sr-users August 2010

sr-users@lists.kamailio.org

47 participants
72 discussions

PDT ran out of pkg memory using pdt_list
by JR Richardson 10 Aug '10

10 Aug '10

Hi All, I loaded up the PDT database with about 35K records and when I issue the commad "kamctl fifo pdt_list" I get: 3(3018) ERROR: <core> [tree.c:139]: no more pkg mem 3(3018) ERROR: mi_fifo [fifo_fnc.c:509]: command (pdt_list) processing failed Searching around I found the http://www.kamailio.org/dokuwiki/doku.php/troubleshooting:memory which suggest I adjust the pkg mem size in config.h. In config.h, I found: /*used only if PKG_MALLOC is defined*/ #define PKG_MEM_POOL_SIZE 4*1024*1024 So is this what I am supposed to adjust? Maybe try: #define PKG_MEM_POOL_SIZE 4*2048*2048 or #define PKG_MEM_POOL_SIZE 8*1024*1024 Which one would be a logical adjustment? Also, is there a correlation between pkg mem and database record size as related to pdt_list? The idea is to have a few 100K records loaded in kamailio and be able to perform "kamctl fifo pdt_list | grep 512345" to show this prefix route. But without enough memory, doesn't work. Thanks. JR -- JR Richardson Engineering for the Masses

8 29

[kamailio-users] floating value support
by Chandrakant Solanki 09 Aug '10

09 Aug '10

Hi Is kamailio support floating point operation like.. num1 = 1 num2 = 3 num3 = num1 / num2 i. e. 0.33 = 1 / 3 Is it possible...?? If yes, How ?? Any Idea?? -- Regards, Chandrakant Solanki

2 1

sip trace not logging the first invite
by alex pappas 09 Aug '10

09 Aug '10

Dear friends, I'm using the sip_trace module in order to log into a mysql DB all the SIP messages that are passing from my kamailio. I have the setflag(4) on the top of the route[0] and I have all the sip messages logged in the mysql Db. The problem is that I don't see the first INVITE of the call. Scenario: gateway1 --------------> kamailio ----------------> gateway2 The INVITE from gateway1 to kamailio is not logged. The trace is starting from the first 100 trying message. Is anyone aware on where the problem is ? P.S. By using the sip_trace() method I get the first INVITE but not the rest of the trace in the way that setflag(4) is logging. Thank you in advance Alex

