sr-users March 2008

sr-users@lists.kamailio.org

169 participants
238 discussions

[OpenSER-Users] Problem activating auth and auth_db modules using openser 1.3.1
by Pascal Maugeri 01 Apr '08

01 Apr '08

Hi My 1.3.1 server does not start when I activate the modules auth and auth_db modules with the following configuration: loadmodule "auth.so" loadmodule "auth_db.so" [...] modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "user_column", "username") modparam("auth_db", "password_column", "password") modparam("auth_db", "domain_column", "domain") modparam("auth_db", "db_url", "mysql://openser:openserrw@192.168.1.4 /openser") modparam("auth_db", "load_credentials", "") There is no error in the log file but no other module is loaded whenever I enable auth and auth_db. Is there anything else I should enable to configure these two modules ? When I disable the loading of these two modules everything works fine. Regards, Pascal

3 3

[Serusers] help required disabling DNS lookup
by geethanjali.csg＠wipro.com 01 Apr '08

01 Apr '08

Hi, I am trying to set up calls between 2 domains without using DNS lookup. UA -> domain1 -> domain2 -> UA I am using static forwarding route the all requests. Requests should be routed using this forward logic only. Both DNS lookup and forward logic are happening. Since I have not configured the DNS, an error "Unresolvable Destination" is seen by the UA. Ser log displays errors related to DNS lookup. I don't want the DNS lookup to happen. Requests should be routed using the forward logic only. Can someone help me solve this problem. Regards, Geethanjali C S Wipro Technologies The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments. WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. www.wipro.com

3 3

[OpenSER-Users] writing provider info in sip_trace mysql table.
by Itamar - IspBrasil 01 Apr '08

01 Apr '08

hi. anyone know if is possible to store information in sip_trace mysql table about the company who have completed the call ? example: outbund_company = xxx.xxx.xxx.xxxx -------------------- Itamar Reis Peixoto e-mail/msn: itamar(a)ispbrasil.com.br skype: itamarjp icq: 81053601 +55 11 4063 5033 +55 34 3221 8599

3 2

[OpenSER-Users] Effect of use_domain in registrar module
by Chahn Kim 31 Mar '08

31 Mar '08

Hi, all Currently we are running Openser 1.1 registering ATAs just with user name only. This works fine however it generates minor problem with our Python based monitoring script. The script was written under assumption of non blank domain list. resulting only showing those sessions where the user location table has domain field manually inserted. Before we switch to use_domain parameter to 1, We'd like to know any implicit effect of doing it, as well as some questions answered. Q. 1) Does this setting takes "SIP_DOMAIN" env parameter of server itself or the client ATA must send it to Openser in "REGISTER"? Q. 2) Once use_domain in registrar is set to 1, would there be any impacts on existing ATA entries in location table with blank domain? Q. 3) Are there any other parameter that are required to be changed along with use_domain in registrar module? Any comments will be appreciated. John Chahn Kim email: johnk(a)koreanet.us

2 1

[Serusers] Effect of use_domain in registrar module
by Chahn Kim 31 Mar '08

31 Mar '08

1 0

[OpenSER-Users] Res: OpenSER and radiusclient-ng [Unknown Attribute]
by Flavio Goncalves 31 Mar '08

31 Mar '08

Kyle, Check your radius dictionaries and the order of the includes. You are probably not including OpenSER (SIP) attributes. Regards, Flavio E. Goncalves ----- Mensagem original ---- De: Krom <kyle.romulas(a)gmail.com> Para: users(a)lists.openser.org Enviadas: Segunda-feira, 31 de Março de 2008 16:07:00 Assunto: [OpenSER-Users] OpenSER and radiusclient-ng [Unknown Attribute] Parallel posting this to both CDRTool users and OpenSER users, so apologies to members of both. I have installed the latest version of CDRTool and running it with OpenSER 1.1.1 for the time being. When looking at the tcpdump of the records leaving the OpenSER server via radiusclient-ng I am viewing a few 'Unknown Attribute' statements. Ex: Accounting Status Attribute (40), length: 6, Value: Start Service Type Attribute (6), length: 6, Value: #15 Unknown Attribute (102), length: 6, Value: Unknown Attribute (101), length: 6, Value: Username Attribute (1), length: 26, Value: +15552221111(a)x.x.x.x Calling Station Attribute (31), length: 24, Value: sip:+15552221111@x.x.x.x Called Station Attribute (30), length: 32, Value: sip:+15553334444@x.x.x.x Unknown Attribute (107), length: 35, Value: Accounting Session ID Attribute (44), length: 14, Value: 0d487415(a)mysipserver.com Unknown Attribute (104), length: 10, Value: Unknown Attribute (105), length: 7, Value: Unknown Attribute (103), length: 6, Value: Unknown Attribute (214), length: 15, Value: Unknown Attribute (215), length: 6, Value: Unknown Attribute (216), length: 32, Value: Event Timestamp Attribute (55), length: 6, Value: Thu Mar 27 11:01:23 2008 NAS IP Address Attribute (4), length: 6, Value: x.x.x.x NAS Port Attribute (5), length: 6, Value: 5060 Accounting Delay Attribute (41), length: 6, Value: 00 secs I have looked into the dictionary.ser and each of the Attributes are defined and the dictionary file that is defined in radiusclient.conf has the $INCLUDE dictionary.ser statement. Any hints, ideas or links would be appreciated. -- -- Krom kyle.romulas(a)gmail.com -----Anexo incorporado----- _______________________________________________ Users mailing list Users(a)lists.openser.org http://lists.openser.org/cgi-bin/mailman/listinfo/users

