sr-users August 2010

sr-users@lists.kamailio.org

47 participants
71 discussions

opensips long shutdown time
by Dave Singer 22 Aug '10

22 Aug '10

sometimes when I'm do a restart on opensips (using init.d script, with some customization to handle this problem) opensips takes quite a bit of time, like 30 - 50 seconds to stop. Other times it is very quick. I'm using 1.6.2 and 1.6.3. The servers are fairly busy, less then 200 calls per sec, with around 1000 sustained open calls. I am using dialog module and db mode is 3 (on shutdown) with postgresql 8.4. However since sometimes it is very quick with the same call volume it doesn't "feel" like this is the problem. Further I have had it be slow to stop when testing a config that is not using dialog at all and there are no active calls or any sip activity when I try to stop it. My hunch is slightly toward it is waiting on a transaction but not so sure. The pertinent part of my init.d script customizations are for after sending opensips the kill <pid> signal to every 0.1 seconds check if it has stopped yet then start it back up. Needless to say, having it take 50 seconds to restart, and not responding to sip traffic does not make customers happy when your dealing with thousands of call. :( Any thoughts or things to try would be appreciated. Thanks cando

2 1

help to error when configure carrierroute in kamailio 3.0.1
by truong ngoc THANH 20 Aug '10

20 Aug '10

hi all, i have configure carrierroute in kamailio as bellow. ========= kamailio.cfg === route[1] { # route calls based on hash over callid # choose route domain 0 of the default carrier if(!cr_route("default", "default", "$rU", "$rU", "call_id")){ sl_send_reply("403", "Not allowed"); } else { # In case of failure, re-route the request t_on_failure("1"); # Relay the request to the gateway t_relay(); } } failure_route[1] { # In case of failure, send it to an alternative route: if (t_check_status("408|5[0-9][0-9]")) { #choose route domain 1 of the default carrier if(!cr_route("default", "default", "$rU", "$rU", "call_id")){ } else { xlog("failure 2"); t_on_failure("2"); t_relay(); } } } =========\ in database: mysql> select * from carrierroute; +----+---------+--------+-------------+-------+------+------+-------+--------------+----------------+----------------+-------------+ | id | carrier | domain | scan_prefix | flags | mask | prob | strip | rewrite_host | rewrite_prefix | rewrite_suffix | description | +----+---------+--------+-------------+-------+------+------+-------+--------------+----------------+----------------+-------------+ | 1 | 1 | 1 | 1000 | 0 | 0 | 1 | 0 | 192.168.1.42 | | | FRANCE | +----+---------+--------+-------------+-------+------+------+-------+--------------+----------------+----------------+-------------+ 1 row in set (0.00 sec) mysql> select * from carrier_name; +----+---------+ | id | carrier | +----+---------+ | 1 | default | +----+---------+ mysql> select * from domain_name; +----+---------+ | id | domain | +----+---------+ | 1 | default | +----+---------+ ================ in server 192.168.1.40 : subscriber table: mysql> select * from subscriber; +----+----------+--------------+----------+---------------+----------------------------------+----------------------------------+------+ | id | username | domain | password | email_address | ha1 | ha1b | rpid | +----+----------+--------------+----------+---------------+----------------------------------+----------------------------------+------+ | 1 | 1 | 192.168.1.40 | 1 | | b8ee4a7080092d7fd27357de1799b111 | d1343e4f0259199ed6b06d6338d39903 | NULL | | 2 | 2 | 192.168.1.40 | 2 | | 25f61f90a19afe508629127838c11509 | 7f4ec87f39f48d0d8f8a537cfc34c5c9 | NULL | | 3 | 3 | kamailio.com | 3 | | 63a131bf02b4123073970731a4525470 | 64e49a4f89317c5ee757ba0366ec9307 | NULL | | 4 | 1000 | 192.168.1.40 | 1000 | | 8e9f00da8e49cc8b844b6cee1752b949 | 2bff4783b0ce3412bf33e7400fbbedce | NULL | | 5 | 4 | 192.168.1.40 | 4 | | 037cf4277ce31c104e4b1bc7bbcf8ad4 | cb2321d9ac8bfe749cedc1d66cad5d73 | NULL | | 6 | 1 | kamailio.com | 1 | | 31fb6891a2fcb9b13a952ce3f12359c9 | 84add6cffd100f8ca3c8660c3c9617b5 | NULL | | 7 | 1 | 192.168.1.42 | 1 | | ad57b2abdf288984bc4a897a9e7f2ba9 | 60b9ab690724e5a535df794131e2345f | NULL | | 8 | 1000 | 192.168.1.42 | 1000 | | 0a9fb3a1de135a32b9090798a0dcb240 | bf5a95934a59b480dbf85abe386144b6 | NULL | +----+----------+--------------+----------+---------------+----------------------------------+----------------------------------+------+ I try to make call from 1(a)192.168.1.40 to 1000(a)192.168.1.42 but the call failed. sip client 1(a)192.168.1.40 show that : server failure and sip client 1000(a)192.168.1.42 ringing. ============ sip trace for 192.168.1.40: U 192.168.1.40:5060 -> 192.168.1.42:5060 INVITE sip:1000@192.168.1.42 SIP/2.0. Record-Route: <sip:192.168.1.40;lr=on>. Via: SIP/2.0/UDP 192.168.1.40;branch=z9hG4bKf92a.649f39e3.0. Via: SIP/2.0/UDP 192.168.1.10:50495;branch=z9hG4bK-d8754z-ec188605061deb73-1---d8754z-;rport=50495. Max-Forwards: 69. Contact: <sip:1@192.168.1.10:50495;rinstance=9a88ebaf62e2a935>. To: <sip:1000@192.168.1.40:5060>. From: <sip:1@192.168.1.40:5060>;tag=fd3fe92e. Call-ID: MmNjYTZjMjNmOWZkN2RkZWE3NWUxOWZlNWUyOTY3ZmM.. CSeq: 2 INVITE. Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REGISTER, SUBSCRIBE, NOTIFY, REFER, INFO. Content-Type: application/sdp. Supported: replaces. User-Agent: 3CXPhone 4.0.10858.0. Content-Length: 279. . v=0. o=3cxVCE 96031755 384028260 IN IP4 192.168.1.10. s=3cxVCE Audio Call. c=IN IP4 192.168.1.10. t=0 0. m=audio 40002 RTP/AVP 0 8 3 101. a=rtpmap:0 PCMU/8000. a=rtpmap:8 PCMA/8000. a=rtpmap:3 GSM/8000. a=rtpmap:101 telephone-event/8000. a=fmtp:101 0-15. a=ptime:20. a=sendrecv. U 192.168.1.40:5060 -> 192.168.1.10:50495 SIP/2.0 500 I'm terribly sorry, server error occurred (6/SL). Via: SIP/2.0/UDP 192.168.1.10:50495;branch=z9hG4bK-d8754z-ec188605061deb73-1---d8754z-;rport=50495. To: <sip:1000@192.168.1.40:5060>;tag=ae07808f44ebda0182a54cf170e36dbe.ba60. From: <sip:1@192.168.1.40:5060>;tag=fd3fe92e. Call-ID: MmNjYTZjMjNmOWZkN2RkZWE3NWUxOWZlNWUyOTY3ZmM.. CSeq: 2 INVITE. Server: kamailio (3.0.1 (i386/linux)). Content-Length: 0. . U 192.168.1.10:50495 -> 192.168.1.40:5060 ACK sip:1000@192.168.1.40:5060 SIP/2.0. Via: SIP/2.0/UDP 192.168.1.10:50495;branch=z9hG4bK-d8754z-ec188605061deb73-1---d8754z-;rport. Max-Forwards: 70. To: <sip:1000@192.168.1.40:5060>;tag=ae07808f44ebda0182a54cf170e36dbe.ba60. From: <sip:1@192.168.1.40:5060>;tag=fd3fe92e. Call-ID: MmNjYTZjMjNmOWZkN2RkZWE3NWUxOWZlNWUyOTY3ZmM.. CSeq: 2 ACK. Content-Length: 0. and sip trace in 192.168.1.42: ==== U 192.168.1.40:5060 -> 192.168.1.42:5060 INVITE sip:1000@192.168.1.42 SIP/2.0. Record-Route: <sip:192.168.1.40;lr=on>. Via: SIP/2.0/UDP 192.168.1.40;branch=z9hG4bKc4e.5ee44227.0. Via: SIP/2.0/UDP 192.168.1.10:50495;branch=z9hG4bK-d8754z-7e347d55637cf134-1---d8754z-;rport=50495. Max-Forwards: 69. Contact: <sip:1@192.168.1.10:50495;rinstance=9a88ebaf62e2a935>. To: <sip:1000@192.168.1.40:5060>. From: <sip:1@192.168.1.40:5060>;tag=722dc40c. Call-ID: ZGY0YTY5YmYzM2E2MzEzNDgzODhkMTllN2RiY2ExOGM.. CSeq: 2 INVITE. Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REGISTER, SUBSCRIBE, NOTIFY, REFER, INFO. Content-Type: application/sdp. Supported: replaces. User-Agent: 3CXPhone 4.0.10858.0. Content-Length: 280. . v=0. o=3cxVCE 227296140 367695825 IN IP4 192.168.1.10. s=3cxVCE Audio Call. c=IN IP4 192.168.1.10. t=0 0. m=audio 40000 RTP/AVP 0 8 3 101. a=rtpmap:0 PCMU/8000. a=rtpmap:8 PCMA/8000. a=rtpmap:3 GSM/8000. a=rtpmap:101 telephone-event/8000. a=fmtp:101 0-15. a=ptime:20. a=sendrecv. U 192.168.1.42:5060 -> 192.168.1.40:5060 SIP/2.0 100 trying -- your call is important to us. Via: SIP/2.0/UDP 192.168.1.40;branch=z9hG4bKc4e.5ee44227.0. Via: SIP/2.0/UDP 192.168.1.10:50495;branch=z9hG4bK-d8754z-7e347d55637cf134-1---d8754z-;rport=50495. To: <sip:1000@192.168.1.40:5060>. From: <sip:1@192.168.1.40:5060>;tag=722dc40c. Call-ID: ZGY0YTY5YmYzM2E2MzEzNDgzODhkMTllN2RiY2ExOGM.. CSeq: 2 INVITE. Server: kamailio (3.0.1 (i386/linux)). Content-Length: 0. . U 192.168.1.42:5060 -> 192.168.1.10:6872 INVITE sip:1000@192.168.1.10:6872;rinstance=c308344d9524d1a4 SIP/2.0. Record-Route: <sip:192.168.1.42;lr=on>. Record-Route: <sip:192.168.1.40;lr=on>. Via: SIP/2.0/UDP 192.168.1.42;branch=z9hG4bKc4e.f9fad397.0. Via: SIP/2.0/UDP 192.168.1.40;branch=z9hG4bKc4e.5ee44227.0. Via: SIP/2.0/UDP 192.168.1.10:50495;branch=z9hG4bK-d8754z-7e347d55637cf134-1---d8754z-;rport=50495. Max-Forwards: 68. Contact: <sip:1@192.168.1.10:50495;rinstance=9a88ebaf62e2a935>. To: <sip:1000@192.168.1.40:5060>. From: <sip:1@192.168.1.40:5060>;tag=722dc40c. Call-ID: ZGY0YTY5YmYzM2E2MzEzNDgzODhkMTllN2RiY2ExOGM.. CSeq: 2 INVITE. Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REGISTER, SUBSCRIBE, NOTIFY, REFER, INFO. Content-Type: application/sdp. Supported: replaces. User-Agent: 3CXPhone 4.0.10858.0. Content-Length: 280. . v=0. o=3cxVCE 227296140 367695825 IN IP4 192.168.1.10. s=3cxVCE Audio Call. c=IN IP4 192.168.1.10. t=0 0. m=audio 40000 RTP/AVP 0 8 3 101. a=rtpmap:0 PCMU/8000. a=rtpmap:8 PCMA/8000. a=rtpmap:3 GSM/8000. a=rtpmap:101 telephone-event/8000. a=fmtp:101 0-15. a=ptime:20. a=sendrecv. U 192.168.1.10:6872 -> 192.168.1.42:5060 SIP/2.0 180 Ringing. Via: SIP/2.0/UDP 192.168.1.42;branch=z9hG4bKc4e.f9fad397.0. Via: SIP/2.0/UDP 192.168.1.40;branch=z9hG4bKc4e.5ee44227.0. Via: SIP/2.0/UDP 192.168.1.10:50495;branch=z9hG4bK-d8754z-7e347d55637cf134-1---d8754z-;rport=50495. Record-Route: <sip:192.168.1.42;lr>. Record-Route: <sip:192.168.1.40;lr=on>. Contact: <sip:1000@192.168.1.10:6872;rinstance=c308344d9524d1a4>. To: <sip:1000@192.168.1.40:5060>;tag=660be63a. From: <sip:1@192.168.1.40:5060>;tag=722dc40c. Call-ID: ZGY0YTY5YmYzM2E2MzEzNDgzODhkMTllN2RiY2ExOGM.. CSeq: 2 INVITE. User-Agent: PortGo v6.0, Build 07282010. Content-Length: 0. ======================== and in server 192.168.1.42:subscriber table: mysql> select * from subscriber; +----+----------+--------------+----------+---------------+----------------------------------+----------------------------------+------+ | id | username | domain | password | email_address | ha1 | ha1b | rpid | +----+----------+--------------+----------+---------------+----------------------------------+----------------------------------+------+ | 1 | 1000 | 192.168.1.42 | 1000 | | 0a9fb3a1de135a32b9090798a0dcb240 | bf5a95934a59b480dbf85abe386144b6 | NULL | | 2 | 1 | 192.168.1.42 | 1 | | ad57b2abdf288984bc4a897a9e7f2ba9 | 60b9ab690724e5a535df794131e2345f | NULL | | 3 | 1 | 192.168.1.40 | 1 | | b8ee4a7080092d7fd27357de1799b111 | d1343e4f0259199ed6b06d6338d39903 | NULL | please suggest to get correct configue. thanks for looking. TRUONG NGOC THANH Telecommunications Engineer Tel: 0984 480 646 Y!M: ngoc217thanh

