sr-users March 2008

sr-users@lists.kamailio.org

169 participants
238 discussions

[OpenSER-Users] Configuring the openSER with the DISC gives problem
by dilip.m＠renovau.com 03 Mar '08

03 Mar '08

hello friends, I start openSER there are no errors (i.e. the auth_diameter module loads), but the DISC client complains that the peer is unknown. Both SER and the DISC client are running on the same machine, so I added aaa://localhost as a peer, but that does not seem to help. Openser can not communicate with diameter client. Regards, Dilip

3 3

[OpenSER-Users] openser+opendiameter issue---->kindly do reply
by bhargav.b＠renovau.com 03 Mar '08

03 Mar '08

hi all, if anybody have got the information regarding authenticating a user with the help of openser and opendiameter ,pleaase help me in doing that.it seems that i am really spoiling a lot of days in doing the same by my own. i have configured openser and opendiameter correctly and even they are communicating with each other.i have used the auth_diameter module of openser.but it seems there is some problem.on the client side of the opendiameter,i am getting a messege like"… [View More]

2 1

Re: [Serusers] SIP Express Bundle. Step 1.
by Mike Trest - Personal 02 Mar '08

02 Mar '08

Hi, This is to summarize my opinions about FC* distro use. IMHO, I think FC* is best selection as it contains many more fixes than does the older CENTOS (based on 5). I have deployed several hundred FC* boxes in VoIP applications. This is over 10,000 active ports without "Enterprise" stability issues. IMHO this project needs the quickest path to the Enterprise community regardless of the OS/distro used. I suppose the ultimate question is who is our target? Ourselves, naturally. … [View More]

7 14

[OpenSER-Users] Radius accounting
by Henri Keski-Sikkila 02 Mar '08

02 Mar '08

Hello, When radius accounting is in use and radius_extra is used like this: modparam("acc","radius_extra","Sip-Source-IP-Address=$si;Sip-Source-Port=$sp") and when freeradius gets an accounting-request packet, it includes: Sip-Source-IP-Address = 46.50.57.49 Sip-Source-Port = 808857653 Is this a known issue? BR, Henri Keski-Sikkila

3 5

[OpenSER-Users] Routing calls from PSTN
by Andy Smith 02 Mar '08

02 Mar '08

Hi list, I'd like to know, from others experience, what solutions might be best for configuring OpenSER routing from a PSTN gateway to multiple IP PBXs. I guess there may be various solutions ranging from quick and dirty to the other extreme but Id be interested to get some ideas what are typical solutions for others. As OpenSER is so configurable and there are so many optional modules its quite hard, coming from zero exposure to any production SIP envrionments, to know how best to go about this... thanks Andy.

2 1

[OpenSER-Users] Does t_realy chooseTCP/UDP protocol if it's necessary?
by Iñaki Baz Castillo 02 Mar '08

02 Mar '08

Hi, very strange: - I call to OpenSer using a TCP client. - The INVITE arrives via TCP to OpenSer. - I do: $rd=ASTERISK_IP; t_relay(); exit; - Asterisk only speaks UDP of course. - And OpenSer sends the INVITE to Asterisk by UDP. WHY does it work??? I hoped it would fail trying to forward the INVITE by TCP to Asterisk since I didn't force the outgoing socket, just the two lines above. Thanks for any explanation. -- Iñaki Baz Castillo

2 3

[OpenSER-Users] Setting smaller register "expires" value for TCP
by Iñaki Baz Castillo 01 Mar '08

01 Mar '08

Hi, in order to mantain TCP conecction with UACs behind NAT the only working solution (AFAIK) is setting register expires value smaller than the time UAC mantains open the TCP connection (value "x"). Certainly, I don't know which is the typical "x" value (i.e. Twinkle 1.2 that suports TCP mantains TCP connection for 32 seconds). Is 30 a good value? Of course, in UDP I use "OPTIONS" keepalive from OpenSer, so I don't need (and don't want) a very small register "expires" value. I just want … [View More]

2 2

[OpenSER-Users] LCR and Load Balancing, Routing
by Knud Müller 01 Mar '08

01 Mar '08

Hi, I'm pretty familiar with the asterisk, but have only little understanding of SER/OpenSER. I read through some cookbooks and found some things that might help, but I just want to ensure that I'm on the right track before investing a lot of time into it. I have an asterisk running that terminates currently against one (SIP) carrier. We are noticing that the carrier has an increasing rate of short outtages and want a more redundant solution. Currently we have two more carriers and have … [View More]

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users March 2008