2 1

Problem making Kamailio 3.0
by Uriel Rozenbaum 09 Aug '10

09 Aug '10

Hi guys, At the risk of showing unmatched stupidity I'm asking these few questions. I've downloaded the tarball sources for Kam3.0.2, uncompressed them and run make on a virtual machine that used to have Kam1.5.3. I edited the CFG file to make it work with the new version but still I cannot make it start. I get the following module errors: Aug 3 17:52:49 sbcdesa kamailio: ERROR: <core> [sr_module.c:390]: ERROR: load_module: could not open module </usr/local/lib/kamailio/modules/db_mysql.so>: /usr/local/lib/kamailio/modules/db_mysql.so: undefined symbol: debug Aug 3 17:52:49 sbcdesa kamailio: : <core> [cfg.y:3330]: parse error in config file /usr/local/etc/kamailio/kamailio.cfg, line 40, column 12-24: failed to load module Aug 3 17:52:49 sbcdesa kamailio: ERROR: <core> [sr_module.c:390]: ERROR: load_module: could not open module </usr/local/lib/kamailio/modules/carrierroute.so>: /usr/local/lib/kamailio/modules/carrierroute.so: undefined symbol: debug Aug 3 17:52:49 sbcdesa kamailio: : <core> [cfg.y:3330]: parse error in config file /usr/local/etc/kamailio/kamailio.cfg, line 67, column 12-28: failed to load module In my cfg file I've set mpath="/usr/local/lib/kamailio/modules_k/:/usr/local/lib/kamailio/modules/" as stated on the documentation and the contents of thos folders are: [root@sbcdesa kamailio-3.0.2]# ls /usr/local/lib/kamailio/modules/ acc.so carrierroute.so db_text.so exec.so mi_fifo.so pdt.so rr.so speeddial.so uac_redirect.so alias_db.so cfg_db.so dialog.so group.so mi_rpc.so permissions.so rtimer.so sqlops.so uac.so auth_db.so cfg_rpc.so dispatcher.so htable.so msilo.so pike.so sanity.so sst.so uri_db.so auth_diameter.so cfgutils.so diversion.so imc.so nathelper.so pv.so siptrace.so statistics.so userblacklist.so auth.so ctl.so domainpolicy.so maxfwd.so nat_traversal.so qos.so siputils.so textops.so usrloc.so avpops.so db_flatstore.so domain.so mediaproxy.so path.so ratelimit.so sl.so tm.so xlog.so benchmark.so db_mysql.so enum.so mi_datagram.so pdb.so registrar.so sms.so topoh.so [root@sbcdesa kamailio-3.0.2]# ls /usr/local/lib/kamailio/modules_k/ acc.so call_control.so domainpolicy.so imc.so nathelper.so pua_mi.so rtimer.so sqlops.so uac.so alias_db.so cfgutils.so domain.so kex.so nat_traversal.so pv.so siptrace.so sst.so uri_db.so auth_db.so db_text.so drouting.so maxfwd.so path.so qos.so siputils.so statistics.so userblacklist.so auth_diameter.so dialog.so exec.so mi_datagram.so pdt.so ratelimit.so sl.so textops.so usrloc.so auth.so dispatcher.so group.so mi_fifo.so permissions.so registrar.so sms.so tmx.so xlog.so benchmark.so diversion.so htable.so msilo.so pike.so rr.so speeddial.so uac_redirect.so Is there anything I'm missing? Should I delete everything and start over? I reviewed the makefile to be sure I was not excluding modules, maybe they are excluded somewhere else. Thanks in advance, Uriel

2 1

Help needed for OpenSer with Radius
by Pratik Shrestha 06 Aug '10

06 Aug '10

Dear All, I am very new to OpenSer. I want to use latest version of OpenSer with Radius. I need the documentation/tutorial on how to do this. Googling, Ionly found for the old version. Please help me. Regards, Pratik