2 1

[OpenSER-Users] OpenSER and radiusclient-ng [Unknown Attribute]
by Krom 31 Mar '08

31 Mar '08

Parallel posting this to both CDRTool users and OpenSER users, so apologies to members of both. I have installed the latest version of CDRTool and running it with OpenSER 1.1.1 for the time being. When looking at the tcpdump of the records leaving the OpenSER server via radiusclient-ng I am viewing a few 'Unknown Attribute' statements. Ex: Accounting Status Attribute (40), length: 6, Value: Start Service Type Attribute (6), length: 6, Value: #15 Unknown Attribute (102), length: 6, Value: Unknown Attribute (101), length: 6, Value: Username Attribute (1), length: 26, Value: +15552221111(a)x.x.x.x Calling Station Attribute (31), length: 24, Value: sip:+15552221111@x.x.x.x Called Station Attribute (30), length: 32, Value: sip:+15553334444@x.x.x.x Unknown Attribute (107), length: 35, Value: Accounting Session ID Attribute (44), length: 14, Value: 0d487415(a)mysipserver.com Unknown Attribute (104), length: 10, Value: Unknown Attribute (105), length: 7, Value: Unknown Attribute (103), length: 6, Value: Unknown Attribute (214), length: 15, Value: Unknown Attribute (215), length: 6, Value: Unknown Attribute (216), length: 32, Value: Event Timestamp Attribute (55), length: 6, Value: Thu Mar 27 11:01:23 2008 NAS IP Address Attribute (4), length: 6, Value: x.x.x.x NAS Port Attribute (5), length: 6, Value: 5060 Accounting Delay Attribute (41), length: 6, Value: 00 secs I have looked into the dictionary.ser and each of the Attributes are defined and the dictionary file that is defined in radiusclient.conf has the $INCLUDE dictionary.ser statement. Any hints, ideas or links would be appreciated. -- -- Krom kyle.romulas(a)gmail.com

1 0

[OpenSER-Users] compile Openser 1.3.1 with module carrierroute
by Samael - 31 Mar '08

31 Mar '08

Hi, I tried to compile Openser 1.3.1 with module carrierroute on CentOS 5 in a 64 bits architecture. I compiled the confuse library and when I tried to compile Openser 1.3.1 with carrierroute module show me this error # make prefix=/ include_modules="mysql snmpstats carrierroute" modules ... /usr/bin/ld: /usr/local/lib/libconfuse.a(confuse.o): relocation R_X86_64_32 against `a local symbol' can not be used when making a shared object; recompile with -fPIC /usr/local/lib/libconfuse.a: could not read symbols: Bad value collect2: ld devolviÃ³ el estado de salida 1 make[1]: *** [carrierroute.so] Error 1 make[1]: se sale del directorio `/fuentes/openser/openser-1.3.1-tls /modules/carrierroute' make: *** [modules] Error 2 Can you help me? . If you need more information ask me . Best regards

2 1

[OpenSER-Users] unable to find dialog for BYE
by Jayesh Nambiar 31 Mar '08

31 Mar '08

Hi All, I have recently upgraded to openser 1.3.1 and I am trying to explore the Dialog module. I want to maintain the dialog for specific set of calls, so I have defined a route and I have written setflag(4) in that route so that all calls getting into that route will have the dialogs maintained. Flag 4 is defined for dialog module. Now when the call initiator hangs up; the dialog starts and ends properly but when the called party hangs up, I get this message in the syslog: " unable to find dialog for BYE" Can someone please guide me on how to interpret this WARNING and what measures should be taken to avoid the same. Thanks in advance w/regards, Jayesh Save all your chat conversations. Find them online at http://in.messenger.yahoo.com/webmessengerpromo.php

3 2

[OpenSER-Users] [FEATURE REQ] allow does_uri_exist() to test against other variables besides $ru
by Mike Fedyk 31 Mar '08

31 Mar '08

Hi, Is there a better way to test if a call is from a registered user without authentication than the code below? If not, then let me request that does_uri_exist() take an argument specifying the variable to test against. Mike if (src_ip != 'x.x.x.28' && !lookup("location")) { if (registered("location")) { xlog("L_NOTICE", "cs<$cs> si<$si:$sp> ci<$ci> route3: matched registered()\n"); } if (!registered("location")) { xlog("L_NOTICE", "cs<$cs> si<$si:$sp> ci<$ci> route3: matched !registered()\n"); } ### send DIDs to asterisk directly because it doesn't handle unauthenticated calls via a proxy properly #change request uri to from uri so that does_uri_exist() can test against it $var(orig_ru) = $ru; $ru = $fu; if (does_uri_exist()) { xlog("L_NOTICE", "cs<$cs> si<$si:$sp> ci<$ci> route3: matched does_uri_exist()\n"); } if (!does_uri_exist()) { xlog("L_NOTICE", "cs<$cs> si<$si:$sp> ci<$ci> route3: matched !does_uri_exist()\n"); } #10 digit DID and is not from one of our users if ($var(orig_ru) =~ "^sip:[0-9]{10}" && !does_uri_exist()) { xlog("L_NOTICE", "cs<$cs> si<$si:$sp> ci<$ci> route3: 302 redirect to asterisk\n"); $var(dstredir) = "sip:" + $tU + "@x.x.x.28"; $ru=$var(dstredir); sl_send_reply("302", "Moved Temporarily"); exit; #route(1); }; #END DIDs to asterisk and change request uri back $ru = $var(orig_ru); }

2 1

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users March 2008