sr-users September 2012

sr-users@lists.kamailio.org

78 participants
139 discussions

Kamailio and SylkServer
by Gary Shergill 25 Sep '12

25 Sep '12

Hi Kamailio Community, I was wondering how I would integrate Kamailio into SylkServer please? The SIP IM/presence part of Kamailio that is. When I was attempting to get the Presence and IM working I received the following reply; =================== > If you use sylkserver, then you can just forward the >INVITE to sylkserver, which has an MSRP relay integrated, =================== I'm not entirely sure what that means, but I found the following which I believe relates to it; http://sylkserver.ag-projects.com/projects/sylkserver/wiki/Applications I'm not entirely sure if; a) this is the right thing I'm looking at, b) where I would add these lines to Kamailio. Thanks for any help you can provide. Kind Regards, Gary Shergill

1 1

Asterisk and Dispatcher Module
by Ian French 25 Sep '12

25 Sep '12

Hi, I've been working my way throught this tutorial ( http://kb.asipto.com/asterisk:realtime:kamailio-3.0.x-asterisk-1.6.2-astdb) and all it working well thanks. In the other benifits section you mention that this configuration can be used with multiple instances of Asterisk. Could you elaborate a little on this?? Is this achieved using the Dispatcher module? I'm trying to get this working with two instances of Asterisk but I can figure out how to specifc multiple asterisk servers as oppossed to the single. asterisk.bindip = "192.168.178.23" desc "Asterisk IP Address" asterisk.bindport = "5080" desc "Asterisk Port" Thanks in advance Ian

2 1

Re: [SR-Users] is kamilio support RFC5626 now ?
by Peter Dunkley 25 Sep '12

25 Sep '12

Hi, I have been working on adding full RFC5626 support to Kamailio in my spare time - but it is taking longer than I hoped because I haven't been able to spend as much time as I wanted working on it. There is a branch in git (pd/outbound) where I have put some of the module skeleton code, and I still hope to get this done and tested well before the end of the year (and certainly in time for Kamailo 3.4). Regards, Peter Daniel-Constantin Mierla <miconda(a)gmail.com> wrote: >_______________________________________________ >SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list >sr-users(a)lists.sip-router.org >http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

1 0

Starting kamailio. Error on topoh module
by Miguel Baptista 25 Sep '12

25 Sep '12

Hello, I am testing the "topology hiding" module (topoh) on kamailio-3.2.0 and every-time I start kamailio I get these error messages related with the topoh module: Sep 20 16:51:14 trd-sgw1 /usr/proxy/kamailio/sbin/kamailio[31768]: ERROR: topoh [th_mask.c:79]: +++ ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789.- Sep 20 16:51:14 trd-sgw1 /usr/proxy/kamailio/sbin/kamailio[31768]: ERROR: topoh [th_mask.c:80]: +++ y0GxFtSUVeTOMWzHPam.jKR93gCoNpkicrJBqIEhvYbnd175AfLl4u6wZs-X8Q2D I am only getting those errors when kamailio is starting. Kamailio runs fine and it hides my internal topology, on the SIP Headers, without any error message. I tried to add/modify/remove several topoh parameters but I am always getting those errors starting kamailio. Any idea why I getting it? How can I get rid of it? I don't feel comfortable to apply that configuration on my production servers knowing that kamailio outputs an error when starting. Thanks, - Miguel Baptista

2 3

Dialog Module : "inconsitent dlg timer data"
by Ricardo Martinez 25 Sep '12

25 Sep '12

Hello. Can someone explain to me why i’m getting this error : WARNING: dialog [dlg_req_within.c:173]: inconsitent dlg timer data on dlg 0xb565c500 [2166:2082643875] with clid ' 5ed68b60-fdbe-4aa7-819e-0002a400e27c(a)64.76.155.86' and tags '5e604a9ea4' 'ed505c1da4' This is the output for dlg_list_ctx kamctl fifo dlg_list_ctx dialog:: hash=2995:55475986 state:: 4 ref_count:: 2 timestart:: 1348177242 timeout:: 15084496 callid:: 33d68b60-a09a-b1dc-8198-0002a400e27c(a)64.76.155.86 from_uri:: sip:557100050994@64.76.155.86 from_tag:: 3360b198a4 caller_contact:: sip:557100050994@64.76.155.86 caller_cseq:: 226 caller_route_set:: caller_bind_addr:: udp:64.76.155.82:5060 callee_bind_addr:: udp:64.76.155.82:5060 to_uri:: sip:0267005622408596@64.76.155.82 to_tag:: ba507815a4 callee_contact:: sip:0267005622408596@64.76.155.130 callee_cseq:: 226 callee_route_set:: context:: I can’t find the problem. I’m using this dialog params : # ---- dialog params ------ modparam("dialog", "dlg_flag", 31) modparam("dialog", "profiles_with_value","gwid" ) modparam("dialog", "default_timeout",7200) modparam("dialog", "timeout_avp", "$avp(i:10)") modparam("dialog", "dlg_match_mode", 1) $avp(i:10)=10 $dlg_ctx(timeout_bye) = 4; dlg_manage(); Regards, Ricardo

