sr-users June 2008

sr-users@lists.kamailio.org

124 participants
230 discussions

[OpenSER-Users] Preserving original number when using alias_db_lookup

by Stagg Shelton

I found in the archives about how to preserve the original number when using alias_db_lookup. I am still learning OpenSER, and AVP is a challenge for me. I am looking for an example that I can use that can save the $rU in an avp before the alias_db_lookup and restore it afterwards. Thanks Stagg

15 years, 10 months

Re: [OpenSER-Users] I can't configure Diameter Client Server (DISC)

by Elena-Ramona Modroiu

Hi, check if the print.so exists. Also change in the config file the print module loading directive to module= print.so Regards, Ramona Florian Schildger wrote: > > Hi @ all, > > I want to built a Diameter-Client and –Server with disc, but it is > very tricky. Can someone help me? > > My plan is, a UA gives an invite to a SIP Express Router, this one > forwards the request to a DISC Client, which forwards the request to > the DISC Server and authenticate the UA. > My first problem is to start the DISC. > > What I did: > > 1. Download the disc with cvs and Install it > > cvs -d:pserver:anonymous@cvs.disc.berlios.de:/cvsroot/disc > <http://service.gmx.net/de/cgi/g.fcgi/mail/new?CUSTOMERNO=19451716&t=de13617…> > login > cvs -z3 -d:pserver:anonymous@cvs.disc.berlios.de:/cvsroot/disc > <http://service.gmx.net/de/cgi/g.fcgi/mail/new?CUSTOMERNO=19451716&t=de13617…> > co disc > ./rebuild > make > make install > > 2. Then Configure aaa_client.cfg > > 17 aaa_realm= 192.160.45 > 18 aaa_fqdn = 192.160.45:1810 > > 21 module_path= usr/local/lib/disc/client/ > 22 module= usr/local/lib/disc/client/print.so > > 32 peer= aaa://192.168.0.45:1812;transport=tcp # Server > 33 peer= aaa://192.168.0.45:5060;transport=tcp # SER > > 42 route= aaa://192.168.0.45:1812;transport=tcp > > # For the Modules I don't know what to do, because I couldn't find any > module!!! Only the print one, but I think I don'tneed it, do I? > > 3. After that I could't not start disc, because I had no File disc.cfg > in /usr/local/etc/disc/disc.cfg. What I did is copy the aaa_client.cfg > to disc.cfg > > cp /usr/local/disc/src/aaa_client.cfg /usr/local/etc/disc/disc.cfg > > 4. Then I start in the Console: > > debian:~# disc > qm_malloc(0xb7cab008, 11) called from cfg_parser.c: cfg_getstr(213) > qm_malloc(0xb7cab008, 12) returns address 0xb7cb148c frag. 0xb7cb1474 > (size=12) on 1 -th hit > qm_malloc(0xb7cab008, 16) called from cfg_parser.c: cfg_getstr(213) > qm_malloc(0xb7cab008, 16) returns address 0xb7cb14c8 frag. 0xb7cb14b0 > (size=16) on 1 -th hit > qm_malloc(0xb7cab008, 27) called from cfg_parser.c: cfg_getstr(213) > qm_malloc(0xb7cab008, 28) returns address 0xb7cb1508 frag. 0xb7cb14f0 > (size=28) on 1 -th hit > before loading the modules > loading module > usr/local/lib/disc/client/print.so...qm_malloc(0xb7cab008, 35) called > from cfg_parser.c: cfg_getstr(213) > qm_malloc(0xb7cab008, 36) returns address 0xb7cb1554 frag. 0xb7cb153c > (size=36) on 1 -th hit > ERROR: load_module: failed to load > <usr/local/lib/disc/client/print.so> in <client/modules>: > usr/local/lib/disc/client/print.so: cannot open shared object file: No > such file or directory > FAILED > ERROR (-1): on line 25 > ERROR: cannot init the core > ERROR:AAAClose: AAA library is not initialized > INFO:init_trans_manager: transaction manager stoped! > INFO:destroy_peer_manager: peer manager stoped > INFO:destroy_timer: timer thread stoped > qm_free(0xb7cab008, 0xb7cb148c), called from aaa_core.c: > destroy_aaa_core(576) > qm_free: freeing frag. 0xb7cb1474 alloc'ed from cfg_parser.c: > cfg_getstr(213) > qm_free(0xb7cab008, 0xb7cb14c8), called from aaa_core.c: > destroy_aaa_core(577) > qm_free: freeing frag. 0xb7cb14b0 alloc'ed from cfg_parser.c: > cfg_getstr(213) > qm_status (0xb7cab008): > heap size= 1022872 > used= 68, used+overhead=26012, free=996860 > max used (+overhead)= 26040 > dumping all allocked. fragments: > 0. N address=0xb7cb1458 frag=0xb7cb1440 size=4 > alloc'd from shm_mem.c: shm_mem_init_mallocs(185) > start check=f0f0f0f0, end check= c0c0c0c0, abcdefed > 3. N address=0xb7cb1508 frag=0xb7cb14f0 size=28 > alloc'd from cfg_parser.c: cfg_getstr(213) > start check=f0f0f0f0, end check= c0c0c0c0, abcdefed > 4. N address=0xb7cb1554 frag=0xb7cb153c size=36 > alloc'd from cfg_parser.c: cfg_getstr(213) > start check=f0f0f0f0, end check= c0c0c0c0, abcdefed > dumping free list stats : > hash= 3. fragments no.: 1 > hash= 4. fragments no.: 1 > hash= 521. fragments no.: 1 > ----------------------------- > shm_mem_destroy > destroying the shared memory lock > > > He could not load the module right? But where I can get it? How can I > use disc as Client and Server? I did only the configure for the > client! I read out, that disc only can work as an client or as an server. > > Can someone give me a hint? > > Cheers, Flo > > ------------------------------------------------------------------------ > > _______________________________________________ > Users mailing list > Users(a)lists.openser.org > http://lists.openser.org/cgi-bin/mailman/listinfo/users >