3 8

Kamailio doesn't start
by Ernest Mavrel 06 Aug '10

06 Aug '10

Hi I have problems with starting of kamailio. When is rule in table dialplan, kamailio doesn't start. Dialplan table: id dpid pr match_op match_exp match_len subst_exp repl_exp attrs 1 1 0 1 ^0[1-9] 0 ^(0)([1-9])(.+) 386\2 Cut_0_Add_386 Log: 0(11570) DEBUG: dialplan [dp_db.c:200]: init 0(11570) DEBUG: <core> [db_res.c:118]: allocate 48 bytes for result set at 0x95ff60 0(11570) DEBUG: db_mysql [km_res.c:68]: 8 columns returned from the query 0(11570) DEBUG: <core> [db_res.c:155]: allocate 64 bytes for result names at 0x960028 0(11570) DEBUG: <core> [db_res.c:165]: allocate 32 bytes for result types at 0x960118 0(11570) DEBUG: db_mysql [km_res.c:85]: allocate 16 bytes for RES_NAMES[0] at 0x95fe18 0(11570) DEBUG: db_mysql [km_res.c:92]: RES_NAMES(0x95fe18)[0]=[dpid] 0(11570) DEBUG: db_mysql [km_res.c:100]: use DB1_INT result type 0(11570) DEBUG: db_mysql [km_res.c:85]: allocate 16 bytes for RES_NAMES[1] at 0x960310 0(11570) DEBUG: db_mysql [km_res.c:92]: RES_NAMES(0x960310)[1]=[pr] 0(11570) DEBUG: db_mysql [km_res.c:100]: use DB1_INT result type 0(11570) DEBUG: db_mysql [km_res.c:85]: allocate 16 bytes for RES_NAMES[2] at 0x960350 0(11570) DEBUG: db_mysql [km_res.c:92]: RES_NAMES(0x960350)[2]=[match_op] 0(11570) DEBUG: db_mysql [km_res.c:100]: use DB1_INT result type 0(11570) DEBUG: db_mysql [km_res.c:85]: allocate 16 bytes for RES_NAMES[3] at 0x960330 0(11570) DEBUG: db_mysql [km_res.c:92]: RES_NAMES(0x960330)[3]=[match_exp] 0(11570) DEBUG: db_mysql [km_res.c:136]: use DB1_STRING result type 0(11570) DEBUG: db_mysql [km_res.c:85]: allocate 16 bytes for RES_NAMES[4] at 0x9602f0 0(11570) DEBUG: db_mysql [km_res.c:92]: RES_NAMES(0x9602f0)[4]=[match_len] 0(11570) DEBUG: db_mysql [km_res.c:100]: use DB1_INT result type 0(11570) DEBUG: db_mysql [km_res.c:85]: allocate 16 bytes for RES_NAMES[5] at 0x9602d0 0(11570) DEBUG: db_mysql [km_res.c:92]: RES_NAMES(0x9602d0)[5]=[subst_exp] 0(11570) DEBUG: db_mysql [km_res.c:136]: use DB1_STRING result type 0(11570) DEBUG: db_mysql [km_res.c:85]: allocate 16 bytes for RES_NAMES[6] at 0x9602b0 0(11570) DEBUG: db_mysql [km_res.c:92]: RES_NAMES(0x9602b0)[6]=[repl_exp] 0(11570) DEBUG: db_mysql [km_res.c:136]: use DB1_STRING result type 0(11570) DEBUG: db_mysql [km_res.c:85]: allocate 16 bytes for RES_NAMES[7] at 0x960290 0(11570) DEBUG: db_mysql [km_res.c:92]: RES_NAMES(0x960290)[7]=[attrs] 0(11570) DEBUG: db_mysql [km_res.c:136]: use DB1_STRING result type 0(11570) DEBUG: db_mysql [km_dbase.c:342]: converting row 0 of 1 count 1 0(11570) DEBUG: <core> [db_row.c:119]: allocate 256 bytes for row values at 0x960370 0(11570) DEBUG: <core> [db_val.c:73]: converting INT [1] 0(11570) DEBUG: <core> [db_val.c:73]: converting INT [0] 0(11570) DEBUG: <core> [db_val.c:73]: converting INT [1] 0(11570) DEBUG: <core> [db_val.c:117]: converting STRING [^0[1-9]] 0(11570) DEBUG: <core> [db_val.c:73]: converting INT [0] 0(11570) DEBUG: <core> [db_val.c:117]: converting STRING [^(0)([1-9])(.+)] 0(11570) DEBUG: <core> [db_val.c:117]: converting STRING [386\2] 0(11570) DEBUG: <core> [db_val.c:117]: converting STRING [Cut_0_Add_386] 0(11570) DEBUG: dialplan [dp_db.c:374]: build_rule Any help? BR Ernest

3 20

Re: [SR-Users] Problem with t_relay() and VPN tunnel
by Alex Balashov 06 Aug '10

06 Aug '10

On 08/05/2010 07:58 PM, Carlos Ruiz Diaz wrote: > 2) I am sorry, I think I did not understand the question. Did you mean > if the messag exists when leaving tun0 in *B* going to tun0 in *A*? My concern is that the packet is going out on eth0 despite being intended to go out of tun0. Try to do a packet capture on eth0 and look for packets addressed to 10.8.0.0/24, which of course will not reach their destination--but that's not the point. Also, do you have the 'mhomed' option set to 1 in your Kamailio config? http://www.kamailio.org/dokuwiki/doku.php/core-cookbook:3.0.x#mhomed It is a requirement in this case. > > /tcpdump udp /shows packets coming from *B* when perl is running, but no > packets are received using t_relay() and kamailio That is because the source socket on the Perl script side is probably interface-agnostic and just uses the IP routing table plainly. -- Alex Balashov - Principal Evariste Systems LLC 1170 Peachtree Street 12th Floor, Suite 1200 Atlanta, GA 30309 Tel: +1-678-954-0670 Fax: +1-404-961-1892 Web: http://www.evaristesys.com/

