sr-users September 2007

sr-users@lists.kamailio.org

158 participants
248 discussions

[Serusers] [Fwd: Re: domain name in route header]
by Klaus Darilion 24 Sep '07

24 Sep '07

forgot to cc the list ... -------- Original-Nachricht -------- Betreff: Re: domain name in route header Datum: Mon, 17 Sep 2007 18:58:33 +0200 Von: Klaus Darilion <klaus.mailinglists(a)pernau.at> An: Juha Heinanen <jh(a)tutpro.com> Referenzen: <18154.37441.743333.215104(a)tutpro.com> Juha Heinanen schrieb: > klaus, > > if you want to support domains in route headers, then you need to do > naptr and srv lookups for the domain when handling loose routing. it is > not enough to compare the domain to the ones domain module knows about. > domain in route header may namely be anything as long as it resolves to > your proxy. for this reason, i don't like the idea of domains in route > headers. it hurts performance far too much. I also do not like to configure openser all possible hostnames as alias - but it is not uncommon that the SIP domain is in the pre-loaded route - at least most exosip based clients do that. Thus, having support for those clients is IMO useful. regards klaus

2 1

[OpenSER-Users] How do I detect INVITE loop
by Andreas Sikkema 24 Sep '07

24 Sep '07

Hi, Is there a way for an OpenSER instance to detect if an incoming INVITE message has earlier been processed by itself? Record-Route is on, so there should be a Route message, but I suppose the Via headers could also contain the information. If it is detected I'd want OpenSER to ignore the incoming message, I suppose I could do nothing (no lookups etc.), but is there a better way? This is an issue because of the way we handle UA's registering at instance A and UA's registered at instance B wanting to call UA's at A. Due to race conditions with registrations going from A to B there are possible looping scenario's. -- Andreas Sikkema

2 1

[OpenSER-Users] Off topic: generating ringback tone from audio files
by Mark Anthony C. Delfin 24 Sep '07

24 Sep '07

Hi all, Is it possible to alter ring back tone on cisco gateways. For example I want change my ringback to an audio file. Some Mobile providers do this already. Thanks Mark D.

3 6

Re: [OpenSER-Users] how to register xlite user for testing with openser
by Live Great 24 Sep '07

