 0, sa_data = "\000\000\001\000\000\000\000\000\000\000\000\000\000"}, sin = {sin_family = 0, sin_port = 0, sin_addr = {s_addr = 1}, sin_zero = "\000\000\000\000\000\000\000"}, sin6 = { sin6_family = 0, sin6_port = 0, sin6_flowinfo = 1, sin6_addr = {__in6_u = { __u6_addr8 = "\000\000\000\000\000\000\000\000\001\000\000\000\000\000\000", __u6_addr16 = {0, 0, 0, 0, 1, 0, 0, 0}, __u6_addr32 = {0, 0, 1, 0}}}, sin6_scope_id = 0}}, id = 0, proto = -80 '\260', send_flags = {f = 188 '\274', blst_imask = 3 '\003'}} tmp = <optimized out> new_uri = <optimized out> end = <optimized out> crt = <optimized out> cmd = <optimized out> len = <optimized out> user = <optimized out> uri = {user = {s = 0x3635353531000002 <Address 0x3635353531000002 out of bounds>, len = 1}, passwd = { s = 0x0, len = 17022128}, host = {s = 0x7fffe1b8f460 "/", len = 0}, port = { s = 0x3000000010 <Address 0x3000000010 out of bounds>, len = -507972528}, params = { s = 0x7fffe1b8f390 "\260\337\373\277\262\177", len = -1076936721}, sip_params = { s = 0xa2 <Address 0xa2 out of bounds>, len = -1114690816}, headers = { s = 0x1c0000002f <Address 0x1c0000002f out of bounds>, len = 7}, port_no = 10, proto = 0, type = 113, flags = URI_SIP_USER_PHONE, transport = {s = 0x0, len = -18000}, ttl = {s = 0x1017a30 "EST", len = -1076935806}, user_param = {s = 0x7fb2b5531d90 "P\213\065\265\262\177", len = 48}, maddr = { s = 0x3734e1b8f3b8 <Address 0x3734e1b8f3b8 out of bounds>, len = -507972896}, method = { s = 0x3531320000000002 <Address 0x3531320000000002 out of bounds>, len = -1076363582}, lr = { s = 0x103bcbc "07:28:47 /usr/local/sbin/kamailio[15556]: DEBUG: dialog [dlg_hash.c:602]: dlg_lookup(): dialog id=7094 found on entry 2049\n", len = 17022140}, r2 = {s = 0x7fb2bffbb3c0 "", len = 7}, gr = { s = 0x3000000018 <Address 0x3000000018 out of bounds>, len = -507972048}, transport_val = { s = 0x7fffe1b8f570 "\001", len = 8187}, ttl_val = {s = 0x2 <Address 0x2 out of bounds>, len = 1}, user_param_val = {s = 0x1 <Address 0x1 out of bounds>, len = 0}, maddr_val = { s = 0xffffffffffffffa0 <Address 0xffffffffffffffa0 out of bounds>, len = 17022112}, method_val = { s = 0x7fb2bffbd720 "", len = 8208}, lr_val = {s = 0x2010 <Address 0x2010 out of bounds>, len = 17030320}, r2_val = {s = 0x2010 <Address 0x2010 out of bounds>, len = -1077387804}, gr_val = { s = 0x7fb2bffbdfb0 "0z\001\001", len = -1077164088}} next_hop = {user = {s = 0x7fb2bffbd720 "", len = 8180}, passwd = { s = 0x3635353531000002 <Address 0x3635353531000002 out of bounds>, len = 17022112}, host = {s = 0x0, len = -1077381378}, port = {s = 0x7fffe1b8f5f0 "", len = 0}, params = { s = 0x3000000010 <Address 0x3000000010 out of bounds>, len = -507972128}, sip_params = { s = 0x7fffe1b8f520 "\002", len = -1077164088}, headers = {s = 0x0, len = 8180}, port_no = 2, proto = 12544, type = 909456693, flags = 17022128, transport = {s = 0x0, len = 1}, ttl = { s = 0x7fffe1b8f650 "0\313\031\265\262\177", len = 0}, user_param = { s = 0x3000000010 <Address 0x3000000010 out of bounds>, len = -507972032}, maddr = { s = 0x7fffe1b8f580 "\001", len = 6526864}, method = { s = 0x37340000002f <Address 0x37340000002f out of bounds>, len = 7}, lr = { s = 0x320000710000000a <Address 