sr-users September 2012

sr-users@lists.kamailio.org

78 participants
138 discussions

by Tayeb Meftah

hi everyone, can someone show me how to save cdr's into db ? i enabled acc in the default config but still no cdr in the acc table thank you -- Tayeb Meftah General director Voice of the blind ™ broadcast freedom http://www.vobradio.org/ Phones: Algeria: +213-660-347746 UK, London: +442032983627 USA, NewYork: +1(347)759-5883 iNum: +883510001288000 we're blind, but not deaf!

11 years, 6 months

Locate UA in usrloc table

by Vitaliy Aleksandrov

Hi all. Is there any easy method to find if somebody with $si:$sp is registered (usrloc->received.ip == $si, usrloc->received.port == $sp) ? reg_fetch_contacts uses uri as search key, but in my case I don't have it. The only way I know is to write a module that will use "get_all_ucontacts" function exported by usrloc module in its API.

11 years, 6 months

FreeSWITCH | Kamailio MWI forwarding

by Tayeb Meftah

hello we're using Kamailio / freeswitch freeswitch is the Voicemail server now. please how to forward MWI bethwan kamailio and Freeswitch? if user 1000 have a vm i want kamailio to fetch it from FS and advertise it to the subscriber thank you -- Tayeb Meftah General director Voice of the blind ™ broadcast freedom http://www.vobradio.org/ Phones: Algeria: +213-660-347746 UK, London: +442032983627 USA, NewYork: +1(347)759-5883 iNum: +883510001288000 we're blind, but not deaf!

11 years, 6 months

Error starting kamailio with dialog module usage

by Aft nix

Hi, After implementing a "Call limit" application with the following config: #!ifdef WITH_CALL_LIMIT modparam("dialog","enable_stats",1) modparam("dialog","dlg_flag", 4) modparam("dialog","hash_size", 4096) modparam("dialog", "profiles_with_value","callquota") modparam("dialog", "default_timeout", 300) modparam("dialog", "dlg_match_mode", 2) modparam("dialog", "detect_spirals", 1) modparam("dialog", "db_mode", 0) #!endif request_route { ................ #!ifdef WITH_CALL_LIMIT if (is_method("INVITE")) { dlg_manage(); $var(100) = 0; get_profile_size("callquota", "$rU", "var(100)"); if ($var(100) >= 5 ) { xlog("DEBUG: Simultaneous calls limit reached"); sl_send_reply("503","Simultaneous calls limit reached"); exit; } set_dlg_profile("callquota","$ru"); if (get_profile_size("callquota", "$var(100)")) { xlog("DEBUG: there are $var(100) total calls for $rU\n"); } } #!endif ............... } Now it passes cleanly when i issue : $kamailio -c but it fails to start with following info: Sep 29 19:37:49 108 /usr/local/sbin/kamailio[1865]: ERROR: <core> [route.c:1216]: fixing failed (code=-1) at cfg:/usr/local/etc/kamailio/kamailio.cfg:507 Sep 29 19:37:49 108 /usr/local/sbin/kamailio[1865]: ERROR: <core> [route.c:1216]: fixing failed (code=-1) at cfg:/usr/local/etc/kamailio/kamailio.cfg:523 line 507 : get_profile_size("callquota", "$rU", "var(100)"); Thanks in advance -- -aft

