24 Sep
2007
24 Sep
'07
6:09 a.m.
Hi, in openser.cfg file, there is a route[4] section where also involve avp_db_load():
########################################################################
# Request route 'usr-preferences-callee'
########################################################################
route[4]
{
xlog("L_INFO", "Load callee preferences for uuid
'$avp(s:callee_uuid)' - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");
# load callee avps
avp_db_load("$avp(s:callee_uuid)", "*");
if(is_avp_set("$avp(s:cfu)/s"))
{
xlog("L_INFO", "Call-forward-unconditional to
'$avp(s:cfu)' found - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");
route(8);
avp_delete("$avp(s:caller_uuid)/g");
avp_copy("$avp(s:callee_uuid)",
"$avp(s:caller_uuid)/d");
avp_pushto("$ru", "$avp(s:cfu)");
route(3);
route(14);
exit;
}
if(is_avp_set("$avp(s:ringtimeout)/n"))
{
xlog("L_INFO", "Setting ring timeout to $avp(s:ringtimeout)
secs - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");
avp_copy("$avp(s:ringtimeout)",
"$avp(s:callee_fr_inv_timer)/d");
}
}
----- Original Message ----
From: Live Great <livegreat007(a)yahoo.com>
To: Norman Brandinger <norm(a)goes.com>
Cc: users(a)openser.org
Sent: Monday, September 24, 2007 2:02:19 PM
Subject: Re: [OpenSER-Users] how to register xlite user for testing with openser
Hi, here is the configuration specific to avp_db_load in the openser.cfg file:
route[3]
{
route(1);
xlog("L_INFO", "Load caller preferences for uuid
'$avp(s:caller_uuid)' - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");
# load caller avps
avp_db_load("$avp(s:caller_uuid)", "*");
avp_copy("$avp(s:cli)", "$avp(s:caller_cli)/d");
if(is_avp_set("$avp(s:clir)/n") &&
avp_check("$avp(s:clir)",
"eq/i:1"))
{
# mark for anonymization
setflag(28);
}
}
I never change this configuration.
Thanks
SW
----- Original Message ----
From: Norman Brandinger <norm(a)goes.com>
To: Live Great <livegreat007(a)yahoo.com>
Sent: Monday, September 24, 2007 12:59:19 PM
Subject: Re: [OpenSER-Users] how to register xlite user for testing with openser
Are you issuing an avp_db_load() call with no value ? That might
explain the error message. Probably be a good idea to post the config
you are
using.
Regards,
Norm
Live Great wrote:
tables.
> > Here is all its tables:
> > mysql> show tables;
> > +-----------------------+
> > | Tables_in_openser |
> > +-----------------------+
> > | acc |
> > | active_sessions |
> > | active_watchers |
> > | address |
> > | admin_privileges |
> > | aliases |
> > | cpl |
the various openser
'uuid' in 'field list'
/usr/local/sbin/openser[49954]: db_query:
Error
query
get_ha1():
Hi,
Hi, thanks very much for the suggestion.
I have added the required columns in the acc and missed_calls table.
Now when I tried to call an off-line number, it still show one error:
ERROR:avpops:load_avps: no value for first param
The errors related to the acc and missed_calls tables are already gone.
In xlite panel, the error message says "Call failed: Proxy
Authentication Required.".
I am not sure what happened if I call a on-line phone number.
Thanks
SW
----- Original Message ----
From: Norman Brandinger <norm(a)goes.com>
To: Live Great <livegreat007(a)yahoo.com>
Cc: users(a)openser.org
Sent: Sunday, September 23, 2007 10:50:38 PM
Subject: Re: [OpenSER-Users] how to register xlite user for testing
with
openser
Hi,
The subscriber "username" IS the "phone number". The phone number
field
in the subscriber table is only used by SERWEB. I believe the
"username" column name is better than "phone" because in SIP, the
idea
of a telephone number is being blurred.
Please refer to the online doc at:
http://openser.org/dokuwiki/doku.php/database:1.2.x#subscriber
There is alot of material at the openser.org web site that can help you.