24 Sep '07

Hi, in openser.cfg file, there is a route[4] section where also involve avp_db_load(): ######################################################################## # Request route 'usr-preferences-callee' ######################################################################## route[4] { xlog("L_INFO", "Load callee preferences for uuid '$avp(s:callee_uuid)' - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); # load callee avps avp_db_load("$avp(s:callee_uuid)", "*"); if(is_avp_set("$avp(s:cfu)/s")) { xlog("L_INFO", "Call-forward-unconditional to '$avp(s:cfu)' found - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); route(8); avp_delete("$avp(s:caller_uuid)/g"); avp_copy("$avp(s:callee_uuid)", "$avp(s:caller_uuid)/d"); avp_pushto("$ru", "$avp(s:cfu)"); route(3); route(14); exit; } if(is_avp_set("$avp(s:ringtimeout)/n")) { xlog("L_INFO", "Setting ring timeout to $avp(s:ringtimeout) secs - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); avp_copy("$avp(s:ringtimeout)", "$avp(s:callee_fr_inv_timer)/d"); } } ----- Original Message ---- From: Live Great <livegreat007(a)yahoo.com> To: Norman Brandinger <norm(a)goes.com> Cc: users(a)openser.org Sent: Monday, September 24, 2007 2:02:19 PM Subject: Re: [OpenSER-Users] how to register xlite user for testing with openser Hi, here is the configuration specific to avp_db_load in the openser.cfg file: route[3] { route(1); xlog("L_INFO", "Load caller preferences for uuid '$avp(s:caller_uuid)' - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); # load caller avps avp_db_load("$avp(s:caller_uuid)", "*"); avp_copy("$avp(s:cli)", "$avp(s:caller_cli)/d"); if(is_avp_set("$avp(s:clir)/n") && avp_check("$avp(s:clir)", "eq/i:1")) { # mark for anonymization setflag(28); } } I never change this configuration. Thanks SW ----- Original Message ---- From: Norman Brandinger <norm(a)goes.com> To: Live Great <livegreat007(a)yahoo.com> Sent: Monday, September 24, 2007 12:59:19 PM Subject: Re: [OpenSER-Users] how to register xlite user for testing with openser Are you issuing an avp_db_load() call with no value ? That might explain the error message. Probably be a good idea to post the config you are using. Regards, Norm Live Great wrote: > Hi, thanks very much for the suggestion. > I have added the required columns in the acc and missed_calls table. > Now when I tried to call an off-line number, it still show one error: > > ERROR:avpops:load_avps: no value for first param > > The errors related to the acc and missed_calls tables are already gone. > In xlite panel, the error message says "Call failed: Proxy > Authentication Required.". > I am not sure what happened if I call a on-line phone number. > > Thanks > SW > > ----- Original Message ---- > From: Norman Brandinger <norm(a)goes.com> > To: Live Great <livegreat007(a)yahoo.com> > Cc: users(a)openser.org > Sent: Sunday, September 23, 2007 10:50:38 PM > Subject: Re: [OpenSER-Users] how to register xlite user for testing > with openser > > Hi, > > The subscriber "username" IS the "phone number". The phone number field > in the subscriber table is only used by SERWEB. I believe the > "username" column name is better than "phone" because in SIP, the idea > of a telephone number is being blurred. > > Please refer to the online doc at: > http://openser.org/dokuwiki/doku.php/database:1.2.x#subscriber > > There is alot of material at the openser.org web site that can help you. > > The mediaproxy errors are a result of your script calling a mediaproxy > function but mediaproxy isn't running. This can be downloaded thanks to > AG Projects from http://ag-projects.com/MediaProxy.html > > The src_leg / dst_leg errors are a result of you trying to save > additional (accounting) fields into the "acc" and/or "missed_calls" > table. This is generally used for multi-leg call accounting (for > example, in a call forwarding situation where the initial callee changes > to the caller .. of the forwarded call). You will have to manually add > these column to the acc and missed_calls tables (varchar(64)) should be > fine for most purposes. > > Regards, > Norm > > Live Great wrote: > > Now is getting other errors. > > When I tried to dial a number, eg. 123 - the default Admin account, I > > got the following errors shown in /var/log/messages: > > > > ERROR:avpops:load_avps: no value for first param > > error: mediaproxy/sendMediaproxyCommand(): can't connect to MediaProxy > > error: mediaproxy/sendMediaproxyCommand(): can't connect to MediaProxy > > submit_query: Unknown column 'src_leg' in 'field list' > > db_insert: Error while submitting query > > ERROR:acc:acc_db_request: Error while inserting to database > > > > > > ----- Original Message ---- > > From: Norman Brandinger <norm@goes..com> > > To: Live Great <livegreat007(a)yahoo.com> > > Sent: Saturday, September 22, 2007 11:53:53 PM > > Subject: Re: [OpenSER-Users] how to register xlite user for testing > > with openser > > > > I believe the openser_mysql.sh script is being phased out. It has been > > replaced by openserdbctl (thanks to a big effort from Henning !!!). If > > your installation doesn't have /usr/local/sbin/openserdbctl I strongly > > suggest that you upgrade to a version of OpenSER that contains it. > > > > The rest of your settings appear to to be ok. > > > > Regards, > > Norm > > > > Live Great wrote: > > > > > > > > > ----- Original Message ---- > > > From: Norman Brandinger <norm(a)goes.com> > > > To: Live Great <livegreat007(a)yahoo.com> > > > Cc: users(a)openser.org > > > Sent: Saturday, September 22, 2007 9:43:54 PM > > > Subject: Re: [OpenSER-Users] how to register xlite user for testing > > > with openser > > > > > > Is is possible that you turned on database support but forgot to make > > > the database tables ? The error message you posted is pretty > explicit: > > > "Unknown column".... > > > I used openser_mysql.sh create to populate openser database and its > > > tables. > > > Here is all its tables: > > > mysql> show tables; > > > +-----------------------+ > > > | Tables_in_openser | > > > +-----------------------+ > > > | acc | > > > | active_sessions | > > > | active_watchers | > > > | address | > > > | admin_privileges | > > > | aliases | > > > | cpl | > > > | dbaliases | > > > | domain | > > > | domainpolicy | > > > | grp | > > > | gw | > > > | gw_grp | > > > | imc_members | > > > | imc_rooms | > > > | lcr | > > > | location | > > > | missed_calls | > > > | pdt | > > > | pending | > > > | phonebook | > > > | presentity | > > > | pua | > > > | re_grp | > > > | server_monitoring | > > > | server_monitoring_agg | > > > | silo | > > > | sip_trace | > > > | speed_dial | > > > | subscriber | > > > | trusted | > > > | uri | > > > | usr_preferences | > > > | usr_preferences_types | > > > | version | > > > | watchers | > > > | xcap_xml | > > > +-----------------------+ > > > 37 rows in set (0.00 sec) > > > > > > > > > > > > The warnings about missing permissions files can be ignored > (unless you > > > really do need them), but in your case, it seems that you are not at > > > that point yet. > > > > > > Take a look at openserdbctl as it automates the process of > creating the > > > database and tables needed by the various openser > modules. openserctlrc > > > (usually located in /usr/local/etc/openser) contains a number of > startup > > > settings, some of which are database related. > > > > > > The standard request you will receive from people trying to assist you > > > is to post your config file (or at least the interesting sections of > > it). > > > > > > The part of the content of openser.cfg is: > > > listen = udp:127.0.0.1:5060 > > > listen = udp:125.255.1.2:5060 > > > mpath = "/usr/local/lib/openser/modules" > > > children = 8 > > > debug = 3 > > > fork = yes > > > group = "openser" > > > user = "openser" > > > disable_tcp = no > > > log_facility = LOG_DAEMON > > > #log_facility = LOG_LOCAL7 > > > log_stderror = no > > > tcp_children = 4 > > > mhomed = no > > > server_signature = yes > > > sock_group = "openser" > > > sock_mode = 0600 > > > sock_user = "openser" > > > unix_sock = "/tmp/openser.sock" > > > unix_sock_children = 1 > > > reply_to_via = no > > > sip_warning = no > > > check_via = no > > > dns = no > > > rev_dns = no > > > disable_core_dump = no > > > dns_try_ipv6 = yes > > > dns_use_search_list = yes > > > > > > openserctlrc: > > > ## your SIP domain > > > SIP_DOMAIN=ip6.com.au > > > > > > ## database type: MYSQL or PGSQL, by defaulte none is loaded > > > DBENGINE=MYSQL > > > > > > ## database host > > > DBHOST=localhost > > > > > > ## database name > > > DBNAME=openser > > > > > > ## database read/write user > > > DBRWUSER=openser > > > # DBRWUSER=admin > > > > > > ## database read only user > > > DBROUSER=openserro > > > > > > ## password for database read only user > > > DBROPW=openserro > > > > > > ## database super user > > > DBROOTUSER="root" > > > > > > HAS_SERWEB="yes" > > > > > > I am not too sure the correct way to define openserctlrc file.. > > > Your comment is much appreciated. > > > > > > Thanks > > > SW > > > > > > Norm > > > > > > Live Great wrote: > > > > Hi, > > > > > > > > After changed the port 5077 to 5060 in openser.cfg file, restarted > > > > openser. > > > > When xlite initiate a registartion request, openser system log file > > > > shown a different message: > > > > Sep 22 16:18:55 core /usr/local/sbin/openser[49941]: Default allow > > > > file (/usr/local/etc/openser/permissions.allow) not found => empty > > > > rule set > > > > Sep 22 16:18:55 core /usr/local/sbin/openser[49941]: WARNING: > File not > > > > found: /usr/local/etc/openser/permissions.deny > > > > Sep 22 16:18:55 core /usr/local/sbin/openser[49941]: Default > deny file > > > > (/usr/local/etc/openser/permissions.deny) not found => empty > rule set > > > > Sep 22 16:19:01 core /usr/local/sbin/openser[49953]: submit_query: > > > > Unknown column 'uuid' in 'field list' > > > > Sep 22 16:19:01 core /usr/local/sbin/openser[49953]: db_query: Error > > > > while submitting query > > > > Sep 22 16:19:01 core /usr/local/sbin/openser[49953]: get_ha1(): > Error > > > > while querying database > > > > Sep 22 16:19:04 core /usr/local/sbin/openser[49956]: submit_query: > > > > Unknown column 'uuid' in 'field list' > > > > Sep 22 16:19:04 core /usr/local/sbin/openser[49956]: db_query: Error > > > > while submitting query > > > > Sep 22 16:19:04 core /usr/local/sbin/openser[49956]: get_ha1(): > Error > > > > while querying database > > > > Sep 22 16:19:06 core /usr/local/sbin/openser[49957]: submit_query: > > > > Unknown column 'uuid' in 'field list' > > > > Sep 22 16:19:06 core /usr/local/sbin/openser[49957]: db_query: Error > > > > while submitting query > > > > Sep 22 16:19:06 core /usr/local/sbin/openser[49957]: get_ha1(): > Error > > > > while querying database > > > > Sep 22 16:19:08 core /usr/local/sbin/openser[49952]: submit_query: > > > > Unknown column 'uuid' in 'field list' > > > > Sep 22 16:19:08 core /usr/local/sbin/openser[49952]: db_query: Error > > > > while submitting query > > > > Sep 22 16:19:08 core /usr/local/sbin/openser[49952]: get_ha1(): > Error > > > > while querying database > > > > Sep 22 16:19:08 core /usr/local/sbin/openser[49954]: submit_query: > > > > Unknown column 'uuid' in 'field list' > > > > Sep 22 16:19:08 core /usr/local/sbin/openser[49954]: db_query: Error > > > > while submitting query > > > > Sep 22 16:19:08 core /usr/local/sbin/openser[49954]: get_ha1(): > Error > > > > while querying database > > > > Sep 22 16:19:09 core /usr/local/sbin/openser[49955]: submit_query: > > > > Unknown column 'uuid' in 'field list' > > > > Sep 22 16:19:09 core /usr/local/sbin/openser[49955]: db_query: Error > > > > while submitting query > > > > Sep 22 16:19:09 core /usr/local/sbin/openser[49955]: get_ha1(): > Error > > > > while querying database > > > > Sep 22 16:19:11 core /usr/local/sbin/openser[49957]: submit_query: > > > > Unknown column 'uuid' in 'field list' > > > > Sep 22 16:19:11 core /usr/local/sbin/openser[49957]: db_query: Error > > > > while submitting query > > > > Sep 22 16:19:11 core /usr/local/sbin/openser[49957]: get_ha1(): > Error > > > > while querying database > > > > Sep 22 16:19:13 core /usr/local/sbin/openser[49959]: submit_query: > > > > Unknown column 'uuid' in 'field list' > > > > Sep 22 16:19:13 core /usr/local/sbin/openser[49959]: db_query: Error > > > > while submitting query > > > > Sep 22 16:19:13 core /usr/local/sbin/openser[49959]: get_ha1(): > Error > > > > while querying database > > > > Sep 22 16:19:14 core /usr/local/sbin/openser[49952]: submit_query: > > > > Unknown column 'uuid' in 'field list' > > > > Sep 22 16:19:14 core /usr/local/sbin/openser[49952]: db_query: Error > > > > while submitting query > > > > Sep 22 16:19:14 core /usr/local/sbin/openser[49952]: get_ha1(): > Error > > > > while querying database > > > > Sep 22 16:19:16 core /usr/local/sbin/openser[49954]: submit_query: > > > > Unknown column 'uuid' in 'field list' > > > > Sep 22 16:19:16 core /usr/local/sbin/openser[49954]: db_query: Error > > > > while submitting query > > > > Sep 22 16:19:16 core /usr/local/sbin/openser[49954]: get_ha1(): > Error > > > > while querying database > > > > Sep 22 16:19:16 core /usr/local/sbin/openser[49955]: submit_query: > > > > Unknown column 'uuid' in 'field list' > > > > Sep 22 16:19:16 core /usr/local/sbin/openser[49955]: db_query: Error > > > > while submitting query > > > > Sep 22 16:19:16 core /usr/local/sbin/openser[49955]: get_ha1(): > Error > > > > while querying database > > > > Sep 22 16:19:21 core /usr/local/sbin/openser[49957]: submit_query: > > > > Unknown column 'uuid' in 'field list' > > > > Sep 22 16:19:21 core /usr/local/sbin/openser[49957]: db_query: Error > > > > while submitting query > > > > Sep 22 16:19:21 core /usr/local/sbin/openser[49957]: get_ha1(): > Error > > > > while querying database > > > > Sep 22 16:19:22 core /usr/local/sbin/openser[49952]: submit_query: > > > > Unknown column 'uuid' in 'field list' > > > > Sep 22 16:19:22 core /usr/local/sbin/openser[49952]: db_query: Error > > > > while submitting query > > > > Sep 22 16:19:22 core /usr/local/sbin/openser[49952]: get_ha1(): > Error > > > > while querying database > > > > Sep 22 16:19:29 core /usr/local/sbin/openser[49954]: submit_query: > > > > Unknown column 'uuid' in 'field list' > > > > Sep 22 16:19:29 core /usr/local/sbin/openser[49954]: db_query: Error > > > > while submitting query > > > > Sep 22 16:19:29 core /usr/local/sbin/openser[49954]: get_ha1(): > Error > > > > while querying database > > > > Sep 22 16:19:42 core /usr/local/sbin/openser[49956]: submit_query: > > > > Unknown column 'uuid' in 'field list' > > > > Sep 22 16:19:42 core /usr/local/sbin/openser[49956]: db_query: Error > > > > while submitting query > > > > Sep 22 16:19:42 core /usr/local/sbin/openser[49956]: get_ha1(): > Error > > > > while querying database > > > > Sep 22 16:19:46 core /usr/local/sbin/openser[49958]: submit_query: > > > > Unknown column 'uuid' in 'field list' > > > > Sep 22 16:19:46 core /usr/local/sbin/openser[49958]: db_query: Error > > > > while submitting query > > > > Sep 22 16:19:46 core /usr/local/sbin/openser[49958]: get_ha1(): > Error > > > > while querying database > > > > > > > > In Xlite, it said Registration error 500, server internal error.. > > > > What is possibility wrong in my openser server configuration? > > > > > > > > > > > > Thanks > > > > SW > > > > > > > > ----- Original Message ---- > > > > From: Live Great <livegreat007(a)yahoo.com> > > > > To: users(a)openser.org > > > > Sent: Saturday, September 22, 2007 2:03:07 PM > > > > Subject: [OpenSER-Users] how to register xlite user for testing with > > > > openser > > > > > > > > Hi, > > > > > > > > I used the following command to add xlite user, but xlite failed to > > > > register the user in openser server. > > > > # openserctl add 1234 1234 sam(a)my.domain.com > > > > > > > > where 1234 is user id and password. > > > > > > > > If this is not the correct way to add user for testing from xlite to > > > > openser, what are the alternative way I can use? > > > > > > > > > > > > Thanks > > > > SW > > > > > > > > > > ------------------------------------------------------------------------ > > > > > > > > _______________________________________________ > > > > Users mailing list > > > > Users(a)openser.org > > > > http://openser.org/cgi-bin/mailman/listinfo/users > > > > > > > > > > > > > > > >