11 years, 6 months

kamailio core at qm_status

by Jijo

Hi All, I'm observing a core intermittently at "qm_status (qm=0x786cd000) at mem/q_malloc.c:763" for kamailio version 3.1.0 looking at the backtrace this is occurring while doing a tcp buffer overrun. Please have a look and let me know if anyone observed this issue or how can we debug it. Please find the backtrace and kamailio version osbprod-V2R0:~ # /usr/sbin/kamailio -V version: kamailio 3.1.0 (i386/linux) 21a375 flags: STATS: Off, USE_IPV6, USE_TCP, USE_TLS, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, DBG_QM_MALLOC, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535, PKG_SIZE 15MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: 21a375 compiled on 12:38:44 Apr 26 2012 with gcc 4.5.0 #0 qm_status (qm=0x786cd000) at mem/q_malloc.c:763 #1 0x0819c0f3 in qm_debug_frag (qm=0x786cd000, f=<value optimized out>) at mem/q_malloc.c:167 #2 0x0819c352 in qm_free (qm=0x786cd000, p=0x7a6cb6ac, file=0x821cce2 "<core>: tcp_main.c", func=0x822285f "wbufq_run", line=880) at mem/q_malloc.c:457 #3 0x0815f686 in wbufq_run (tcpconn=0x7a1a7548, ev=4, fd_i=-1) at tcp_main.c:880 #4 handle_tcpconn_ev (tcpconn=0x7a1a7548, ev=4, fd_i=-1) at tcp_main.c:4141 #5 0x08169bf2 in io_wait_loop_epoll () at io_wait.h:1092 #6 tcp_main_loop () at tcp_main.c:4606 #7 0x080b0404 in main_loop () at main.c:1655 #8 0x080b1f84 in main (argc=9, argv=0xbfb4c9f4) at main.c:2446 (gdb) l 758 LOG_(DEFAULT_FACILITY, memlog, "qm_status: ", 759 "dumping free list stats :\n"); 760 for(h=0,i=0;h<QM_HASH_SIZE;h++){ 761 unused=0; 762 for (f=qm->free_hash[h].head.u.nxt_free,j=0; 763 f!=&(qm->free_hash[h].head); f=f->u.nxt_free, i++, j++){ 764 if (!FRAG_WAS_USED(f)){ 765 unused++; 766 #ifdef DBG_QM_MALLOC 767 LOG_(DEFAULT_FACILITY, memlog, "qm_status: ",

11 years, 6 months

Registration Authentication Error

by Nathaniel L Keeling III

Hello, we are testing the new version of Kamailio, 3.3 and are getting authentication error when trying to register a sip account. We have a db backend in which we used kamctl to add the user to the db. We are using the kamailio.cfg script created during the install with changes for our environment. Is there some other changes required besides the normal. I can see in the logs where everything looks ok except for when it compares the calculated values. I have doubled check the subscriber table and password but to no avail. 11(28548) DEBUG: db_postgres [km_dbase.c:393]: PQclear(1008b8560) result set 11(28548) DEBUG: auth_db [authorize.c:124]: HA1 string calculated: e13d569284e76a33ca63e4d6203f844a 11(28548) DEBUG: auth [api.c:211]: check_response: Our result = '18210b5da2b3d27e6ba50977072599ea' 11(28548) DEBUG: auth [api.c:221]: check_response: Authorization failed Thanks Nathaniel

11 years, 6 months

Kamailio 3.3 presence with resource lists and integrated XCAP

by Sangeeta Shah

Hello All, I am trying to configure Kamailio v 3.3 to serve as a presence server with resource lists and integrated XCAP. I followed the respective module documentation and am trying to test with the Boghe IMS client. I just can't get it to work! I think I still don't have everything I need in the config file to handle the xcap documents. Attached is the debug log from the server. If someone has had luck setting up the presence server with integrated xcap and resource lists please take a few minutes to take a look at the log file and see if you can help me out. I am also posting the xcap portion of the config file: #!ifdef WITH_XCAPSRV ##!define WITH_XHTTPAUTH event_route[xhttp:request] { xdbg("===== xhttp: request [$rv] $rm => $hu\n"); #!ifdef WITH_XHTTPAUTH if (!www_authorize("10.50.251.12", "subscriber")) { www_challenge("10.50.251.12", "0"); exit; } #!endif if($hu=~"^/xcap-root/") { set_reply_close(); set_reply_no_connect(); # xcap ops $xcapuri(u=>data) = $hu; if($xcapuri(u=>xuid)=~"^sip:.+@.+") $var(uri) = $xcapuri(u=>xuid); else if($xcapuri(u=>xuid)=~".+@.+") $var(uri) = "sip:" + $xcapuri(u=>xuid); else $var(uri) = "sip:"+ $xcapuri(u=>xuid) + "@" + $Ri; xlog("===== xhttp: $xcapuri(u=>auid) : $xcapuri(u=>xuid)\n"); if($xcapuri(u=>auid)=="xcap-caps") { $var(xbody) = "<?xml version='1.0' encoding='UTF-8'?> <xcap-caps xmlns='urn:ietf:params:xml:ns:xcap-caps'> <auids> <auid>rls-services</auid> <auid>pidf-manipulation</auid> <auid>xcap-caps</auid> <auid>pres-rules</auid> </auids> <extensions> </extensions> <namespaces> <namespace>urn:ietf:params:xml:ns:rls-services</namespace> <namespace>urn:ietf:params:xml:ns:pidf</namespace> <namespace>urn:ietf:params:xml:ns:xcap-caps</namespace> <namespace>urn:ietf:params:xml:ns:pres-rules</namespace> </namespaces> </xcap-caps>"; xhttp_reply("200", "ok", "application/xcap-caps+xml", "$var(xbody)"); exit; } #!ifdef WITH_XHTTPAUTH # be sure auth user access only its documents if ($au!=$(var(uri){uri.user})) { xhttp_reply("403", "Forbidden", "text/html", "<html><body>$si:$sp</body></html>"); exit; } #!endif switch($rm) { case "PUT": #xcaps_put("$var(uri)", "$hu", "$rb"); #if($xcapuri(u=>auid)=~"pres-rules") #{ # xlog("===== xhttp put: refreshing watchers for $var(uri)\n"); # pres_update_watchers("$var(uri)", "presence"); # pres_refresh_watchers("$var(uri)", "presence", 1); #} xcaps_put("$var(uri)", "$var(doc_uri)", "$rb"); if($xcapuri(u=>auid)=~"pres-rules") { pres_update_watchers("$var(uri)", "presence"); pres_refresh_watchers("$var(uri)", "presence", 1); } else if ($xcapuri(u=>auid)=~"resource-lists" || $xcapuri(u=>auid)=~"rls-services") { rls_update_subs("$var(uri)", "presence"); } exit; break; case "GET": xlog("===== xhttp: get $var(uri) => $hu\n"); xcaps_get("$var(uri)", "$hu"); exit; break; case "DELETE": xcaps_del("$var(uri)", "$hu"); if($xcapuri(u=>auid)=~"pres-rules") { xlog("===== xhttp del: refreshing watchers for $var(uri)\n"); pres_update_watchers("$var(uri)", "presence"); pres_refresh_watchers("$var(uri)", "presence", 1); } exit; break; } } # http ops xhttp_reply("200", "ok", "text/html", "<html><body>OK: $si:$sp</body></html>"); exit; } -- Sangeeta Shah