1 0

Kamailio v3.0.3 Released
by Daniel-Constantin Mierla 19 Aug '10

19 Aug '10

Kamailio v3.0.3 is out – this is a minor release including fixes in code and documentation since v3.0.2 (configuration file and database compatibility is preserved). Kamailio (OpenSER) 3.0.3 is based on the latest version of GIT branch 3.0, therefore those running 3.0.0, 3.0.1 or 3.0.2 are advised to upgrade — there is no change required to be done to configuration file or database. Source tarballs are available at: http://www.kamailio.org/pub/kamailio/3.0.3/src/ Detailed changelog: http://www.kamailio.org/pub/kamailio/3.0.3/ChangeLog Download via GIT: # git clone –depth 1 git://git.sip-router.org/sip-router kamailio # cd kamailio # git checkout -b kamailio_3.0 origin/kamailio_3.0 Binaries and packages will be uploaded at: http://www.kamailio.org/pub/kamailio/3.0.3/ Modules’ documentation: http://www.kamailio.org/docs/modules/3.0.x/ What is new in 3.0.x release series is summarized in the announcement of v3.0.0: http://www.kamailio.org/w/kamailio-openser-v3.0.0-release-notes/ If you are eager to see what’s up to next major release (v3.1.0, scheduled for September 2010, now being the testing phase), visit: http://sip-router.org/wiki/features/new-in-devel Cheers, Daniel -- Daniel-Constantin Mierla http://www.asipto.com/

1 0

Re: [SR-Users] help to config cfg_db module in kamailio 3.0.1
by truong ngoc THANH 19 Aug '10

19 Aug '10

dear Daniel, when i add xlog("my var value is: $sel(cfg_get.my.route_addr)\n"); i see that kamailio load right value. my scenarios as: my kamailio server(192.168.1.40) and the $sel(cfg_get.my.route_addr) is 192.168.1.110 i register with 1(a)192.168.1.40 and 2(a)192.168.1.40 then i make call is ok so the route ip is ??? and why i can make call ? TRUONG NGOC THANH Telecommunications Engineer Tel: 0984 480 646 Y!M: ngoc217thanh ________________________________

2 2

preparing kamailio 3.0.3
by Daniel-Constantin Mierla 19 Aug '10

19 Aug '10

Hello, I am planning to release minor version 3.0.3 by beginning of next week. Please commit there what you think it needs to be fixed for this release. Thanks, Daniel -- Daniel-Constantin Mierla http://www.asipto.com/

