sr-users August 2008

sr-users@lists.kamailio.org

144 participants
202 discussions

Re: [Kamailio-Users] CDRTool: no price showing
by Brian Del Shasta 05 Aug '08

05 Aug '08

David, After double checking, I do seem to be getting E.164 formatted numbers coming from the Cisco datasource, at least for the numbers we care about. Following is an example, you can see that I am able to successfully match a 1800 # as 1800, test (I just can't rate a price to it). id,StartTime,Username,CallerParty,Destination,DestinationId,DestinationName,Duration,Price,Gateway,KBIn,KBOut,Disconnect,Channel,Direction,CallType 1,2008-08-05 08:55:28,,5635833713,2415453,,,0,,208.66.128.72-ISDN-7,0,0,0,Normal release,ISDN 7/2:D:2,outgoing,Telephony 2,2008-08-05 08:55:28,,5635833713,2415453,,,0,,208.66.128.72-ISDN-7,0,0,0,Normal release,ISDN 7/0:D:1,incoming,Telephony 3,2008-08-05 08:55:11,,6082516000,19206750230,,,0,,208.66.128.72-ISDN-7,0,0,0,Normal release,ISDN 7/1:D:22,outgoing,Telephony 4,2008-08-05 08:55:11,,6082516000,19206750230,,,0,,,0,0,0,Normal release,,incoming,VoIP 5,2008-08-05 08:54:37,,6082888583,18004266918,1800,test,0,,208.66.128.72-ISDN-7,0,0,0,Normal release,ISDN 7/1:D:18,outgoing,Telephony On Fri, Aug 1, 2008 at 8:23 PM, David Villasmil < david.villasmil.work(a)gmail.com> wrote: > correct > > On Fri, Aug 1, 2008 at 8:11 PM, Brian Del Shasta <briandelshasta(a)gmail.com > > wrote: > >> Okay, I'm using a Cisco datasource, so I'm assuming that would replace >> OpenSER in the general schema, correct? >> >> _______________________________________________ >> Users mailing list >> Users(a)lists.kamailio.org >> http://lists.kamailio.org/cgi-bin/mailman/listinfo/users >> >> >

1 0

[Kamailio-Users] Problem With SipTrace Module
by Ali Jawad 05 Aug '08

05 Aug '08

Hi I did enable the siptrace module to be able to see SIP packets in TLS mode. Once I did set it up, I could not logon to the server anymore. The log file does not show anything : Aug 5 10:28:21 [30781] DBG:core:init_mod_child: type=PROC_MAIN, rank=0, module=acc Aug 5 10:28:21 [30781] DBG:core:init_mod_child: type=PROC_MAIN, rank=0, module=nathelper Aug 5 10:28:21 [30781] DBG:core:init_mod_child: type=PROC_MAIN, rank=0, module=siptrace Aug 5 10:28:21 [30793] DBG:mysql:db_mysql_new_connection: connection type is xxxxxxx via TCP/IP Aug 5 10:28:21 [30793] DBG:mysql:db_mysql_new_connection: protocol version is 10 Aug 5 10:28:21 [30793] DBG:mysql:db_mysql_new_connection: server version is 5.0.48 Aug 5 10:28:21 [30793] DBG:core:init_mod_child: type=PROC_TCP_MAIN, rank=-4, module=xlog Aug 5 10:28:21 [30793] DBG:xlog:child_init: init_child [-4] pid [30793] Aug 5 10:28:21 [30793] DBG:core:init_mod_child: type=PROC_TCP_MAIN, rank=-4, module=acc Aug 5 10:28:21 [30793] DBG:core:init_mod_child: type=PROC_TCP_MAIN, rank=-4, module=nathelper Aug 5 10:28:21 [30793] DBG:core:init_mod_child: type=PROC_TCP_MAIN, rank=-4, module=siptrace And the server is listening correctly. # ----------------- SIP Trace Info modparam("siptrace", "db_url", "mysql://mysql://openser:xxxxxxxxx@xxxxxxxxxxxx/openser") modparam("siptrace", "trace_on", 1) Regards

2 2

[OpenSER-Users] XMPP/SIP-SIMPLE Problem
by Cesar Troncoso 05 Aug '08

05 Aug '08

Hi everyone, I have a problem with xmpp module. Messages going from xmpp to sip-simple work fine. The problem I have is in the opposite direction (from sip-sipmle to xmpp). If I set fork=no or children=1 in my config file then all messages are sent and received in both directions. This is what I see in the logs: xmpp: invalid content-type 0x300ff xmpp: unable to write to command pipe: Bad file descriptor Any Idea how to overcome this situation? Thanks! Cesar

2 5

[Kamailio-Users] Message authorization via XCAP
by Adrian Georgescu 05 Aug '08

05 Aug '08

I put this on OpenXCAP roadmap. Regards, Adrian Yann Derichard schrieb: > Hi, > > I have already put in place presence via XCAP and now I would like to > add instant messaging to my system so I would like to know if it is > possible to use OpenSER to do MESSAGE authorization via XCAP (using > OpenXCAP). Hmm - interesting question. It would be good to have a generic framework to check SIP requests against privacy rules stored in XCAP server. does anyone have more knowledge about this? regards klaus