2 3

kamailio workers and private memory
by Uri Shacked 25 Sep '12

25 Sep '12

Hi, I use "kamctl sercmd pkg.stats" to check the private memory status. I notice that the workers for the proccess "slow timer", "timer", "MI FIFO", use a lot of memory. My system configuration does "mt_reload" for around 5 million lines every hour, it looks like in time, the pkg memory of the workers above is growing...... I set the private memory to 16M instead of 4M. Now the used size (after 3 weeks) is 4M. I will upgrade to 3.3.0 soon and will use mem_join=1, will it help the private memory defrag as well? How can I increase the number of workers for these processes? Will it help increasing it if possible? BR, Uri

2 1

Issue Starting up Kamalio.
by Jay chary 24 Sep '12

24 Sep '12

Hi We are trying to install Kamailio v3.3.1 on CENTOS, I followed the below urls for installation http://kb.asipto.com/asterisk:realtime:kamailio-3.0.x-asterisk-1.6.2-astdb Howeever when I try to start Kamailio by issuing kamctl start , I see the below response : INFO: Starting Kamailio : ERROR: PID file /var/run/kamailio.pid does not exist -- Kamailio start failed and I see the below in the messages log : Sep 20 10:08:49 kamailio kamailio: INFO: <core> [tcp_main.c:4829]: init_tcp: using epoll_lt as the io watch method (auto detected) Sep 20 10:08:49 kamailio /usr/local/sbin/kamailio[21533]: INFO: usrloc [hslot.c:53]: locks array size 512 Sep 20 10:08:49 kamailio /usr/local/sbin/kamailio[21533]: INFO: auth [auth_mod.c:329]: auth: qop set, but nonce-count (nc_enabled) support disabled Sep 20 10:08:52 kamailio /usr/local/sbin/kamailio[21533]: ERROR: auth_db [authdb_mod.c:244]: empty parameter 1 not allowed Sep 20 10:08:52 kamailio /usr/local/sbin/kamailio[21533]: ERROR: <core> [route.c:1216]: fixing failed (code=-1) at cfg:/usr/local/etc/kamailio//kamailio.cfg:543 Sep 20 10:08:52 kamailio /usr/local/sbin/kamailio[21533]: ERROR: <core> [route.c:1216]: fixing failed (code=-1) at cfg:/usr/local/etc/kamailio//kamailio.cfg:552 Sep 20 10:08:52 kamailio /usr/local/sbin/kamailio[21533]: ERROR: <core> [route.c:1216]: fixing failed (code=-1) at cfg:/usr/local/etc/kamailio//kamailio.cfg:585 Sep 20 10:09:30 kamailio avahi-daemon[2760]: Invalid query packet. Can u please help us ? Regards Chary

3 2

Kamailio presentations
by Pavel Segeč 24 Sep '12

24 Sep '12

Hello Everybody, I'm an university teacher and founder of the nil.uniza.sk portal with some SIP/Kamailio tutorials. I'd like to use the Kamailio server as the basement for my class lecturers about the IP multimedia communication systems. May anyone help me and provide a link to usable presentation about the kamailio, which should I use and probably extend in my classes? I search the web but nothing appropriate have not found thanks palo73

1 0

Re: [SR-Users] xcap server support for org.openmobilealliance.xcap-directory
by Peter Dunkley 23 Sep '12

23 Sep '12

Hi, org.openmobilealliance.xcap-directory isn't supported by the xcap-server module. Adding support for this shouldn't be difficult though. Regards, Peter Juha Heinanen <jh(a)tutpro.com> wrote: >in xcap module readme there is an example xcap server config file and it >does not include in xcap-caps aiud >org.openmobilealliance.xcap-directory. does it mean that xcap-directory >application is not currently supported or could the aiud just be added >there? > >-- juha > >_______________________________________________ >SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list >sr-users(a)lists.sip-router.org >http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

2 3

xcap server support for org.openmobilealliance.xcap-directory
by Juha Heinanen 22 Sep '12

22 Sep '12

in xcap module readme there is an example xcap server config file and it does not include in xcap-caps aiud org.openmobilealliance.xcap-directory. does it mean that xcap-directory application is not currently supported or could the aiud just be added there? -- juha

1 0

← Newer
1
2
3
4
5
6
7
8
...
14
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users September 2012