2 2

Recommendation
by Carsten Bock 05 Aug '10

05 Aug '10

Hi everybody, a former colleague and friend of mine is searching for a new job. He is currently working as NOC-Support-Engeneer and has good knowledge of the SIP-protocol and about running/supporting Kamailio (and supporting systems, e.g. databases). He would prefer to work in northern Germany; but that is not a must but more like a "nice-to-have". You can find his profile on Xing: https://www.xing.com/profile/Marcel_Weinberg3 I can provide further information/contact information if someone is interested. Kind regards, Carsten

1 0

help with configure kamailio authenticate with freeradius server.
by thanh.truong＠htklabs.com 05 Aug '10

05 Aug '10

Hi all I try to configure kamailio to register sip client with freeradius via kamailio. My configure as: ###################kamailio.cfg############# #!KAMAILIO # # $Id$ # # Kamailio (OpenSER) SIP Server v3.0 - basic configuration script # - web: http://www.kamailio.org # - git: http://sip-router.org # # Direct your questions about this file to: <users(a)lists.kamailio.org> # # Refer to the Core CookBook at http://www.kamailio.org/dokuwiki/doku.php # for an explanation of possible statements, functions and parameters. # # Several features can be enabled using '#!define WITH_FEATURE' directives: # # *** To run in debug mode: #!define WITH_DEBUG # # *** To enable mysql: #!define WITH_MYSQL # # *** To enable authentication execute: # - enable mysql #!define WITH_AUTH # - add users using 'kamctl' # # *** To enable persistent user location execute: # - enable mysql # - define WITH_USRLOCDB # # *** To enable presence server execute: # - enable mysql # - define WITH_PRESENCE # # *** To enable nat traversal execute: # - define WITH_NAT # - install RTPProxy: http://www.rtpproxy.org # - start RTPProxy: # rtpproxy -l _your_public_ip_ -s udp:localhost:7722 # # *** To enable PSTN gateway routing execute: # - define WITH_PSTN # - set the value of pstn.gw_ip # - check route[PSTN] for regexp routing condition # # *** To enhance accounting execute: # - enable mysql # - define WITH_ACCDB # - add following columns to database #!ifdef ACCDB_COMMENT ALTER TABLE acc ADD COLUMN src_user VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE acc ADD COLUMN src_domain VARCHAR(128) NOT NULL DEFAULT ''; ALTER TABLE acc ADD COLUMN dst_ouser VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE acc ADD COLUMN dst_user VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE acc ADD COLUMN dst_domain VARCHAR(128) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN src_user VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN src_domain VARCHAR(128) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN dst_ouser VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN dst_user VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN dst_domain VARCHAR(128) NOT NULL DEFAULT ''; #!endif ####### Global Parameters ######### #!ifdef WITH_DEBUG debug=4 log_stderror=no #!else debug=2 log_stderror=no #!endif memdbg=5 memlog=5 log_facility=LOG_LOCAL0 fork=yes children=4 /* uncomment the next line to disable TCP (default on) */ #disable_tcp=yes /* uncomment the next line to disable the auto discovery of local aliases based on revers DNS on IPs (default on) */ #auto_aliases=no port=5060 /* uncomment and configure the following line if you want Kamailio to bind on a specific interface/port/proto (default bind on all available) */ #listen=udp:10.0.0.10:5060 ####### Custom Parameters ######### # These parameters