1 0

Re: [Kamailio-Users] Debugging Openser v1.4 scripts
by Jim Burke 05 Aug '08

05 Aug '08

Hi Daniel, After a lot of trial and error I have worked it out! The following portion of script causes the error in both 1.3 and 1.4, however not in 1.2. Root cause is that I have not added "" in my case statements. I.e. case 404: should be case "404": The var reply_status is set from PV $rs in a on_reply or on_failure route using $var(reply_status) = $rs;. switch($(var(reply_status))) { case 404: #Not Found xlog("L_INFO", "[$rm] from <$fu> <$si:$sp> to <$tu> Terminating UA Not Found R4\n"); seturi("sip:rva404@domain"); $(avp(early_code)) = "404"; $(avp(early_reason)) = "Not Found!"; append_hf("P-App-name: early_announcement\r\n"); append_hf("P-App-Param: Final-Reply-Code=$(avp(early_code));Final-Reply-Reason=$(avp(early_reason)); "); break; SNIP default: sl_send_reply("$(var(reply_status))","$(var(reply_reason)))"); xlog("L_INFO", "[$rm] from <$fu> <$si:$sp> to <$tu> Default Route 4\n"); exit; break; } Let me know if you consider this a bug and I will open a ticket. Regards, Jim -----Original Message----- From: Jim Burke [mailto:jim@evolutiontel.net] Sent: Saturday, 2 August 2008 11:28 PM To: miconda(a)gmail.com Cc: users(a)lists.kamailio.org Subject: RE: [Kamailio-Users] Debugging Openser v1.4 scripts Hi Daniel, Have been busy, will send yuo the config shortly. For my information how do you plan to find the corrupt line. Is there something in GDB that can help us set a tracepoint and identify it? Regards, Jim -----Original Message----- From: Daniel-Constantin Mierla [mailto:miconda@gmail.com] Sent: Wednesday, 30 July 2008 12:03 AM To: Jim Burke Cc: users(a)lists.kamailio.org Subject: Re: [Kamailio-Users] Debugging Openser v1.4 scripts Hello, On 07/29/08 15:43, Jim Burke wrote: > Hi All, > > We are working to get our script working on Version 1.4 and are having > problems debugging the script. Previously if I saw the following error in > the logs it would highlight the line and colomb numbers were the error > existed. Can someone help out? > > Jul 29 22:29:18 [19064] CRITICAL:core:yyerror: parse error in config file, > line 9459656, column 1-1: syntax error > Jul 29 22:29:18 [19064] CRITICAL:core:yyerror: parse error in config file, > line 9459656, column 1-1: bad command!) > Jul 29 22:29:18 [19064] ERROR:core:main: bad config file (2 errors) > it should still show the line and column where error occurred, but here is something wrong with the line. Can you obfuscate the private details in the config (passwords, ip addresses) and send it to me? Cheers, Daniel > Thanks, > Jim > > ------------------------------------------------------------------------ > > _______________________________________________ > Users mailing list > Users(a)lists.kamailio.org > http://lists.openser.org/cgi-bin/mailman/listinfo/users > -- Daniel-Constantin Mierla http://www.asipto.com

2 1

[Kamailio-Users] Message authorization via XCAP
by Yann Derichard 05 Aug '08

05 Aug '08

Hi, I have already put in place presence via XCAP and now I would like to add instant messaging to my system so I would like to know if it is possible to use OpenSER to do MESSAGE authorization via XCAP (using OpenXCAP). Regards. -- Yann Derichard

2 1

[Kamailio-Users] Cluecon
by Bogdan-Andrei Iancu 05 Aug '08

05 Aug '08

Hi, For people interested in meeting and chatting around the kamilio - opensips subject, in the next 3 days I will be present at ClueCon, in Chicago. So feel free to drop me an email ;) Best regards, Bogdan

1 0

[Kamailio-Users] I don't know why
by Tseveendorj Ochirlantuu 05 Aug '08

05 Aug '08

Dear developers, I don't know what is the reason they will go to two ways. /---- Kamailio OpenSER \---- openSIPS I hope these two project going to powerful. We need OpenSER related projects. I like them. Best regards, Tseveendorj

1 0

[Kamailio-Users] TLS with openser
by Ali Jawad 04 Aug '08

04 Aug '08

hi all Got some issues with tls my pstn gw does not support tls ..but I am using it between my clients and openser. The traffic is being sent encrypted to the pstn gw. I am using sethostport to forward traffic. any ides ? Thx

3 4

[Serusers] cannot create /tmp/ ser_fifo
by 静于 04 Aug '08

04 Aug '08

Hello all, I am trying to add a user to mysql database with the command: serctl add 1000 1000 1000(a)ser.com but I get a error: cannot create /tmp/ ser_fifo Any pointers to where to start debuging this error? Thanks. Best Regards. Ivy --------------------------------- 雅虎邮箱，您的终生邮箱！

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users August 2008