2 1

[OpenSER-Users] perl + unixODBC
by Murilo Lacerda Yoshida 24 Sep '07

24 Sep '07

Hello all, I'm new in the list, so first of all I would like to say hi to all the list and say that openSer is a fantastic product, and that the documentation available on the internet is also fantastic. I managed to get my openSer server working with advanced features without having to subscribe to this list. Well, but if I subscribed, is because something has gone bad. Ok. The company I work for has a system for handling prepaid and postpaid calls. And I was designed to develop a new alternative for handling these prepaid and postpaid calls via VOIP, so I chose openSer as the server, after googleing on the web. One condition I had since the start is that I would have to integrate the solution to the company's DB, and that was another reason why I chose openSer, because of the perl module. With it I could write a script that would do that integration for me. So I started installing and developing the openSer server with the perl scripts. And it worked fine! The server did all that it had to do. So I went to the tests. First test: load test... And it fails for many reasons. After investigating I discovered that the debug option in the openser.cfg is very important in high load contexts. A debug value greater than 2 or 3 will decrease greatly the server's performance. I had to do some code cleanings in the openser.cfg and perl scripts also. The other and main reason is that for some unknown reason the openSer server crashes when using perl scripts that communicate with DB in high load contexts. For some reason the perl script receives a sig_segv (segmentation fault) and this signal is passed to all others threads and then the openSer server dies. This error is that kind of error that is specially difficult to find, because there are too many different systems involded. The path from openSer to the DB would be: openSer -> perl module -> perl -> perl DBI (DBD::ODBC) -> unixODBC -> FreeTDS -> MS SQLServer Can you guys provide me some light in fixing this problem? Thanks in advance, Murilo Yoshida

2 1

Re: [OpenSER-Users] Do we like the same books?
by Henning Westerholt 24 Sep '07

24 Sep '07

On Sunday 23 September 2007, rizwan_hisham wrote: > Just a friendly reminder that I invited you to Shelfari. Come see the books > I love and see if we have any in common. Then pick my next book so I can > keep on reading. Hello Rizwan, hello voipexpert, could you please stop to send this invitation to this book service to the user list? Some people considers such messages as spam. And please also stop this repeated invitations to my personal address to, i don't want to be invited and get already enough unwanted e-mail. Thank you, Henning Westerholt

1 0

Re: [Serusers] SER+Mediaproxy + X-LITE in the same LAN.
by pistara_bros＠tin.it 24 Sep '07

24 Sep '07

Bon jour à tout le monde, I have other news about my investigation on Mediaproxy and SER in the same Lan. In the first test i used X-lite, as UA clients, running on windowsXP and i saw that RTP traffic didn't pass through MEDIAproxy (IP 192.168.123.186). Now i'm using the client "Express Talk" runnig on windows XP (IP 192.168.123.168) and X-lite runnig on windows XP (IP 192.168.123.10) and I see that MEDIAproxy work correctly because works as "man in the middle" and proxies the RTP packets between two clients. Seems that it's necessary that one of two clients must be Express Talk, in order to Mediaproxy work correctly. I observe that, if one client is Express Talk, the second client could be X-lite or Yate or TiVi (http://m.tivi.com/) and MediaProxy work OK. But why Mediaproxy work correctly only if i use "Express Talk" as one peer client?? Any ideas? Target clients for my operational environment will be TiVi (http://m.tivi.com/) and i want that using them the RTP packet pass through Mediaproxy. There's anyone (sherlock holmes) in the forum that could solve the mystery? thanks a lot. >Hi all, i'm newbie in SER, >I want to route RTP packets between 2 >computers with x-lite client voip >in the same network through >Mediaproxy. I know this may have >no sense, but it's just a test >configuration. >The call use_media_proxy() seems to have no effect, >the RTP packets go directly from one computer to >another, no packet trough Mediaproxy. >This is my environment: >SER and Mediaproxy on the same PC >(192.168.123.186) >X-lite client_A running on 192.168.123.10 >X-lite >client_B running on 192.168.123.168 >Client_A call Client_B that accept, >but mediaproxy refuses to >proxy the call. >Is mediaproxy >working just between different networks >or it's an error in my >configuration file? >Please help me. Any suggestions? >Orazio

2 1

Re: [OpenSER-Users] how to register xlite user for testing with openser
by Live Great 24 Sep '07

