sr-users October 2012

sr-users@lists.kamailio.org

87 participants
164 discussions

moving all to kamailio namespace
by Daniel-Constantin Mierla 09 Oct '12

09 Oct '12

Hello, some bits were left with the old project name OpenSER, not to disturb too much at that time and see where everything goes. Other voices expressed same idea in the past, now everything is stable and development goes smooth, so it is good to make a decision because openser is too way back and new comers could be confused. In my list is renaming from openser to kamailio next attributes: - default database name (exiting configs should not be impacted that much as most of them have database provided by module parameter) - default database access usernames and passwords, respectively openser, openserro and openserrw should become kamailio, kamailioro and kamailiorw - perl module API is packed as OpenSER - this could affect some people using it, but a search and replace should do it - snmpstats mibs - probably it is going to have some impact as well Eventually we can start doing it gradually, one or two per release, but is probably better to do all at once, so people will do one upgrade with next major release. Another thing is sercmd, it is in conflict for packaging as both ser and kamailio install it. It means that one cannot install both kamailio and ser at same time from packages. One option is to install it as kamcmd. Because these changes affect users and devels, I sent the message to both mailing lists. Opinions? Cheers, Daniel -- Daniel-Constantin Mierla - http://www.asipto.com http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda Kamailio Advanced Training, Berlin, Nov 5-8, 2012 - http://asipto.com/u/kat Kamailio Advanced Training, Miami, USA, Nov 12-14, 2012 - http://asipto.com/u/katu

6 7

storing and using route-set in dialog module
by Klaus Darilion 09 Oct '12

09 Oct '12

Hi! Are there any means to store the route set of a dialog (on dialog creation) and use the stored route set when forwarding in-dialog requests instead of using the requests' route set? thanks Klaus

1 0

Force to use mediaproxy/rtpproxy
by Mino Haluz 09 Oct '12

09 Oct '12

Hi, I am doing some performance tests and I cannot force SIP INVITEs to use mediaproxy within LAN, without any NAT. I'm using engage_media_proxy or rtpproxy_manage but phones are still exchanging voice data between them, not through the proxy. Is there some trick how to forcibly tell kamailio to use media/rtp proxy ? Maybe kamailio finds out that there is no nat and therefore will not use any nat traversal mechanism. Mino

1 1

get $sht array of values
by Uri Shacked 09 Oct '12

09 Oct '12

Hi, If i have two keys on a HTABLE that are the same. i undestand i need to set the key type to 1 (array). i use the $shtcn and get 3 (size is an entry as well). so far, so good. But, now i am trying to get all the values from the table to an AVP oto say it in another way - i need all values because i parse it afterwards. So, what is the syntax? using $sht() didn't work..... Uri

2 1

kamailio cores on corrupted route header
by Jijo 09 Oct '12

09 Oct '12

Hello, kamailio cores when receives a corrupted route header. For example, this was causing the core. Route: sip:10.236.236.100;transport=tcp;r2=on;lr;ftag=1348218287134-Test-553188;osb-tag=NM;nat=yes;twan=yes?[=& [=<sip:10.236.236.100;transport=tcp;r2=on;lr;ftag=1348218287134-Test-553188;osb-tag=NM;nat=yes;twan=yes?[=&%20[=> I found the problem, the pointer was not initializing to null after freeing it. Please apply this fix in the next version. Here is the diff with the original(3.2.2) and changed version. PGA:/mnt/o/kamailio-3.2.2/parser # diff -u parse_param.c.orig parse_param.c --- parse_param.c.orig 2012-10-09 09:42:58.372003500 -0300 +++ parse_param.c 2012-10-09 21:34:14.556367900 -0300 @@ -545,6 +545,7 @@ error: if (t) pkg_free(t); free_params(*_p); + *_p = 0; return -2; ok: Thanks Jijo

1 0

Kamailio XMPP support
by Vijay Thakur 09 Oct '12

09 Oct '12

Dear All, I have set up my kamailio server successfully and it is working very fine. i have followed the below link for setup: http://kb.asipto.com/kamailio:presence:k31-made-simple. Now i want to enable xmpp module. At Kamailio wiki page, i have found that there can be two way to implement xmpp module in kamilio. And they are (1) Inside the server (2) Remoter jabber server. But there is no specific "how to" to enable this module. How can i compile and enable this module in kamailio. And after this what will be the setting of my kamailio.cfg. Currently jabberd2 is not available as directed in wiki. Can i use openfire with kamailio for xmpp? How ? Kindly point me any direction. With Warm Wishes, Vijay Thakur information intended for a specific individual and purpose, and is protected by law. If you are not the intended recipient, you should delete this message and are hereby notified that any disclosure, copying, or distribution of this message, or the taking of any action based on it, is strictly prohibited. -----------------------------------------------------------------------------------------------------------------

1 0

Kamailio XMPP Module Setup
by Vijay Thakur 09 Oct '12

09 Oct '12

1 0

Kamailio FAQ Week
by Daniel-Constantin Mierla 09 Oct '12

09 Oct '12

Hello, I'm looking at getting richer content for the FAQ wiki page: * http://www.kamailio.org/wiki/tutorials/faq/main Probably we can get it good enough with a bit of mobilization for one week. If anyone is having some questions fitting the purpose of the FAQ, just add them to the page or send via email. If you don't have the right answer, just leave it as TBA in the wiki, via email is fine to send just the question. Cheers, Daniel -- Daniel-Constantin Mierla - http://www.asipto.com http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda Kamailio Advanced Training, Berlin, Nov 5-8, 2012 - http://asipto.com/u/kat Kamailio Advanced Training, Miami, USA, Nov 12-14, 2012 - http://asipto.com/u/katu

1 0

Nginx dispatching of websocket requests?
by Juha Heinanen 09 Oct '12

09 Oct '12

peter suggested using nginx for dispatching xcap requests and that works fine. has someone tried using nginx to dispatch also sip over websocket requests? is there some drawbacks? -- juha

2 1

Kamailio issues errors
by Sangeeta Shah 08 Oct '12

08 Oct '12

I have Kamailio 3.3 with Presence, RLS and integrated XCAP. Now I am noticing the errors in the attached syslog capture. The only thing I have changes is the DB mode to DB Only. Thanks, Sangeeta -- Sangeeta Shah

1 0

← Newer
1
...
10
11
12
13
14
15
16
17
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users October 2012