sr-users March 2009

sr-users@lists.kamailio.org

92 participants
149 discussions

by Parikhita Behera

Dera Sir In the SER based Switch , Billing is possible? If possible , what are the option possible like cdr , monthly trafic , termination status etc.... Waiting for your reply Thanks and Regards Parikhita Add more friends to your messenger and enjoy! Go to http://messenger.yahoo.com/invite/

15 years, 1 month

[Kamailio-Users] notls vs tls sources

by Luciano Afranllie

Hi everybody, May be this is a stupid question but I want to know what is the difference between kamailio-1.x.0-notls_src.tar.gz and kamailio-1.x.0-tls_src.tar.gz I guess it is tls support but INSTALL file of notls version talks about compile with TLS support, that is why I am asking... ... - compile with TLS or SCTP support make TLS=1 make SCTP=1 Thanks Luciano

15 years, 1 month

[Kamailio-Users] handling of DNS-SRV in kamailio-1.4.3 & 1.5.0

by Klaus Feichtinger

Hello, I have to relay SIP requests to a special "redundant" destination (= FQDN - e.g. "test.kamailio.loc") that consists of 3 hosts with different priorities. After startup Kamailio creates a DNS-SRV request to the DNS server and receives a response with following answer (e.g.): _sip._udp.test.kamailio.loc: type SRV, class IN, priority 10, weight 100, port 5060, target host1.test.kamailio.loc _sip._udp.test.kamailio.loc: type SRV, class IN, priority 20, weight 90, port 5060, target host2.test.kamailio.loc _sip._udp.test.kamailio.loc: type SRV, class IN, priority 30, weight 80, port 5060, target host3.test.kamailio.loc In worst case - if the prime and secondary host (host1 and host2) are unavailable - I expect that kamailio tries relaying the request to the third host in the list. But it doesn't. It makes retransmission of the original invite to the second host and does not try reaching the third host. For tuning the switchover to the alternative target(2) I have set the module parameter "fr_timer" for TM to 3 seconds (modparam("tm", "fr_timer", 3)). Is this behaviour of Kamailio-1.4.3 and Kamailio-1.5.0 (I've tested it with both versions) as expected (= limited to support only two answers in a DNS SRV reply)? Does anybody have experience with this scenario? Can anybody give me a hint? regards, Klaus F. -- Computer Bild Tarifsieger! GMX FreeDSL - Telefonanschluss + DSL für nur 17,95 Euro/mtl.!* http://dsl.gmx.de/?ac=OM.AD.PD003K11308T4569a

15 years, 1 month

[Kamailio-Users] install kamailio (openser) 1.5.0 from svn

by Daniel-Constantin Mierla

Hello, for those interested in installing kamailio (openser) 1.5.0 from SVN repository, I have created a new wiki page: http://www.kamailio.org/dokuwiki/doku.php/install:kamailio-1.5.x-from-svn If you find something missing or some error there, please update the page. Hope it's useful! Daniel -- Daniel-Constantin Mierla http://www.asipto.com

15 years, 1 month

[Kamailio-Users] Where are going my pua_dialoginfo publishes ?

by Eric PTAK

Hi, I'm trying to use *_dialoginfo modules but I'm facing to a missunderstanding, or a bug. In fact, the presence server is working and I'm also able to subscribe to dialog event. But when pua_dialoginfo uses pua to send the Publish, I don't know where it going... I even not sure publishes are really sent. This the log : DBG:dialog:run_create_callbacks: dialog=0xb59d30b0 DBG:pua_dialoginfo:__dialog_created: new INVITE dialog created: from=sip:alice@domain DBG:core:grep_aliases: comparing host [0:domain:0] with us [0:domain:0] DBG:core:grep_aliases: match found for: [0:domain:0] DBG:core:check_self: host == me DBG:pua_dialoginfo:build_dialoginfo: new_body: <?xml version="1.0"?> <dialog-info xmlns="urn:ietf:params:xml:ns:dialog-info" version="0" state="full" entity="sip:alice@domain"> <dialog id="MzQ3N2FiMzhiZGIwNzhhNDhhNjcxN2Y5OGJhY2M0N2Q." call-id="MzQ3N2FiMzhiZGIwNzhhNDhhNjcxN2Y5OGJhY2M0N2Q." direction="initiator"> <state>Trying</state> <remote> <identity>sip:bob@domain</identity> <target uri="sip:bob@domain"/> </remote> <local> <identity>sip:alice@domain</identity> <target uri="sip:alice@domain"/> </local> </dialog> </dialog-info> DBG:pua_dialoginfo:dialog_publish: publish uri= sip:alice@domain DBG:pua_dialoginfo:print_publ: publ: DBG:pua_dialoginfo:print_publ: uri= sip:alice@domain DBG:pua_dialoginfo:print_publ: id= DIALOG_PUBLISH.MzQ3N2FiMzhiZGIwNzhhNDhhNjcxN2Y5OGJhY2M0N2Q. DBG:pua_dialoginfo:print_publ: expires= 0 DBG:pua:send_publish: pres_uri=sip:alice@domain DBG:pua:search_htable: core_hash= 118 DBG:pua:search_htable: record not found DBG:pua:send_publish: insert type DBG:pua:send_publish: UPDATE_TYPE and no record found DBG:pua:send_publish: request for a publish with expires 0 and no record found DBG:dialog:get_dlg_timeout: invalid AVP value, use default timeout DBG:tm:run_reqin_callbacks: trans=0xb59d3270, callback type 1, id 0 entered Regards, Eric.