24 Sep '07

Hi, in openser.cfg file, there is a route[4] section where also involve avp_db_load(): ######################################################################## # Request route 'usr-preferences-callee' ######################################################################## route[4] { xlog("L_INFO", "Load callee preferences for uuid '$avp(s:callee_uuid)' - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); # load callee avps avp_db_load("$avp(s:callee_uuid)", "*"); if(is_avp_set("$avp(s:cfu)/s")) { xlog("L_INFO", "Call-forward-unconditional to '$avp(s:cfu)' found - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); route(8); avp_delete("$avp(s:caller_uuid)/g"); avp_copy("$avp(s:callee_uuid)", "$avp(s:caller_uuid)/d"); avp_pushto("$ru", "$avp(s:cfu)"); route(3); route(14); exit; } if(is_avp_set("$avp(s:ringtimeout)/n")) { xlog("L_INFO", "Setting ring timeout to $avp(s:ringtimeout) secs - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); avp_copy("$avp(s:ringtimeout)", "$avp(s:callee_fr_inv_timer)/d"); } } ----- Original Message ---- From: Live Great <livegreat007(a)yahoo.com> To: Norman Brandinger <norm(a)goes.com> Cc: users(a)openser.org Sent: Monday, September 24, 2007 2:02:19 PM Subject: Re: [OpenSER-Users] how to register xlite user for testing with openser Hi, here is the configuration specific to avp_db_load in the openser.cfg file: route[3] { route(1); xlog("L_INFO", "Load caller preferences for uuid '$avp(s:caller_uuid)' - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); # load caller avps avp_db_load("$avp(s:caller_uuid)", "*"); avp_copy("$avp(s:cli)", "$avp(s:caller_cli)/d"); if(is_avp_set("$avp(s:clir)/n") && avp_check("$avp(s:clir)", "eq/i:1")) { # mark for anonymization setflag(28); } } I never change this configuration. Thanks SW ----- Original Message ---- From: Norman Brandinger <norm(a)goes.com> To: Live Great <livegreat007(a)yahoo.com> Sent: Monday, September 24, 2007 12:59:19 PM Subject: Re: [OpenSER-Users] how to register xlite user for testing with openser Are you issuing an avp_db_load() call with no value ? That might explain the error message. Probably be a good idea to post the config you are using. Regards, Norm Live Great wrote: > Hi, thanks very much for the suggestion. > I have added the required columns in the acc and missed_calls table. > Now when I tried to call an off-line number, it still show one error: > > ERROR:avpops:load_avps: no value for first param > > The errors related to the acc and missed_calls tables are already gone. > In xlite panel, the error message says "Call failed: Proxy > Authentication Required.". > I am not sure what happened if I call a on-line phone number. > > Thanks > SW > > ----- Original Message ---- > From: Norman Brandinger <norm(a)goes.com> > To: Live Great <livegreat007(a)yahoo.com> > Cc: users(a)openser.org > Sent: Sunday, September 23, 2007 10:50:38 PM > Subject: Re: [OpenSER-Users] how to register xlite user for testing > with openser > > Hi, > > The subscriber "username" IS the "phone number". The phone number field > in the subscriber table is only used by SERWEB. I believe the > "username" column name is better than "phone" because in SIP, the idea > of a telephone number is being blurred. > > Please refer to the online doc at: > http://openser.org/dokuwiki/doku.php/database:1.2.x#subscriber > > There is alot of material at the openser.org web site that can help you. > > The mediaproxy errors are a result of your script calling a mediaproxy > function but mediaproxy isn't running. This can be downloaded thanks to > AG Projects from http://ag-projects.com/MediaProxy.html > > The src_leg / dst_leg errors are a result of you trying to save > additional (accounting) fields into the "acc" and/or "missed_calls" > table. This is generally used for multi-leg call accounting (for > example, in a call forwarding situation where the initial callee changes > to the caller .. of the forwarded call). You will have to manually add > these column to the acc and missed_calls tables (varchar(64)) should be > fine for most purposes. > > Regards, > Norm > > Live Great wrote: > > Now is getting other errors. > > When I tried to dial a number, eg. 123 - the default Admin account, I > > got the following errors shown in /var/log/messages: > > > > ERROR:avpops:load_avps: no value for first param > > error: mediaproxy/sendMediaproxyCommand(): can't connect to MediaProxy > > error: mediaproxy/sendMediaproxyCommand(): can't connect to MediaProxy > > submit_query: Unknown column 'src_leg' in 'field list' > > db_insert: Error while submitting query > > ERROR:acc:acc_db_request: Error while inserting to database > > > > > > ----- Original Message ---- > > From: Norman Brandinger <norm(a)goes.com> > > To: Live Great <livegreat007(a)yahoo.com> > > Sent: Saturday, September 22, 2007 11:53:53 PM > > Subject: Re: [OpenSER-Users] how to register xlite user for testing > > with openser > > > > I believe the openser_mysql.sh script is being phased out. It has been > > replaced by openserdbctl (thanks to a big effort from Henning !!!). If > > your installation doesn't have /usr/local/sbin/openserdbctl I strongly > > suggest that you upgrade to a version of OpenSER that contains it. > > > > The rest of your settings appear to to be ok. > > > > Regards, > > Norm > > > > Live Great wrote: > > > > > > > > > ----- Original Message ---- > > > From: Norman Brandinger <norm(a)goes.com> > > > To: Live Great <livegreat007(a)yahoo.com> > > > Cc: users(a)openser.org > > > Sent: Saturday, September 22, 2007 9:43:54 PM > > > Subject: Re: [OpenSER-Users] how to register xlite user for testing > > > with openser > > > > > > Is is possible that you turned on database support but forgot to make > > > the database tables ? The error message you posted is pretty > explicit: > > > "Unknown column".... > > > I used openser_mysql.sh create to populate openser database and its > > > tables. > > > Here is all its tables: > > > mysql> show tables; > > > +-----------------------+ > > > | Tables_in_openser | > > > +-----------------------+ > > > | acc | > > > | active_sessions | > > > | active_watchers | > > > | address | > > > | admin_privileges | > > > | aliases | > > > | cpl | > > > | dbaliases | > > > | domain | > > > | domainpolicy | > > > | grp | > > > | gw | > > > | gw_grp | > > > | imc_members | > > > | imc_rooms | > > > | lcr | > > > | location | > > > | missed_calls | > > > | pdt | > > > | pending | > > > | phonebook | > > > | presentity | > > > | pua | > > > | re_grp | > > > | server_monitoring | > > > | server_monitoring_agg | > > > | silo | > > > | sip_trace | > > > | speed_dial | > > > | subscriber | > > > | trusted | > > > | uri | > > > | usr_preferences | > > > | usr_preferences_types | > > > | version | > > > | watchers | > > > | xcap_xml | > > > +-----------------------+ > > > 37 rows in set (0.00 sec) > > > > > > > > > > > > The warnings about missing permissions files can be ignored > (unless you > > > really do need them), but in your case, it seems that you are not at > > > that point yet. > > > > > > Take a look at openserdbctl as it automates the process of > creating the > > > database and tables needed by the various openser > modules. openserctlrc > > > (usually located in /usr/local/etc/openser) contains a number of > startup > > > settings, some of which are database related. > > > > > > The standard request you will receive from people trying to assist you > > > is to post your config file (or at least the interesting sections of > > it). > > > > > > The part of the content of openser.cfg is: > > > listen = udp:127.0.0.1:5060 > > > listen = udp:125.255.1.2:5060 > > > mpath = "/usr/local/lib/openser/modules" > > > children = 8 > > > debug = 3 > > > fork = yes > > > group = "openser" > > > user = "openser" > > > disable_tcp = no > > > log_facility = LOG_DAEMON > > > #log_facility = LOG_LOCAL7 > > > log_stderror = no > > > tcp_children = 4 > > > mhomed = no > > > server_signature = yes > > > sock_group = "openser" > > > sock_mode = 0600 > > > sock_user = "openser" > > > unix_sock = "/tmp/openser.sock" > > > unix_sock_children = 1 > > > reply_to_via = no > > > sip_warning = no > > > check_via = no > > > dns = no > > > rev_dns = no > > > disable_core_dump = no > > > dns_try_ipv6 = yes > > > dns_use_search_list = yes > > > > > > openserctlrc: > > > ## your SIP domain > > > SIP_DOMAIN=ip6.com.au > > > > > > ## database type: MYSQL or PGSQL, by defaulte none is loaded > > > DBENGINE=MYSQL > > > > > > ## database host > > > DBHOST=localhost > > > > > > ## database name > > > DBNAME=openser > > > > > > ## database read/write user > > > DBRWUSER=openser > > > # DBRWUSER=admin > > > > > > ## database read only user > > > DBROUSER=openserro > > > > > > ## password for database read only user > > > DBROPW=openserro > > > > > > ## database super user > > > DBROOTUSER="root" > > > > > > HAS_SERWEB="yes" > > > > > > I am not too sure the correct way to define openserctlrc file.. > > > Your comment is much appreciated. > > > > > > Thanks > > > SW > > > > > > Norm > > > > > > Live Great wrote: > > > > Hi, > > > > > > > > After changed the port 5077 to 5060 in openser.cfg file, restarted > > > > openser. > > > > When xlite initiate a registartion request, openser system log file > > > > shown a different message: > > > > Sep 22 16:18:55 core /usr/local/sbin/openser[49941]: Default allow > > > > file (/usr/local/etc/openser/permissions.allow) not found => empty > > > > rule set > > > > Sep 22 16:18:55 core /usr/local/sbin/openser[49941]: WARNING: > File not > > > > found: /usr/local/etc/openser/permissions.deny > > > > Sep 22 16:18:55 core /usr/local/sbin/openser[49941]: Default > deny file > > > > (/usr/local/etc/openser/permissions.deny) not found => empty > rule set > > > > Sep 22 16:19:01 core /usr/local/sbin/openser[49953]: submit_query: > > > > Unknown column 'uuid' in 'field list' > > > > Sep 22 16:19:01 core /usr/local/sbin/openser[49953]: db_query: Error > > > > while submitting query > > > > Sep 22 16:19:01 core /usr/local/sbin/openser[49953]: get_ha1(): > Error > > > > while querying database > > > > Sep 22 16:19:04 core /usr/local/sbin/openser[49956]: submit_query: > > > > Unknown column 'uuid' in 'field list' > > > > Sep 22 16:19:04 core /usr/local/sbin/openser[49956]: db_query: Error > > > > while submitting query > > > > Sep 22 16:19:04 core /usr/local/sbin/openser[49956]: get_ha1(): > Error > > > > while querying database > > > > Sep 22 16:19:06 core /usr/local/sbin/openser[49957]: submit_query: > > > > Unknown column 'uuid' in 'field list' > > > > Sep 22 16:19:06 core /usr/local/sbin/openser[49957]: db_query: Error > > > > while submitting query > > > > Sep 22 16:19:06 core /usr/local/sbin/openser[49957]: get_ha1(): > Error > > > > while querying database > > > > Sep 22 16:19:08 core /usr/local/sbin/openser[49952]: submit_query: > > > > Unknown column 'uuid' in 'field list' > > > > Sep 22 16:19:08 core /usr/local/sbin/openser[49952]: db_query: Error > > > > while submitting query > > > > Sep 22 16:19:08 core /usr/local/sbin/openser[49952]: get_ha1(): > Error > > > > while querying database > > > > Sep 22 16:19:08 core /usr/local/sbin/openser[49954]: submit_query: > > > > Unknown column 'uuid' in 'field list' > > > > Sep 22 16:19:08 core /usr/local/sbin/openser[49954]: db_query: Error > > > > while submitting query > > > > Sep 22 16:19:08 core /usr/local/sbin/openser[49954]: get_ha1(): > Error > > > > while querying database > > > > Sep 22 16:19:09 core /usr/local/sbin/openser[49955]: submit_query: > > > > Unknown column 'uuid' in 'field list' > > > > Sep 22 16:19:09 core /usr/local/sbin/openser[49955]: db_query: Error > > > > while submitting query > > > > Sep 22 16:19:09 core /usr/local/sbin/openser[49955]: get_ha1(): > Error > > > > while querying database > > > > Sep 22 16:19:11 core /usr/local/sbin/openser[49957]: submit_query: > > > > Unknown column 'uuid' in 'field list' > > > > Sep 22 16:19:11 core /usr/local/sbin/openser[49957]: db_query: Error > > > > while submitting query > > > > Sep 22 16:19:11 core /usr/local/sbin/openser[49957]: get_ha1(): > Error > > > > while querying database > > > > Sep 22 16:19:13 core /usr/local/sbin/openser[49959]: submit_query: > > > > Unknown column 'uuid' in 'field list' > > > > Sep 22 16:19:13 core /usr/local/sbin/openser[49959]: db_query: Error > > > > while submitting query > > > > Sep 22 16:19:13 core /usr/local/sbin/openser[49959]: get_ha1(): > Error > > > > while querying database > > > > Sep 22 16:19:14 core /usr/local/sbin/openser[49952]: submit_query: > > > > Unknown column 'uuid' in 'field list' > > > > Sep 22 16:19:14 core /usr/local/sbin/openser[49952]: db_query: Error > > > > while submitting query > > > > Sep 22 16:19:14 core /usr/local/sbin/openser[49952]: get_ha1(): > Error > > > > while querying database > > > > Sep 22 16:19:16 core /usr/local/sbin/openser[49954]: submit_query: > > > > Unknown column 'uuid' in 'field list' > > > > Sep 22 16:19:16 core /usr/local/sbin/openser[49954]: db_query: Error > > > > while submitting query > > > > Sep 22 16:19:16 core /usr/local/sbin/openser[49954]: get_ha1(): > Error > > > > while querying database > > > > Sep 22 16:19:16 core /usr/local/sbin/openser[49955]: submit_query: > > > > Unknown column 'uuid' in 'field list' > > > > Sep 22 16:19:16 core /usr/local/sbin/openser[49955]: db_query: Error > > > > while submitting query > > > > Sep 22 16:19:16 core /usr/local/sbin/openser[49955]: get_ha1(): > Error > > > > while querying database > > > > Sep 22 16:19:21 core /usr/local/sbin/openser[49957]: submit_query: > > > > Unknown column 'uuid' in 'field list' > > > > Sep 22 16:19:21 core /usr/local/sbin/openser[49957]: db_query: Error > > > > while submitting query > > > > Sep 22 16:19:21 core /usr/local/sbin/openser[49957]: get_ha1(): > Error > > > > while querying database > > > > Sep 22 16:19:22 core /usr/local/sbin/openser[49952]: submit_query: > > > > Unknown column 'uuid' in 'field list' > > > > Sep 22 16:19:22 core /usr/local/sbin/openser[49952]: db_query: Error > > > > while submitting query > > > > Sep 22 16:19:22 core /usr/local/sbin/openser[49952]: get_ha1(): > Error > > > > while querying database > > > > Sep 22 16:19:29 core /usr/local/sbin/openser[49954]: submit_query: > > > > Unknown column 'uuid' in 'field list' > > > > Sep 22 16:19:29 core /usr/local/sbin/openser[49954]: db_query: Error > > > > while submitting query > > > > Sep 22 16:19:29 core /usr/local/sbin/openser[49954]: get_ha1(): > Error > > > > while querying database > > > > Sep 22 16:19:42 core /usr/local/sbin/openser[49956]: submit_query: > > > > Unknown column 'uuid' in 'field list' > > > > Sep 22 16:19:42 core /usr/local/sbin/openser[49956]: db_query: Error > > > > while submitting query > > > > Sep 22 16:19:42 core /usr/local/sbin/openser[49956]: get_ha1(): > Error > > > > while querying database > > > > Sep 22 16:19:46 core /usr/local/sbin/openser[49958]: submit_query: > > > > Unknown column 'uuid' in 'field list' > > > > Sep 22 16:19:46 core /usr/local/sbin/openser[49958]: db_query: Error > > > > while submitting query > > > > Sep 22 16:19:46 core /usr/local/sbin/openser[49958]: get_ha1(): > Error > > > > while querying database > > > > > > > > In Xlite, it said Registration error 500, server internal error. > > > > What is possibility wrong in my openser server configuration? > > > > > > > > > > > > Thanks > > > > SW > > > > > > > > ----- Original Message ---- > > > > From: Live Great <livegreat007(a)yahoo.com> > > > > To: users(a)openser.org > > > > Sent: Saturday, September 22, 2007 2:03:07 PM > > > > Subject: [OpenSER-Users] how to register xlite user for testing with > > > > openser > > > > > > > > Hi, > > > > > > > > I used the following command to add xlite user, but xlite failed to > > > > register the user in openser server. > > > > # openserctl add 1234 1234 sam(a)my.domain.com > > > > > > > > where 1234 is user id and password. > > > > > > > > If this is not the correct way to add user for testing from xlite to > > > > openser, what are the alternative way I can use? > > > > > > > > > > > > Thanks > > > > SW > > > > > > > > > > ------------------------------------------------------------------------ > > > > > > > > _______________________________________________ > > > > Users mailing list > > > > Users(a)openser.org > > > > http://openser..org/cgi-bin/mailman/listinfo/users > > > > > > > > > > > > > > > >