0x320000710000000a out of bounds>, len = -1076363582}, r2 = { s = 0x103bcbc "07:28:47 /usr/local/sbin/kamailio[15556]: DEBUG: dialog [dlg_hash.c:602]: dlg_lookup(): dialog id=7094 found on entry 2049\n", len = 17022140}, gr = {s = 0x7fb2bffbb3c0 "", len = 7}, transport_val = { s = 0x3000000018 <Address 0x3000000018 out of bounds>, len = -507971648}, ttl_val = { s = 0x7fffe1b8f700 "0\313\031\265\262\177", len = 8187}, user_param_val = { s = 0x373400000002 <Address 0x373400000002 out of bounds>, len = 1}, maddr_val = { s = 0x1 <Address 0x1 out of bounds>, len = -1076363582}, method_val = { s = 0x103bcbc "07:28:47 /usr/local/sbin/kamailio[15556]: DEBUG: dialog [dlg_hash.c:602]: dlg_lookup(): dialog id=7094 found on entry 2049\n", len = 17022140}, lr_val = {s = 0x7fb2bffbb3c0 "", len = 7}, r2_val = { s = 0x3000000018 <Address 0x3000000018 out of bounds>, len = -507971552}, gr_val = { s = 0x7fffe1b8f760 "", len = 8187}} u = <optimized out> port = <optimized out> dst_host = <optimized out> i = <optimized out> flags = <optimized out> avp = <optimized out> st = {flags = 2, id = 0, name = {n = 1, s = {s = 0x1 <Address 0x1 out of bounds>, len = 1}, re = 0x1}, avp = 0x0} sct = <optimized out> sjt = <optimized out> rve = <optimized out> mct = <optimized out> rv = <optimized out> rv1 = <optimized out> c1 = {cache_type = 137, val_type = RV_NONE, c = {avp_val = {n = 17022112, s = {s = 0x103bca0 "`\002", len = 160}, re = 0x103bca0}, pval = {rs = {s = 0x103bca0 "`\002", len = 160}, ri = -1077381378, flags = 32690}}, i2s = " \327\373\277\262\177\000\000\000\000\000\000\001\000\000\000\340\366\270\341\377\177"} s = {s = 0xffffffffffffffa0 <Address 0xffffffffffffffa0 out of bounds>, len = 17022112} srevp = {0x7fb2bffbd720, 0x2010} mod_f_params = {{type = NOSUBTYPE, u = {number = 0, string = 0x0, str = {s = 0x0, len = 0}, data = 0x0, attr = 0x0, select = 0x0}}, {type = NOSUBTYPE, u = {number = 0, string = 0x0, str = {s = 0x0, len = 0}, data = 0x0, attr = 0x0, select = 0x0}}, {type = NOSUBTYPE, u = {number = 0, string = 0x0, str = {s = 0x0, len = 0}, data = 0x0, attr = 0x0, select = 0x0}}, {type = NOSUBTYPE, u = {number = 0, string = 0x0, str = {s = 0x0, len = 0}, data = 0x0, attr = 0x0, select = 0x0}}, { type = NOSUBTYPE, u = {number = 0, string = 0x0, str = {s = 0x0, len = 0}, data = 0x0, attr = 0x0, select = 0x0}}, {type = NOSUBTYPE, u = {number = 0, string = 0x0, str = {s = 0x0, len = 0}, data = 0x0, attr = 0x0, select = 0x0}}, {type = NOSUBTYPE, u = {number = 0, string = 0x0, str = { s = 0x0, len = 0}, data = 0x0, attr = 0x0, select = 0x0}}, {type = NOSUBTYPE, u = {number = 0, string = 0x0, str = {s = 0x0, len = 0}, data = 0x0, attr = 0x0, select = 0x0}}} __FUNCTION__ = "do_action" #9 0x000000000041c5c5 in run_actions (h=0x7fffe1b8f710, a=0x7fb2bf82d4c0, msg=0x7fb2bf8c7a00) at action.c:1573 t = <optimized out> ret = <optimized out> mod = <optimized out> ms = 0#0 qm_detach_free (frag=0x7fb2b552e2b0, qm=<optimized out>) at mem/q_malloc.c:269 prev = 0x7fb2b5192058 next = 0x0 ... cut .... Kelvin Chua On Tue, Nov 19, 2013 at 9:40 PM, Daniel-Constantin Mierla <miconda(a)gmail.com > wrote: > Hello, > > can you get the output for 'bt full'? Probably you have to install the > debug