2 4

Re: [SR-Users] help to config cfg_db module in kamailio 3.0.1
by Daniel-Constantin Mierla 18 Aug '10

18 Aug '10

Hello, first, keep the mailing list on cc, otherwise future emails will be ignored. Then, the -ddd and -E parameters are for kamailio, not kamctl. Just run: kamailio -ddd -E of course, if you have a custom path to your config, keep you -c /path/to/cfg parameter. Cheers, Daniel On 8/18/10 6:20 PM, truong ngoc THANH wrote: > thanks Daniel, > thanks for help, but i cannot start :kamctl -ddd -E > or kamctl -ddd > or kamctl -E. > and can you show me how it work, or how the result when i declare the > parameter, and how do I know the parameter is used for ? > so nice too get your help. > TRUONG NGOC THANH > Telecommunications Engineer > Tel: 0984 480 646 > Y!M: ngoc217thanh > > > ------------------------------------------------------------------------ > *From:* Daniel-Constantin Mierla <miconda(a)gmail.com> > *To:* truong ngoc THANH <ngoc217thanh(a)yahoo.com> > *Cc:* kamailio <sr-users(a)lists.sip-router.org> > *Sent:* Wed, August 18, 2010 10:47:58 PM > *Subject:* Re: [SR-Users] help to config cfg_db module in kamailio 3.0.1 > > Hello, > > not a user of this module, however, start kamailio with parameters > -ddd -E and paste the output here. > > Do you declare my.route_addr in config file as well? Might be that the > parameter is declared in cfg_custom table, the startup debug log > should give more hints. > > Thanks, > Daniel > > > On 8/18/10 7:13 AM, truong ngoc THANH wrote: >> >> Hi all , >> >> I try to configure with cfg_db, but after create and insert value >> into tables in mysql , I cannot start kamailio. >> >> I add My config in kamalio.cfg >> >> ============== >> >> Loadmodule “cfg_db.so <http://cfg_db.so>” >> >> modparam("cfg_db", "db_url", >> "mysql://openser:openserrw@localhost/kamailio") >> >> modparam("cfg_db", "transl_tbl", "cfg_transl") >> >> modparam("cfg_db", "custom_tbl", "cfg_custom") >> >> I add and insert in mysql as: >> >> =============== >> >> cfg_transl table: >> >> group_name|name|cfg_table|cfg_table_group_name_field|cfg_table_name_field|cfg_table_value_field >> >> core|use_dst_blacklist|cfg_dns||| >> >> core|dst_blacklist_mem|cfg_dns||| >> >> core|dst_blacklist_expire||| >> >> my|route_addr|cfg_my|my_group_name|my_name|my_value ; overrides >> <default> values >> >> my|use_rtp_proxy|cfg_my|my_group_name|my_name|my_value >> >> *|*|||| ; matches all param ids, points to tables defined in row >> <default> >> >> <default>||cfg_var|group_name|name|value ; default cfg_table* values >> >> cfg_custom table: >> >> group_name|name|value_type|min_value|max_value|description >> >> my|route_addr|S|||Routing address >> >> my|use_rtp_proxy|I|0|1|Use RTP proxy >> >> cfg_var table: >> >> group_name|my_name|value >> >> core|debug|4 >> >> cfg_my table: >> >> my_group_name|my_name|my_value >> >> my|route_addr|127.0.0.1 >> >> my|use_rtp_proxy|1 >> >> cfg_dns table: >> >> group_name|name|value >> >> dns|use_dst_blacklist|1 >> >> dns|dst_blacklist_mem|1024 >> >> dns|dst_blacklist_expire|60 >> >> when I start kamailio the log show : >> >> =============== >> >> Aug 18 12:04:56 appliance /usr/local/sbin/kamailio[2771]: INFO: >> usrloc [hslot.c:53]: locks array size 512 >> >> Aug 18 12:04:56 appliance /usr/local/sbin/kamailio[2771]: ERROR: >> <core> [cfg/cfg_script.c:80]: ERROR: new_cfg_script_var(): variable >> already exists: my.route_addr >> >> Aug 18 12:04:56 appliance /usr/local/sbin/kamailio[2771]: ERROR: >> cfg_db [cfg_db.c:335]: cfg_db: Error declaring cfg int 'my.route_addr' >> >> Aug 18 12:04:56 appliance /usr/local/sbin/kamailio[2771]: ERROR: >> <core> [sr_module.c:860]: init_mod(): Error while initializing module >> cfg_db >> >> Thanks for looking. >> >> TRUONG NGOC THANH >> Telecommunications Engineer >> Tel: 0984 480 646 >> Y!M: ngoc217thanh >> >> >> >> _______________________________________________ >> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list >> sr-users(a)lists.sip-router.org >> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > > -- > Daniel-Constantin Mierla > http://www.asipto.com/ > -- Daniel-Constantin Mierla http://www.asipto.com/