The mediaproxy errors are a result of your script calling a mediaproxy
function but mediaproxy isn't running. This can be downloaded thanks to
AG Projects from http://ag-projects.com/MediaProxy.html
The src_leg / dst_leg errors are a result of you trying to save
additional (accounting) fields into the
"acc" and/or "missed_calls"
table. This is generally used for multi-leg call accounting (for
example, in a call forwarding situation where the initial callee changes
to the caller .. of the forwarded call). You will have to manually add
these column to the acc and missed_calls tables (varchar(64)) should be
fine for most purposes.
Regards,
Norm
Live Great wrote:
> Now is getting other errors.
> When I tried to dial a number, eg. 123 - the default Admin account, I
> got the following errors shown in /var/log/messages:
>
> ERROR:avpops:load_avps: no value for first param
> error: mediaproxy/sendMediaproxyCommand(): can't connect to MediaProxy
> error:
mediaproxy/sendMediaproxyCommand(): can't connect to MediaProxy
> submit_query: Unknown column 'src_leg' in
'field list'
> db_insert: Error while submitting query
> ERROR:acc:acc_db_request: Error while inserting to database
>
>
> ----- Original Message ----
> From: Norman Brandinger <norm(a)goes.com>
> To: Live Great <livegreat007(a)yahoo.com>
> Sent: Saturday, September 22, 2007 11:53:53 PM
> Subject: Re: [OpenSER-Users] how to register xlite user for testing
> with openser
>
> I believe the openser_mysql.sh script is being phased out. It has been
> replaced by openserdbctl (thanks to a big effort from Henning !!!). If
> your installation doesn't have /usr/local/sbin/openserdbctl I strongly
> suggest that you upgrade to a version of OpenSER that
contains it.
The rest of your settings appear to to be ok.
Regards,
Norm
Live Great wrote:
>
>
> ----- Original Message ----
> From: Norman Brandinger <norm(a)goes.com>
> To: Live Great <livegreat007(a)yahoo.com>
> Cc: users(a)openser.org
> Sent: Saturday, September 22, 2007 9:43:54 PM
> Subject: Re: [OpenSER-Users] how to register xlite user for testing
> with openser
>
> Is is possible that you turned on database support but forgot to make
> the database tables ? The error message you posted is pretty
explicit:
"Unknown column"....
I used openser_mysql.sh create to populate openser database and its
> > | dbaliases |
> > | domain |
> > | domainpolicy |
> > | grp |
> > | gw |
> > | gw_grp |
> > | imc_members |
> > | imc_rooms |
> > |
lcr |
> > | location |
> > | missed_calls |
> > | pdt |
> > | pending |
> > | phonebook |
> > | presentity |
> > | pua |
> > |
re_grp |
> > | server_monitoring |
> > | server_monitoring_agg |
> > | silo |
> > | sip_trace |
> > | speed_dial |
> > | subscriber |
> > | trusted |
> > | uri |
> > |
usr_preferences |
> |
usr_preferences_types |
> | version |
> | watchers |
> | xcap_xml |
> +-----------------------+
> 37 rows in set (0.00 sec)
>
>
>
> The warnings about missing permissions files can be ignored
(unless you
> really do need them), but in your case, it
seems that you are not at
> that point yet.
>
> Take a look at openserdbctl as it automates the process of
creating the
> > database and tables needed by modules. openserctlrc
log_stderror = no
DBHOST=localhost
Live Great wrote:
core /usr/local/sbin/openser[49953]: submit_query:
> (usually located in /usr/local/etc/openser)
contains a number of
startup
settings,
some of which are database related.
The standard request you will receive from people trying to assist you
is to post your config file (or at least the interesting sections of
it).
The part of the content of openser.cfg is:
listen = udp:127.0.0.1:5060
listen = udp:125.255.1.2:5060
mpath = "/usr/local/lib/openser/modules"
children = 8
debug = 3
fork = yes
group = "openser"
user = "openser"
disable_tcp = no
log_facility = LOG_DAEMON
#log_facility = LOG_LOCAL7
tcp_children = 4
mhomed = no
server_signature = yes
sock_group = "openser"
sock_mode = 0600
sock_user = "openser"
unix_sock = "/tmp/openser.sock"
unix_sock_children = 1
reply_to_via = no
sip_warning = no
check_via = no
dns = no
rev_dns = no
disable_core_dump = no
dns_try_ipv6 = yes
dns_use_search_list = yes
openserctlrc:
## your SIP domain
SIP_DOMAIN=ip6.com.au
## database type: MYSQL or PGSQL, by defaulte none is loaded
DBENGINE=MYSQL
## database host
## database name
DBNAME=openser
## database read/write user
DBRWUSER=openser
# DBRWUSER=admin
## database read only user
DBROUSER=openserro
## password for database read only user
DBROPW=openserro
## database super user
DBROOTUSER="root"
HAS_SERWEB="yes"
I am not too sure the correct way to define openserctlrc file..