11 years, 7 months

DB accounting missing if t_newtran() is called explicitly

by Andrew Pogrebennyk

Hi, I have found recently that in order to detect retransmits I have to create a transaction explicitly when the request comes in: force_rport(); if(!t_check_trans()) t_newtran(); sl_send_reply("100", "Trying"); xlog("L_INFO", "New request - $ci\n"); it appears like there are carriers or UAs that do not honor the T1 retransmission interval retransmit the INVITE sooner than proxy creates a transaction in t_relay(). And since we are counting concurrent calls, we count the same call multiple times, which is not good. But with this patch we've faced another sporadic problem - if the transaction is created beforehand the accounting record is lost.. we use acc_db mode and set flag to account the transaction. And there are no errors in kamailio log but no insert into acc in mysql binlog either. I wasn't successful reproducing it in the lab systems with identical setup. Is anybody here perhaps aware of some limitation in acc module or callbacks which makes a transaction created beforehand not accountable? On a related note, it could make sense to create a transaction implicitly if dlg_manage() is called to avoid counting same call many times, I just don't know yet how common this issue is in real life.

11 years, 7 months

SRV record in via header not resolving.

by Jijo

Hello, I'm observing that Via Header domain name of type SRV is resolving as DNS A. I looked at the code and it does support only A. It is basically setting to default SIP port check_via_address which is causing DNS A query. Is there any specific reason to do so? I changed the code to support SRV as below and working fine. static int check_via_address(struct ip_addr* ip, str *name, unsigned short port, *short proto*, int resolver) { : : //if (port==0) port=SIP_PORT; if (resolver&DO_DNS){ DBG("check_via_address: doing dns lookup\n"); /* try all names ips */ he=sip_resolvehost(name, &port, *(char *) &proto*); /* don't use naptr */ if (he && ip->af==he->h_addrtype){ for(i=0;he && he->h_addr_list[i];i++){ if ( memcmp(&he->h_addr_list[i], ip->u.addr, ip->len)==0) return 0; } } } : : : } /* check if IP address in Via != source IP address of signaling */ int received_test( struct sip_msg *msg ) { int rcvd; rcvd=msg->via1->received || check_via_address(&msg->rcv.src_ip, &msg->via1->host, msg->via1->port,* msg->via1->proto*, received_dns); return rcvd; } Thanks Jijo

11 years, 7 months

Kamailio sip domain

by Burak ÖZTÜRK

Hi, What is the sip domain in kamctlrc file? Can I change it whatever I want? Is it must be a valid sip domain? Can I give a name like "mysipdomain.com", but there is no server with this name?

11 years, 7 months

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users September 2012