15 years, 10 months

[OpenSER-Users] avp_radius question

by Ricardo Martinez

Hello Is there a way to send in a radius request the Called and Callee information? The avp_radius module seems to what i need to do, but it works with "called only" or "callee only" formats. I need to send in a radius request both fields. Can someone help me here? Thanks Regards, Ricardo.-

15 years, 10 months

[OpenSER-Users] NEW FEATURE: local route for internally generated requests

by Bogdan-Andrei Iancu

Hi, OpenSER has a new type of route: local route. This route is to be executed when a brand new request is internally generated (openser being the UAC) ; such requests are result of : - t_uac_dlg MI command - msilo, sms, presence, cpl-c, dialog (and others) modules Purpose ======== This need route was added to meet the need to do dynamic manipulation (do some checking, adding headers, logging, etc) of the internally generated requests; without this new route, these requests were totally transparent for the openser script. Some strong cases there were debated for a long time on the lists: - adding new headers into internally generated requests - so far all kind of hacks were used to do it (like defining module parameters with predefined headers to be added in the request - see presence modules) - logging (log or xlog) information about the outgoing requests - see the discussion about the presence internal logging - accounting - there was no way to account these requests (as accounting can be triggered only from script) - see the discussion around the dialog module for how to account the BYEs generated by this module How to use =========== there is a single instance of this route allowed in the configuration: local_route { ...... } Note that not all the functions are allowed to be called from this route (better check the docs before) Example: local_route { .... if (is_method("NOTIFY")) { xlog("new $rm sent out for $ru via $du\n"); } .... if (is_method("BYE")) { acc_log_request("internal bye"); append_hf("X-note: terminated by dialog module"); } .... } Limitations ============ - you can access RURI and destination uri ($ru and $du), but any change of these value will be discarded - you cannot change the destination of the request - there is no transaction persistence (yet) - you cannot set onreply or failure routes, flags are not pushed into transaction ; this will be probably available in the next version. - accounting via flags do not work - as this requires transaction persistence (see above) Regards, Bogdan

15 years, 10 months

[OpenSER-Users] regarding openser v 1.2.0

by Naveen Kumar

Hi, when i tried to execute the following command i am getting peculiar error....please anybody can help me. [root@info sbin]# openserctl start database engine 'MYSQL' loaded Control engine 'FIFO' loaded Starting OpenSER : 19153 ? S 0:00 /bin/sh /usr/local/sbin/openserctl moni 19154 ? S 0:00 /bin/sh /usr/local/sbin/openserctl moni 19423 pts/9 S+ 0:00 /bin/sh /usr/local/sbin/openserctl start -rw-r--r-- 1 root root 0 Jun 26 23:56 /var/run/openser.pid INFO: PID file exists (/var/run/openser.pid)! OpenSER already running? your suggetions are very helpfull for my further proceedings, With Best Regards, Naveen.

15 years, 10 months

[OpenSER-Users] regarding openser v 1.2.0 installation

by Naveen Kumar

Hi all, I am new to the Openser.Now i am trying to install openser v 1.2.0 in centos 5. whilw installation process i am getting the following error. [root@info sbin]# openser_mysql.sh create MySQL password for root: Enter password: Enter password: creating database openser ... ERROR 1007 (HY000) at line 1: Can't create database 'openser'; database exists Creating core tables failed! Any one please help, for proceeding further installation. With Best Reagards, Naveen.