1 0

Re: [OpenSER-Users] how to register xlite user for testing with openser
by Live Great 24 Sep '07

24 Sep '07

Hi, here is the configuration specific to avp_db_load in the openser.cfg file: route[3] { route(1); xlog("L_INFO", "Load caller preferences for uuid '$avp(s:caller_uuid)' - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); # load caller avps avp_db_load("$avp(s:caller_uuid)", "*"); avp_copy("$avp(s:cli)", "$avp(s:caller_cli)/d"); if(is_avp_set("$avp(s:clir)/n") && avp_check("$avp(s:clir)", "eq/i:1")) { # mark for anonymization setflag(28); } } I never change this configuration. Thanks SW ----- Original Message ---- From: Norman Brandinger <norm(a)goes.com> To: Live Great <livegreat007(a)yahoo.com> Sent: Monday, September 24, 2007 12:59:19 PM Subject: Re: [OpenSER-Users] how to register xlite user for testing with openser Are you issuing an avp_db_load() call with no value ? That might explain the error message. Probably be a good idea to post the config you are using. Regards, Norm Live Great wrote: > Hi, thanks very much for the suggestion. > I have added the required columns in the acc and missed_calls table. > Now when I tried to call an off-line number, it still show one error: > > ERROR:avpops:load_avps: no value for first param > > The errors related to the acc and missed_calls tables are already gone. > In xlite panel, the error message says "Call failed: Proxy > Authentication Required.". > I am not sure what happened if I call a on-line phone number. > > Thanks > SW > > ----- Original Message ---- > From: Norman Brandinger <norm(a)goes.com> > To: Live Great <livegreat007(a)yahoo.com> > Cc: users(a)openser.org > Sent: Sunday, September 23, 2007 10:50:38 PM > Subject: Re: [OpenSER-Users] how to register xlite user for testing > with openser > > Hi, > > The subscriber "username" IS the "phone number". The phone number field > in the subscriber table is only used by SERWEB. I believe the > "username" column name is better than "phone" because in SIP, the idea > of a telephone number is being blurred. > > Please refer to the online doc at: > http://openser.org/dokuwiki/doku.php/database:1.2.x#subscriber > > There is alot of material at the openser.org web site that can help you. > > The mediaproxy errors are a result of your script calling a mediaproxy > function but mediaproxy isn't running. This can be downloaded thanks to > AG Projects from http://ag-projects.com/MediaProxy.html > > The src_leg / dst_leg errors are a result of you trying to save > additional (accounting) fields into the "acc" and/or "missed_calls" > table. This is generally used for multi-leg call accounting (for > example, in a call forwarding situation where the initial callee changes > to the caller .. of the forwarded call). You will have to manually add > these column to the acc and missed_calls tables (varchar(64)) should be > fine for most purposes. > > Regards, > Norm > > Live Great wrote: > > Now is getting other errors. > > When I tried to dial a number, eg. 123 - the default Admin account, I > > got the following errors shown in /var/log/messages: > > > > ERROR:avpops:load_avps: no value for first param > > error: mediaproxy/sendMediaproxyCommand(): can't connect to MediaProxy > > error: mediaproxy/sendMediaproxyCommand(): can't connect to MediaProxy > > submit_query: Unknown column 'src_leg' in 'field list' > > db_insert: Error while submitting query > > ERROR:acc:acc_db_request: Error while inserting to database > > > > > > ----- Original Message ---- > > From: Norman Brandinger <norm(a)goes.com> > > To: Live Great <livegreat007(a)yahoo.com> > > Sent: Saturday, September 22, 2007 11:53:53 PM > > Subject: Re: [OpenSER-Users] how to register xlite user for testing > > with openser > > > > I believe the openser_mysql.sh script is being phased out. It has been > > replaced by openserdbctl (thanks to a big effort from Henning !!!). If > > your installation doesn't have /usr/local/sbin/openserdbctl I strongly > > suggest that you upgrade to a version of OpenSER that contains it. > > > > The rest of your settings appear to to be ok. > > > > Regards, > > Norm > > > > Live Great wrote: > > > > > > > > > ----- Original Message ---- > > > From: Norman Brandinger <norm(a)goes.com> > > > To: Live Great <livegreat007(a)yahoo.com> > > > Cc: users(a)openser.org > > > Sent: Saturday, September 22, 2007 9:43:54 PM > > > Subject: Re: [OpenSER-Users] how to register xlite user for testing > > > with openser > > > > > > Is is possible that you turned on database support but forgot to make > > > the database tables ? The error message you posted is pretty > explicit: > > > "Unknown column".... > > > I used openser_mysql.sh create to populate openser database and its > > > tables. > > > Here is all its tables: > > > mysql> show tables; > > > +-----------------------+ > > > | Tables_in_openser | > > > +-----------------------+ > > > | acc | > > > | active_sessions | > > > | active_watchers | > > > | address | > > > | admin_privileges | > > > | aliases | > > > | cpl | > > > | dbaliases | > > > | domain | > > > | domainpolicy | > > > | grp | > > > | gw | > > > | gw_grp | > > > | imc_members | > > > | imc_rooms | > > > | lcr | > > > | location | > > > | missed_calls | > > > | pdt | > > > | pending | > > > | phonebook | > > > | presentity | > > > | pua | > > > | re_grp | > > > | server_monitoring | > > > | server_monitoring_agg | > > > | silo | > > > | sip_trace | > > > | speed_dial | > > > | subscriber | > > > | trusted | > > > | uri | > > > | usr_preferences | > > > | usr_preferences_types | > > > | version | > > > | watchers | > > > | xcap_xml | > > > +-----------------------+ > > > 37 rows in set (0.00 sec) > > > > > > > > > > > > The warnings about missing permissions files can be ignored > (unless you > > > really do need them), but in your case, it seems that you are not at > > > that point yet. > > > > > > Take a look at openserdbctl as it automates the process of > creating the > > > database and tables needed by the various openser > modules. openserctlrc > > > (usually located in /usr/local/etc/openser) contains a number of > startup > > > settings, some of which are database related. > > > > > > The standard request you will receive from people trying to assist you > > > is to post your config file (or at least the interesting sections of > > it). > > > > > > The part of the content of openser.cfg is: > > > listen = udp:127.0.0.1:5060 > > > listen = udp:125.255.1.2:5060 > > > mpath = "/usr/local/lib/openser/modules" > > > children = 8 > > > debug = 3 > > > fork = yes > > > group = "openser" > > > user = "openser" > > > disable_tcp = no > > > log_facility = LOG_DAEMON > > > #log_facility = LOG_LOCAL7 > > > log_stderror = no > > > tcp_children = 4 > > > mhomed = no > > > server_signature = yes > > > sock_group = "openser" > > > sock_mode = 0600 > > > sock_user = "openser" > > > unix_sock = "/tmp/openser.sock" > > > unix_sock_children = 1 > > > reply_to_via = no > > > sip_warning = no > > > check_via = no > > > dns = no > > > rev_dns = no > > > disable_core_dump = no > > > dns_try_ipv6 = yes > > > dns_use_search_list = yes > > > > > > openserctlrc: > > > ## your SIP domain > > > SIP_DOMAIN=ip6.com.au > > > > > > ## database type: MYSQL or PGSQL, by defaulte none is loaded > > > DBENGINE=MYSQL > > > > > > ## database host > > > DBHOST=localhost > > > > > > ## database name > > > DBNAME=openser > > > > > > ## database read/write user > > > DBRWUSER=openser > > > # DBRWUSER=admin > > > > > > ## database read only user > > > DBROUSER=openserro > > > > > > ## password for database read only user > > > DBROPW=openserro > > > > > > ## database super user > > > DBROOTUSER="root" > > > > > > HAS_SERWEB="yes" > > > > > > I am not too sure the correct way to define openserctlrc file.. > > > Your comment is much appreciated. > > > > > > Thanks > > > SW > > > > > > Norm > > > > > > Live Great wrote: > > > > Hi, > > > > > > > > After changed the port 5077 to 5060 in openser.cfg file, restarted > > > > openser. > > > > When xlite initiate a registartion request, openser system log file > > > > shown a different message: > > > > Sep 22 16:18:55 core /usr/local/sbin/openser[49941]: Default allow > > > > file (/usr/local/etc/openser/permissions.allow) not found => empty > > > > rule set > > > > Sep 22 16:18:55 core /usr/local/sbin/openser[49941]: WARNING: > File not > > > > found: /usr/local/etc/openser/permissions.deny > > > > Sep 22 16:18:55 core /usr/local/sbin/openser[49941]: Default > deny file > > > > (/usr/local/etc/openser/permissions.deny) not found => empty > rule set > > > > Sep 22 16:19:01 core /usr/local/sbin/openser[49953]: submit_query: > > > > Unknown column 'uuid' in 'field list' > > > > Sep 22 16:19:01 core /usr/local/sbin/openser[49953]: db_query: Error > > > > while submitting query > > > > Sep 22 16:19:01 core /usr/local/sbin/openser[49953]: get_ha1(): > Error > > > > while querying database > > > > Sep 22 16:19:04 core /usr/local/sbin/openser[49956]: submit_query: > > > > Unknown column 'uuid' in 'field list' > > > > Sep 22 16:19:04 core /usr/local/sbin/openser[49956]: db_query: Error > > > > while submitting query > > > > Sep 22 16:19:04 core /usr/local/sbin/openser[49956]: get_ha1(): > Error > > > > while querying database > > > > Sep 22 16:19:06 core /usr/local/sbin/openser[49957]: submit_query: > > > > Unknown column 'uuid' in 'field list' > > > > Sep 22 16:19:06 core /usr/local/sbin/openser[49957]: db_query: Error > > > > while submitting query > > > > Sep 22 16:19:06 core /usr/local/sbin/openser[49957]: get_ha1(): > Error > > > > while querying database > > > > Sep 22 16:19:08 core /usr/local/sbin/openser[49952]: submit_query: > > > > Unknown column 'uuid' in 'field list' > > > > Sep 22 16:19:08 core /usr/local/sbin/openser[49952]: db_query: Error > > > > while submitting query > > > > Sep 22 16:19:08 core /usr/local/sbin/openser[49952]: get_ha1(): > Error > > > > while querying database > > > > Sep 22 16:19:08 core /usr/local/sbin/openser[49954]: submit_query: > > > > Unknown column 'uuid' in 'field list' > > > > Sep 22 16:19:08 core /usr/local/sbin/openser[49954]: db_query: Error > > > > while submitting query > > > > Sep 22 16:19:08 core /usr/local/sbin/openser[49954]: get_ha1(): > Error > > > > while querying database > > > > Sep 22 16:19:09 core /usr/local/sbin/openser[49955]: submit_query: > > > > Unknown column 'uuid' in 'field list' > > > > Sep 22 16:19:09 core /usr/local/sbin/openser[49955]: db_query: Error > > > > while submitting query > > > > Sep 22 16:19:09 core /usr/local/sbin/openser[49955]: get_ha1(): > Error > > > > while querying database > > > > Sep 22 16:19:11 core /usr/local/sbin/openser[49957]: submit_query: > > > > Unknown column 'uuid' in 'field list' > > > > Sep 22 16:19:11 core /usr/local/sbin/openser[49957]: db_query: Error > > > > while submitting query > > > > Sep 22 16:19:11 core /usr/local/sbin/openser[49957]: get_ha1(): > Error > > > > while querying database > > > > Sep 22 16:19:13 core /usr/local/sbin/openser[49959]: submit_query: > > > > Unknown column 'uuid' in 'field list' > > > > Sep 22 16:19:13 core /usr/local/sbin/openser[49959]: db_query: Error > > > > while submitting query > > > > Sep 22 16:19:13 core /usr/local/sbin/openser[49959]: get_ha1(): > Error > > > > while querying database > > > > Sep 22 16:19:14 core /usr/local/sbin/openser[49952]: submit_query: > > > > Unknown column 'uuid' in 'field list' > > > > Sep 22 16:19:14 core /usr/local/sbin/openser[49952]: db_query: Error > > > > while submitting query > > > > Sep 22 16:19:14 core /usr/local/sbin/openser[49952]: get_ha1(): > Error > > > > while querying database > > > > Sep 22 16:19:16 core /usr/local/sbin/openser[49954]: submit_query: > > > > Unknown column 'uuid' in 'field list' > > > > Sep 22 16:19:16 core /usr/local/sbin/openser[49954]: db_query: Error > > > > while submitting query > > > > Sep 22 16:19:16 core /usr/local/sbin/openser[49954]: get_ha1(): > Error > > > > while querying database > > > > Sep 22 16:19:16 core /usr/local/sbin/openser[49955]: submit_query: > > > > Unknown column 'uuid' in 'field list' > > > > Sep 22 16:19:16 core /usr/local/sbin/openser[49955]: db_query: Error > > > > while submitting query > > > > Sep 22 16:19:16 core /usr/local/sbin/openser[49955]: get_ha1(): > Error > > > > while querying database > > > > Sep 22 16:19:21 core /usr/local/sbin/openser[49957]: submit_query: > > > > Unknown column 'uuid' in 'field list' > > > > Sep 22 16:19:21 core /usr/local/sbin/openser[49957]: db_query: Error > > > > while submitting query > > > > Sep 22 16:19:21 core /usr/local/sbin/openser[49957]: get_ha1(): > Error > > > > while querying database > > > > Sep 22 16:19:22 core /usr/local/sbin/openser[49952]: submit_query: > > > > Unknown column 'uuid' in 'field list' > > > > Sep 22 16:19:22 core /usr/local/sbin/openser[49952]: db_query: Error > > > > while submitting query > > > > Sep 22 16:19:22 core /usr/local/sbin/openser[49952]: get_ha1(): > Error > > > > while querying database > > > > Sep 22 16:19:29 core /usr/local/sbin/openser[49954]: submit_query: > > > > Unknown column 'uuid' in 'field list' > > > > Sep 22 16:19:29 core /usr/local/sbin/openser[49954]: db_query: Error > > > > while submitting query > > > > Sep 22 16:19:29 core /usr/local/sbin/openser[49954]: get_ha1(): > Error > > > > while querying database > > > > Sep 22 16:19:42 core /usr/local/sbin/openser[49956]: submit_query: > > > > Unknown column 'uuid' in 'field list' > > > > Sep 22 16:19:42 core /usr/local/sbin/openser[49956]: db_query: Error > > > > while submitting query > > > > Sep 22 16:19:42 core /usr/local/sbin/openser[49956]: get_ha1(): > Error > > > > while querying database > > > > Sep 22 16:19:46 core /usr/local/sbin/openser[49958]: submit_query: > > > > Unknown column 'uuid' in 'field list' > > > > Sep 22 16:19:46 core /usr/local/sbin/openser[49958]: db_query: Error > > > > while submitting query > > > > Sep 22 16:19:46 core /usr/local/sbin/openser[49958]: get_ha1(): > Error > > > > while querying database > > > > > > > > In Xlite, it said Registration error 500, server internal error. > > > > What is possibility wrong in my openser server configuration? > > > > > > > > > > > > Thanks > > > > SW > > > > > > > > ----- Original Message ---- > > > > From: Live Great <livegreat007(a)yahoo.com> > > > > To: users(a)openser.org > > > > Sent: Saturday, September 22, 2007 2:03:07 PM > > > > Subject: [OpenSER-Users] how to register xlite user for testing with > > > > openser > > > > > > > > Hi, > > > > > > > > I used the following command to add xlite user, but xlite failed to > > > > register the user in openser server. > > > > # openserctl add 1234 1234 sam(a)my.domain.com > > > > > > > > where 1234 is user id and password. > > > > > > > > If this is not the correct way to add user for testing from xlite to > > > > openser, what are the alternative way I can use? > > > > > > > > > > > > Thanks > > > > SW > > > > > > > > > > ------------------------------------------------------------------------ > > > > > > > > _______________________________________________ > > > > Users mailing list > > > > Users@openser..org > > > > http://openser.org/cgi-bin/mailman/listinfo/users > > > > > > > > > > > > > > > >