Your comment is much appreciated.
Thanks
SW
Norm
> > Hi,
> >
> > After changed the port 5077 to 5060 in openser.cfg file, restarted
> > openser.
> > When xlite initiate a registartion request, openser system log file
> > shown a different message:
> > Sep 22 16:18:55 core /usr/local/sbin/openser[49941]: Default allow
> > file (/usr/local/etc/openser/permissions.allow) not found => empty
> > rule set
> > Sep 22 16:18:55 core /usr/local/sbin/openser[49941]: WARNING:
File not
> > found:
/usr/local/etc/openser/permissions.deny
> > Sep 22 16:18:55 core /usr/local/sbin/openser[49941]: Default
deny file
> >
(/usr/local/etc/openser/permissions.deny) not found => empty
rule set
> > > Sep 22 16:19:01 > >
Unknown column 'uuid' in 'field list'
> > Sep 22 16:19:01 core /usr/local/sbin/openser[49953]: db_query: Error
> > while submitting query
> > Sep 22 16:19:01 core /usr/local/sbin/openser[49953]: get_ha1():
Error
> > while querying database
> > Sep 22 16:19:04 core /usr/local/sbin/openser[49956]: submit_query:
> > Unknown column 'uuid' in 'field list'
> > Sep 22 16:19:04 core /usr/local/sbin/openser[49956]: db_query: Error
> > while submitting query
> > Sep 22 16:19:04 core /usr/local/sbin/openser[49956]: get_ha1():
Error
> > > while querying database
> > > Sep 22 16:19:06 core /usr/local/sbin/openser[49957]: submit_query:
> > > Unknown column > > Sep
22 16:19:06 core /usr/local/sbin/openser[49957]: db_query: Error
> > while submitting query
> > Sep 22 16:19:06 core /usr/local/sbin/openser[49957]: get_ha1():
Error
> > while querying database
> > Sep 22 16:19:08 core /usr/local/sbin/openser[49952]: submit_query:
> > Unknown column 'uuid' in 'field list'
> > Sep 22 16:19:08 core /usr/local/sbin/openser[49952]: db_query: Error
> > while submitting query
> > Sep 22 16:19:08 core /usr/local/sbin/openser[49952]: get_ha1():
Error
> > > while querying database
> > > Sep 22 16:19:08 core /usr/local/sbin/openser[49954]: submit_query:
> > > Unknown column 'uuid' in 'field list'
> > > Sep 22 16:19:08 core > >
while submitting query
> > Sep 22 16:19:08 core /usr/local/sbin/openser[49954]: get_ha1():
Error
> > while querying database
> > Sep 22 16:19:09 core /usr/local/sbin/openser[49955]: submit_query:
> > Unknown column 'uuid' in 'field list'
> > Sep 22 16:19:09 core /usr/local/sbin/openser[49955]: db_query: Error
> > while submitting query
> > Sep 22 16:19:09 core /usr/local/sbin/openser[49955]: get_ha1():
Error
> > > while querying database
> > > Sep 22 16:19:11 core /usr/local/sbin/openser[49957]: submit_query:
> > > Unknown column 'uuid' in 'field list'
> > > Sep 22 16:19:11 core /usr/local/sbin/openser[49957]: db_query: Error
> > > while submitting > > Sep
22 16:19:11 core /usr/local/sbin/openser[49957]: get_ha1():
Error
> > while querying database
> > Sep 22 16:19:13 core /usr/local/sbin/openser[49959]: submit_query:
> > Unknown column 'uuid' in 'field list'
> > Sep 22 16:19:13 core /usr/local/sbin/openser[49959]: db_query: Error
> > while submitting query
> > Sep 22 16:19:13 core /usr/local/sbin/openser[49959]: get_ha1():
Error
> > > while querying database
> > > Sep 22 16:19:14 core /usr/local/sbin/openser[49952]: submit_query:
> > > Unknown column 'uuid' in 'field list'
> > > Sep 22 16:19:14 core /usr/local/sbin/openser[49952]: db_query: Error
> > > while submitting query