15 years, 1 month

[Kamailio-Users] Siremis 0.9.2 with Kamailio 1.5 on Debian 5.0

by mike＠agcusa.com

15 years, 1 month

Re: [Kamailio-Users] Newb doco request

by carl Lougher

Ha ha thanks guys. Who wants the 25cents? Ok i dont have an issue with Asterisk/Trixbox as i've been using that for years. I also dont have an issue with Kamailio installation. The issue i have though is that being a newbie to Kamailio i am struggling to understand and come up with a cfg file to allow the following. 1.To allow Kamailio to accept calls from a specific asterisk/trixbox (authentication would be best). 2.To forward all calls from Kamailio to the Sip provider (how do i set that up? No auth required for sip provider). 3.To apply rtp proxy or nathelper if required. 4.To send cdrs to a mysql database. I've had several attempts at writing stuff to the route part of the cfg file but it always fails to load. Is the best method to find the failure to use /var/log/messages? Thats about it and oh my amazon purchase of "Building Telphony systems with Openser" book turned up today so hopefully reading that might make a difference. Taff.. --- On Thu, 5/3/09, olivier.taylor(a)gmail.com <olivier.taylor(a)gmail.com> wrote: > From: olivier.taylor(a)gmail.com <olivier.taylor(a)gmail.com> > Subject: Re: [Kamailio-Users] Newb doco request > To: "Henning Westerholt" <henning.westerholt(a)1und1.de> > Cc: users(a)lists.kamailio.org > Date: Thursday, 5 March, 2009, 3:36 PM > > > > > > > Pesos, of course :) > > > > Olivier > > > > Henning Westerholt a écrit : > > On Thursday 05 March 2009, olivier taylor wrote: > > > 25 cents bounty, just to understand what's > his problem ;) > > > > euro- or dollar-cent? ;-) > > Henning > > _______________________________________________ > Kamailio (OpenSER) - Users mailing list > Users(a)lists.kamailio.org > http://lists.kamailio.org/cgi-bin/mailman/listinfo/users > http://lists.openser-project.org/cgi-bin/mailman/listinfo/users > > > > > > > > -----Inline Attachment Follows----- > > _______________________________________________ > Kamailio (OpenSER) - Users mailing list > Users(a)lists.kamailio.org > http://lists.kamailio.org/cgi-bin/mailman/listinfo/users > http://lists.openser-project.org/cgi-bin/mailman/listinfo/users

15 years, 1 month

[Kamailio-Users] problem with : arithmetic_operations

by BERGANZ François

Hello, I need to do arithmetic operations. I could do some test with having looks at : http://kamailio.org/dokuwiki/doku.php/core-cookbook:1.5.x#arithmetic_operati ons Simple opérations like $var(a)=1+1 works. But, when we have : $var(n)=0; while ($var(j)<$dbr(nb_max=>rows)){ $var(n) = $var(n) + $dbr(nb_max=>[0,$var(j)]); xlog("L_NOTICE", "log5 $var(n) + $dbr(nb_max=>[0,$var(j)]) \n"); ##à give us log5 0+10 where is the problem? Thank you Cordialement, BERGANZ François P Pensez à l'Environnement, n'imprimez ce mail que si nécessaire.

15 years, 1 month

Re: [Kamailio-Users] [SR-Dev] git on sourceforge

by Daniel-Constantin Mierla

IIRC some devels in the past asked for conversion from svn to gitin kamailio (openser), but at that time SF didn't offer it. Andrei started the discussion of how to maintain the parallel source trees for the two projects. We should get to a decision soon. Cheers, Daniel On 03/02/2009 03:01 PM, Jan Janak wrote: > FYI: > > http://apps.sourceforge.net/trac/sitedocs/wiki/Git > > Jan. > > _______________________________________________ > sr-dev mailing list > sr-dev(a)lists.sip-router.org > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev > -- Daniel-Constantin Mierla http://www.asipto.com

15 years, 1 month

[Kamailio-Users] Newb doco request

by carl Lougher

Hi, I'm after some useful doco to allow me to setup trunks from Trixbox to Kamailio and push all calls to a sip provider. Would possibly need rtpproxy or nathelper as well. Can anyone point me in the right direction as i've been combing the web for days and unable to find anything with good explanations and basic enough for a Kamailio beginner. Thanks, Taff.

15 years, 1 month

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users March 2009