1 0

Re: [OpenSER-Users] how to register xlite user for testing with openser
by Live Great 24 Sep '07

24 Sep '07

Hi, thanks very much for the suggestion. I have added the required columns in the acc and missed_calls table. Now when I tried to call an off-line number, it still show one error: ERROR:avpops:load_avps: no value for first param The errors related to the acc and missed_calls tables are already gone. In xlite panel, the error message says "Call failed: Proxy Authentication Required.". I am not sure what happened if I call a on-line phone number. Thanks SW ----- Original Message ---- From: Norman Brandinger <norm(a)goes.com> To: Live Great <livegreat007(a)yahoo.com> Cc: users(a)openser.org Sent: Sunday, September 23, 2007 10:50:38 PM Subject: Re: [OpenSER-Users] how to register xlite user for testing with openser Hi, The subscriber "username" IS the "phone number". The phone number field in the subscriber table is only used by SERWEB. I believe the "username" column name is better than "phone" because in SIP, the idea of a telephone number is being blurred. Please refer to the online doc at: http://openser.org/dokuwiki/doku.php/database:1.2.x#subscriber There is alot of material at the openser.org web site that can help you. The mediaproxy errors are a result of your script calling a mediaproxy function but mediaproxy isn't running. This can be downloaded thanks to AG Projects from http://ag-projects.com/MediaProxy.html The src_leg / dst_leg errors are a result of you trying to save additional (accounting) fields into the "acc" and/or "missed_calls" table. This is generally used for multi-leg call accounting (for example, in a call forwarding situation where the initial callee changes to the caller .. of the forwarded call). You will have to manually add these column to the acc and missed_calls tables (varchar(64)) should be fine for most purposes. Regards, Norm Live Great wrote: > Now is getting other errors. > When I tried to dial a number, eg. 123 - the default Admin account, I > got the following errors shown in /var/log/messages: > > ERROR:avpops:load_avps: no value for first param > error: mediaproxy/sendMediaproxyCommand(): can't connect to MediaProxy > error: mediaproxy/sendMediaproxyCommand(): can't connect to MediaProxy > submit_query: Unknown column 'src_leg' in 'field list' > db_insert: Error while submitting query > ERROR:acc:acc_db_request: Error while inserting to database > > > ----- Original Message ---- > From: Norman Brandinger <norm(a)goes.com> > To: Live Great <livegreat007(a)yahoo.com> > Sent: Saturday, September 22, 2007 11:53:53 PM > Subject: Re: [OpenSER-Users] how to register xlite user for testing > with openser > > I believe the openser_mysql.sh script is being phased out. It has been > replaced by openserdbctl (thanks to a big effort from Henning !!!). If > your installation doesn't have /usr/local/sbin/openserdbctl I strongly > suggest that you upgrade to a version of OpenSER that contains it. > > The rest of your settings appear to to be ok. > > Regards, > Norm > > Live Great wrote: > > > > > > ----- Original Message ---- > > From: Norman Brandinger <norm(a)goes.com> > > To: Live Great <livegreat007(a)yahoo.com> > > Cc: users(a)openser.org > > Sent: Saturday, September 22, 2007 9:43:54 PM > > Subject: Re: [OpenSER-Users] how to register xlite user for testing > > with openser > > > > Is is possible that you turned on database support but forgot to make > > the database tables ? The error message you posted is pretty explicit: > > "Unknown column".... > > I used openser_mysql.sh create to populate openser database and its > > tables. > > Here is all its tables: > > mysql> show tables; > > +-----------------------+ > > | Tables_in_openser | > > +-----------------------+ > > | acc | > > | active_sessions | > > | active_watchers | > > | address | > > | admin_privileges | > > | aliases | > > | cpl | > > | dbaliases | > > | domain | > > | domainpolicy | > > | grp | > > | gw | > > | gw_grp | > > | imc_members | > > | imc_rooms | > > | lcr | > > | location | > > | missed_calls | > > | pdt | > > | pending | > > | phonebook | > > | presentity | > > | pua | > > | re_grp | > > | server_monitoring | > > | server_monitoring_agg | > > | silo | > > | sip_trace | > > | speed_dial | > > | subscriber | > > | trusted | > > | uri | > > | usr_preferences | > > | usr_preferences_types | > > | version | > > | watchers | > > | xcap_xml | > > +-----------------------+ > > 37 rows in set (0.00 sec) > > > > > > > > The warnings about missing permissions files can be ignored (unless you > > really do need them), but in your case, it seems that you are not at > > that point yet. > > > > Take a look at openserdbctl as it automates the process of creating the > > database and tables needed by the various openser modules. openserctlrc > > (usually located in /usr/local/etc/openser) contains a number of startup > > settings, some of which are database related. > > > > The standard request you will receive from people trying to assist you > > is to post your config file (or at least the interesting sections of > it). > > > > The part of the content of openser.cfg is: > > listen = udp:127.0.0.1:5060 > > listen = udp:125.255.1.2:5060 > > mpath = "/usr/local/lib/openser/modules" > > children = 8 > > debug = 3 > > fork = yes > > group = "openser" > > user = "openser" > > disable_tcp = no > > log_facility = LOG_DAEMON > > #log_facility = LOG_LOCAL7 > > log_stderror = no > > tcp_children = 4 > > mhomed = no > > server_signature = yes > > sock_group = "openser" > > sock_mode = 0600 > > sock_user = "openser" > > unix_sock = "/tmp/openser.sock" > > unix_sock_children = 1 > > reply_to_via = no > > sip_warning = no > > check_via = no > > dns = no > > rev_dns = no > > disable_core_dump = no > > dns_try_ipv6 = yes > > dns_use_search_list = yes > > > > openserctlrc: > > ## your SIP domain > > SIP_DOMAIN=ip6.com.au > > > > ## database type: MYSQL or PGSQL, by defaulte none is loaded > > DBENGINE=MYSQL > > > > ## database host > > DBHOST=localhost > > > > ## database name > > DBNAME=openser > > > > ## database read/write user > > DBRWUSER=openser > > # DBRWUSER=admin > > > > ## database read only user > > DBROUSER=openserro > > > > ## password for database read only user > > DBROPW=openserro > > > > ## database super user > > DBROOTUSER="root" > > > > HAS_SERWEB="yes" > > > > I am not too sure the correct way to define openserctlrc file.. > > Your comment is much appreciated. > > > > Thanks > > SW > > > > Norm > > > > Live Great wrote: > > > Hi, > > > > > > After changed the port 5077 to 5060 in openser.cfg file, restarted > > > openser. > > > When xlite initiate a registartion request, openser system log file > > > shown a different message: > > > Sep 22 16:18:55 core /usr/local/sbin/openser[49941]: Default allow > > > file (/usr/local/etc/openser/permissions.allow) not found => empty > > > rule set > > > Sep 22 16:18:55 core /usr/local/sbin/openser[49941]: WARNING: File not > > > found: /usr/local/etc/openser/permissions.deny > > > Sep 22 16:18:55 core /usr/local/sbin/openser[49941]: Default deny file > > > (/usr/local/etc/openser/permissions.deny) not found => empty rule set > > > Sep 22 16:19:01 core /usr/local/sbin/openser[49953]: submit_query: > > > Unknown column 'uuid' in 'field list' > > > Sep 22 16:19:01 core /usr/local/sbin/openser[49953]: db_query: Error > > > while submitting query > > > Sep 22 16:19:01 core /usr/local/sbin/openser[49953]: get_ha1(): Error > > > while querying database > > > Sep 22 16:19:04 core /usr/local/sbin/openser[49956]: submit_query: > > > Unknown column 'uuid' in 'field list' > > > Sep 22 16:19:04 core /usr/local/sbin/openser[49956]: db_query: Error > > > while submitting query > > > Sep 22 16:19:04 core /usr/local/sbin/openser[49956]: get_ha1(): Error > > > while querying database > > > Sep 22 16:19:06 core /usr/local/sbin/openser[49957]: submit_query: > > > Unknown column 'uuid' in 'field list' > > > Sep 22 16:19:06 core /usr/local/sbin/openser[49957]: db_query: Error > > > while submitting query > > > Sep 22 16:19:06 core /usr/local/sbin/openser[49957]: get_ha1(): Error > > > while querying database > > > Sep 22 16:19:08 core /usr/local/sbin/openser[49952]: submit_query: > > > Unknown column 'uuid' in 'field list' > > > Sep 22 16:19:08 core /usr/local/sbin/openser[49952]: db_query: Error > > > while submitting query > > > Sep 22 16:19:08 core /usr/local/sbin/openser[49952]: get_ha1(): Error > > > while querying database > > > Sep 22 16:19:08 core /usr/local/sbin/openser[49954]: submit_query: > > > Unknown column 'uuid' in 'field list' > > > Sep 22 16:19:08 core /usr/local/sbin/openser[49954]: db_query: Error > > > while submitting query > > > Sep 22 16:19:08 core /usr/local/sbin/openser[49954]: get_ha1(): Error > > > while querying database > > > Sep 22 16:19:09 core /usr/local/sbin/openser[49955]: submit_query: > > > Unknown column 'uuid' in 'field list' > > > Sep 22 16:19:09 core /usr/local/sbin/openser[49955]: db_query: Error > > > while submitting query > > > Sep 22 16:19:09 core /usr/local/sbin/openser[49955]: get_ha1(): Error > > > while querying database > > > Sep 22 16:19:11 core /usr/local/sbin/openser[49957]: submit_query: > > > Unknown column 'uuid' in 'field list' > > > Sep 22 16:19:11 core /usr/local/sbin/openser[49957]: db_query: Error > > > while submitting query > > > Sep 22 16:19:11 core /usr/local/sbin/openser[49957]: get_ha1(): Error > > > while querying database > > > Sep 22 16:19:13 core /usr/local/sbin/openser[49959]: submit_query: > > > Unknown column 'uuid' in 'field list' > > > Sep 22 16:19:13 core /usr/local/sbin/openser[49959]: db_query: Error > > > while submitting query > > > Sep 22 16:19:13 core /usr/local/sbin/openser[49959]: get_ha1(): Error > > > while querying database > > > Sep 22 16:19:14 core /usr/local/sbin/openser[49952]: submit_query: > > > Unknown column 'uuid' in 'field list' > > > Sep 22 16:19:14 core /usr/local/sbin/openser[49952]: db_query: Error > > > while submitting query > > > Sep 22 16:19:14 core /usr/local/sbin/openser[49952]: get_ha1(): Error > > > while querying database > > > Sep 22 16:19:16 core /usr/local/sbin/openser[49954]: submit_query: > > > Unknown column 'uuid' in 'field list' > > > Sep 22 16:19:16 core /usr/local/sbin/openser[49954]: db_query: Error > > > while submitting query > > > Sep 22 16:19:16 core /usr/local/sbin/openser[49954]: get_ha1(): Error > > > while querying database > > > Sep 22 16:19:16 core /usr/local/sbin/openser[49955]: submit_query: > > > Unknown column 'uuid' in 'field list' > > > Sep 22 16:19:16 core /usr/local/sbin/openser[49955]: db_query: Error > > > while submitting query > > > Sep 22 16:19:16 core /usr/local/sbin/openser[49955]: get_ha1(): Error > > > while querying database > > > Sep 22 16:19:21 core /usr/local/sbin/openser[49957]: submit_query: > > > Unknown column 'uuid' in 'field list' > > > Sep 22 16:19:21 core /usr/local/sbin/openser[49957]: db_query: Error > > > while submitting query > > > Sep 22 16:19:21 core /usr/local/sbin/openser[49957]: get_ha1(): Error > > > while querying database > > > Sep 22 16:19:22 core /usr/local/sbin/openser[49952]: submit_query: > > > Unknown column 'uuid' in 'field list' > > > Sep 22 16:19:22 core /usr/local/sbin/openser[49952]: db_query: Error > > > while submitting query > > > Sep 22 16:19:22 core /usr/local/sbin/openser[49952]: get_ha1(): Error > > > while querying database > > > Sep 22 16:19:29 core /usr/local/sbin/openser[49954]: submit_query: > > > Unknown column 'uuid' in 'field list' > > > Sep 22 16:19:29 core /usr/local/sbin/openser[49954]: db_query: Error > > > while submitting query > > > Sep 22 16:19:29 core /usr/local/sbin/openser[49954]: get_ha1(): Error > > > while querying database > > > Sep 22 16:19:42 core /usr/local/sbin/openser[49956]: submit_query: > > > Unknown column 'uuid' in 'field list' > > > Sep 22 16:19:42 core /usr/local/sbin/openser[49956]: db_query: Error > > > while submitting query > > > Sep 22 16:19:42 core /usr/local/sbin/openser[49956]: get_ha1(): Error > > > while querying database > > > Sep 22 16:19:46 core /usr/local/sbin/openser[49958]: submit_query: > > > Unknown column 'uuid' in 'field list' > > > Sep 22 16:19:46 core /usr/local/sbin/openser[49958]: db_query: Error > > > while submitting query > > > Sep 22 16:19:46 core /usr/local/sbin/openser[49958]: get_ha1(): Error > > > while querying database > > > > > > In Xlite, it said Registration error 500, server internal error. > > > What is possibility wrong in my openser server configuration? > > > > > > > > > Thanks > > > SW > > > > > > ----- Original Message ---- > > > From: Live Great <livegreat007(a)yahoo.com> > > > To: users(a)openser.org > > > Sent: Saturday, September 22, 2007 2:03:07 PM > > > Subject: [OpenSER-Users] how to register xlite user for testing with > > > openser > > > > > > Hi, > > > > > > I used the following command to add xlite user, but xlite failed to > > > register the user in openser server. > > > # openserctl add 1234 1234 sam(a)my.domain.com > > > > > > where 1234 is user id and password. > > > > > > If this is not the correct way to add user for testing from xlite to > > > openser, what are the alternative way I can use? > > > > > > > > > Thanks > > > SW > > > > > > > ------------------------------------------------------------------------ > > > > > > _______________________________________________ > > > Users mailing list > > > Users(a)openser.org > > > http://openser.org/cgi-bin/mailman/listinfo/users > > > > > > > > >

1 0

← Newer
1
...
4
5
6
7
8
9
10
...
25
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users September 2007