symbols (kamailio-dbg package) for getting something useful. > > Another question, can you reproduce it? Or it happens sporadically? > > Cheers, > Daniel > > > > > On 11/19/13 1:11 PM, Kelvin Chua wrote: > > kamailio 4.0.4 > has anybody experience this using dialog module? > > backtrace: > #0 0x000000000057af45 in qm_malloc () > #1 0x00007f268ac0fe93 in set_dlg_variable_unsafe () from > /usr/local/lib64/kamailio/modules/dialog.so > #2 0x00007f268ac123aa in pv_set_dlg_variable () from > /usr/local/lib64/kamailio/modules/dialog.so > #3 0x000000000047be59 in lval_assign () > #4 0x000000000041cf14 in do_action () > #5 0x000000000041c5c5 in run_actions () > #6 0x000000000041d92e in do_action () > #7 0x000000000041c5c5 in run_actions () > #8 0x0000000000425250 in run_top_route () > #9 0x00000000004bfcce in receive_msg () > #10 0x000000000056a2df in udp_rcv_loop () > #11 0x0000000000481b43 in main_loop () > #12 0x000000000041c081 in main () > > logfile: > DEBUG: <core> [parser/msg_parser.c:623]: parse_msg(): SIP Request: > DEBUG: <core> [parser/msg_parser.c:625]: parse_msg(): method: <ACK> > DEBUG: <core> [parser/msg_parser.c:627]: parse_msg(): uri: > <sip:+1XX882XX111@2XX.XX1.X9.2X> > DEBUG: <core> [parser/msg_parser.c:629]: parse_msg(): version: <SIP/2.0> > DEBUG: <core> [parser/parse_via.c:1284]: parse_via_param(): Found param > type 232, <branch> = <z9hG4bKe97b.5a4397f3.0>; state=16 > DEBUG: <core> [parser/parse_via.c:2672]: parse_via(): end of header > reached, state=5 > DEBUG: <core> [parser/msg_parser.c:513]: parse_headers(): parse_headers: > Via found, flags=2 > DEBUG: <core> [parser/msg_parser.c:515]: parse_headers(): parse_headers: > this is the first via > DEBUG: <core> [receive.c:151]: receive_msg(): After parse_msg... > DEBUG: <core> [receive.c:192]: receive_msg(): preparing to run routing > scripts... > DEBUG: <core> [parser/parse_to.c:176]: parse_to_param(): DEBUG: add_param: > tag=bbd932f8f9dbf9743f9b7cadcbf622ac.0dc7 > DEBUG: <core> [parser/parse_to.c:799]: parse_to(): end of header reached, > state=29 > DEBUG: <core> [parser/msg_parser.c:190]: get_hdr_field(): DEBUG: > get_hdr_field: <To> [74]; uri=[sip:+1XX882XX111@6X.X31.X.8X] > DEBUG: <core> [parser/msg_parser.c:192]: get_hdr_field(): DEBUG: to body [ > <sip:+1XX882XX111@6X.X31.X.8X>] > DEBUG: sl [sl_funcs.c:415]: sl_filter_ACK(): SL local ACK found -> > dropping it! > DEBUG: <core> [usr_avp.c:644]: destroy_avp_list(): DEBUG:destroy_avp_list: > destroying list (nil) > last message repeated 5 times > DEBUG: <core> [xavp.c:447]: xavp_destroy_list(): destroying xavp list (nil) > DEBUG: <core> [receive.c:295]: receive_msg(): receive_msg: cleaning up > segfault at 0 ip 000000000057af45 sp 00007fff30e44ac0 error 4 in > kamailio[400000+27c000] > > Kelvin Chua > > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > > > -- > Daniel-Constantin Mierla - http://www.asipto.comhttp://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda > Kamailio Advanced Trainings - Berlin, Nov 25-28 > - more details about Kamailio trainings at http://www.asipto.com - > > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users(a)lists.sip-router.org > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > >

10 years, 5 months

kamailio 4.0.4 package for ubuntu

by Freddy Andersen

I’m currently running Kamailio 4.0.3 in production and think I’m hitting bugs that looks like they are fixed in 4.0.4 but deb.kamailio.org does not have 4.0.4 yet? Any timeline when this will get released? -- - Freddy

10 years, 5 months

ubuntu package for kamailio 4.0.4

by Freddy Andersen

10 years, 5 months

Kamailio returns "405 Method Not Allowed" for SIP MESSAGE request

by Karthikeyan R

Is Kamailio supports SIP MESSAGE request? Please let me know how to configure. Regards, Karthikeyan R DISCLAIMER: This email message and all attachments are confidential and may contain information that is Privileged, Confidential or exempt from disclosure under applicable law. If you are not the intended recipient, you are notified that any dissemination, distribution or copying of this email is strictly prohibited. If you have received this email in error, please notify us immediately by return email to mailadmin(a)spanservices.com and destroy the original message. Opinions, conclusions and other information in this message that do not relate to the official of SPAN, shall be understood to be nether given nor endorsed by SPAN.

10 years, 5 months

siptrace & sipcapture - write to multiple tables

by Grant Bagdasarian

Hello, Is it possible to have the sipcapture module write the duplicated messages to multiple tables? If not, is it possible to have the siptrace module duplicate the message to multiple Sip Capture instances? Regards, Grant

10 years, 5 months

add carrier

by Joli Martinez

Hello, I have Kamailio installed as an SBC with Freeswitch. I would like to add a SIP trunk to Kamailio. Is there any documentation on how to do this? Also, is it recommended to add trunks to Kamailio vs Freeswitch if so why? Thanks

10 years, 5 months

by Karthikeyan R

Hi All, I'm trying to configure the Kamailio Server (V 4.0.3) as Registrar with OverSIP server (V 1.4.1) as a Proxy for my WebRTC client; While calling UserB from UserA, the Kamailio is trying to find the UserB using address from Via address in UserB's REGISTER request; I'm also using GRUU and enabled the same in configuration file. Can someone help me what's wrong in my configuration / is Kamailio requires any additional settings to resolve this issue? Attached Files.zip contains the following files: OverSip-Kamailio.pcapng - Contains the packet capture between the OverSIP and Kamailio Servers. Kamailio-Logs.txt - Shows the error message that Kamailio is trying to resolve address and it's failed. User-records.txt - Output of "kamctl ul show". Kamailio.cfg - Configuration file for Kamailio. Note: I have configured MySQL as DBENGINE, but haven't created any DB tables. Thanks in Advance, Karthikeyan R DISCLAIMER: This email message and all attachments are confidential and may contain information that is Privileged, Confidential or exempt from disclosure under applicable law. If you are not the intended recipient, you are notified that any dissemination, distribution or copying of this email is strictly prohibited. If you have received this email in error, please notify us immediately by return email to mailadmin(a)spanservices.com and destroy the original message. Opinions, conclusions and other information in this message that do not relate to the official of SPAN, shall be understood to be nether given nor endorsed by SPAN.

10 years, 5 months

Problem with 4.0 nightlies and IMS - sem_post undefined

by Barry Flanagan

Hi I am trying to run the Ubuntu nightlies from http://deb.kamailio.org/kamailiodev-nightly and loading the p-cscf config files. Things were working fine while I was on the 20130110 nightlies, but when I upgraded to 20130122 I get the following errors. Any have an idea why sem_post is undefined and how to fix this? 0(1980) ERROR: <core> [sr_module.c:572]: ERROR: load_module: could not open module </usr/lib64/kamailio/modules/ims_registrar_pcscf.so>: /usr/lib64/kamailio/modules/ims_registrar_pcscf.so: undefined symbol: sem_post 0(1980) ERROR: <core> [sr_module.c:572]: ERROR: load_module: could not open module </usr/lib64/kamailio/modules/cdp.so>: /usr/lib64/kamailio/modules/cdp.so: undefined symbol: sem_post 0(1980) ERROR: <core> [sr_module.c:572]: ERROR: load_module: could not open module </usr/lib64/kamailio/modules/ims_qos.so>: /usr/lib64/kamailio/modules/ims_qos.so: undefined symbol: sem_post Thanks -Barry Flanagan

10 years, 5 months

append_hf to CANCEL

by Grant Bagdasarian

Hello, I'm executing the following code for both the BYE and CANCEL in request_route: if (is_method("BYE|CANCEL")) { #finished $var(finished) = $TS; append_hf("X-Finished: $var(finished)\r\n"); } For some reason, the X-Finished header is appended to the BYE, but not the CANCEL. The CANCEL is forwarded further. I have the setflag(22); set, so all outbound messages are sent to the Capture server. Does append_hf not work for CANCEL requests?

10 years, 5 months

← Newer
1
2
3
4
5
6
7
8
9
...
16
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users November 2013