can be modified runtime via RPC interface # - see the documentation of 'cfg_rpc' module. # # Format: group.id = value 'desc' description # Access: $sel(cfg_get.group.id) or @cfg_get.group.id # #!ifdef WITH_PSTN # PSTN GW Routing # # - pstn.gw_ip: valid IP or hostname as string value, example: # pstn.gw_ip = "10.0.0.101" desc "My PSTN GW Address" # # - by default is empty to avoid misrouting pstn.gw_ip = "" desc "PSTN GW Address" #!endif ####### Modules Section ######## #set module path mpath="/usr/local/lib/kamailio/modules_k/:/usr/local/lib/kamailio/modules/" /* uncomment next line for MySQL DB support */ #!ifdef WITH_MYSQL loadmodule "db_mysql.so" #!endif loadmodule "mi_fifo.so" loadmodule "kex.so" loadmodule "tm.so" loadmodule "tmx.so" loadmodule "sl.so" loadmodule "rr.so" loadmodule "pv.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "uri_db.so" loadmodule "siputils.so" loadmodule "xlog.so" loadmodule "sanity.so" loadmodule "ctl.so" loadmodule "mi_rpc.so" loadmodule "acc.so" #!ifdef WITH_AUTH loadmodule "auth.so" loadmodule "auth_radius.so" #!endif /* uncomment next line for aliases support NOTE: a DB (like db_mysql) module must be also loaded */ #loadmodule "alias_db.so" /* uncomment next line for multi-domain support NOTE: a DB (like db_mysql) module must be also loaded NOTE: be sure and enable multi-domain support in all used modules (see "multi-module params" section ) */ #loadmodule "domain.so" #!ifdef WITH_PRESENCE loadmodule "presence.so" loadmodule "presence_xml.so" #!endif #!ifdef WITH_NAT loadmodule "nathelper.so" #!endif # ----------------- setting module-specific parameters --------------- # ----- mi_fifo params ----- modparam("mi_fifo", "fifo_name", "/tmp/kamailio_fifo") # ----- rr params ----- # add value to ;lr param to cope with most of the UAs modparam("rr", "enable_full_lr", 1) # do not append from tag to the RR (no need for this script) modparam("rr", "append_fromtag", 0) # ----- rr params ----- modparam("registrar", "method_filtering", 1) /* uncomment the next line to disable parallel forking via location */ # modparam("registrar", "append_branches", 0) /* uncomment the next line not to allow more than 10 contacts per AOR */ #modparam("registrar", "max_contacts", 10) # ----- uri_db params ----- /* by default we disable the DB support in the module as we do not need it in this configuration */ modparam("uri_db", "use_uri_table", 0) modparam("uri_db", "db_url", "") # ----- acc params ----- /* what sepcial events should be accounted ? */ modparam("acc", "early_media", 1) modparam("acc", "report_ack", 1) modparam("acc", "report_cancels", 1) /* by default ww do not adjust the direct of the sequential requests. if you enable this parameter, be sure the enable "append_fromtag" in "rr" module */ modparam("acc", "detect_direction", 0) /* account triggers (flags) */ modparam("acc", "failed_transaction_flag", 3) modparam("acc", "log_flag", 1) modparam("acc", "log_missed_flag", 2) modparam("acc", "log_extra", "src_user=$fU;src_domain=$fd;dst_ouser=$tU;dst_user=$rU;dst_domain=$rd") /* enhanced DB accounting */ #!ifdef WITH_ACCDB modparam("acc", "db_flag", 1) modparam("acc", "db_missed_flag", 2) modparam("acc", "db_url", "mysql://openser:openserrw@localhost/openser") modparam("acc", "db_extra", "src_user=$fU;src_domain=$fd;dst_ouser=$tU;dst_user=$rU;dst_domain=$rd") #!endif # ----- usrloc params ----- /* enable DB persistency for location entries */ #!ifdef WITH_USRLOCDB modparam("usrloc", "db_mode", 2) modparam("usrloc", "db_url", "mysql://openser:openserrw@localhost/openser") #!endif # ----- auth_db params ----- /* enable the DB based authentication */ #!ifdef WITH_AUTH #modparam("auth_db", "calculate_ha1", yes) #modparam("auth_db", "password_column", "password") #modparam("auth_db", "db_url", # "mysql://openser:openserrw@localhost/kamailio") #modparam("auth_db", "load_credentials", "") modparam("auth_radius", "radius_config", "/usr/local/etc/radiusclient-ng/radiusclient.conf") modparam("auth_radius", "service_type", 15) modparam("auth_radius", "auth_extra", "Acct-Session-Id=$ci") modparam("auth_radius", "use_ruri_flag", 22) #!endif # ----- alias_db params ----- /* uncomment the following lines if you want to enable the DB based aliases */ #modparam("alias_db", "db_url", # "mysql://openser:openserrw@localhost/openser") # ----- domain params ----- /* uncomment the following lines to enable multi-domain detection support */ #modparam("domain", "db_url", # "mysql://openser:openserrw@localhost/openser") #modparam("domain", "db_mode", 1) # Use caching # ----- multi-module params ----- /* uncomment the following line if you want to enable multi-domain support in the modules (dafault off) */ #modparam("alias_db|auth_db|usrloc|uri_db", "use_domain", 1) # ----- presence params ----- /* enable presence server support */ #!ifdef WITH_PRESENCE modparam("presence|presence_xml", "db_url", "mysql://openser:openserrw@localhost/openser") modparam("presence_xml", "force_active", 1) modparam("presence", "server_address", "sip:10.0.0.10:5060") #!endif # ----- nathelper ----- #!ifdef WITH_NAT modparam("nathelper", "rtpproxy_sock", "udp:127.0.0.1:7722") modparam("nathelper", "natping_interval", 30) modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "sipping_bflag", 7) modparam("nathelper", "sipping_from", "sip:pinger@kamailio.org") modparam("registrar|nathelper", "received_avp", "$avp(i:80)") modparam("usrloc", "nat_bflag", 6) #!endif ####### Routing Logic ######## # main request routing logic route{ if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; } if(!sanity_check("1511", "7")) { xlog("Malformed SIP message from $si:$sp\n"); exit; } # NAT detection route(NAT); if (has_totag()) { # sequential request withing a dialog should # take the path determined by record-routing if (loose_route()) { if (is_method("BYE")) { setflag(1); # do accounting ... setflag(3); # ... even if the transaction fails } route(RELAY); } else { if (is_method("SUBSCRIBE") && uri == myself) { # in-dialog subscribe requests route(PRESENCE); exit; } if ( is_method("ACK") ) { if ( t_check_trans() ) { # non loose-route, but stateful ACK; must be an ACK after a 487 or e.g. 404 from upstream server t_relay(); exit; } else { # ACK without matching transaction ... ignore and discard.\n"); exit; } } sl_send_reply("404","Not here"); } exit; } #initial requests # CANCEL processing if (is_method("CANCEL")) { if (t_check_trans()) t_relay(); exit; } t_check_trans(); # authentication route(AUTH); # record routing for dialog forming requests (in case they are routed) # - remove preloaded route headers remove_hf("Route"); if (is_method("INVITE|SUBSCRIBE")) record_route(); # account only INVITEs if (is_method("INVITE")) { setflag(1); # do accounting } if (!uri==myself) /* replace with following line if multi-domain support is used */ ##if (!is_uri_host_local()) { append_hf("P-hint: outbound\r\n"); route(RELAY); } # requests for my domain if( is_method("PUBLISH|SUBSCRIBE")) route(PRESENCE); if (is_method("REGISTER")) { if(isflagset(5)) { setbflag("6"); # uncomment next line to do SIP