> > > Sep 22 16:19:14 core /usr/local/sbin/openser[49952]: Error
/usr/local/sbin/openser[49958]: db_query:
Error
> > while querying database
> > Sep 22 16:19:16 core /usr/local/sbin/openser[49954]: submit_query:
> > Unknown column 'uuid' in 'field list'
> > Sep 22 16:19:16 core /usr/local/sbin/openser[49954]: db_query: Error
> > while submitting query
> > Sep 22 16:19:16 core /usr/local/sbin/openser[49954]: get_ha1():
Error
> > while querying database
> > Sep 22 16:19:16 core /usr/local/sbin/openser[49955]: submit_query:
> > Unknown column 'uuid' in 'field list'
> > Sep 22 16:19:16 core /usr/local/sbin/openser[49955]: db_query: Error
> > while submitting query
> > Sep 22 16:19:16 core /usr/local/sbin/openser[49955]: get_ha1():
Error
> > while querying database
>
Sep 22 16:19:21 core /usr/local/sbin/openser[49957]: submit_query:
> > Unknown column 'uuid' in
'field list'
> > Sep 22 16:19:21 core /usr/local/sbin/openser[49957]: db_query: Error
> > while submitting query
> > Sep 22 16:19:21 core /usr/local/sbin/openser[49957]: get_ha1():
Error
> > while querying database
> > Sep 22 16:19:22 core /usr/local/sbin/openser[49952]: submit_query:
> > Unknown column 'uuid' in 'field list'
> > Sep 22 16:19:22 core /usr/local/sbin/openser[49952]: db_query: Error
> > while submitting query
> > Sep 22 16:19:22 core /usr/local/sbin/openser[49952]: get_ha1():
Error
> > while querying database
> > Sep 22 16:19:29 core /usr/local/sbin/openser[49954]: submit_query:
>
Unknown column 'uuid' in 'field list'
> > Sep 22 16:19:29 core
/usr/local/sbin/openser[49954]: db_query: Error
> > while submitting query
> > Sep 22 16:19:29 core /usr/local/sbin/openser[49954]: get_ha1():
Error
> > while querying database
> > Sep 22 16:19:42 core /usr/local/sbin/openser[49956]: submit_query:
> > Unknown column 'uuid' in 'field list'
> > Sep 22 16:19:42 core /usr/local/sbin/openser[49956]: db_query: Error
> > while submitting query
> > Sep 22 16:19:42 core /usr/local/sbin/openser[49956]: get_ha1():
Error
> > > while querying database
> > > Sep 22 16:19:46 core /usr/local/sbin/openser[49958]: submit_query:
> > > Unknown column 'uuid' in 'field list'
> > > Sep 22 16:19:46 core > >
while submitting query
> > Sep 22 16:19:46 core /usr/local/sbin/openser[49958]: get_ha1():
Error
> > > while querying database
> > >
> > > In Xlite, it said Registration error 500, server internal error.
> > > What is possibility wrong in my openser server configuration?
> > >
> > >
> > > Thanks
> > > SW
> > >
> > > ----- Original Message ----
> > > From: Live Great <livegreat007(a)yahoo.com>
> > > To: users(a)openser.org
> > > Sent: Saturday, September 22, 2007 2:03:07 PM
> > > Subject: [OpenSER-Users] how to register xlite user for testing with
> > > openser
> > >
> > > >
> I used the following command to add xlite user, but xlite failed to
> register the user in openser server.
> # openserctl add 1234 1234 sam(a)my.domain.com
>
> where 1234 is user id and password.
>
> If this is not the correct way to add user for testing from xlite to
> openser, what are the alternative way I can use?
>
>
> Thanks
> SW
>
>
------------------------------------------------------------------------
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser..org/cgi-bin/mailman/listinfo/users
6080
days inactive
6080
days old
0 comments
1 participants
participants (1)
-
Live Great