2 7

help to config cfg_db module in kamailio 3.0.1
by truong ngoc THANH 18 Aug '10

18 Aug '10

Hi all , I try to configure with cfg_db, but after create and insert value into tables in mysql , I cannot start kamailio. I add My config in kamalio.cfg ============== Loadmodule “cfg_db.so” modparam("cfg_db", "db_url", "mysql://openser:openserrw@localhost/kamailio") modparam("cfg_db", "transl_tbl", "cfg_transl") modparam("cfg_db", "custom_tbl", "cfg_custom") I add and insert in mysql as: =============== cfg_transl table: group_name|name|cfg_table|cfg_table_group_name_field|cfg_table_name_field|cfg_table_value_field core|use_dst_blacklist|cfg_dns||| core|dst_blacklist_mem|cfg_dns||| core|dst_blacklist_expire||| my|route_addr|cfg_my|my_group_name|my_name|my_value ; overrides <default> values my|use_rtp_proxy|cfg_my|my_group_name|my_name|my_value *|*||||; matches all param ids, points to tables defined in row <default> <default>||cfg_var|group_name|name|value ; default cfg_table* values cfg_custom table: group_name|name|value_type|min_value|max_value|description my|route_addr|S|||Routing address my|use_rtp_proxy|I|0|1|Use RTP proxy cfg_var table: group_name|my_name|value core|debug|4 cfg_my table: my_group_name|my_name|my_value my|route_addr|127.0.0.1 my|use_rtp_proxy|1 cfg_dns table: group_name|name|value dns|use_dst_blacklist|1 dns|dst_blacklist_mem|1024 dns|dst_blacklist_expire|60 when I start kamailio the log show : =============== Aug 18 12:04:56 appliance /usr/local/sbin/kamailio[2771]: INFO: usrloc [hslot.c:53]: locks array size 512 Aug 18 12:04:56 appliance /usr/local/sbin/kamailio[2771]: ERROR: <core> [cfg/cfg_script.c:80]: ERROR: new_cfg_script_var(): variable already exists: my.route_addr Aug 18 12:04:56 appliance /usr/local/sbin/kamailio[2771]: ERROR: cfg_db [cfg_db.c:335]: cfg_db: Error declaring cfg int 'my.route_addr' Aug 18 12:04:56 appliance /usr/local/sbin/kamailio[2771]: ERROR: <core> [sr_module.c:860]: init_mod(): Error while initializing module cfg_db Thanks for looking. TRUONG NGOC THANH Telecommunications Engineer Tel: 0984 480 646 Y!M: ngoc217thanh