15 years, 10 months

[Serusers] no BYE

by Pezhman Lali

Hi Dear, I am using ser --> asterisk for outgoing calls. the ser does not send bye, if the caller hanging up. so, the session was not killed. plz help me . best

15 years, 10 months

Re: [OpenSER-Users] openser is not running

by Eliass Salim

Yes, but I think there is a problem with the makefile, because when I use "make all" the compilation stops on : Linking xlog.so gcc -shared -Wl,-O2 -Wl,-E xl_lib.o xlog.o -o xlog.so make[1]: Leaving directory `/usr/local/src/openser-1.3.0/sip-server/modules/xlog' cd utils/openserunix; make all make[1]: Entering directory `/usr/local/src/openser-1.3.0/sip-server/utils/openserunix' make[1]: Nothing to be done for `all'. make[1]: Leaving directory `/usr/local/src/openser-1.3.0/sip-server/utils/openserunix' if [ "no" = "yes" ]; then \ cd utils/db_berkeley; make all ; \ fi ; Eliass David Villasmil wrote: > Have you read ALL the documentation? > Have you looked for error in /var/log/syslog? > Do you understand the openser.cfg? > > > d > > On Wed, Jun 25, 2008 at 4:00 PM, Eliass Salim <salim(a)enseirb.fr > <mailto:salim@enseirb.fr>> wrote: > > hi, > > I've installed openser 1.3.0 ( by following instructions from > http://www.openser.org/dokuwiki/do [...] -from-svn) > <http://www.openser.org/dokuwiki/doku.php/install:openser-from-svn%29> > on my computer (fedora core 6,result of the command uname -a: Linux > park 2.6.20-1.2952.fc6 #1 SMP Wed May 16 17:59:13 EDT 2007 i686 i686 > i386 GNU/Linux), and when I launch OpenSER via /etc/ini.d/openser > start, > I've this: > [eliass@park ~]$ /etc/init.d/openser start > Starting openser: openser /var/run/openser/openser.pidListening on > udp: 127.0.0.1 <http://127.0.0.1> [127.0.0.1 > <http://127.0.0.1>]:5060 > udp: 192.168.10.110 <http://192.168.10.110> > [192.168.10.110 <http://192.168.10.110>]:5060 > tcp: 127.0.0.1 <http://127.0.0.1> [127.0.0.1 > <http://127.0.0.1>]:5060 > tcp: 192.168.10.110 <http://192.168.10.110> > [192.168.10.110 <http://192.168.10.110>]:5060 > Aliases: > tcp: localhost:5060 > udp: localhost:5060 > > . > [eliass@park ~]$ > > OK, but when I check Openser status via /etc/ini.d/openser, I've: > Status of openser: openser is not running. > So, I don't undrstand why. > Can you help me? > Thanks > > _______________________________________________ > Users mailing list > Users(a)lists.openser.org <mailto:Users@lists.openser.org> > http://lists.openser.org/cgi-bin/mailman/listinfo/users > >

15 years, 10 months

[Serusers] Re : Using OpenSER as Predictive Dialer for a Call Center ?

by deb ale

Do you concider sippy B2BUA? ----- Message d'origine ---- De : Arthur <pylinuxian(a)gmail.com> À : serusers(a)lists.iptel.org Envoyé le : Jeudi, 26 Juin 2008, 1h17mn 37s Objet : [Serusers] Using OpenSER as Predictive Dialer for a Call Center ? I am working on a project for a call center about programming an open source predictive dialer, and so far my research shows no sign of a competitor to Asterisk. I hope someone can guide me here, because I don't know yet whether OpenSER can be programmed to make calls automatically and if callees answers the calls hand the calls to agents ? .. allow agents to make transfers to other agents ... and other call center stuff. Thanks -- "He who asks a question may be a fool for a few minutes. He who does not ask may be a fool forever" _____________________________________________________________________________ Envoyez avec Yahoo! Mail. Une boite mail plus intelligente http://mail.yahoo.fr

15 years, 10 months

[OpenSER-Users] AVP's in openser.cfg

by Jason Penton

Hi * how do you pass AVP values to script functions in openser. if I do - myFunction("somestring",$avp(s:someotherstring)); - openser fails to load, and myFunction("somestring","$avp(s:someotherstring)"); - passes the actual AVP string to the script and not the evaluation of the AVP string Kind regards Jason

15 years, 10 months

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users June 2008