NAT pinging ## setbflag("7"); } if (!save("location")) sl_reply_error(); exit; } if ($rU==$null) { # request with no Username in RURI sl_send_reply("484","Address Incomplete"); exit; } route(PSTN); # apply DB based aliases (uncomment to enable) ##alias_db_lookup("dbaliases"); if (!lookup("location")) { switch ($rc) { case -1: case -3: t_newtran(); t_reply("404", "Not Found"); exit; case -2: sl_send_reply("405", "Method Not Allowed"); exit; } } # when routing via usrloc, log the missed calls also setflag(2); route(RELAY); } route[RELAY] { #!ifdef WITH_NAT if (check_route_param("nat=yes")) { setbflag("6"); } if (isflagset(5) || isbflagset("6")) { route(RTPPROXY); } #!endif /* example how to enable some additional event routes */ if (is_method("INVITE")) { #t_on_branch("BRANCH_ONE"); t_on_reply("REPLY_ONE"); t_on_reply("REPLY_ONE"); t_on_failure("FAIL_ONE"); } if (!t_relay()) { sl_reply_error(); } exit; } # Presence server route route[PRESENCE] { #!ifdef WITH_PRESENCE if (!t_newtran()) { sl_reply_error(); exit; }; if(is_method("PUBLISH")) { handle_publish(); t_release(); } else if( is_method("SUBSCRIBE")) { handle_subscribe(); t_release(); } exit; #!endif # if presence enabled, this part will not be executed if (is_method("PUBLISH") || $rU==$null) { sl_send_reply("404", "Not here"); exit; } return; # Authentication route route[AUTH] { #!ifdef WITH_AUTH if (is_method("REGISTER")) { # authenticate the REGISTER requests (uncomment to enable auth) if (!radius_www_authorize("192.168.1.70")) { www_challenge("192.168.1.70", "0"); exit; } if ($au!=$tU) { sl_send_reply("403","Forbidden auth ID"); exit; } } else { # authenticate if from local subscriber (uncomment to enable auth) if (from_uri==myself) { if (!radius_proxy_authorize("192.168.1.70")) { proxy_challenge("192.168.1.70", "0"); exit; } if (is_method("PUBLISH")) { if ($au!=$tU) { sl_send_reply("403","Forbidden auth ID"); exit; } } else { if ($au!=$fU) { sl_send_reply("403","Forbidden auth ID"); exit; } } consume_credentials(); # caller authenticated } } #!endif return; } # Caller NAT detection route route[NAT]{ #!ifdef WITH_NAT force_rport(); if (nat_uac_test("19")) { if (method=="REGISTER") { fix_nated_register(); } else { fix_nated_contact(); } setflag(5); } #!endif return; } # RTPProxy control route[RTPPROXY] { #!ifdef WITH_NAT if (is_method("BYE")) { unforce_rtp_proxy(); } else if (is_method("INVITE")){ force_rtp_proxy(); } if (!has_totag()) add_rr_param(";nat=yes"); #!endif return; } # PSTN GW routing route[PSTN] { #!ifdef WITH_PSTN # check if PSTN GW IP is defined if (strempty($sel(cfg_get.pstn.gw_ip))) { xlog("SCRIPT: PSTN rotuing enabled but pstn.gw_ip not defined\n"); return; } # route to PSTN dialed numbers starting with '+' or '00' # (international format) # - update the condition to match your dialing rules for PSTN routing if(!($rU=~"^(\+|00)[1-9][0-9]{3,20}$")) return; # only local users allowed to call if(from_uri!=myself) { sl_send_reply("403", "Not Allowed"); exit; } $ru = "sip:" + $rU + "@" + $sel(cfg_get.pstn.gw_ip); route(RELAY); exit; #!endif return; } # Sample branch router branch_route[BRANCH_ONE] { xdbg("new branch at $ru\n"); } # Sample onreply route onreply_route[REPLY_ONE] { xdbg("incoming reply\n"); #!ifdef WITH_NAT if ((isflagset(5) || isbflagset("6")) && status=~"(183)|(2[0-9][0-9])") { force_rtp_proxy(); } if (isbflagset("6")) { fix_nated_contact(); } #!endif } # Sample failure route failure_route[FAIL_ONE] { #!ifdef WITH_NAT if (is_method("INVITE") && (isbflagset("6") || isflagset(5))) { unforce_rtp_proxy(); } #!endif