2 1

Users are not registering on my Kamailio
by Toyima Dias 18 Aug '10

18 Aug '10

HEllo community, I'm having some problems with my kamailio configuration, following is the section of my authentication process on my /etc/kamailio/kamailio.cfg route [3] { if (is_method("REGISTER")) { if (!www_authorize("", "subscriber")) { www_challenge("", "0"); exit; } if ($au!=$tU) { sl_send_reply("403", "Forbidden auth ID"); exit; } } else { if (from_uri==myself) { if(!proxy_authorize("", "subscriber")) { proxy_challenge("", "0"); exit; } if (is_method("PUBLISH")) { if ($au!=$tU) { sl_send_reply("403", "Forbidden auth ID"); exit; } } else { if ($au!=$fU) { sl_send_reply("403", "Forbidden auth ID"); exit; } } consume_credentials(); } } return; } I added a user with the following command: # kamctl add 1102 123456 And then i checked on mysql, table subscriber: mysql> select * from subscriber; +----+----------+---------------+----------+---------------+----------------------------------+----------------------------------+------+ | id | username | domain | password | email_address | ha1 | ha1b | rpid | +----+----------+---------------+----------+---------------+----------------------------------+----------------------------------+------+ | 3 | 1102 | dannydias.com | | | fe7a80817383cfd90950dea03d37eccf | dbb9b6ef93d4f3417038a6bf5cd176db | NULL | +----+----------+---------------+----------+---------------+----------------------------------+----------------------------------+------+ 1 row in set (0.00 sec) By the way, the domain field does not exist (dannydias.com) i'm not sure how this could affect the authentication process, this migh be the problem? And finally, ngrep-sip to check what is going on: # U 2010/08/17 22:28:38.548357 80.26.81.96:26932 -> 212.230.19.191:5060 *REGISTER sip:212.230.19.191 SIP/2.0'* Via: SIP/2.0/UDP 80.26.81.96:26932;branch=z9hG4bK-d2ee4e38' From: "1102" <sip:1102@212.230.19.191 <sip%3A1102(a)212.230.19.191> >;tag=36dcc698cfc16210o1' To: "1102" <sip:1102@212.230.19.191 <sip%3A1102(a)212.230.19.191>>' Call-ID: 4aab2f50-775b4d34(a)80.26.81.96' CSeq: 10409 REGISTER' Max-Forwards: 70' Authorization: Digest username="1102",realm="212.230.19.191",nonce="4c6b0d34000000c9c4e2068de2d41bec38c6d23029696501",uri="sip:212.230.19.191",algorithm=MD5,response="a09ea335a01051d714d2cbfe95e17820"' Contact: "1102" <sip:1102@80.26.81.96:26932>;expires=180' User-Agent: Linksys/SPA942-5.1.15(a)' Content-Length: 0' Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER' Supported: replaces' ' # U 2010/08/17 22:28:38.548357 212.230.19.191:5060 -> 80.26.81.96:26932 *SIP/2.0 401 Unauthorized'* Via: SIP/2.0/UDP 80.26.81.96:26932;branch=z9hG4bK-d2ee4e38' From: "1102" <sip:1102@212.230.19.191 <sip%3A1102(a)212.230.19.191> >;tag=36dcc698cfc16210o1' To: "1102" <sip:1102@212.230.19.191 <sip%3A1102(a)212.230.19.191> >;tag=00f209f5fddbfe1aa952cd699e41d531.97e5' Call-ID: 4aab2f50-775b4d34(a)80.26.81.96' CSeq: 10409 REGISTER' WWW-Authenticate: Digest realm="212.230.19.191", nonce="4c6b0d34000000caa164dcad25dbc5b4c6baefcef6dc84ae"' Server: Kamailio (1.5.4-notls (x86_64/linux))' Content-Length: 0' ' Could somebody help me? i can't find the real problem Thanks in advance DD

2 1

module load path and -L
by Daniel-Constantin Mierla 18 Aug '10

18 Aug '10

Hello, the path to modules can be specified via command line option -L or cfg parameter loadpath (aliased as mpath for K backward compat). loadpath overwrites the value given by -L. The question is whether the value given via -L shouldn't be effective all the time (i.e., loadpath cfg parameter ignored when -L is given) since it is via command line parameter -- my expectation is command line options should have higher priority. Changing it now will break backward compatibility (if anyone used it like now) while in testing, but if all think is a bug, then can be fixed. Cheers, Daniel -- Daniel-Constantin Mierla http://www.asipto.com/

2 2

set From and To attributes in assignments
by Daniel-Constantin Mierla 17 Aug '10

17 Aug '10

Hello, I committed in master branch (to be 3.1.0) code that allows to set uri, username, domain and display name for To and From headers using assignments to their respective PVs in configuration file. For example: $fu = "sip:anonymous@invalid"; $fn = '"Jon Doe"'; $tU = "+123455678"; Assignment of each such attribute should be done only once, otherwise you get concatenated values since it uses the internal lump system. Therefore, doing an update is not visible immediately in config unless you do use msg_apply_changes(). Also, use it carefully, in case you have sipv1 devices in your network then it can break dialog matching. Anyhow changing content of From and To headers was possible with remove_hf()/append_hf() or subst() functions, the new feature comes just to ease writing the config when one needs it. Cheers, Daniel -- Daniel-Constantin Mierla http://www.asipto.com/

4 4

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users August 2010