if (t_is_canceled()) { exit; } # uncomment the following lines if you want to block client # redirect based on 3xx replies. ##if (t_check_status("3[0-9][0-9]")) { ##t_reply("404","Not found"); ## exit; ##} # uncomment the following lines if you want to redirect the failed # calls to a different new destination ##if (t_check_status("486|408")) { ## sethostport("192.168.2.100:5060"); ## append_branch(); ## # do not set the missed call flag again ## t_relay(); ##} } ############################################## I run command : kamctl start But : ERROR: PID file /var/run/kamailio.pid does not exist -- Kamailio start failed And I run : tail -f /var/log/message to show log: The log is: Aug 4 15:05:07 appliance kamailio: ERROR: <core> [sr_module.c:390]: ERROR: load_module: could not open module </usr/local/lib/kamailio/modules/auth_radius.so>: libradiusclient-ng.so.2: cannot open shared object file: No such file or directory Aug 4 15:05:07 appliance kamailio: : <core> [cfg.y:3330]: parse error in config file /usr/local/etc/kamailio/kamailio.cfg, line 145, column 12-27: failed to load module Aug 4 15:05:07 appliance kamailio: ERROR: <core> [modparam.c:154]: set_mod_param_regex: No module matching <auth_radius> found Aug 4 15:05:07 appliance kamailio: : <core> [cfg.y:3333]: parse error in config file /usr/local/etc/kamailio/kamailio.cfg, line 234, column 92: Can't set module parameter Aug 4 15:05:07 appliance kamailio: ERROR: <core> [modparam.c:154]: set_mod_param_regex: No module matching <auth_radius> found Aug 4 15:05:07 appliance kamailio: : <core> [cfg.y:3333]: parse error in config file /usr/local/etc/kamailio/kamailio.cfg, line 235, column 43: Can't set module parameter Aug 4 15:05:07 appliance kamailio: ERROR: <core> [modparam.c:154]: set_mod_param_regex: No module matching <auth_radius> found Aug 4 15:05:07 appliance kamailio: : <core> [cfg.y:3333]: parse error in config file /usr/local/etc/kamailio/kamailio.cfg, line 236, column 60: Can't set module parameter Aug 4 15:05:07 appliance kamailio: ERROR: <core> [modparam.c:154]: set_mod_param_regex: No module matching <auth_radius> found Aug 4 15:05:07 appliance kamailio: : <core> [cfg.y:3333]: parse error in config file /usr/local/etc/kamailio/kamailio.cfg, line 237, column 44: Can't set module parameter Aug 4 15:05:07 appliance kamailio: : <core> [cfg.y:3333]: parse error in config file /usr/local/etc/kamailio/kamailio.cfg, line 479, column 50: unknown command, missing loadmodule? Aug 4 15:05:07 appliance kamailio: : <core> [cfg.y:3333]: parse error in config file /usr/local/etc/kamailio/kamailio.cfg, line 494, column 53: unknown command, missing loadmodule? ############### I try to add : /usr/local/lib/* to /etc/ld.so.conf And run : ldconfig -v But the result is the same error . Please help me if someone know what is wrong. Any suggest is welcome. Thanks and Regards Thanh.Truong

2 1

help with sip client register with freeradius via kamailio.
by thanh.truong＠htklabs.com 05 Aug '10

05 Aug '10

Hi all. Please help me with my problem. I trying to set up kamailio and freeradius. I want sip client authenticate with freeradius server, but for a long time I can make it work. I have referenced many reference document but it cannot work. My configure file as my attachment . Please suggest if you have ideal. Kamailio -3.0.1 freeradius-1.1.3-1.5.el5_4.src.rpm radiusclient-ng-0.5.6 please help me as soon as possible. Thanks and regards.

2 1

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users August 2010